Taking old name of dimension after coping it with new name

Hi,
I have an existing account dimension named Account in EPMA shared library .And I want the almost same structure for another application.So I copy the my Account dimension and then renaming it as New_Account and then use it in another new application.But after deployment it takes the the old name i.e Account instead of New_Account when I checked it from planning/essbase.
Please help.
Thanks in advance

Hi,
Planning and Essbase picks up dimension alias for the name of the dimension. Try deploying again after changing the dimension alias.
Cheers,
Alp

Similar Messages

I renamed my Apple ID with new name but the old password is no more working. What should I do ? After renaming I am getting pop up message regarding icloud on my screen but I am unable to set off the message box now

I renamed my Apple ID with new name but the old password is no more working. What should I do ? After renaming I am getting pop up message regarding icloud on my screen but I am unable to set off the message box now

What to do after you change your Apple ID email address or password - Apple Support
ÇÇÇ

Old address still showing in contact after I edit with new address. However, it shows correct address when in edit mode. Is this a new glitch on the iPhone iOS 7?

Old address still showing in contact after I edit with new address. However, it shows correct address when in edit mode. Is this a new glitch on the iPhone iOS 7?

1) Is it a video clip? Something you recognize? To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
2) What are your sequence settings? Right-click your sequence and choose "Item Properties" to verify.

My lost iPad is using my iCloud storage with new name.

I lost my iPad in Oct-2012. It appears that it was wiped out since it disappeared from Find My iPad list within 15 min of the incident.
However, now I can see that the iPad with new name is using the iCloud storage from my account.
Any hope to retrieve it. What should I do?
I did file the report with the police after the incident, but they have not taken any action so far (since I lost it in a store with survelliance camera, they could have asked the 15 min video).
Thanks,
-Naveen

You're a genius lol.. I posted the same question about a popup in the way so I can't unlock my screen. I thought if I turned it off and back on then the popup blocker should disappear, but I couldn't even access the power off slider. I never knew how to reset the iPad.. I did what you said and it worked.. yay. My iPad is back in business thanks to you lol... I saved $20 for a simple tech repair lol, I am a happy lady right now.

TextEdit: how save document with new name?

I tryed in many ways to save modified document with new name with TextEdit but no one works for me.

Use TextEdit > File > Duplicate.
For this example, my original document is named Lorem.rtf. I open it with TextEdit, and then Duplicate it. A new TextEdit document window appears. Its default name is Untitled (Lorem copy). If you pass your pointer near the right parenthesis, a downward pointing triangle appears. Click that and the Name field has Lorem Copy preselected. Press the delete key to erase this name, and enter the new name — followed by a return to set it.

AppleScript to resize images and save with new name

I want to make an apple script, which resizes all images of a folder regardless what kind of filetype.
The source folder will change every day.
With the script i want to choose a source Folder, resize all images and save the files with my jpeg options in the same folder, but with adding „_ipad“ in the filename.
I tried to edit an existing script from this forum, but in Photoshop 5.1 i get the error-message "This function is possibly not available in this Version" in line 18 "save in file newFileName as JPEG with options myOptions"
How can i save the documents with new name in the existing folder?
Thanks.
This is the script i’m working with:
set inputFolder to choose folder with prompt "Wähle einen Ordner:"
--set destinationFolder to choose folder with prompt "Wähle einen Zielordner" as string
tell application "Finder"
          set filesList to (files of entire contents of inputFolder) as alias list
end tell
tell application "Adobe Photoshop CS5.1"
          set UserPrefs to properties of settings
          set ruler units of settings to pixel units
          repeat with aFile in filesList
open aFile showing dialogs never
                    set docRef to the current document
                    tell docRef
                              set newFileName to my getBaseName(name)
--resize image height 240 resolution 72 resample method bicubic sharper
change mode to RGB
resize image resolution 72
                              set myOptions to {class:JPEG save options, embed color profile:true, quality:12, format options:progressive, scans:3}
save in file newFileName as JPEG with options myOptions
                    end tell
close the current document saving no
          end repeat
          set ruler units of settings to ruler units of UserPrefs
end tell
on getBaseName(fName)
          set baseName to fName
          repeat with idx from 1 to (length of fName)
                    if (item idx of fName = ".") then
                              set baseName to (items 1 thru (idx - 1) of fName) as string
                              exit repeat
                    end if
          end repeat
          return baseName
end getBaseName

This seems like a Photoshop error not an AppleScript one. Have you looked in the Photoshop dictionary to see if the command you are getting the error on exists and if it has those options?
If all you want to do is resize image files and save the resized image file you might want to look at Automator. Specifically the Scale Image action under Photos.
regards

I downloaded pages with an old account. How do I update with new account?

I downloaded pages with an old account. How do I update with new account?

Which Pages did you download with the old account? Which update are you thinking about?
For updating you usually have to use the same account.

Creating New db(with new name) with the old db backup sql server 2008

Friends..
version: Sql Server 2008
I have a database in a name college1 (more than 200 tables and view etc...)
i want to create a new db with all the structures including the data of the above db college1 with a new name college2
so...i finished the step 1 successfully.. what are the other steps i have to do...like validating the invalid objects. etc....
Step 1:
RESTORE DATABASE college2 FROM DISK = 'D:\DailyDBbackup\college1.bak'
WITH replace,
move 'college2 ' TO 'D:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\college2 .mdf',
move 'college2 _log' TO 'D:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\college2 _log.ldf';
step 2: ?
Step 3: ?
thanks...

but...when i type
use college1
select * from (it will display all tables under the above db)
but when i do..
use college2
select * from (only system tables are displaying..)
Did restore completed successfully ? If yes Expand database , can you see tables in the new database you restored ?. Sometimes when you type incorrect word which does not matches anything you wont get help from intellicense you should not be worried about this
if tables are there in new database college 2
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Printer Share Migrations when SCCM DP is replaced with new name

we are inprocess of replacing the remaining office servers which are SCCM 2012 SP1 DPs with replacement servers that are Svr 2012. in the past when we did this for the 2003 server we were able to use printmig to create a script that the user only had
to click once on a file and all the print shares were installed on the client system without them having to reinstall every print share manually.
we tried using alias thru DNS with CNAME and IPs. outcome was the old name appeared as expected but unable to print. printer error was unable to connect to printer or printer offline.
looking for an automated means with new printer migration tool for Svr 2012 or some other recognized Microsoft tool.
Michael Pace Client Services Team Allegis Group, Inc.

i need to clarify the question.
it isn't the printer migration from one print server to another.
the issue is our company does not want our users to always have to remapp their print shares everytime a office server is replaced.
the only reason we have to do so now is that active 2003 is a DP for SCCM and the replacement server is also a DP with the print server function as the old server. since the servers are active, and the swap out takes place within a several hour
period, we have to change the name on the replacement server due to SCCM. that is dilemma.
prior to sccm being in the picture, we would use printmig to export data and add that to a script that would with one click by user would reinstall all print shares on their system. (server 2003 and XP)
all our attempts to use alias have failed.
so we are looking for a similar method with do the same for the users as before but now we have win 7 with no admin rights and server 2012 r2.
Michael Pace Client Services Team Allegis Group, Inc.

Trouble registering WS objects with new name

Setup:
Master imaging computer multicasts image to others. Ran zisedit -c before starting image to clear ZISD data.Also removed System="ziswin.exe" from registry so that it doesn't run on first boot.
After image completes:
Computer boot up with auto admin logon and runs wsname.exe to rename worksotation, places the ziswin.exe back int registry so it runs on next boot, and removes auto admin settings in registry, and then reboots with ncshtdwn.exe.
Second boot:
Comes up and does it's "Zenworks is finalizing workstation" stuff then reboots once more.
Our policy registers workstations as Name:MacAddress. The Mac Address part is right, but name part is from the master computer. The NetBios name of ZISD shows up correctly with the new name. When I run zwsreg -unreg and zwsreg, it still registers with the master computers name. The only way I can get it to register correctly is to run ziswin.exe and change "workstation object" manually to the right name.
Is there a way to script a change to the ZISD so that it will update to the newer workstation name and not the master image computers or am I stuck going through and doing it manually?

seth,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Finding pictures with new name?

Hey All, please help.
Problem:
Iphoto will not show my pictures on the big screen. - this symbol show instead.
I have changed the name of the original folder in iphoto libary, I know that's the reason the pictures is not displayd via iphoto but it's allready been done.
Is there a way to help iphoto re-Locate pictures when the name of the original folder in iphoto libary have been changed? - note: the name of the indevidual picture is still as it was originally, only the folder name has been changed.
I changed the name of the folders in iphoto libary to keep track of my pictures. I like my libary now but would like iphoto to be able to show pics aswell.
What is the best way to manege pictures so iphoto and iphoto libary work together?
Thanks alot in advance,
nils
powerbookG4 Mac OS X (10.4.9)

nils,
Welcome to the Apple Discussions.
Absolutely put it back as it was. Any changes you make to the folders inside the iPhoto Library folder from the Finder will damage your library.
Is there a way to help iphoto re-Locate pictures when the name of the original folder in iphoto libary have been changed? - note: the name of the indevidual picture is still as it was originally, only the folder name has been changed.
No, there is not. iPhoto creates the folders and places the files into its structure based on its programming. You cannot change anything inside the library folder. It may be helpful for you to see a diagram of the iPhoto 6 Library folder. The structure of the Data and Modified folders should match that of the Originals folder. The most obvious difference is that the Modified folder only contains folders and files that have been modified, and is a subset of the originals folder. The Data folder should match Originals exactly, except that the image files are the small thumbnails created by iPhoto. My thanks go out again to lori_diloreto for posting her diagram.
What is the best way to manege pictures so iphoto and iphoto libary work together?
You don't. You are confusing iPhoto with a file browser. It is not. It is a database application, which means that once you import the files into the library, you access them from within the application. To access them from any other means defeats the purpose of keeping them in a database.
If you need to access your photos, there are several ways. You can drag a photo to your desktop and a copy will be created there. You can right-click (control-click) a photo and choose "Show File" from the contextual menu. A Finder window will open with the file selected. You can then Duplicate it and use the duplicate elsewhere. Better still, select all the photos you want and do File > Export > File Export to a desktop folder. This is the best way if you want to post photos to a website, upload for printing, or burn a disc to take to a photo developer. Once finished, you can delete the exports, as your photos remain in the library.
One more note about the library folder: the folders which contain your image files are based on the Film Rolls in iPhoto. You can reorganize these, as long as you do it from inside iPhoto. Select Library from the Source Pane, set View to Film Rolls. You can edit the rolls' titles in the Info Pane in the lower left corner of the iPhoto window. You can move photos between rolls, consolidate, and create new rolls. The date of the film roll (not of the individual photo) determines into which Year folder a roll will be placed in the library folder. You can edit a roll's date, which is completely independent from the date of the photos. Of course, the only organization that really matters is that which you see from within iPhoto.

Create a database from 32bit rman backup with NEW name on a 64bit system

Hello,
i'm more programmer than database admin but i need to set up a 10gR2 apex development server based on our productive instance in a short time.
For that i want to use a rman backup of the productive machine (SLES 10 32bit, DB10GR2+ASM, APEX 3.1).
Because of the less time i got, i want to use an existing machine (SLES 11 64bit, DB10GR2+ASM) as destination.
On this machine i want to create a new instance from the backup i took. I Already read note 881395.1 but i'm quite unsure about 2 things
a) It's VERY IMPORTANT that the development instance has another name than the productive instance.
When i follow 881395.1 and set the enviromental variable ORACLE_SID to another new name. Will this be all? Or will there be problems using another SID because of references in the controlfile or sth. like that?
b) It's VERY IMPORTANT that the datafiles aren't stored in the same path and with the same names as the productive instance. It is another server but there is already a copy of the database (our dba tried to set up a standby solution on this machine) and i don't want to bother this!
How can i rename the datafiles before restoring the backup from scatch?
I found this: set newname for datafile 1 to '<filesystem based filename>';
Will this help? Do i need to rename every single file? Or is it possible to set a path in which all datafiles will be restored?
c) What about the 32bit to 64 bit thing? Will this work? Or do i need to convert the database? How? RMAN Convert?
Or could RMAN convert anyhow used to realize the whole thing?
Thank you very much for your support!
Regards
Daniel

Hello,
i'm more programmer than database admin but i need to set up a 10gR2 apex development server based on our productive instance in a short time.
For that i want to use a rman backup of the productive machine (SLES 10 32bit, DB10GR2+ASM, APEX 3.1).
Because of the less time i got, i want to use an existing machine (SLES 11 64bit, DB10GR2+ASM) as destination.
On this machine i want to create a new instance from the backup i took. I Already read note 881395.1 but i'm quite unsure about 2 things
a) It's VERY IMPORTANT that the development instance has another name than the productive instance.
When i follow 881395.1 and set the enviromental variable ORACLE_SID to another new name. Will this be all? Or will there be problems using another SID because of references in the controlfile or sth. like that?
b) It's VERY IMPORTANT that the datafiles aren't stored in the same path and with the same names as the productive instance. It is another server but there is already a copy of the database (our dba tried to set up a standby solution on this machine) and i don't want to bother this!
How can i rename the datafiles before restoring the backup from scatch?
I found this: set newname for datafile 1 to '<filesystem based filename>';
Will this help? Do i need to rename every single file? Or is it possible to set a path in which all datafiles will be restored?
c) What about the 32bit to 64 bit thing? Will this work? Or do i need to convert the database? How? RMAN Convert?
Or could RMAN convert anyhow used to realize the whole thing?
Thank you very much for your support!
Regards
Daniel

Save NI report generator files with new names

I was trying to save labview library files under new names so that I could adapt the code but the 'Save As' option is greyed out. In certain cases, when I try to copy and paste the code, I get broken wires and cannot get the VI's to work.
I have been using the report generator toolkit which is quite limited. I was trying to delete a row from an spreasheet but there is no function to do this. So, one workaround that was suggested to me was to use the 'Excel Insert Cells' VI and change the code to instruct it to 'clear' cells rather than 'insert' them. This works, but I wanted to save a copy of the amended file under a different name so that it was independent of the installed library files but I can't seem to do this. I tried to copy out the code but got broken wires even though I have been able to do this in other instances.
Any suggestions?
Thanks,
Will

Hi Will,
I had the same problem with a project and found the following workaround:
To ensure the original function of any library VI, it's not recommended to just change the VI to do something else.
Therefore I expanded the VI to do both, the original functionality and the special function I needed.
I made an extra Input to the VI, which is a boolean Input.
With that extra optional Input I can now choose the function I want to do.
I made the "False" case to be default. This case works like the original function.
The "True" case is built to do my special function.
This workaround is quite easy and not dangerous. For all projects, which would use the function in their normal use case it's working just as if the file was unchanged.
And for projects using special functionality I can add a "True" constant to my VI Input and the function works as I want..
Hope this workaround helps to fix your problem!
Kind regards
adigator

How to save draft with new name

How do I save a draft with a new name? I want multiple
versions of the same page.

1. start Contribute, connect to your site, browse to the page
you want to duplicate
2. in the main menu go to >File>New
3. choose the opstion 'Copy of current page' and enter a
title for the page
4. edit amnd publish the page, enter a new filename if you
want

Project exported with new name opens in QT Player displaying original title?

When I export a movie I frquently put a new name in the "Save as" box.
The video file displays the new name on my desktop but when I open it in QuickTime Player the title at the top of the window has reverted to the original title of the project.
Why does this happen and is there any way of stopping it?

Thanks Tom, it does indeed solve my problem.
This has been going on for over 2 years and I never thought that the title in the info window could be changed as it looks extremely "permanent" and I never thought of clicking on it.
I had long accepted that I could do nothing about it but a friend phoned me up with the same problem and as I was unable to give a solution I posted on the forum, not really expecting an answer.
For the information of anyone else viewing this thread, I would point out that the "Description", "Creator" and "Tags" can also be altered should you wish.

Taking old name of dimension after coping it with new name

Similar Messages

Maybe you are looking for