Takes out of alignment within track

I'm using Logic Express 8. I recorded a vocal track a couple of days ago. When I went to comp the takes today, some of the takes were no longer aligned with the piano. The ones that were off were consecutive and appear to be off by the exact same amount. Any ideas on how to fix this?

I have seen this in the past when the dimensions of the overlay don't match the frame size. It has been a few versions since pixel aspect ratios have been an issue, such as on 16:9 Pan&Scan menus. However, I bet if you go to your photoshop file, you may find that there is some layer in there that has some leftover pixels outisde the canvas. A quick select all-crop will do the trick there. By opening your build or the image in DVD Player you should be seeing pretty much what any othe player would show (avoiding any Simulator-specific anomalies) so I would definitely try to track this one down.
Hope this helps -
Max Average

Similar Messages

Can I take out the vocals on a track using garageband?

I was wondering if it is possible to take out the vocals in a song/track using garageband???

Charlene7 wrote:
I was wondering if it is possible to take out the vocals in a song/track using garageband???
no:
http://www.bulletsandbones.com/GB/GBFAQ.html#removevocals
(Let the page FULLY load. The link to your answer is at the top of your screen)

ITunes refuses to let me drag tracks in or out of or within playlists

With no pattern, just nasty surprises, iTunes refuses to let me drag tracks in or out of or within playlists.
I have searched the Apple Support Communities and elsewhere and found no solutions which work.
It's nothing to do with Wacom - I don't have one. It's nothing to do with setting iTunes to manual sorting. It's not set to shuffle or repeat. It's just an ordinary playlist. It's not a folder nor a Smart playlist.
On one occasion I phoned Apple and a nice man told me how to display the Library (but it's now hidden again) and delete an iTunes preference file. This solved the problem for a while. But I have forgotten how to display the Library again and can't remember the name of the preference file to delete.
Anyway, the problem should have been fixed by now we are at V 10.6.3
If there is no solution then I am stuck with copy and paste - a very unsatisfactory system when I am playing a playlist live.

Found the answer myself (from a tip in another thread):
You have to reboot both your Mac and your iPhone...

How to PUT MUSIC and take out background sound

First of all, hats off to apple for iMovie 08'...I love it!
I was just wondering...how do I put music in the background that way i can completly block out the noise in my actual video footage?
Like say if I was making a MUSIC VIDEO...and all I need was the MUSIC that I am going to add to the project...how would I specifically take out the sound from my video then, that way you dont hear the people talking or anything...you just hear the good quality sound music??

Once you have the music track layered in, select it and then push the Adjust Audio button within the middle toolbar (looks like a loudspeaker). You then check the box titled "Reduce Volume of Other Tracks". That should do it.

Completely new macbook pro 15" screen out of alignment.

Hi,
I ordered my first Macbook pro 15" retina on december 24th 2013 as a Christmass gift for myself. I recived it on my address January 2'nd i unboxed it an was really happy about, the only thing that annoyed me a bit was that the sceen is like half a milimeter to 1 milimeter out of allignment with the body, i know this isn't alot but i am a bit of a perfectionist so it annoyed me a little, so i told myself that it might just be normal that it is a little out of allignment.
but today my girlfriend recived her Macbook pro 13" retina, and it is perfectly alignet with the body, so i decided that i had to ask in here if this is a common thing,
Do i have to worry about this? will my screen become lose or even more out of alignment over time? or am i just to way sensetive and have to take a chill pill
But again i paid almost 3000$ for the Macbook with Apple Care, so i dont want to walk around being worried about it having a failure from the factory,
And 3000$ is alot of cash when you under education like me.
i live in Denmark so i can't just take it to a Apple store and ask them to look at it, and if i have to return it then i have no laptop and i have quite alot of homework atm :/

I called them and described the problem, and the guy in the phone immediately told that he was sorry, and that he will get me an other Macbook pro as fast a possible, and then he will send TNT to pick up my old one when i have recieved the new one.
I should recieve a new Macbook on monday, and TNT will call me within 48 hours to arrange the pick up of my old Macbook,
Awesome service, i can't affort 1 day without my Macbook and because of this awesome service i wont have to

HP LaserJet Pro 200 color M251nw Printing Out of Alignment

Images and color text print out of alignment.
The issue started the first day we had the print. It has taken me a while to get into diagnosing it but I have tried the following:
I have tried replacing the toner cartridges with new ones (expensive). The problem occured even with the original starter cartridges.
I have tried a full printer reset.
I have tried leaving the printer unplugged from power for 24 hours.
I have tried several alignment features within the printer menu.
Printing black alone is fine. All other colors do not line up with each other or with the black. Creates a 3D-ish kind of effect.
The printers quality report shows all colors areprinting fine but not aligned to one another.
I have included scans of a part of a rainbow print that illustrates the misalignment as well as the quality report page.
This question was solved.
View Solution.

Thanks for letting me know James_LAG.
At this point it does look like a hardware issue with the printer. Please call our technical support and inquire about a replacement printer, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Contact HP.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Pages 5.2 - When I try to reorder different pages it just takes all the pages within the document and turns them into a stack! Why is this happening and how can I oder pages as the update is meant to let me?

When I try to reorder different pages it just takes all the pages within the document and turns them into a stack! Why is this happening and how can I oder pages as the update is meant to let me?
Any Help?I know the update has only been out a while but if anyone has an idea why it is doing this, please let me know!

But you are telling me something I already know.
Be precise.
It is not Pages '09 that is broken.
I am back in Mavericks and testing Pages 5.2.
There are improvements, we shall see how useful, but in less than a minute I have already discovered bugs.
Peter

Spry menu out of alignment in IE

Not sure if this is the right place ... I am new to Dreamweaver and CSS but I have created a spry menu (horizontal) and everything looks good in all browsers except IE, the main container which is green is out of alignment with the menu bar at the top. I have been fiddling with this for weeks. Any help would be much appreciated. The link is as follow:
www.whiterockchristiansciencechurch.com/bctestmay12/
thanks.
L*
PS please reply in language that a rookie can understand.

Hi Gramps
Thank you … I took a look at the web address you sent me, but couldn’t figure out what I was supposed to do with it! Then I tried setting the individual widths of the menu items and this has improved the appearance in IE to the point where I can live with it. What puzzles me though is why, if the cumulative total of the menu items measure 946 px and the ‘main‘ div also measures 946, they don’t exactly match up exactly lengthwise.
Also your comment about not using ‘absolute’ positioned divs … I have been learning Dreamweaver from the Adobe manual and it recommends that you use absolute positioning for the ‘main’ div and so I thought everything else within the container (other than the container itself which I have set to relative) should be absolute. Are you saying that I should not use absolute for the main div or are you just referring to the menu div? If I don’t use absolute what should I use?
Thanks so much for your assistance, most appreciated.

Ipad 2 with version 8.1.3; update to take out bugs etc and now every time I click on an app it asked for my itunes id before I can get it to open; any help would be appreciated

I did the update to take out bugs etc; now when I try to open an app, it asks for my Itunes ID before it will open; this is a pain; has anyone else had this problem or knows how to correct this, assistance gratefully appreciated, thanks

Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

Macbook optical drive/ out of alignment?

I was just about to burn a DVD when I realized my computer wont take the disk
theres no disk in it. It appears I could force the disk in but I dont want to do that.
Is it out of alignment? is that covered in the standard apple warranty?
This happened on my previous iBook and the tech guy said it was my fault (I bent something?), but it was so easy he fixed it for free.

Try rebooting your machine. I have had the drive mechanism get stuck and rebooting made it cycle. If this happens often you should get it serviced.

Can I take out the underlines in photo gallery?

Can I take out the underlines in photo gallery? I mean the underlines for "Back to Album", "Previous" and "Next". I understand they are functional but I just don't think they look great with the whole composition. Thank you!

This might work:
Create a dummy hyperlink on that page and set the color, rollover color and underline options that you want on those links. Click a couple of times on the *Use for New Links on Page* button. Delete the dummy hyperlink and republish. That should change the links you mentioned.
OT

Did they take out the free section, you know where they might offer a free episode/song/video/etc in one spot (or at least did they for Canada)? I can find the english song of the week, but that is it...

Did they take out the free section, you know where they might offer a free episode/song/video/etc in one spot (or at least did they for Canada)? I can find the english song of the week (I used to enjoy browsing both the english and french), but that is it...

Nevermind. For some reason it loaded wrong/poorly/? It was back after I closed itunes down and re-opened it.
Thanks though

Need help Take out the null values from the ResultSet and Create a XML file

hi,
I wrote something which connects to Database and gets the ResultSet. From that ResultSet I am creating
a XML file. IN my program these are the main two classes Frame1 and ResultSetToXML. ResultSetToXML which
takes ResultSet & Boolean value in its constructor. I am passing the ResultSet and Boolean value
from Frame1 class. I am passing the boolean value to get the null values from the ResultSet and then add those
null values to XML File. When i run the program it works alright and adds the null and not null values to
the file. But when i pass the boolean value to take out the null values it would not take it out and adds
the null and not null values.
Please look at the code i am posing. I am showing step by step where its not adding the null values.
Any help is always appreciated.
Thanks in advance.
============================================================================
Frame1 Class
============
public class Frame1 extends JFrame{
private JPanel contentPane;
private XQuery xQuery1 = new XQuery();
private XYLayout xYLayout1 = new XYLayout();
public Document doc;
private JButton jButton2 = new JButton();
private Connection con;
private Statement stmt;
private ResultSetToXML rstx;
//Construct the frame
public Frame1() {
enableEvents(AWTEvent.WINDOW_EVENT_MASK);
try {
jbInit();
catch(Exception e) {
e.printStackTrace();
//Component initialization
private void jbInit() throws Exception {
//setIconImage(Toolkit.getDefaultToolkit().createImage(Frame1.class.getResource("[Your Icon]")));
contentPane = (JPanel) this.getContentPane();
xQuery1.setSql("");
xQuery1.setUrl("jdbc:odbc:SCANODBC");
xQuery1.setUserName("SYSDBA");
xQuery1.setPassword("masterkey");
xQuery1.setDriver("sun.jdbc.odbc.JdbcOdbcDriver");
contentPane.setLayout(xYLayout1);
this.setSize(new Dimension(400, 300));
this.setTitle("Frame Title");
xQuery1.setSql("Select * from Pinfo where pid=2 or pid=4");
jButton2.setText("Get XML from DB");
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(java.lang.ClassNotFoundException ex) {
System.err.print("ClassNotFoundException: ");
System.err.println(ex.getMessage());
try {
con = DriverManager.getConnection("jdbc:odbc:SCANODBC","SYSDBA", "masterkey");
stmt = con.createStatement();
catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
jButton2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
jButton2_actionPerformed(e);
contentPane.add(jButton2, new XYConstraints(126, 113, -1, -1));
//Overridden so we can exit when window is closed
protected void processWindowEvent(WindowEvent e) {
super.processWindowEvent(e);
if (e.getID() == WindowEvent.WINDOW_CLOSING) {
System.exit(0);
void jButton2_actionPerformed(ActionEvent e) {
try{
OutputStream out;
XMLOutputter outputter;
Element root;
org.jdom.Document doc;
root = new Element("PINFO");
String query = "SELECT * FROM PINFO WHERE PID=2 OR PID=4";
ResultSet rs = stmt.executeQuery(query);
/*===========This is where i am passing the ResultSet and boolean=======
===========value to either add the null or not null values in the file======*/
rstx = new ResultSetToXML(rs,true);
} //end of try
catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
======================================================================================
ResultSetToXML class
====================
public class ResultSetToXML {
private OutputStream out;
private Element root;
private XMLOutputter outputter;
private Document doc;
// Constructor
public ResultSetToXML(ResultSet rs, boolean checkifnull){
try{
String tagname="";
String tagvalue="";
root = new Element("pinfo");
while (rs.next()){
Element users = new Element("Record");
for(int i=1;i<=rs.getMetaData().getColumnCount(); ++i){
tagname= rs.getMetaData().getColumnName(i);
tagvalue=rs.getString(i);
System.out.println(tagname);
System.out.println(tagvalue);
/*============if the boolean value is false it adds the null and not
null value to the file =====================*/
/*============else it checks if the value is null or the length is
less than 0 and does the else clause in the if(checkifnull)===*/
if(checkifnull){
if((tagvalue == null) || tagvalue.length() < 0 ){
users.addContent((new Element(tagname).setText(tagvalue)));
else{
users.addContent((new Element(tagname).setText(tagvalue)));
else{
users.addContent((new Element(tagname).setText(tagvalue)));
root.addContent(users);
out=new FileOutputStream("c:/XMLFile.xml");
doc = new Document(root);
outputter = new XMLOutputter();
outputter.output(doc,out);
catch(IOException ioe){
System.out.println(ioe);
catch(SQLException sqle){

Can someone please help me with this problem
Thanks.

Take out multiple values from a db and handle them in an applet.

I have a db with tables. I want to take out several values from them and make them visible in a JFrame (or applet).
I dont know how to do. I have an app that connects to the db and selects the values and puts the Strings in a Vector. But now then?
I have looked at examples that retrieve Strings but not vectors, isn't that possible?

Hi,
On initialization of your frame you can loop over your vector and display them.
Now the problem is in what type of component do you want to put your data.
I can give you an example.
What you can do is create a String which will contain all the data from
your vector and set that string to the component.
Example:
Vector data;
String result;
for(int i=0; i < data.size(); i++) {
result += (String)data.elementAt(i) + "\n";
Now you need to put the string into a component which is easy done.
Let take a textarea component.
JTextArea txaTest = new JTextArea();
txtTest.setText(result);
Now all the data will be shown in the textarea component on your frame.

I am trying to take out my fan in my Compaq Presario CQ50 but I can't access it....?

I am following this guide (http://www.insidemylaptop.com/remove-mot… and I skipped removing the memory, WIFI, and DVD. I don't want to do all that. Right now I am at the part where you take over the top cover but I can't get it off. Do I have to go through removing the memory, etc; ???
13 minutes ago
- 4 days left to answer.
Additional Details
I have to either replace it or clean it. I can't just take out the screws in the back (it doesn't look like they come out. I was trying to unscrew one for an hour.)
3 minutes ago

If you were having your appendix removed would you want the surgeon to skip a few steps? Follow the Service Manual would be my best advice, sir. I have not personally taken apart CQ50 but there are likely screws inside the memory compartment or under the optical drive that can only be reached by removing the memory, DVD drive, wifi card, etc. If you do not remove the wifi card and antennae leads the antenna will be in your way holding the top and bottom halves together.
Official Service Manual

Takes out of alignment within track

Similar Messages

Maybe you are looking for