Taking Fonts out of the systems folder! Will not start up HELP!!!!

My wife took the fonts out of the system folder and did not put them back and restarted!!! HELP!! only have Panther CD's

I replied to your other post in Installation & Setup here.

Similar Messages

I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?

I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?

If the OS X 10.2 on the hard drive is/was bootable, try this -
Restart or boot, then immediately press the X key, keep it held down until you know the machine has started to boot using OS X. This is a hardware instruction to the Mac to boot using the first usable instance of OS X it finds.
Once booted to OS X, you should be able to move OS 9's System file into OS 9's System Folder.
Note - in general, unless you know for sure what you are doing and that the results are desired, do not relocate or rename files in OS 9's System Folder or in OS X's System or Library folders.

TS2834 I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps saying "Mail cannot open because of a problem" and something about not being compatible ??? Help! I miss my mail

I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps giving me an error like "Mail cannot open because of an error and something about it not being compatible. Please help! I miss my mail

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

HT5624 my apple id account has been disabled for security reasons. I have re-set my password numerous times but the system still will NOT let me sign in. It continues to say your account has been disabled.

my apple id account has been disabled for security reasons. I have re-set my password numerous times but the system still will NOT let me sign in. It continues to say your account has been disabled.

CALL
1-800-MY-APPLE (1-800-692-7753) let them know and they will helo you enable the account. even if you change the password 50 times the account will stay disable till you call them
good luck

UI API server is unavailable, the installation process will not start!

Hello Experts!
SBO VERSION IS: 2007A SP01 PL05
We are trying to install a partner solution's ADDON and we recives Error message:
"UI API server is unavailable, the installation process will not start"
I have deleted the folder: SM_OBS_DLL from temp folder
Re: UI API server is unavailable
But it didnt helped...
Your help please...
BR,
Meital
Edited by: meitalmo on Jun 30, 2010 11:18 AM
Edited by: meitalmo on Jun 30, 2010 11:20 AM

Hi ,
You may check following thread:
[Re: Connection to UI API Error]
Thanks
Ashutosh T

IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

Try this:
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

Corefoundation.dll is not found because the applesyncnotifier.exe will not start?

After my laptop boots up, I get an error message that says the applesyncnotifier.exe will not start because the corefoundation.dll is not found?
I did a serch and found the corefoundation.dll on the laptop but can't find the apple syncnotifier.exe.
Does anyone have a fix for this that doesn't require you to download a program that will fix your computer for a fee?

- First I would
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
- Next see if this helps
Trouble installing iTunes or QuickTime for Windows
- Last, try posting in the iTunes forum.

The Macbook Pro will not start past the grey Apple logo screen? Any help will be most welcome?

The Macbook Pro 13, late 2009 will not start past the grey Apple Logo screen? Any help will be most welcome? Thanks

Have you tried booting with the install disc that came with your computer?
Find it and then run Disk Utility to verify your hard drive. If errors are found, try to repair the disk.
It sounds as if the hard drive might be failing.
Clinton

TS1440 Flashing circle prohibition sign, Mac will not start. Help!

Hi there,
I need some guidance can some techie please help me!
My Mac book pro, 10.6 will not start, a flashing prohibition sign and a folder with a question mark appears on my screen.
I have shut down and tried thePRAM start up but nothing. I have snow leopard disk, should I re install. Will I lose all my data?
I recently updated iTunes and a day later my computer crashed. Any help would be appreciated.
Love,
Kind stranger

If your machine was upgraded to OS X 10.7 Lion or 10.8 Mountian Lion, then DO NOT PROCEED!
The 10.6 disks cannot be used for 10.7 or 10.8, if that's the case, then let me know as a different method is involved.
On the second screen booted from the 10.6 disk, under Utilities menu is Disk Utility.
Select your entire internal boot drive on the left, it should have a name and a size.
Click First Aid > Repair Disk and Repair Permissions.
If the drive doesn't appear on the left, it may mean it's dead or there is a broken connection between the drive and the computer.
If Disk Utility says "can't repair, backup and erase and install" then the drive works, it's that it can't repair the file structure, likely because of a failed sector on the drive (may be natural or caused by shock or failing drive)
However you don't have to erase if it says to do so, if the drive works mechanically the data can be recovered.
The drive may work fine if removed from the machine as well if it's not showing up on the left in Disk Utility.
If the drive doesn't work, then the data can be recovered if it wasn't Filevaulted, but the platter dissection required is expensive.
My computer is not working, is my personal data lost?
If the drive is repaired, do it again.
After the drive is repaired, Quit Disk Utiltiy and select Reset Password from the Utilties menu.
Don't change the password if your just repairing user permissions, instead select the drive at top and the account your having issues with.
See an area labeled Reset Home Directory Permissions and ACLs. Click the button.
After that, quit and your in the OS X install screen, select the boot volume and click Install, this will overwrite OS X 10.6 with a fresh copy.
Quit and restart, then when you log in hit Apple Menu > Software Update until clear, you should be on 10.6.8
Some third party programs may not work, you will have to reinstall them from original sources and make sure they are compliant with 10.6.8

Mac will not start. HELP!!

my 17" imac early 2006 will not start it came on yesterday with a fail screen and telling me to hold the power key to restart once i did that the cd drive was going made and no screen and the power light stays on. i have tried holding down the option key cmd+PR and this does nothing. no apple start up tune just a power light and a sound like the hard drive getting ready to start. any help would be great. wanna get fixed before my pc mates give me hard time as i always rave about macs.

Hi
It sounds like you are experiencing kernel panic, if you see that grey screen with multi languages. The cause is usually hardware, possibly RAM. Have a look at this link. It may help you.
http://www.thexlab.com/faqs/kernelpanics.html
It mentions Tiger, but I think you could work with that.
I hope you can get things fixed before your mates come around.
Message was edited by: roam

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

Hi, ATPMolloy.
I certainly understand your frustration and will do my best to help. I see you have uninstalled and reinstalled iTunes with no change in results. I have attached an article below that specifically troubleshoots this issue that you are experiencing.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Regards,
Jason H.

3 year old Mac will not start up, help?

My 3year old Mac will not start up, just sits there and spins. Any suggestions on corrective steps?

Kurt412,
which version of OS X is installed on your MacBook Pro?

The Containing Folder will not open to access its content

Windows XP Professional
2GHz processor
2GB RAM
The system seems OK
Using Firefox 8.0

If Open and Open Containing Folder in the right-click context menu in the Download Manager window are grayed then that means that the file is no longer in the original download location.<br />
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.<br />
See:
* http://kb.mozillazine.org/Unable_to_save_or_download_files

The System Preferences will not open on my eMac. How do I get it to open?

I cannot get the system preferences to open on my eMac. I think it is a G4 running OS 10.4. How do I get it to work?
Not sure on this one and apple isn't much help on this.

First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

In XP Mode on Windows 7, after installing application as like I would normally on an actual XP system, application will not start in windows XP mode itself.

Just did a clean install of windows 7. I then downloaded windows XP mode and Windows Virtual Mode. Everything ran flawlessly and everything is updated. I needed to Install a program called Dentrix 10.5 which can only be installed on Windows
XP for numerous reasons and one including it needing to use Microsoft .NET 1.0. I installed this program on Windows XP Mode as I would as if I were installing it with a computer with windows XP. The Install of the program went fine and completed.
Still being in Windows XP Mode I wanted to see how it would run. I hit Start Menu, All Programs, Startup Programs, and clicked on the Dentrix Application. Once I clicked it the time glass on the mouse was there for a few seconds and
then went away without the application starting up at all. One thing that I'm thinking is why after I clicked Start Menu, All programs, is why was Dentrix not in its own folder and instead in the Startup programs after All programs? Any Ideas how
to get the program to run? Like I said, I am trying to run the program in Windows XP Mode and not Windows 7 as I have found many Q's and A's on only how to do that. Also this is the second application which I downloaded and the first being Microsoft
Security Essentials so I know I don't have some virus from keeping from opening the Dentrix Application. Incase you are wondering the Microsoft Security Essentials opens and runs fine in Windows XP Mode. So Pretty Much My Main question is: Why
my application not starting up in Windows XP Mode? Any help is greatly appreciated!

Once I clicked it the time glass on the mouse was there for a few seconds and then went away without the application starting up at all.
A couple times a week I open Dentrix 11.0 in a virtual machine on Windows 7. I experience the same thing almost every time I open the VM. I must first get Windows to "reconnect" my network for me. Do this by opening Start | My Computer, and
double-click on the mapped network drive leading to the Dentrix data. After I can see the Dentrix data drive, Dentrix will be able to read it too and will open correctly.
In Dentrix, seeing nothing (or briefly seeing a hourglass and then seeing nothing) is a classic sign that either:
- The database files are marked as Read Only
- The program cannot access the data files (probably the folder it is pointed to does not contain any data).
- Or possibly the database path does not point to the right location where the data files are located
Open the folder where you installed the program files of Dentrix (probably c:\program files\dentrix\) and double-click to run EP.EXE. The database path will be revealed. You can "Browse" to the correct location, and "OK" through the dialog to
close them. Then try opening Dentrix again.
Should that not work, open Start | My Computer, and try to open the path (starting with the drive letter, then the folder structure you saw in EP.EXE).
By the way, if your path uses UNC (starting with two back-slashes and then the computer name of the server), you'll need to map a network drive and replace your path with a mapped drive path. (Map a drive in Start | My Computer | Tools | Map Network
Drive). Dentrix really doesn't like UNC paths.
Dentrix 10.5 can only be installed on Windows XP
Microsoft .NET 1.0
Just FYI, Microsoft .Net Framework 1.0 is required only for the "Time Clock" feature of Dentrix. Windows 7 already has .NET Framework features up to version 3.5 built in, and Time Clock (in my experience) works great under Windows 7 without installing
.NET 1.0.
Have you tried installing directly in Windows 7? I have a specific reason why I don't (I have a newer version of Dentrix installed on my Win 7 machine, and use the VM to go back to an older database occasionally - so I can't mix two different program versions
on the same machine). If you were to try installing this program under Windows 7 directly, Dentrix will launch the Microsoft .NET Framework install after the Dentrix install is completed. Just cancel out at that point (Windows will probably give you an "incompatibility"
error message anyway before allowing the install to go through) and I believe you can run it under Windows 7. That might eliminate the networking-through-the-VM issue. So, if you have no other reason not to install Dentrix on your Windows 7 machine directly,
I'd try it. You might be surprised and if it works, you'd save yourself some headache with connecting the to network through the virual machine.
Is why was Dentrix not in its own folder and instead in the Startup programs after All programs?
During the installation, on the Select Program Folder screen, you must have clicked the "Startup" option under Existing Folders. By default, "Dentrix" will be typed into the box at the top. If you simply clicked Next, it would have gone
to the correct location. The screen is a little confusing, because something in the list will be highlighted by default, but what is typed into the box at the top will actually be used.

Taking Fonts out of the systems folder! Will not start up HELP!!!!

Similar Messages

Maybe you are looking for