Taking off the screen protector

I just got some new tubes for my nano for xmas, and as you know they don't come with a screen protector. I managed to find one that came with my old case (ironically, that one didn't even need a screen protector. Go figure) So, I put it on my nano, and guess what. I did it wrong. It has air bubbles & you can see a finger print that's on the other sticky side. So, I tried to get it off to fix it, but it's not coming off!! I don't want to start clawing at it for fear of more scratches. Is there a trick to removing screen protectors?
Also, once it's removed I probably won't be able to reuse it, so does anyone know where I can get a screen protector by itself? I tried doing a search for them, but the only types of things I've seen are the full body wraps, and that's not what I want.
Thanks!

Sadly, I have yet to use oen for the nano. I've used them on other products such as my Nintendo DS, my sony PSP, and my smart phone.
I hear www.theinvisibleshield.com is a good source, but they may be very aggrivating to apply.
If they are like any other static screen protector, they WILL be very frustrating to apply
Good luck!

Similar Messages

  • Having trouble taking off a screen protector

    I have an iphone 4 have the protective screen on that I bought with phone, want to change having trouble getting it off?  Any tricks to it?

    Sadly, I have yet to use oen for the nano. I've used them on other products such as my Nintendo DS, my sony PSP, and my smart phone.
    I hear www.theinvisibleshield.com is a good source, but they may be very aggrivating to apply.
    If they are like any other static screen protector, they WILL be very frustrating to apply
    Good luck!

  • My I pod screen is frozen. I've cleaned it multiple times, and have even taken the screen protector off. Yet it still won't sense my touch. Can anyone help!

    My I pod screen is frozen. I've cleaned it multiple times, and have even taken the screen protector off. Yet it still won't sense my touch. Can anyone help!

    Before taking it in to the Apple Store... Try this...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • I took off my screen protector, and it left bubbles in the actual screen! How do I get rid of them?

    I put on the screen protector and noticed it had some bubbles so I peeled it back to fix it. Well, what I though was an air bubbles in the protector, was a bubble in the screen!! This WAS NOT there before. How do I get rid of the bubble that is in the iphone?
    Thanks!

    zinkiew,
    Why don't you go to the "Screen Protector Mfg" web site and see what they say about removing the residue mark. Most all S. P. sites have a section on how to clean the screen when you take the protector off.
    That said have you tried a damp soft cloth?
    You can also try a piece of "Scotch Tape"... press the sticky side of the tape on the bubble mark and then lift it off. You may have to do it several times to get it all.
    Their may be some solvents like alcohol that will remove the mark if it is glue residue from the protector. But make sure you check with Apple before you use any solvents. Some solvents may attack the Oleophobic coating on the iPhone screen.
    You can also Google for a solution to your problem. I have seen several "How to" articles to deal with the issue you are having.
    Just so you don't do something to make things worse I will repeat my caveat - Check with Apple before you use anything but a damp soft cloth.

  • I am new to iphones and went to Itunes and it said my new iphone needed a software update. Now the apps that I put on wont work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.

    I have a new iphone and went into Itunes and it said my new iphone needed a software update. I let it do this and now the apps that I put on won't work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.

    Memory Map:  http://www.memory-map.co.uk/iphone/
    0870:  http://www.simonmaddox.com/
    Viber:  http://support.viber.com/home
    VoucherCloud: http://questions.vouchercloud.com/

  • Downloaded iOS 7.0.2 and one of my apps (ultimate history quiz) changed size. It is so large I am not able to play the game because most of the print is off the screen on my iPad. Help!!!!

    Had an app (Ultimate History Quiz) that I played frequently. It came up on the screen in the smaller iPhone version. Then I downloaded iOS 7.0.2, and now the app is so big that the printing goes off the screen, making it impossible to play. I checked the app sore to buy another one, and it is no longer available on there.  WHAT CAN I DO TO RESTORE THE GAME TO ITS ORIGINAL SIZE???????

    Wait for apple to tweak things....or talk to the app developer. they haven't updated since the update and unless APple happens to fix whatever the issue is, then the burden is on history to make their app work with the iOS

  • Presentation starts 5" from the left side of screen and pushes intellegence off the screen to the right.

    The top of my screen is normal: the tool bar starts "File, Edit...
    The body of the screen while running Firefox-and during typing of this message- is full of lite. The actual data: starting from the top of this page- "Firefox Help... Ask a new..." etc. starts 5 1/4 inches from the left of the page.
    It's as if Firefox were presenting a wider page with the presentation moved to the right. This pushes the last, normal, 5" of the presentation off the screen.
    The rite end of the bar which starts out: http://www.mozilla.com/en-US/firefox/fx/
    is off the page, so the facilities at the rite end are lost.
    Any presentation, including Amazon.com and Youtube.com are similarly pushed off the rite side of the screen by 5".
    I have no access to the rite-most 5" of any internet presentation.
    The sliders that move the presentation up and down and left/ rite are off the screen.
    I have shrunk the display down so small, i can barely see the numbers: Control panel\ display \ settings \ 1920 by 1200. This gives the ILLUSION of centering the presentation, but still no sliders. At this setting, i can see the full width of Amazon. Youtube appears centered, with 4 1/4" on both left and rite, but no edge sliders.
    I dropped the 'setting' to 1440 x 900.
    Lost about 3" off the rite side of Amazon; barely on the rite edge of Youtube.
    None of my local programming has a problem: Excel, pictures, videos, Word, even Internet Explorer goes full page and centered.
    I un-installed Firefox and downloaded it fresh. It did NOT ask me to reboot my puter, so i didn't .
    I can supply pictures (screen shots) of the phenomenon on request.

    - Open Firefox -> got to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. You can enable the Add-ons later. Check if its working.

  • [FIXED BUT NOT SOLVED] NVIDIA - Desktop shifted left off the screen...

    Hello Community!
    For a pretty long time right now, I am trying to fix the video setup of my HTPC but without success. Because I'am run out of ideas, I really need Your help.
    PROBLEM:
    The desktop is shifted left off the screen, round about 100 Pixel.
    It started some time in the past, while upgrading a one year old Ubuntu installation (NVDIA drivers). Because I couldn't fix it and also wanted to replace Ubuntu with ArchLinux, I performed a clean ArchLinux installation.
    First I used the nouveau drivers ending up with the same problem. I read an configured using xrandr and cvt, but with no success. 
    So I restored the system to a snapshot taken before X11 and nouveau drivers installations, thank's BTRFS, and installed the proprietary NVIDIA drivers ending up with the same problems. Again I tried all the tips and tricks found in the documentations and forums, used nvidia-xconfig, hand crafted the xorg.conf all with no success.
    HARDWARE
    The system is a MSI Media Live (http://www.msi.com/product/desktop/Media-Live.html)
    . Support AMDR Athlon 64 X2, Athlon 64 and Sempron in the Socket AM2 package
    . North Bridge: nVidia® C51PVG Chipset
    . South Bridge: nVidia® MCP51 Chipset
    . Graphics is Integrated NVIDIA GPU GeForce 6150 LE
    . VGA, SCART and HDMI - Connectors
    The display Problem is on VGA and HDMI now, where in the past the VGA was perfect. Therefor I connected and used the VGA port only, in all tests.
    INSTALLATION HISTORY
    2012-12-30 + Installation according ArchLinux install guide
    2012-12-31 + pacman -S openssh
    systemctl start sshd
    2012-12-31 + pacman -S btrfs-progs
    2012-12-31 pacman -S sudo
    2012-12-31 + sudo pacman -S bash-completion
    2013-01-03 + pacman -S rsync wget gptfdisk
    2013-01-10 + pacman -Suy nvidia-304xx
    2013-01-10 + pacman -Syu nvidia-304xx-utils
    2013-01-10 + pacman -S xorg-server xorg-xinit xorg-server-utils
    2013-01-10 + pacman -S mesa
    2013-01-10 + pacman -S xorg-twm xorg-xclock xterm
    2013-01-10 + pacman -S ttf-dejavu
    2013-01-10 + pacman -Suy lxdm
    2013-01-10 + systemctl enable lxdm.service
    2013-01-10 + pacman -S xorg-xdpyinfo
    2013-01-10 + pacman -S pkgtools
    2013-01-10 + pacman -S pkgfile
    2013-01-10 + pacman -S bc
    As You can see, I installed only a minimal X11 environment for test. The lxdm display manger shows up but with very small font and shifted to the left. Only if I force a resolution of 1024x768 the image is centered on screen/tv but still the very small font. Obviously not a solution for a HTPC.
    Here are the xorg.conf and the Xorg.0.log of my last test configuration.
    xorg.xonf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 304.64 (buildmeister@swio-display-x86-rhel47-12) Tue Oct 30 12:04:46 PDT 2012
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 100 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    In the Section "ServerLayout" I modified the line
         Screen      0  "Screen0" 100 0
    by adding the 100 0 at the end.
    Xorg.0.log
    [ 12.997]
    X.Org X Server 1.13.1
    Release Date: 2012-12-13
    [ 12.997] X Protocol Version 11, Revision 0
    [ 12.997] Build Operating System: Linux 3.7.0-1-ARCH x86_64
    [ 12.997] Current Operating System: Linux media-pc 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64
    [ 12.997] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0f1f870d-ccaa-4bc2-b149-1792f0c69fce
    [ 12.997] Build Date: 16 December 2012 04:45:14PM
    [ 12.997]
    [ 12.997] Current version of pixman: 0.28.2
    [ 12.997] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 12.997] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 12.998] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 18 13:18:12 2013
    [ 13.065] (==) Using config file: "/etc/X11/xorg.conf"
    [ 13.065] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 13.066] (==) ServerLayout "Layout0"
    [ 13.066] (**) |-->Screen "Screen0" (0)
    [ 13.066] (**) | |-->Monitor "Monitor0"
    [ 13.066] (**) | |-->Device "Device0"
    [ 13.066] (**) |-->Input Device "Keyboard0"
    [ 13.066] (**) |-->Input Device "Mouse0"
    [ 13.066] (==) Automatically adding devices
    [ 13.066] (==) Automatically enabling devices
    [ 13.066] (==) Automatically adding GPU devices
    [ 13.213] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 13.213] Entry deleted from font path.
    [ 13.213] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 13.213] Entry deleted from font path.
    [ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 13.222] Entry deleted from font path.
    [ 13.222] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 13.223] Entry deleted from font path.
    [ 13.223] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 13.223] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 13.223] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 13.223] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 13.223] (WW) Disabling Keyboard0
    [ 13.223] (WW) Disabling Mouse0
    [ 13.223] (II) Loader magic: 0x7fcc40
    [ 13.223] (II) Module ABI versions:
    [ 13.223] X.Org ANSI C Emulation: 0.4
    [ 13.223] X.Org Video Driver: 13.1
    [ 13.223] X.Org XInput driver : 18.0
    [ 13.223] X.Org Server Extension : 7.0
    [ 13.226] (--) PCI:*(0:0:5:0) 10de:0241:1462:3290 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
    [ 13.226] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 13.226] Initializing built-in extension Generic Event Extension
    [ 13.226] Initializing built-in extension SHAPE
    [ 13.226] Initializing built-in extension MIT-SHM
    [ 13.226] Initializing built-in extension XInputExtension
    [ 13.227] Initializing built-in extension XTEST
    [ 13.227] Initializing built-in extension BIG-REQUESTS
    [ 13.227] Initializing built-in extension SYNC
    [ 13.227] Initializing built-in extension XKEYBOARD
    [ 13.227] Initializing built-in extension XC-MISC
    [ 13.227] Initializing built-in extension SECURITY
    [ 13.227] Initializing built-in extension XINERAMA
    [ 13.227] Initializing built-in extension XFIXES
    [ 13.227] Initializing built-in extension RENDER
    [ 13.227] Initializing built-in extension RANDR
    [ 13.227] Initializing built-in extension COMPOSITE
    [ 13.227] Initializing built-in extension DAMAGE
    [ 13.227] Initializing built-in extension MIT-SCREEN-SAVER
    [ 13.227] Initializing built-in extension DOUBLE-BUFFER
    [ 13.227] Initializing built-in extension RECORD
    [ 13.227] Initializing built-in extension DPMS
    [ 13.227] Initializing built-in extension X-Resource
    [ 13.227] Initializing built-in extension XVideo
    [ 13.227] Initializing built-in extension XVideo-MotionCompensation
    [ 13.227] Initializing built-in extension XFree86-VidModeExtension
    [ 13.227] Initializing built-in extension XFree86-DGA
    [ 13.227] Initializing built-in extension XFree86-DRI
    [ 13.227] Initializing built-in extension DRI2
    [ 13.227] (II) LoadModule: "glx"
    [ 13.414] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 15.559] (II) Module glx: vendor="NVIDIA Corporation"
    [ 15.559] compiled for 4.0.2, module version = 1.0.0
    [ 15.559] Module class: X.Org Server Extension
    [ 15.559] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:18:32 PDT 2012
    [ 15.560] Loading extension GLX
    [ 15.560] (II) LoadModule: "nvidia"
    [ 15.560] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 15.868] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 15.868] compiled for 4.0.2, module version = 1.0.0
    [ 15.868] Module class: X.Org Video Driver
    [ 15.868] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 10:59:51 PDT 2012
    [ 15.868] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 15.868] (++) using VT number 7
    [ 15.875] (II) Loading sub module "fb"
    [ 15.875] (II) LoadModule: "fb"
    [ 15.984] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.008] (II) Module fb: vendor="X.Org Foundation"
    [ 16.008] compiled for 1.13.1, module version = 1.0.0
    [ 16.008] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.008] (II) Loading sub module "wfb"
    [ 16.008] (II) LoadModule: "wfb"
    [ 16.008] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.025] (II) Module wfb: vendor="X.Org Foundation"
    [ 16.025] compiled for 1.13.1, module version = 1.0.0
    [ 16.025] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.025] (II) Loading sub module "ramdac"
    [ 16.025] (II) LoadModule: "ramdac"
    [ 16.025] (II) Module "ramdac" already built-in
    [ 16.025] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 16.025] (==) NVIDIA(0): RGB weight 888
    [ 16.025] (==) NVIDIA(0): Default visual is TrueColor
    [ 16.025] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 16.026] (**) NVIDIA(0): Enabling 2D acceleration
    [ 19.582] (II) NVIDIA(GPU-0): Display (Acer AT3220 (CRT-0)) does not support NVIDIA 3D
    [ 19.582] (II) NVIDIA(GPU-0): Vision stereo.
    [ 19.584] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 LE (C51) at PCI:0:5:0 (GPU-0)
    [ 19.584] (--) NVIDIA(0): Memory: 262144 kBytes
    [ 19.584] (--) NVIDIA(0): VideoBIOS: 05.51.28.56.19
    [ 19.584] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 19.584] (--) NVIDIA(0): Valid display device(s) on GeForce 6150 LE at PCI:0:5:0
    [ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0) (connected)
    [ 19.584] (--) NVIDIA(0): TV-0
    [ 19.584] (--) NVIDIA(0): DFP-0
    [ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0): 350.0 MHz maximum pixel clock
    [ 19.585] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
    [ 19.585] (--) NVIDIA(0): TV encoder: (null)
    [ 19.585] (--) NVIDIA(0): DFP-0: 310.0 MHz maximum pixel clock
    [ 19.585] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
    [ 19.585] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 19.585] (**) NVIDIA(0): device Acer AT3220 (CRT-0) (Using EDID frequencies has
    [ 19.585] (**) NVIDIA(0): been enabled on all display devices.)
    [ 19.585] (==) NVIDIA(0):
    [ 19.585] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 19.585] (==) NVIDIA(0): will be used as the requested mode.
    [ 19.585] (==) NVIDIA(0):
    [ 19.585] (II) NVIDIA(0): Validated MetaModes:
    [ 19.585] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
    [ 19.585] (II) NVIDIA(0): Virtual screen size determined to be 1360 x 768
    [ 19.587] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
    [ 19.588] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
    [ 19.589] (--) NVIDIA(0): DPI set to (49, 48); computed from "UseEdidDpi" X config
    [ 19.589] (--) NVIDIA(0): option
    [ 19.589] (--) Depth 24 pixmap format is 32 bpp
    [ 19.599] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 19.599] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 19.599] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 19.599] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 19.599] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 19.599] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 19.599] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 19.599] (II) NVIDIA(0): Config Options in the README.
    [ 19.599] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
    [ 19.754] Loading extension NV-GLX
    [ 19.797] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 19.797] (==) NVIDIA(0): Backing store disabled
    [ 19.797] (==) NVIDIA(0): Silken mouse enabled
    [ 19.798] (**) NVIDIA(0): DPMS enabled
    [ 19.798] Loading extension NV-CONTROL
    [ 19.799] Loading extension XINERAMA
    [ 19.799] (II) Loading sub module "dri2"
    [ 19.799] (II) LoadModule: "dri2"
    [ 19.799] (II) Module "dri2" already built-in
    [ 19.799] (II) NVIDIA(0): [DRI2] Setup complete
    [ 19.799] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 19.799] (--) RandR disabled
    [ 19.817] (II) Initializing extension GLX
    [ 20.522] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    only removed the input detection stuff
    Question
    How can I shift the display to the right?
    Many thanks for any hints.
    rale
    Last edited by rale (2013-01-19 11:46:14)

    Mr.Elendig wrote:Switch to dvi/hdmi if you can. Else you have to play with screen calibration etc.
    Thank You Mr.Elendig!
    The simplest answer often is best. After I connected a TFT display, instead of my TV, I was able to calibrate the screen output and got the desktop shifted. Knowing that, I tried the settings of my TV again. There is a hard to find option for calibration wich is set to automatic but doesn't do it. Trying to turn it of did the trick. Even the option stays on automatic and even the display format is fixed to 4:3 instead of 16:9, finaly the TV adjusted the display correctly.
    None the less, the problem not to be able to shift the desktop using the screen paramters in xorg.conf remains.
    Thanks
    rale

  • How do I recover a window that has gone off the screen ?

    The upper and right hand sides of my "Adobe Elements Organizer" application window have gone permanently  off my Imac screen and try as I might, I can't drag or minimize this window to centre it on my desktop as a much smaller size and thereby recover control of it.    The missing window top contains some commands I can't access and so does the missing right hand side of the application window.  Have tried junking app prefs, turning off Spaces, starting and restarting the computer.   Problem does not occur in other accounts using the same app - so something is screwed up with this app's window size defaults or settings or prefs in my user account only.
    anyone have any suggestions?   
    Deleting all the "com.adobe.elements organizer.plist" files does NOT cure my problem.   I suspect it has something to do with Mavericks' poorly tested 'multiple displays' feature  --  that likely has some bugs in it.   This app window seems to think it's on a much bigger monitor than my 21.5" Imac.'   short of removing and reinstalling the app itself or getting a windows machine, I can think of nothing else to do.

    Not sure I follow what you mean:  When I open Mission Control, the entire troubled application window is then (hurrah !!!) visible on the Mission Control "Overview" screen - but when I c\olick in that app and I am returned to the normal operating screen, it's all cut off again.  It will not let me click and hold and then drag on its lower black border; I can only resize it in the direction that pushes it further off the screen. 
    This app's main window remains stubbornly frozen in position - up at, and extending right off of,  the top right of my screen and it does not respond to normal dragging - normal attempts to pull it down and see the lower right corner so I can resize the window by dragging its corner inward diagonally.
    Can you describe what you want me to try in different words.  By invoking I assume you mean opening mission control.   That I am doing and that's the only way I can see the whole window looming quite normal.   But it won;t render for me that normal way on a normal operating screen.

  • MacBook Pro Display (window) shifts off the screen when I move my mouse

    With a slight move with my magic mouse, my entire open window will shift completely off the screen with only a part of the window still visible. I have to click on the exposed edge of the window for it to shift back into place. It's only the window of the program that I have open that moves. The dock and the desktop image stays in place. I'm using an HP external monitor now but it was doing this before I hooked up the monitor. I've tried maximizing and minimizing my window but that does not seem to have an effect. Could it be the magic mouse? Thanks in advance for any help.

    Wow. The power of Google is truly amazing. Just a little while ago, my husband was going nuts with our computer. I googled the words 'when I move my mouse to the left, the screen moves to the right'. And, Eureka! What do you think was the first thing that popped up on Google?
    Well, the answer to my question, of course!:P Which led me right to here. It may not have been me that asked the question, but this did answer MY question!
    Apparently this applies to Leopard too. Thanks alot!
    Message was edited by: Linda Schodowsky

  • When I attempt to bring up firefox, It will pop up yet slide off the screen. In which, I can't get on firefox now. What could the issue be?

    I will click on the browser to bring it up. Yet, whenever I do. It will seam to be appearing but also slide off the screen to make it un-visable. Firefox appears to work just fine except for I can't actually get on. I uninstalled the program and then re-installed it. But the issue persists.

    This issue can be caused by the Babylon Toolbar 1.1.8 extension
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

    Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

    1. Triple-click the line below to select it:
    ~/.Trash
    2. Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu. An Info dialog should open.
    3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
    4. In the General section, uncheck the box marked Locked if it's checked.
    5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
    6. Close the Info window and test.

  • My new version of Firefox (downloaded automatically) on my Mac displays long paragraphs in emails as a single line, so the end of the paragraph is off the screen. How can I make it automatically wrap to fit the screen?

    Long paragraphs in incoming emails display as a single line, with the end of the paragraph running off the screen. I want to make it wrap automatically to fit the screen.

    For the browser window, just drag it to the top left of the screen (click and hold on the top bar with the traffic lights to drag), then in the bottom right of the window you'll see a rectangle with diagonal hatching. Click and hold on that and drag the window to the size you want.
    Clicking on the green dot at top left will expand the window to fit the screen, clicking it again will shrink it back to where it was (this doesn't work in Finder windows quite the same).
    The menu bar size is set in the bowels of the OS, though there may be third-party applications which can alter it.
    As it's size is relative to the screen resolution, you could try reducing the resolution in System Preferences > Displays to see if that would suit you better.

  • Phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on

    hi,
    phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on.
    I purchaged it before one month onl. So i wont understand how it comes. Please help me. I am waiting for you reply.

    "Your face is so ugly, it broke your phone!" Ha ha. Get it? How I was joking there? About your iPhone not working correctly after... <sigh>
    But seriously, you said the situation only happens when you have been on a long call, so maybe the iPhone is just autolockng?

  • The entire window went off the screen to the right, can see icon at bottom but when I click on it it zips off to the right.

    I was working in Firefox and clicked on something which made the entire window flash off to the right, unable to be seen. The Firefox icon is available at the bottom but when I click it, it sends the screen off to the right. Click on icon again and it will take it from "off the screen" back into the icon. I tried restarting with no change. It only affects one user on the computer.

    Hi,
    See if these Links for Home Sharing add any light to the problem
    Understanding
    http://support.apple.com/kb/HT3819
    Troubleshooting
    http://support.apple.com/kb/TS2972
    How to
    http://support.apple.com/kb/HT2688

Maybe you are looking for

  • Is it possible to install Mountain Lion on a Macbook Pro 2,1

    I've heard it's possible to install Mountain Lion on several unsupported Mac models, but i was wondering if it's possible for the MacBook Pro 2,1 late 2006 model? Here's the link for the unsupported model http://www.karthikk.net/2012/02/15-steps-to-i

  • ACR 4.5 Did Not Fix Photoshop Bug Crashing

    I posted this in June Bug: Multiple Files Open ACR Crashes Photoshop... Buko, "Bug: Multiple Files Open ACR Crashes Photoshop..." #1, 10 Jun 2008 2:57 pm I just went back to my normal workflow with ACR 4.5 (after leaving it because of the problem) an

  • Opening camera raw files in photoshop

    Does anyone know if it is possible to open my .NEF files from my D4s in photoshop?  Do they have to be converted in some way first?

  • Mailbox Database Copy Status Failed

    We have 2 Exchange 2010 servers.  We run a DAG.  Recently I have noticed that database copy DB2 which is located on Exch-1 is showing "Failed".  Database copy DB1 which is located on Exch-2 is showing Healthy.  I searched online for information regar

  • Ports to be opened on Outer firewall in DMZ

    Hi, We are planning for an Internet facing portals for which we are putting the SAP Web Dispatcher in the DMZ and the portal and backend systems behind the inner firewall. We have a EP7 connecting to ECC6 and BI systems. Can anyone tell me if it is s