Taking a long time to load a YouTube video and then it will not play
Trying to watch youtube videos and connection from news source. It has been taking along time to load and then will not play... Do I have a setting off any ideas? This has not been the case until recently
Try to restart using your installer disk, by inserting your installer disk and restart while pressing C.
And after it reboot using installer disk and you select the installer language, got o utilities and repair permission and disk.
Also try to reset your PRAM and SMC:
http://docs.info.apple.com/article.html?artnum=303319
http://docs.info.apple.com/article.html?artnum=2238
IF the problem still presist, you might have to re-install your OS X.
Good Luck.
Similar Messages
-
when i plug my ipod into my computer it no longer takes me to itunes. my ipod screen is a white blank and i can no longer listen to tunes i have downloaded.
at one point i received a message that said it was corruped.My ipod has a white screen.
This forum category (where your question appeared) is for iPod shuffle, which has no screen. What iPod model do you have?
When you connect the iPod to your computer, and run iTunes, the iPod does not appear in the sidebar, under DEVICES?
At one point i got a message that it was corupted.
Where and when did this message appear? -
Edge Animate .oam files taking a long time to load or not loading at all?
http://pierosalardi.businesscatalyst.com
Is there a way to correct this? I have exported this Muse Site and uploaded into my server and the same thing is happening: http://pierosalardi.com/animate/ Its taking to much time to load the .oam files and sometimes they do not load at all.
This is a screen shot after reseting Safari and going to the site. If you see, there is no logo on the up right hand corner, or the icons at the bottom of the page
This is another screenshot after reloading the site. Some how all the .oam files came together but only after reloading the site.
Is there a way to correct this? I saw in another post that needed to replace the iFrame on the Muse html file and replace it with the html code generated by Edge.
Couldn't get it to work.Hey Piero,
Love your site! I'm not seeing the loading issue, but I'm also on a fast connection so that might be it.
Took a look at the source - it looks like each button is it's own individual OAM file, which increases your load time due to the extra requests the browser has to make to load everything. Have you tried consolidating the left and right button groups into two Animate projects instead of having a seperate one for each button? This may solve your loading problems.
You can copy and paste between projects inside of Animate so aggregating the buttons into one file should be pretty snappy.
Sarah -
Reports taking unusually long time to load
Gurus,
I am using BO 4.1 SP1. I am trying to open a report on BI launchpad. But it is taking very long time to load. This occurs even when i am trying to access the last instance. Window remains in the following state.
I checked load on the server. But tha'ts fine. What could be the issue?Hi,
Ok, that's strange because the connection server doesn't actually handle data processing.
(that would typically be the WebiProcServer or DSL_Bridge or DF service (depending on workflow))
My advice would be to turn off 'refresh on open', change viewer technology to "web view" (as opposed to Java rich internet client) and start investigating again from that baseline.
Also, this might be indicative of a BIplatform sizing or APS configuration issue. another option: have you upped your memory allocation to the Tomcat config?
Regards,
H -
Sharepoint Report is taking very long time to load
SharePoint(2010) Report is taking very long time to load and display in first attempt but from the next attempt it loads and display result normally. It's urgent..please help how to troubleshoot ...
Hi Kunal,
is there multiple report viewer webpart on page? if so then SharePoint doesn't do well with multiple report viewer web parts. if possible then merge the reports in one.
Try to implement SSRS caching/ Database snapshots for reporting services, it will help you to improve the performance:
reference: http://msdn.microsoft.com/en-us/library/bb522786.aspx
Technet article to troubleshoot report performance:
Troubleshooting Reports: Report Performance
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP) -
What's in the apple TV update that came out tonight? It's taking a long time to load.
What's in the apple TV update that came out tonight? It's taking a long time to load.
Apple TV Software Update 5.2
Feature
Summary
iTunes in the Cloud
Browse and play your purchased iTunes music directly from iCloud. This feature may not be available in all countries.
Bluetooth keyboard
Use your Apple Wireless Keyboard to control your Apple TV. See this articlefor more information.
AirPlay audio for videos
Send stereo audio from movies, TV shows, and other videos on Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs).
Stability and performance
Includes general performance and stability improvements.
If it's taking awhile to load it could be due to slow network speed or interference. It's around 600MB. If on ethernet, some have reported issues, try wifi. -
OEM Grid Control taking a long time to load tablespace information
We use OEM Grid control to monitor many dev/tst/prd databases. OEM is taking a long time to load the tablespace page information on one of our RAC databases (only one all other dbs ok). I have tried going to 1 instance in the environment and it still takes a long time to load the information about all tablespaces in this database. OEM Path is
Cluster: crs > Cluster Database: sid > Database Instance: sid_instance1 > Tablespaces
This is a development environment and it is not a very busy database at this time. Anyone else encounter an issue like this with OEM?
Thanks in advance for any informationuser12192488 wrote:
Purge your recyclebin. I had the same problem on one of our databases and realised that the recyclebin was very large. OEM uses the space from the recyclebin as well in order to load tablespace and datafile information.
SQL> purge dba_recycebin;
Worked for me.
Regards,Thanks,
It worked perfectly !
It used to take 4 minutes to view my tablespaces in OEM !!! Now I have sub second response time !
Still find it strange that the size of the recyclebin would have such an effect when viewing tablespace info in OEM. By the way it also sped up the viewing of datafiles in OEM.
Regards,
Mark T. -
My iPad will not play sounds on certain applications. ie: if I click on a video from FB sound will not play. If I go to YouTube and play the same video sound will play. Also certain games will no longer play sounds. They always played sounds but now won't now. I just went to my churches web site to watch live service and again no sound. I grabbed my dads iPad and the sound works fine.
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
?My music and pod casts will not play. I have followed the instructions many times. I would like to toss this equipment. help please.
What happens when you try?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all media and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Quicktimes taking very long time to load-Big Q appears instead.
When posting ipod (small) quicktimes to my .mac account (4 per page), the site is taking a really long time to load-a large Q appears instead of the usual Quicktime video frame for a few minutes. They eventually load, but it takes a long time. I've used this program and these files for a year without incident, and now there is this huge delay for my clients. The files aren't very big 2MB-20MB.
Maybe it's my Safari or Firefox acting up?
Here's the site if anyone is able to have a quick look and tell me if it loads quickly on their machine:
http://web.mac.com/chopperfilms/iWeb/Steve%20Gaskin/Projects%201.html
Any thoughts would be greatly appreciated. Thanks so much.To wait for 27MB to load is too big or rather long wait for your audience/visitor. Set poster frames for all and use movie ref to load only the one the visitor chooses so they don't get the letter 'Q' and use 'fast start' so loading long or big files feels like less waiting. Were poster frames and movie refs getting done automatically by iWeb before?
I am actually getting the letter 'Q' with a question mark in it 60/40 percent of the time in a QuickTime I posted which I am trying to figure how to get rid of. -
DIAdem taking a long time to load 700MB TDMS file to data portal
I'm trying to load a 700MB TDMS file into DIAdem ,4 channels 10Hz sampling rate over 4 days . When i drag the file into the data portal , diadem freezes up , its on a 2GB machine, file located on the desktop, not running any other programs and it went 50min without being able to load before i made it quit. seems to work fine on smaller files though . Was wondering if this sounds normal and if anyone knows a way around it.
yin
Solved!
Go to Solution.Thanks for all your input.
YongqinYe and Brad : I've tried defragmenting but this also seems to be taking a long time (in excess of ) on 2 different machines. The index file is 300MB, so about 75% of the *.tdms,
Otmar: i also tried registry loading the data but this still took a long time on this particular file although it worked great on smaller files (5MB).
Brad : the file does not open in the labVIEW TDMS viewer although i'm able to view it in chunks of 65000 using the TDMS importer for excel.
Stefan: the file does have explicit time stamp channel .
Any extra help would be appreciated but the way I'm thinking of doing it now is to use much longer buffer size (from only 6 to a few hundred) when collecting the data to decrease the level of fragmentation. -
Ichat taking a long time to load
When I was trying to load ichat the other day it took forever to load. Also the computer made a thud system sound. What was the sound all about? Also what is up with the long load time? I was using a wireless connection at the time. Please Help.
Hi David,
It sounds like your computer was taking a long time to read the app from the Hardrive.
The "Thud" does not sound good to pardon the pun.
Is everything working ok now ?
Use Disk Utility in Applications/Utilities to check the drive/disk
9:53 PM Sunday; July 2, 2006 -
FF 6.0.2 still having problems with pages taking a long time to load.
Seems that news websites take a long time to load properly
skynews.com kirotv.com are two I use everyday. First time I load the pages, FF seems to have a problem, when I go back to them later, all seems to load fast. This problem happens any time of day.Did you make any drastic changes to your PC before upgrading to 6.0.1? If not maybe you could do a clean install of Firefox then see what happens. Remember to save your bookmarks, settings, etc. first before uninstallling.
-
Particular webpages taking a long time to load
Around 80% of the time webpages are loading fine but I'm experiencing frequent problems with a number if sites (outlook.com, google etc.) where the webpage won't load or it will take a long time to load. I've tried loading the pages on IE, Firefox and Chrome, I've cleared the cache on each broswer, cleared my dns cache and the problems still persists. Turning off the Homehub firewall fixed the problem but I don't want to keep the firewall off.
Any suggestions or advice much appreciated.Try a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 second. This can often sort out configuration problems.
-
i have done an online payment for the new mac os. and the downloading is taking a long time . why is it so. its been more than half a day.
also my internet was down for a couple of minutes and so does this affect the integrity of the software and would it be corrupted.
if the software is downloaded is corrupt will i be able to retrieve another copy or have i lost my money in thos.My download took about 4 hours on a 6 Mbps connection, and I noticed from the winking router light that it paused from time-to-time. The download was successful. It operated perfectly, probably because I did a clean installation rather than the simpler upgrade.
Maybe you are looking for
-
How do I set up a rescue email for my existing apple ID?
The question is pretty self explanitory, but there is a long story that led me to this question. Basically I just got a new iPhone 5 on the second and iTunes keeps asking me to verify myself. So when I do, and I'm positive I'm answering the security
-
I just moved from Australia to Canada. I got a new SIM card and number and have my phone working fine. But when I am texting, my old, Australian number keeps showing up on people's phones. I have gone into Settings-Messages-Send&Receive to change i
-
Using weblogic security roles in authentication: weblogic 9
Hi All, I am trying to create a simple application which uses declarative authorization configured in web.xml. I use the simple form based authentication. While trying to deploy my application, I get the error: weblogic.management.DeploymentException
-
How do I do this. Users without FormsCentral accounts or accounts with unverified email addresses cannot receive email notifications. No notifications will be sent until the accounts are created and verified.
-
I have 2 UILoaders that sit on top of each other. One loads a SWF that the user needs to be able to interact with. The other loads a PNG with transparency that gives the SWF a border. The border edges are not rectangular, and, as such, the PNG needs