Takes a long time to restore

I am in the process of restoring a new iPhone. Do far, it's been restoring for 2 weeks. How do I determine if it's working correctly and if not, how do I finish it?

Unless you are running on dial up and are trying to restore from a 10GB back up this is taking way too long. I would redo the restore process and try again. If this doesn't work I would try a differen't network to attempt to restore from that back up from.

Similar Messages

Lync 2013 Client takes a long time to "restore" from taskbar

On many Windows 8 & 8.1 systems in our environment the Lync client will take anywhere from 2-10 seconds to pop up when clicked on in the taskbar. The application is running, logged in, and active. This is very frustrating to our userbase
as they will click on it multiple times and have it then act like a jackrabbit when it finally processes the requested actions.
The computers we have are brand new systems. Happens on freshly installed & updated versions of Lync 2013. Seems to be after the Lync client hasn't been clicked on, or utilized in a while. Other applications pop up instantly (zero delay)
and without any problems, it only affects Lync. I tried disabling UI animations such as fade, slide etc, which did nothing to help the issue.
This has me a bit stumped, and I'm wondering if this is a known issue or not? Hopefully there is a solution?

I wouldn't say it's dismissive, I was asking for more information. I wanted to know if it was potentially an overactive endpoint protection application or something similar, if it can't be reproduced on fresh build of Windows then something is interfering
and it's difficult to work out not knowing what all is installed. Most people don't experience the issue so I imagine another piece of software may likely be conflicting.
I do agree that it's not an answer, at the least not very useful answer. Occasionally items get marked as answer but they're more of a "closed" as the original poster never responds.
I'd suggest posting your issue in the Lync 2013 forums instead as people are less likely to watch this post now that it's already marked "answered". Work through it and see what can be found, hopefully you'll find some good information which will be
more helpful to others.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

On an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?

on an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?
I belive that the trigger is being changed on the io board, but cannot manage to reset it.
The reset process takes in the order of 0.1 sec, and since this is a time critical application, i want to get the scanning function working again faster

Dear Ian. Thank you for your reply. The problem appears to be that the scan trigger(s) are stopped, or something, by the use of the AI_setup instruction. The sytstem works perfectly until this instruction is used. My problem is in understanding what has happened since the help seems to give no detail on any interconnection between the scan system and the external analog trigger system. I have tried to reconnect the triggers, but so far unsucessfuly

I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and says 12 hours remaining. The text "Time remaining" flickers.

I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and didnt complete.
The text "Time remaining ... hours" flickers.
I set it to start restoring from the 3GS backup yesterday at 1pm and the time remaining kept on increasing. I left it overnight and at 9am this morning the progress bar hadnt moved and it said 12 hours remaining.
I don't know why its taking so long. I unplugged it and it just set up as new phone. So i did a factory reset and tried again at 4pm and it is now 12am and it says 4 hours remaining and my computer occasionally flickers. (Its not a bad computer, 2 months old, i7, 6GB RAM, Heaps of HDD space). It also messes with google chrome and i cannot browse the web at all while it is trying to restore my iphone.
I have tried restarting my laptop and should i reinstall itunes? I simply dont see why it should take longer than 20 hours to copy over 20GB of data!
Can anyone help me?
Thank you

I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)

Takes a long time to read

All of the sudden my iPod is taking a really long time to read on my computer. I will plug it in a it will take a long time for iTunes to open up. After it finally updates the iPod and I decide to update it again, it takes forever for it to read. I look at my iPod and it just stays at the Charged screen or whatever is on there. I have tried restoring it numerous times and it still does it. It will even take a really long time for it to recognize my iPod in the iPod updater. I have tried everything. It is weird because my iPod works fine and this is just happening all of the sudden.
I have also tried reinstalling the iPod updater and iTunes and still doesn't work.

Try opening iTunes first, and then connecting the iPod.
If it is showing the charged screen and shows up in iTunes, then go to file-->update iPod.
Also, how long is long?
btabz

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 250
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320,07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Stickies    Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    npsf_cef: Version: sf 3.3.1.1 [Click for support]
    Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
    DivX HiQ
    DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 999.86 GB
        Total number of backups: 60
        Oldest backup: 2012-07-15 01:16:54 +0000
        Last backup: 2015-03-29 19:28:06 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
        97%    rapportd
         3%    WindowServer
         1%    mds
         0%    fseventsd
         0%    distnoted
Top Processes by Memory: ℹ️
    155 MB    Safari
    120 MB    Finder
    86 MB    rapportd
    86 MB    WindowServer
    69 MB    mds_stores
Virtual Memory Information: ℹ️
    12.56 GB    Free RAM
    2.53 GB    Active RAM
    428 MB    Inactive RAM
    1.66 GB    Wired RAM
    1.04 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 31, 2015, 06:00:15 PM    Self test - passed
    Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
    Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
    Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
    Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
    Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
    Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
    Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
    Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

It takes a long time to open an app and sometimes it will just crash, any idea how to fix it?

My four year old Macbook Pro couldn't start yesterday and after going through solutions and all, it worked. But now it's freaking laggy and whenever I want to open an app, it takes a long time or the app will just crash. Any idea how to fix it? I really need the speed and everything back.

noeleeeen,
so you have an external hard disk, onto which you deleted/moved files from your internal hard disk, so that you now have 143 GB or so free on your internal hard disk — is that correct? Is the external disk purely for backups (e.g. a Time Machine destination), or does it function as a supplement to your internal disk?
Was it entirely your personal data files (documents, photos, movies, music, &c.) which you’d deleted or moved to the external disk, or did you also delete/move apps, libraries, &c. over there?
I’m not familiar with Echofon Lite, so I can’t comment on it, but an Apple-supplied app like the App Store shouldn’t crash.
Have you tried running Disk Utility yet, to see if its verification process gives your disks its seal of approval?

Firefox takes a long time to close since a recent update and hogs memory.

Since one of the recent updates that started using plugin containers, Firefox takes a long time to close. If I try to go back it, it tells me it is still running. I liik in Task Manager and about seven plug-in container. exe's are running and I have turned off or disabled mostplugins and addons, even Quicktime. Firefox uses an obscene amount of RAM on my XP machine and has made it sluggish. I use XP SP3. This started after you added the plugin containers in one of the recent updates earlier in the year. For the features it offers me or doesn't offer me, rather, it uses way too much RAM and is too sluggish. And takes a very long time to close out when I close the browser. It uses about twice as much RAM as it used to.

Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/Troubleshooting+plugins

Macbook takes a long time to recognize power soure

Hello,
I have a MacBook running 10.6.8 that is exhibiting some strange behavior in regards to the power source. When I plug the power cord in it takes a while, sometimes as long as 3 minutes to recognize that it the computer is no longer running on battery anymore. Similarly it takes a long time to realize it's no longer running via a power cord when I remove the power cord from the machine. In all cases it eventually catches up and makes the proper switch, but I'm a bit concerned as this behavior is relatively new. I've tried swapping out power cords and it doesn't make any difference. I only have one user on the machine but could create a test account and try to see if this behavior is account specific if someone things that is worthwhile. Another thing to note, I believe the battery level indicator is correct, because often when it catches up after I've inserted the power cord the percent full jumps a couple of digits, as if it'd been charging for a while. Does anyone have any thoughts or ideas that I could try to remedy this? So far, I've really only tried repairing disk permissions as I've never seen an issue like this before. Thanks.
-NifflerX

How long is "forever"?
Create a new user account. Log out of the original and into the new one, then put the machine to sleep. Any changes?
~Lyssa

Firefox takes a long time to load, even with add-ons and auto-update disabled

When opening firefox it takes a long time (1 minute +) to load. The computer does not display any indication that firefox is loading (often leading to 2, 3 or 4 instances of Firefox trying to start due to my impatience).
My OS is Windows Vista 32 bit
Firefox is v4.0.1

Can you check your Windows Firewall settings? It's possible that it's routing Firefox requests differently. At least one other Firefox user has reported that his Windows Firewall was set to block Firefox 3.6.

Import of Apex Application to another instance takes a long time

Hi,
I have developed an apex application which is of size -24 MB .While importing the appl to another instance it takes a long time (few hours). The imported appl is working fine so far.
What should be the ideal time for the import of this size appl ?
Is it the usual due to the size of the app or some thing is wrong with the app ?
Any one can please throw some light on this, as I am unable to figure out if it the appl issue or the DB issue.
Thanks in advance!

The application is getting imported and running, so you do not really have a problem in hand.
24M is big, but not all that big to run for hours.
The time taken depends on the resources available on the server where you are trying to import. If the load on that server is high then the resources will be shared between all the processes run on it, and the import process will run longer.
Monitor disk and CPU usage, it will provide you some clues. Try importing at offpeak time and it should run faster if there is a server resource issue.
Regards,

My iPad air 2 takes a LONG time time to charge

So I recently got a IPad Air 2 and I have used the 10w charger which it came with but it takes a LONG time to charge. In around 1 hour is only goes up around 10% and the charger gets quite hot. Also sometimes it displayed the message,"Not charging," up in the corner where the battery symbol is. Now I got the 12w wall plug charger and it's abit faster and the charger gets hot but not as hot as the other one just warm. I haven't had the message,"Not charging," yet.
Has anyone had the same issue or can help because I don't think It is a battery issue as the iPad air 2 is brand new and I only got it 2 days ago.

Mine is a new IPAD Air and I have about 50 apps - the device has been trying to download/sync my apps overnight and it is nowhere near done......I have been trying to do it through Itunes leaving it with the IMAC (syncing computer) overnight but it is nowhere near done......
The IMAC uses a wireless connection for Itunes, etc.....
As of now the IPAD Air is showing that it is downloading but I wonde whether I should shut it down and restart?
The downloads have been going on for about 12 hours.....

Why it takes a long time for my MacBook Air to turn on?

I brought my MacBook Air at a Power Mac Center to fix vertical lines on the screen. The vertical lines were removed. But since then, when I turn on my laptop, it takes a long time before it actually turns on. Sometimes, after pressing the power button, something seems to run at the upper left corner of the keyboard (near the power adapter) but it takes me practically hours before it actually turns on.
And when it is turned on already, I observed some unusual behaviors happening:
- Sometimes, while it is turned on, the battery status in the menu bar looks operating normally, but after a while, the trackpad will no longer work until the battery status says, "No Battery Available" and "Power source: Power Adapter".
- Sometimes, several horizontal lines appear on the screen then after a while the laptop will hang up.
- Sometimes, the sound sounds abnormal then after a while the sound no longer operates, and when I check the Sound at the System Preferences, it says, "No input devices found"
- Several applications do not work anymore, like Calendar, TextEdit, Reminder, Facetime, Preview and others.
Please help me figure out the problem. I cannot use my laptop as regular as before. I can no longer catch up with paper work deadlines because of these problems.

Please, help me. I need an immediate response so I could try to fix the problem because I need to use my laptop right away. Pls help.

My mac takes a long time to log on, running slow

my imac is running slow & takes a long time logging on, anyone knows why this happens?

If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
Launch the Console application in the same way as above, and select “kernel.log” from the file list. Post the dozen or so most recent messages in the log — the text, please, not a screenshot.
If there are runs of repeated messages, post only one example of each. Do not post many repetitions of the same message.

When i turn it on it takes a long time to start up and it freezes in some of the apps so I had to turn it off

Recently when I turn on my mac it takes a long time to start up and at first and in the beginning it appears with a grey screen and at the end it turns blue.
Also it freezes in some of the Apps, so it make me to turn of.
Please be kind enough to guide me to solve these problems.
I thank you in advance for your cooperation and quick response.
Best Regards
Ahmad Emami

What SP are you on? We had a similar issue w/SP6 but it was resoloved with SP7.
Michael

Takes a long time to restore

Similar Messages

Maybe you are looking for