Taking invoice from one address and paying to other address

Hi Gurus
Please guide me on this. This question is extension to the other question i asked a minute ago.
I have a vendor with a payment recipient partner(different address) on it.
Ex: Invoice comes from the main vendor 11111 and check should go to the recipient 22222.
Scenario 1: how do i enter the invoice via FB60? Should I enter the invoice for vendor 11111 because he sent it? if yes, the open item will go to 11111. And i cannot pay 22222 because there is no open item there.
Scenario 2: How would it be if 11111 gets a PO and sends back an invoice. I am asking about the MIGO MIRO situation.
Please help me.. Points guaranteed.
Thank you
Manu

Hi Manu,
In your example here the accounting data and the PO should be set up at "22222" level.
The Vendor that is sending you the invoice could be seen as a "Head office" partner function or something similar but from a legal point of view you need to make sure you have the correct bank details set up in "22222" to pay them.
I dont believe you need to record from a Finance point of view that "11111" sent you the invoice.

Similar Messages

Taking data from one column and spread it out into multiple columns

I have a table that I wish to take the multiple values out of one column and stick each into its own column..
The data looks like this:
subscriber id benefit plan
12345 Med
12345 Drg
98765 Med
98765 Drg
I want it to look like:
subscriber_id pc_med
12345
select distinct subscriber_id,
(select grp07_benefit_plan from martin_7265_anoc
where grp07_benefit_plan_type = 'MEDICAL ') pc_med,
(select grp07_benefit_plan from martin_7265_anoc
where grp07_benefit_plan_type = 'DRUG ') pc_drg
from martin_7265_anoc

user12296489 wrote:
I have a table that I wish to take the multiple values out of one column and stick each into its own column..Multiple values in a single column is a violation of relational design. Makes it very difficult to implement data integrity. And there is the inevitable complexity and performance knock when trying to extract distinct values from the single column.
Thus your attempt at fixing it is hopefully a permanent solution and not a a hack trying to make a broken db design to work?
As Daniel said, it is very hard to make any sense of the example you have posted. But this is not the first time here that a poster wants to extract multiple values from a string column - so the basic principles of how to do it, remains the same.
You need to have a means to identify each distinct value. This is usually done by identifying the separator character used between values. Such as a space or a comma.
If the values are fixed length, then you can use sub-strings with explicit positions and lengths to extract the values from the string.
The typical case is the former, which means you need to tokenise (split) the string. There are a number of ways to do this. I posted an example in {message:id=1807978} that shows how to do it via a PL/SQL function. There are numerous other ways, such as using SQL only. If you search for a keywords like "+splitting string+", it should turn up these examples.

Is it possible to copy groups/paths from one layer and paste to other multiple layers?

Note Layer > Duplicate will not work in this regard, because I want to copy one group of paths/elements from one layer to other existing layers, not to a new layer.
I have not found a command for this, nor have I found any scripts. Note I'm using CS3 but have been thinking about an upgrade.
Thanks in advance.

I actually use the Release to Layer (Sequence) function frequently to build my animated steps, for example when animating some text in a way that Premiere won't handle. This releases all the intermediary objects in a transition to new layers, but the background image still needs to be manually pasted into each newly created layer.
I have read about "Paste to all Artboards," but that feature was not included in CS3. I believe it was released in CS5. Perhaps I need to get an upgrade. Thank you for your kind replies.
I am a Mac-based CAD user going back to the mid-1990s, and it's interesting how many of the helpful, time-saving features we took for granted in those drawing programs are either not included in Illustrator products or are just being added in recent releases. I would still be using programs such as PowerDraw/PowerCADD if they hadn't gone out of business. Even with some of the expansion packs I've used, Illustrator doesn't hold a candle to PowerCADD.

Deleting mail from one app and not the other

Hi,
I'm using Outlook 2011 on my Mac Pro and Apple Mail on my laptop. Outlook has a feature where you can "Delete copies from the server (After Deleting From This Computer)".
I've looked everywhere but Mail doesn't have this feature. How can I tell Mail to do the same as Outlook?
Thanks!

You are mixing two things -- server vs second computer. I have assumed this is a POP account because the option you mention is associated with POP accounts. Were it an IMAP account, then the Inbox resides on the server and if a message is deleted, no matter from what computer, it will be gone from the Inbox and server, and you would not have needed to ask the question.
So assuming it is a POP account, there is no email client -- Outlook included -- that will delete a message that has already been downloaded onto another computer from that second computer. What can be done, consistent with your original question, is that instructions can be given to remove the message from the POP3 server upon certain actions on any computer that has downloaded the message.
Where you see the option to remove from the server after one week, there is also the option to remove from the server when moved from the Inbox. Deleting is but one action that will remove a message from the Inbox, but this option if selected will then remove the message from the server.
Is this clear now?
Ernie
Message was edited by: Ernie Stamper

How can you take a photo from one event and put it in another, without dragging to desktop and dragging back into iPhoto and moving it to the event folder I want it in.

As the title says I need help on how to take a photo from one event and put it in another, without dragging to desktop and dragging back into iPhoto and moving it to the event folder I want it in. Right now when I want to move a picture from one event to another I drag it to my desktop then delete it from iPhoto then I drag it back into iPhoto and put where I want it.An example would be taking a photo from the Christmas event and add it to a specific person event. Can I do that within the events section without all the dragging. Also is there anyway I can remove duplicates from iPhoto without going through each and every file. Any help would be greatly appreciated.

Apple doesn't make it easy to do what you want. However, here's how I do it.
Select the photo you want to move and create a new Event for it via the Event ➙ Create Event menu option.
In the Event mode select the new Event with the one picture and drag it onto the Event you want to move the photo to.

Can you edit a person from one photo and add them to another photo?

Can you edit a person out of one photo and add them to another photo? Like if you need the head shot from one photo to replace closed eyes in the other photo? Thanks.

Thank you very much! Does this require software to be purchased? I'm new to Photoshop.
From: Bill Hunt <[email protected]>
To: Kittie Gugenheim <[email protected]>
Sent: Monday, April 25, 2011 11:46 AM
Subject: Re: Can you edit a person from one photo and add them to another photo?
Welcome to the forum.
Yes, this is done often. You will need to create a Mask of that person, to separate them from the background of the original Image.
I like to do this with a Layer Mask, as it offers control, and really does not alter the Image, so you can go back and make changes.
Let's say that you have Image 01 w/ the head of your subject, and want to place it into Image 02. In Image 01, make a rough Selection. I would include a bit of extra background, as we will take care of that in a moment. With that Selection active, Copy the head shot. Go to Image 02, and Paste it. It will Paste in its own Layer. Ctrl+T (Free Transform) can be used to Scale and also position that Layer with the head. Once you have that Scaled and positioned about where you want it, create a Layer Mask. In QuickMask Mode, just paint in the additional Mask to remove all traces of the background that came in with the head shot. As you can paint OUT, and also paint IN the Mask, you can work on this, as many times as you wish - even next year.
For getting that Layer Mask looking good, work slowly, also see this http://graphicssoft.about.com/od/photoshop/l/blrbps_5agirl.htm.
I've got another tutorial, that addresses the hair area, and will post that, when I find my bookmark.
Good luck,
Hunt

Hi, I need to take my daughter off from our Apple account and set up her own. So, delete her from one account and create her own. Realize I sound imbecilic for not knowing how to do this. Any ideas? Thank you so much. Jules

Hi, I need to take my daughter off from our Apple account and set up her own. So, delete her from one account and create her own. Realize I sound imbecilic for not knowing how to do this. Any ideas? Thank you so much. Jules

You don't have to take her off your account exactly: she needs to sign out from your account on her computers and devices. Then she can obtain an Apple ID at http://appleid.apple.com and use it to sign into System Preferences or Settings>iCloud.
However, there are some issue about this. If she has been syncing her calendars and contacts to your account then the data will disappear from her devices, but remain on your account. Individual calendars can be exported as .ics files and reimported into her account, but if she has her contacts mixed up with yours she will have to enter them individually in the new account (or export yours, import them into hers, and delete the ones she doesn't want.
More intractable is the email issue. She cannot move an address from your account to hers, so if she has been using a alias on your account to have her own address she cannot transfer it. She will have to create a new email address.

What is the T Code to transfer an invoice from one customer to another ?

What is the T Code to transfer an invoice from one customer to another ?
Thanks.
Points will be awarded.

Hi Kathy,
You cannot transfer the invoices between customers. You need to reverse customer A invoice and then post that invoice to customer B.
Regards
Jyotsna

How to get the data from one table and insert into another table

Hi,
We have requirement to build OA page with the data needs to be populated from one table and on save data into another table.
For the above requirement what the best way to implement in OAF.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
Thanks

You can achieve this in many different ways, one is
1. Create another VO based on the EO which is based on the dest table.
2. At save, copy the contents of the source VO into the dest VO (see copy routine in dev guide).
3. commiting the transaction will push the data into the dest table on which the dest VO is based.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
if by table you mean a DB table, then no, you can have a VO based on multiple EOs which will do DMLs accordingly.Thanks
Tapash

I have an extensive aperture library on my computer's hard drive and I want to break it up into separate smaller libraries on external hard drives. How do I take projects from one library and add them to another one?

I have an extensive aperture library on my computer's hard drive and I want to break it up into separate smaller libraries on external hard drives. How do I take projects from one library and add them to another one?

Coastal,
Frank gave you the exact answer to your question.
However, I would like to ask if you are indeed asking the right question. Do you really want different libraries? The implications are that you have to "switch" libraries to see what's in the others, and so that your searches don't work across all of your pictures? If so, then you asked the right question. If not, you may be more interested in relocating your masters to multiple hard drives so your library gets smaller, instead of breaking up the library.
nathan

How do you take pictures from one library and put in another library??

How do you take pictures from one library and put in another library??

Options:
1. Export from iPhoto A to the Finder, then import to iPhoto B
This gets the photo over, but no versions, no edit history and not all the metadata
2. Use iPhoto Library Manager
This gets everything: versions, edit history and all the metadata.
Regards
TD

HT204053 My wife and I have an iphone each using one apple id. How do we stop items being deleted from one phone and then find it has been deleted from the other?

My wife and I have an iphone each using one apple id. How do we stop phone contacts being deleted from one phone and then find it has been deleted from the other?
Also this works when one of us downloads an app it appears on the other iphone

You need to use separate iCloud accounts. This will mean that you can both have your own separate contracts and calendars and put an end to them being deleted by each other.
Whether or not you have a separate iTunes account, is up to you. If you have a separate iTunes accounts you will not be able to access the music, books, apps that have been purchased by the other. This may be exactly what you want, but it also means that you both may end up purchasing the same item.

Is there anyway to take a downloaded app from one computer and put it on another without rebuying it. I have a macbook that I bought the new iMovie and iPhoto on, but I would rather it be on my iMac. So is there anyway I can change it?

Is there anyway to take a downloaded app from one computer and put it on another without rebuying it. I have a macbook that I bought the new iMovie and iPhoto on, but I would rather it be on my iMac. So is there anyway I can change it? I thought that if I bought it the apps on my macbook, they would be avaliable on my imac like the mobile devices operate. The macbook has 10.6.8 cause its a older model and I think lion would slow it down. Any help??

Just redownload it on the other computer by logging into the App Store with the same Apple ID you used to purchase it.

How can I delete an Apple ID from one device and replace it with a different ID on that same device?

How can I delete an Apple ID from one device and replace it with a different ID on that same device?

Tthe brute force method: start with Settings > iCloud and turn off Find My (you will need the password), then change the iCloud ID, then go to the apps such as Messages, FaceTime, etc, and delete the Apple ID and enter the new one.

Report to display (actuals data from one cube and plan from another)

Hi Gurus,
         I have a requirement in reporting to display actual data from one cube and plan data from a different one.
        The example below might give a clear picture of the requirement.
rows has key figures and columns = months
Jan | Feb | Mar | Apr | May | Jun ...   ....
GrossSales
Net Sales
Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1   and for the remaining months (Apr thru Dec) from CUBE2.
Similarly when i run the report next month(may),
then (data for Jan, Feb, Mar, Apr from CUBE1)
and ( May thru Dec from CUBE2)
Any suggestions.
Thanks in Advance
Kumar

Hi Henry,
     We alreadey have a multi provider which includes
FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
So you suggest that we have two versions of key figure for actual and plan.
ie. each KF will have two versions.
actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
eg:
Jan | Feb | Mar | Apr | May | Jun ...
GrossSales(Act)
GrossSlaes(Plan)
Net Sales(Acutal)
Net Sales(Plan)
Correct me if I am wrong.
the report has a lot of key figures, having two versions for each kf will be confusing.
the user would like to see
Jan.....| ...Feb |..Mar |..Apr.....| May |
GrossSales   Act Value|Act.V |Act.V| PlanVal|PlanVal|
Net Sales
where Act.Value is from CUBE1
         Plan Value is from CUBE2
Thanks
Kumar

Taking invoice from one address and paying to other address

Similar Messages

Maybe you are looking for