Takes a while to close!

Hello,
I have gmail account using IMAP. Whenever I am done using mail and want to close it, its still highlights on the top corner that mail is still open trying to close. How can I fix it so that mails just closes?
Thanks,
Kash_Money

I have noticed the same behavior when closing Mail. Sometimes it hangs by itself for a few seconds, sometimes it shuts down immediately. I guess what I trying to say is, that this behavior appears to be random, and that I have learned to live with it
As for the All Mail folder under Gmail, for your IMAP Gmail account, you need to know that Gmail archives email threads as conversations - i.e. differently than with other email service providers - and that deleting certain emails in Mail, if they belong to a conversation, might/will result in deleting the entire conversation, which you may not want to do if one or several emails in that conversation are important to you. So the bottom line is you do not want to delete anything in All Mail if you save emails to individuals folders in Leopard Mail or labels if in gmail over the web. What you want to do is limit the deleting to the Trash and the Sent folders. Here is a link you might find helpful as far as deleting Sent mail in Gmail: http://mail.google.com/support/bin/topic.py?topic=12855
hope this helps

Similar Messages

  • After a crash, when Firefox is restored, I get many blank pages opening, in addition to the correct page. It takes a while to close them all.

    The new version of Firefox also seems to be crashing more than the old.

    Set the pref [http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes browser.sessionstore.max_resumed_crashes] to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen the other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />

  • The camera of my Ipone 4 is not focussing and takes blurry pictures up close...

    The camera of my Ipone 4 is not focussing and takes blurry pictures up close... I also cannot use apps like i-nigma because it won't recognise the sign.
    Can anyone help me with this?

    Hi there Brittney827,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    -Griff W. 

  • My ipod takes a while to shut off

    every time i rechage my ipod, if i try to shut it off it takes about 2-10 minutes. i have tried to unpluging it right after its done recharging but no matter what i do it takes a while to shut off. it will do everything else including play songs but i have to mess around with the play button for close to 5 min on a good day to get it to shut off.

    Try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Takes a while to play sound via audio interface on iMac

    I purchased iMac along with Focusrite Scarlett 6i6 USB audio interface and started having following problems from the beginning.
    When I play video/music on itunes, logic or whatever apps that plays sound, it takes a while(about 20 sec) to play sounds. Sometimes it does not play sounds at all until I turn the volume halfway up on Focusrite Scarlett 6i6. It happens all the time when I play sound for the first time after turning the computer on. It happens when I start using the computer after a while. Sometimes it turns off the sound even when the music/video is being played. I had problem with latest Scarlett driver and still happens after switching to class compliant mode. It seems like it takes time for the computer to wake 6i6 via USB, but I am not sure. Please help!
    computer Specifications:
    - late 2013 iMac / flash 1TB / GTX 780M / 32GB RAM
    - mavericks 10.9.2
    - Just Scarlett 6i6 connected directly via USB
    - no other devices connected, just apple bluetooth keyboard, magic mouse and touchpad
    Softwares:
    - Logic pro x latest version, Kontakt 5.3.0
    - sample rate 44
    Product Info:
    - was using latest 6i6 driver but recently switched to class compatible mode

    Well I have done the disk cleanup and it still didnt fix it. I just got this player yesterday too I have about 3.5 gigs on it. I didnt get my usb 2.0 system yet, but im just really worried about these long load times for the songs on the player. Im gona try loading some mp3s and see how those go.
    edit... I just loaded up some MP3s and they start in about 3-4 seconds. A lot faster then my WMAs from yahoo, but still I was expecting mp3s to play instantly pretty much.Message Edited by Johnwashere on 05-2-2005 2:26 AM

  • I need to download an online quicktime video for a project.  Its is 3gb so takes a while to buffer but when it buffers to about half way it stops and I have to reload the page and try again?

    I need to download an online quicktime video for a project.  Its is 3gb so takes a while to buffer but when it buffers to about half way it stops and I have to reload the page and try again?

    Let's first try updating using an installer file downloaded from the Apple Website:
    http://www.apple.com/itunes/download/

  • I had problem with my apps,they open for a while and closes with in seconds i cant acess them

    i had problem with my apps,they open for a while and closes with in seconds i cant acess them and i had this with all apss,expect apple apps

    Do you have a lot of apps? Did you use a lot of apps recently? If so, many of them may still be resident in memory even if you aren't currently using them. Double-tap the home key and you should see the app tray with a list of most recently used programs. Press and hold the icons in the tray and remove the ones you don't use often to remove them from memory. Powering off and then back on might also help.
    My wife's iPod does that sometimes, and it's usually because we run out of memory due to apps remaining in memory even when not used. The suggestion above is how we normally fix the problems.

  • Samsung screen blinks and takes a while to come on

     Why does my Samsung screen keep blinking when I press the button and it takes a long time to come on?

    Hello Gin-e,
    You should contact Samsung if you are talking about your Samsung monitor. it could be expected behavior or it might not be. I've noticed on some Samsung monitors that it takes a while to boot and the monitor doesn't come out of sleep mode very well. Sounds like you have a monitor issue though and as the monitor is not an HP monitor I wouldn't be able to provide you any information on if that behavior is to be expected or not.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • TS3212 itunes takes a while to open on windows 7

    When I open itunes, it takes a while to open up. What can I do about this?

    Hello there Tonyal8507,
    I was researching what might cause performance issues with iTunes on a Windows computer and found this lil gem. Named Apple software on Windows: May see performance issues and blank iTunes Store, found here http://support.apple.com/kb/ts4123, I think it will help you out.
    If that troubleshooting does not resolve your issue, you may want to consider recreating your iTunes library.
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/ht1451
    Regards,
    Sterling

  • Adding blog page + First upload - Takes a while! - Then watch it fly!

    I just thought that I would share this with everyone
    Having been running my site for quite a while now, without too many problems I decided that it was time to add a blog!
    I follow this forum and one thing that I have noticed in the past is comments about upload time. But luckily for me this has never really been a problem, I add one page and upload it, and never has it been unreasonable (a couple of times I had to resubmit because it didn't like a picture). But I have never changed the picture, just hit Publish again! So I was really shocked last night when I published my first blog page, two failures due to pictures and on the third attempt it went through, but it did take a loooong time..
    Looking at my iDisk, all of the .html files in the top level folder were modified during upload, but I stuck with it.
    Today I added a second entry to my blog, and I must say, WOW! Back to the old speed that i love and know!
    It seems that the first blog creation takes a while but after this all is back to normal.
    Will

    Jo
    Yes photos in both blogs.
    I have two photos the same as you, one large (I should have resized!), one not. When viewing the site you only see the smaller one.
    Yes I have RSS, and when I click the button, in safari, I get an RSS feed of my blog and the large images are there as icons, which when clicked load in safari.
    I am just off to resize them now, i think 800*600 should be enough.
    Will

  • When I plug in my iphone to my mac to charge/sync, iphoto always opens and takes a time to close. How do I stop iphoto from opening automatically please

    When I plug my iphone into my mac to charge/sync, iphoto always opens before itunes and takes a time to close. How can I stop iphoto from opening automatically please

    In iphoto go to preferences > general and al the bottom will be a drop down menu that will say connecting camera opens: just change this from iphoto to no application

  • Sending mail takes a while.

    Mail works fine, apart from it takes a while to send, or more to the point, there is a noticeable delay before the message is finally sent. I didn't have this quirk in 10.4 so why if Mail has been completely rebuilt from scratch in Leopard, this happens?
    any ideas anyone?

    I have something similar to this issue too.
    When I send an email the entire mail.app locks up until the email is sent... which could take up to a minute.
    Weird. It doesn't happen all the time, but most of the time when I'm emailing people outside of our organization

  • Downloading TRIAL CS6... "Extracting...this may take a while.." Is taking too long.

    I've used the Adobe Assistant to download the trial version of CS6, Design and Web Premium on my MAC. It has gotten all the way to the point where it says "Extracting...this may take a while...." But it's been almost 24 hours at this point. What should I do? Do I start over? Or is there something I can do to speed up this process. This is ridiculous at this point. Never had  problem like this before...

    Yes, start over. Use anotehr browser to initiate the download or use this method:
    Direct Download Links for Adobe Software
    Then extract the files manualyl using winZip or similar tools.
    Mylenium

  • Rikaichan (add-on) doesn't work at my office. It gives this error "Javascript application: the index for one or more dictionaries needs to be created. This may take a while on slower computers". And then the PC freezes. What should I do?

    I'm using Firefox 3.6.17, and have installed Rikaichan 2.02. Once I've installed the Japanese-English dictionary, I then click on Rikaichan to get it started, and it always gives a "Javascript Application" error:
    '''"The index for one or more dictionaries needs to be created. This may take a while on slower computers"'''
    Rikaichan always works fine on my laptop, but I just can't seem to install it properly at work. Is there some sort of office security screwing it up?

    venicespent,
    Boot into your Mavericks Recovery partition by hold down the command and R keys whilst booting. You'll see a screen that looks like this:
    Click on the Disk Utility item to open Disk Utility. You should see your boot drive (usually named "Macintosh HD" unless you've changed it) in the column on the left of the screen. Select your boot partition and click on the "Verify" button. Let your Mac do it's thing - if you get green text telling you that everything seems to be OK, then your disk should not be damaged. If, however, you get red text telling you that the disk needs to be repaired, click on the "Repair" button. If the disk can be repaired, you should be good to go. If the disk cannot be repaired then the drive is damaged.
    But before you do anything, make certain that you have backups!!!
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB RAM, 960GB SSD, 27” Apple Thunderbolt Display

  • It's been saying "extracting... it may take a while" for 2 days. Is this normal? What should I do?

    it's been saying "extracting... it may take a while" for 2 days. Is this normal? What should I do?

    No, it's long past the point of no return. download again using anotehr browser/ method such as described here:
    Direct Download Links for Adobe Software
    Mylenium

Maybe you are looking for

  • Values from JSP to Struts Action Class

    Dear All, Am working on a small struts project, i want to get values from JSP in the Action class, i tried with sending variables using request through URL, it works fine, any other way is there to send the values from JSP to action class. Am not hav

  • Error Message when trying to open my email inbox

    Hi, I have been using email on my 6230i for few months without problem. I can still connect to recieve emails on my phone, but as soon as it starts to download I get an error message and then the option to dismiss. Once you click dismiss I get a blan

  • Trust relationship after upgrading to Windows 8.1

    Hi I have recently upgraded 20 laptops to Windows 8.1, lately some of the laptops keep saying trust relationship cannot contact to domain, I have taken them off the domain and then put them back on, the laptops then work again but each day with some

  • Sound and brightness buttons don't work, any suggestions?

    Hi guys, I just bought a MacBook Pro, and I can't control the volume and the bightness by the keyboard button. Do to so, I have ti to it by the icones in the top bar. How can I set these hotkeys on my keyboard? Any suggestions? Thank you and happy ne

  • Updates to the Reference Library

    I have a large number of photos that I manage using Aperture. The photos are stored outside of Aperture in directories within Finder. There are occasions where I update a photo outside of Aperture (using Photoshop) and the save the item back in in th