Taking much time for loading data

Dear All
While loading data in PRD system (for master data and transaction data), it's taking much time. For ex., 2LIS_05_QOITM, I am loading delta data only in PSA from R/3. Some times (yesterday) it's taking 2 mins and some times (today) it's taking 5 hrs not yet completed (it's yellow). Actually yesterday, we went to SM58 in R/3 side and executed that LUW for some other data sources. Now also we can do but we don't want to like that. Because we are expecting permanent soulution. Could u please advice me. I am getting below message in status tab
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
I am loading data through Process chain and user is BWREMOTE (authorized user).
Please help me.
Thanks a lot in advance
Raja

Dear Karthik
No I couldn't resolve till now
But Everything is fine.
Now status is yellow only (209 from 209). Now what i want to do.
Im getting below message in status tab
Missing data packages for PSA Table
Diagnosis
Data packets are missing from PSA Table . BI processing does not return any errors. The data transport from the source system to BI was probably incorrect.
Procedure
Check the tRFC overview in the source system.
You access this log using the wizard or following the menu path "Environment -> Transact. RFC -> Source System".
Error handling:
If the tRFC is incorrect, resolve the errors listed there.
Check that the source system is connected properly to BI. In particular, check the remote user authorizations in BI.
In detail tab, I am getting below message
Info IDoc 2 : sent, not arrived ; IDoc ready for dispatch (ALE service)
Thanks in advance
Raja

Similar Messages

Taking more time for loading Real Cost estimates

Dear Experts,
It is taking more time to load data into cude CO-PC: Product Cost Planning - Released Cost Estimates(0COPC_C09).The update mode is "Full Update"There are only 105607 records.For other areas there are more than this records,but it gets loaded easily.
I have problem only to this 0COPC_C09.Could anybody can guide me?.
Rgds
ACE

suresh.ratnaji wrote:
NAME                                 TYPE        VALUE
_optimizer_cost_based_transformation string      OFF
filesystemio_options                 string      asynch
object_cache_optimal_size            integer     102400
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      10.2.0.4
optimizer_index_caching              integer     0
optimizer_index_cost_adj             integer     100
optimizer_mode                       string      choose
optimizer_secure_view_merging        boolean     TRUE
plsql_optimize_level                 integer     2
please let me know why it taking more time in INDEX RANGE SCAN compare to the full table scan?Suresh,
Any particular reason why you have a non-default value for a hidden parameter, optimizercost_based_transformation ?
On my 10.2.0.1 database, its default value is "linear". What happens when you reset the value of the hidden parameter to default?

Self Service Password Registration Page taking more time for loading in FIM 2010 R2

Hi,
I have beeen successfullly installed FIM 2010 R2 SSPR and it is working fine
but my problem is that Self Service Password Registration Page taking more time for loading when i provide Window Credential,it is taking approximate 50 to 60 Seconds for loading a page in FIM 2010 R2
very urgent requirement.
Regards
Anil Kumar

Double check that the objectSid, accountname and domain is populated for the users in the FIM portal, and each user is connected to their AD counterparts
Check here for more info:
http://social.technet.microsoft.com/wiki/contents/articles/20213.troubleshooting-fim-sspr-error-3003-the-current-user-account-is-not-recognized-by-forefront-identity-manager-please-contact-your-help-desk-or-system-administrator.aspx

0CSM_USER_TEXT taking much time to load

Its related to 0CSM_USER_TEXT which isn’t a Retail Datasource/Object so I’m to assume it’s a FI&Gen Job. The job currently produces 200,000 records over an 8 hour period. Firstly it used to finish in 8 sec for some number of records those were Not more than 10,000.
Please tell me solution why the loading is taking so much of time. Because of this whole Process Chain is taking time to load.

Hi,
Assuming as its taking more time while loading to psa.
if yes then please check your job log at source side.
Go to your info pack monitor--> menu environment--> job overview--> job in the source system--> it will prompts for source user id and password. enter them and you will egt your job.select job and lick on log details icon from tool bar. there you can see your job in detailed steps.
Thanks

Process Chain taking long time in loading data in infocube

Dear Expert,
We are loading data thru PC in AR cube it takes data frm
PSA-> DSO->Activation->Index Deletion->DTP(load infocube)->IndexCreation->Create Aggregates.
In Index creation everyday its taking long time around 9 to 10 hrs to create it
when we go in RSRV and repair the infocube thr loading of data happens fast. We are doing it(RSRV) everyday. In DB02 we have seen dat 96% tablespace is used.
Please tell permanent solution.
Please suggest its BI Issue or Basis.
Regards,
Ankit

Hi ,
We are loading data thru PC in AR cube it takes data frm
PSA-> DSO->Activation->Index Deletion->DTP(load infocube)->IndexCreation->Create Aggregates.
In the above steps insted of Create Aggregates it should be Roll up Process of aggregates.
You can ask the basis team to check the Table space in the transaction db02old/db02.
Check if there is long running job in SM66/SM50 kill that job.
check there should be enough Batch process to perform the steps.
Hope this helps.
"Assigning points is the ways to say thanks on SDN".
Br
Alok

Taking more time for retreving data from nested table

Hi
we have two databases db1 and db2,in database db2 we have number of nested tables were there.
Now the problem is we had link between two databases,whenever u firing the any query in db1 internally it's going to acces nested tables in db2.
For feching records it's going to take much more time even records are less in table . what would be the reason.
plz help me daliy we are facing the problem regarding the same

Please avoid duplicate thread :
quaries taking more time
Nicolas.
+< mod. action : thread locked>+

Taking too long for Loaded data visible in Reporting

Hi experts,
I have a cost center cube, which takes very very long to show the " Loaded data is not yet visible in Reporting " icon for the request. I donot have aggregate on the cube and no other requests are Red /yellow. What is the reason for this weird nature. I checked the consistency check, there are no over lap /errors for the request.
Any help is appreciated.
thanks in adavnce
D Bret

Hi Dave,
Try to run the RSRV for the Cube and try to refresh the data in the cube.
RSRV --> Combined test --> transaction data --> Status of data in the info cube.
If you find any errors after running this check,repair it and then refresh the cube's data.
Hope this helps.
Thanks & Regards,
Suchitra.V

Oracle Text Index taking Much time for retreiving records

Hi,
I an using the context based index on the table with the xmltype column and using the mentioned preferences, fuzzy, stemming and substring.
I m also using the INPATH and the HASPATH operators to search on the XML contents.
The total no of records in the table is 1,14,24,340.
When i execute the query on the table it is taking atleast 20 secs to return the results.
Could anyone suggest some method to improve the performance ?

Hi,
Please find belwo the details,
Table Structure - sample_t(id NUMBER, type VARCHAR2(10),smpl_xml XMLTYPE)
Preference:
begin
ctx_ddl.create_preference('SAMPLE_PREF', 'BASIC_WORDLIST');
ctx_ddl.set_attribute('SAMPLE_PREF','FUZZY_MATCH','ENGLISH');
ctx_ddl.set_attribute('SAMPLE_PREF','FUZZY_SCORE','0');
ctx_ddl.set_attribute('SAMPLE_PREF','FUZZY_NUMRESULTS','200');
ctx_ddl.set_attribute('SAMPLE_PREF','SUBSTRING_INDEX','TRUE');
end;
Index Creation:
CREATE INDEX sample_dmn_idx ON sample_t(smpl_xml)
INDEXTYPE IS CTXSYS.CONTEXT FILTER BY type PARAMETERS
('LEXER basic_lexer_pref
WORDLIST SAMPLE_PREF
SECTION GROUP CTXSYS.PATH_SECTION_GROUP');
Query :
select ts.id from sample_t ts
WHERE CONTAINS (ts.smpl_xml, 'HASPATH(/ROOT/VAL/chars/_7= "POWDERED FRUIT DRINKS")
AND HASPATH(/ROOT/VAL/chars/_46= "POUCH")
AND HASPATH(/ROOT/VAL/chars/_62= "LEMONADE")
AND HASPATH(/ROOT/VAL/chars/_88= "PIED")
AND HASPATH(/ROOT/VAL/chars/_732= "SWEET")
AND HASPATH(/ROOT/VAL/chars/_2971= "ALL FAMILY")
AND HASPATH(/ROOT/VAL/chars/_3115= "UNKNOWN")
AND HASPATH(/ROOT/VAL/chars/_3182= "YES")
AND HASPATH(/ROOT/VAL/chars/_3340= "OTHER")',1) > 0
AND ts.type = 'ITEM'
Query Data:_
ID TYPE smpl_xml
1 ITEM <ROOT> <CODE>927</CODE> <VAL> <chars> <_7>AFTER SHAVE LOTIONS..</_7> <_27>OLD SPICE..</_27> <_46>REMAINING..</_46> <_4006>OLD SPICE..</_4006> </chars> </VAL> </ROOT>
Plan hash value: 1588539682
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 562K| 52M| 308K (1)| 01:01:43 |
|* 1 | TABLE ACCESS BY INDEX ROWID| sample_t | 562K| 52M| 308K (1)| 01:01:43 |
|* 2 | DOMAIN INDEX | sample_dmn_idx | | | 222K (0)| 00:44:34 |
Predicate Information (identified by operation id):
1 - filter("TS"."ENTY_TYP_MNM"='ITEM')
2 - access("CTXSYS"."CONTAINS"(SYS_MAKEXML(0,"SYS_NC00004$"),'HASPATH(/ROOT/VAL/chars/_7= "POWDERED FRUIT DRINKS") AND
HASPATH(/ROOT/VAL/chars/_46= "POUCH") AND
HASPATH(/ROOT/VAL/chars/_62= "LEMONADE") AND
HASPATH(/ROOT/VAL/chars/_88= "PIED") AND
HASPATH(/ROOT/VAL/chars/_732= "SWEET") AND
HASPATH(/ROOT/VAL/chars/_2971= "ALL FAMILY") AND
HASPATH(/ROOT/VAL/chars/_3115= "UNKNOWN") AND
HASPATH(/ROOT/VAL/chars/_3182= "YES") AND
HASPATH(/ROOT/VAL/chars/_3340= "OTHER")',1)>0)
Edited by: user13780543 on Aug 17, 2011 2:12 AM
Edited by: user13780543 on Aug 17, 2011 2:13 AM
Edited by: user13780543 on Aug 17, 2011 2:14 AM

Full DTP taking too much time to load

Hi All ,
I am facing an issue where a DTP is taking too much time to load data from DSO to Cube via PC and also while manually running it.
There are 6 such similar DTP's which load data for different countries(different DSO's and Cubes as source and target respectively) for last 7 days based on GI Date. All the DTP's are pulling almost same no. of records and finish within 25-30 min. But only one DTP takes around 3 hours. The problem started couple of days back.
I have change the Parallel processes from 3->4->5 and packet size from 50,000->10,000->1.00.000 but no improvement. Also want to mention that all the source DSO's and target Cubes have the same structure. All the transformations have Field Routines and End Routines.
Can you all please share some pointers which can help.
Thanks
Prateek

HI Raman ,
This is what I get when I check the report. Can this be causing issues as 2 rows have % >= 100
ETVC0006           /BIC/DETVC00069     rows:      1.484    ratio:          0 %
ETVC0006           /BIC/DETVC0006C     rows: 15.059.600    ratio:        103 %
ETVC0006           /BIC/DETVC0006D     rows:        242    ratio:          0 %
ETVC0006           /BIC/DETVC0006P     rows:         66    ratio:          0 %
ETVC0006           /BIC/DETVC0006T     rows:        156    ratio:          0 %
ETVC0006           /BIC/DETVC0006U     rows:          2    ratio:          0 %
ETVC0006           /BIC/EETVC0006      rows: 14.680.700    ratio:        100 %
ETVC0006           /BIC/FETVC0006      rows:          0    ratio:          0 %
ETVC0007           rows: 13.939.200    density:              0,0 %

Taking much time when trying to Drill a characterstic in the BW Report.

Hi All,
When we are executing the BW report, it is taking nearly 1 to 2 mins then when we are trying to drill down a characterstic it is taking much time nearly 30 mins to 1 hour and througing an error message that,
"An error has occared during loading. Plese look in the upper frame for further information."
I have executed this query in RSRT and cheked the query properties,
this quey is bringing the data directly form Aggregates but some chares are not avalable in the Agrregtes.
So... after execution when we are trying to drill down the chars is taking much time for chars which are not avilable in the Aggregates. For other chars which are avilable in the Aggregates it is taking only 2 to 3 mins only.
How to do the drill down for the chars which are not avilable in the Aggregates with out taking much time and error.
Could you kindly give any solution for this.
Thanks & Regards,
Raju. E

Hi,
The only solution is to include all the char used in the report in the aggregates or this will the issue you will face.
just create a proposal for aggregates before creating any new aggregates as it will give you the idea which one is most used.
Also you should make sure that all the navigation characteristics are part of the aggregates.
Thanks
Ajeet

Take long time for loading

Hi Experts,
One of my data target (Data comming from another ODS) is taking long time for loading, basically it takes below 10 times only, but today it is running from last 40 minesu2026
In Status Tab it showing....
Job termination in source system
Diagnosis
The background job for data selection in the source system has been terminated. It is very likely that a short dump has been logged in the source system
Procedure
Read the job log in the source system. Additional information is displayed here.
To access the job log, use the monitor wizard (step-by-step analysis) or the menu path <LS>Environment -> Job Overview -> In Source System
Error correction:
Follow the instructions in the job log messages.
Can anyone please solve my problem.
Thanks in advance
David

Hi Experts,
Thanks for your answers, and my load failed when the data comes from one ODS to another ODS. find the below job log
Job started
Step 001 started (program SBIE0001, variant &0000000007169, user ID RCREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 8ZPP_OP3
 Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 20006838008 *
abap/heap_area_total.......... 20006838008 *
abap/heaplimit................ 83886080 *
zcsa/installed_languages...... ED *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 5000000 *
ztta/roll_extension........... 4294967295 *
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:31:55, End = 06.09.2010 01:31:55
Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 2 in task 0004 (2 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:00, End = 06.09.2010 01:32:00
Asynchronous transmission of info IDoc 4 in task 0005 (2 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 3 in task 0006 (3 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:04, End = 06.09.2010 01:32:04
Asynchronous transmission of info IDoc 5 in task 0007 (3 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 4 in task 0008 (4 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:08, End = 06.09.2010 01:32:08
Asynchronous transmission of info IDoc 6 in task 0009 (4 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 5 in task 0010 (5 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:11, End = 06.09.2010 01:32:11
Asynchronous transmission of info IDoc 7 in task 0011 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Asynchronous send of data package 13 in task 0026 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:01, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:44, End = 06.09.2010 01:32:45
tRFC: Data Package = 8, TID = 0AEB465C00AE4C847CEA0070, Duration = 00:00:17,
tRFC: Start = 06.09.2010 01:32:29, End = 06.09.2010 01:32:46
Asynchronous transmission of info IDoc 15 in task 0027 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 14 in task 0028 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:48, End = 06.09.2010 01:32:48
tRFC: Data Package = 9, TID = 0AEB465C00AE4C847CEF0071, Duration = 00:00:18,
tRFC: Start = 06.09.2010 01:32:33, End = 06.09.2010 01:32:51
Asynchronous transmission of info IDoc 16 in task 0029 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 15 in task 0030 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:52, End = 06.09.2010 01:32:52
Asynchronous transmission of info IDoc 17 in task 0031 (6 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 16 in task 0032 (7 parallel tasks)
tRFC: Data Package = 10, TID = 0AEB465C00684C847CF30070, Duration = 00:00:18,
tRFC: Start = 06.09.2010 01:32:37, End = 06.09.2010 01:32:55
tRFC: Data Package = 11, TID = 0AEB465C02E14C847CF70083, Duration = 00:00:17,
tRFC: Start = 06.09.2010 01:32:42, End = 06.09.2010 01:32:59
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:32:56, End = 06.09.2010 01:32:56
Asynchronous transmission of info IDoc 18 in task 0033 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 17 in task 0034 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:33:00, End = 06.09.2010 01:33:00
tRFC: Data Package = 12, TID = 0AEB465C00AE4C847CFB0072, Duration = 00:00:16,
tRFC: Start = 06.09.2010 01:32:46, End = 06.09.2010 01:33:02
Asynchronous transmission of info IDoc 19 in task 0035 (5 parallel tasks)
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 100,000 records
Result of customer enhancement: 100,000 records
Asynchronous send of data package 18 in task 0036 (6 parallel tasks)
tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =
tRFC: Start = 06.09.2010 01:33:04, End = 06.09.2010 01:33:04
Asynchronous transmission of info IDoc 20 in task 0037 (6 parallel tasks)
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
Thanks
Daivd
Edited by: david Rathod on Sep 6, 2010 12:04 PM

Long time to load data from PSA to DSO -Sequential read RSBKDATA_V

Hi ,
It is taking long time to load data from PSA to DSO. It is doing Sequential read on RSBKDATA_V and table contents no data .
we are at - SAPKW70105. It started since yesterday . There is no changes in system parameters.
Please advice.
Thanks
Nilesh

Hi Nilesh,
I guess the following SAP Note will help you in this situation.
[1476842 - Performance: read RSBKDATA only when needed|https://websmp107.sap-ag.de/sap/support/notes/1476842]
Just note that the reference to Support Packages is wrong. It is also included in SAP_BW 701 06.

OBIEE 10g taking long time for login

Hello Experts,
I am using Oracle BI applications 7.9.6.2 with OBIEE 10.1.3.4.2.
When any user tries to login it is taking much time for the process(50-60 sec) but after login other query responce is good.
Can you suggest me how can i reduce this login interval ?
Thank You

Pls. disable unwanted VARIABLES in repository & check for any Init block initialization taking more time.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

stop the download if it's stalled, and restart your download.

Taking too much time to load application

Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...

Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/

Taking much time for loading data

Similar Messages

Maybe you are looking for