Taking Photo Problem with E5-00

I bought E5-00 just yesterday. I noticed my camera have some problem while take a picture with Flash. Picture shows not clear & white shade on picture. If rooms light / day light  is enough, I can take picture without flash in very good quality & clear.
is any suggestion to fix this problem.
Thanks in advance.

I too face the same problem with Nokia E5... Any solution?

Similar Messages

  • Printing Photo problems with HP8500 + Win7 (64) bit.

    I'm having major headaches with not bring able to print correctly with the HP8500.  All my pictures are coming out darker then they should be.  I'm using the windows 7 drivers but no color control.
    I tried to put in different drivers from other printers but the only one that installed correctly in Windows 7 is Photosmart C309n but the printing comes out the same.
    I can't seem to get colors correct.  everything looks fine until it tries to print to the 8500.  I tried using 4 different photo software. 
    With the win7 drivers there is a color management tab but no ICC profile is associated with it.
    I'm using all things HP in this system including paper/ink.
    can anyone point me in the right direction.

    FYI, I've been having  problems with Win7/64bit and HP8500dn.  Here's the official response I received from HP  "Please be informed that, For Windows 7 PC, the printer driver for this model is not available". 

  • Photo problem with tungsten e

    When I click on "Photos" there is like a flash of black screen on bottom half and goes back to menu. I can view photos on desk top but cannot pull them up on two different units of tungsten e.  I s there a way to check which programs are needed to run photos on the Tungsten E?
    Post relates to: Tungsten E

    Well there are two things that have to happen in order for a hotsync to work properly
    1. Your computer recognizes the device as a palm handheld with no problems
    2. Hotsync recognizes the device as being connected.
    Unless number 1 is occuring without issue number 2 never will.
    If you are familar with your computers device manager launch that..While you are looking at the device manager attempt a hotsync and see if it recognizes the device properly if it recognizes it improperly you will see a yellow exclamation point next to it.
    If there is an exclamation point. Right click on it and tell it to uninstall drivers. then disconnect your device and perform a soft reset. Once the device boots back up reconnect and attempt another hotsync.
    Post relates to: Centro (Sprint)

  • Zen Sleek Photo - Problems with connecting device to the comput

    My zen sleek photo gives me this error message when I try to transfer nusic from Napster "Your portable device has stopped responding. To restart your transfer, please disconnect and reconnect your device. Tracks will begin transferring when the device is connected."?I have tried disconnecting and reconnecting, this does not work. I have also tried the recovery mode using the Clean up and reboot options. I am afraid to try Format and Reload Firmware, since my MP3 player continues to stop responding. I have also tried?installing Creative Zen Sleek PlaysForSure Firmware 2.0.03 and I get this error message "Your player is not connected please connect your player."? Disconnecting and reconnecting does not work here either. I was successful in initially transferring about 50 - 75 songs from Napster. I have also been able to and still can'transfer music from cd's to my MP3 player. It?appears as though Creative Media Explorer, Creative Media Source Player and?Creative Media Source Organizer are all operating OK with my MP3 player. Could my problem be related to MTP?Any Ideals?ThxRoger Conejo

    Can you transfer songs using Media Source, or Media Explorer? Yes, does not work.
    What do you mean by this? Can you transfer songs using these programs yes or no?
    Sorry, no I can't transfer music. You would first have to let WMP scan the folder where the songs are. Once they are in your Library section right click the songs and choose Add to Sync List. Then click on the Sync tab and click on Start Transfer and it should transfer over. After choosing Add to Sync List. Then click on the Sync tab and click on Start Sync I get this error message from WMP "Windows Media Player cannot access the file. The file might be in use, you might not have access to the computer where the file is stored, or your proxy settings might not be correct."?Then I click More Information and get this message from the WMP Error Center?[img]mk:angry:MSITStore:C:\WINDOWS\Help\wmperr0.chm::/wmedia.gif" alt="Windows Media Player banner art[/img] height="65" width="400"><!-- HEADGRAPH_END --><!-- Document last modified on Friday, July 30, 2004 at :27 AM -->]C00DD2: Cannot access the fileWindows Media Player cannot access the file. You might encounter this error message for one of the following reasons:
    This file is currently in use. Close the file, and then try again.<
    You do not have permission to access the server or other location where the file is stored. Verify that you have the appropriate access rights, and then try again.<
    You do not have permission to access the proxy server. Verify that you have the appropriate access rights, and then try again.<
    If you are trying to rip (copy) a track from a CD to your hard disk, you might not have permission to rip to the specified hard disk location. Verify that you have the appropriate access rights, and then try again. If the problem persists, try ripping to another folder.<
    To change the folder where tracks are ripped to
    On the Tools menu, click Options.<
    Click the Rip Music tab.<
    Click the Change button.<
    Select another folder in which to store your digital media files, and then click OK. or-
    Click Make New Folder, enter the name of the new folder, and then click OK.
    <
    Web Help[/u]
    <hr size="">?I've tried all of the above, still not working.

  • Taking Photo's with the camera and adding as a contact photo

    Using my new Palm Pre 2 and took a photo to add as a contact.
    The process is simple enough to assign the photo taken to the contact, by lining up within the square and pressing Assign to contact.
    However the end result just shows a blurred image of the enlarged photo.
    Does anyone know how a picture taken with the camera can be set to view correctly as the contact?
    Imported photo's work fine, but that defeats the object, i.e. you see a friend, take their photo but can't add it correctly to your contacts.
    Post relates to: Pre 2 p102ueu (Unlocked EU)

    Kookie wrote:
    I got an HP touch pad and when tapping the camera the screen comes up faceing me with my picture,  If I want a picture of something else I have to turn it around with the back to me and I can't see the picture to focus sit.  Is that right?
    Like, I can only take a picture toward me, not in front of me.
    That's correct - there is only one camera on the TouchPad, and it was meant for video chatting.  The camera app was added by HP as an afterthought when other Homebrew authors started writing their own "Camera" apps.
    Wyrenut 
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Photo problems with Flash Player 10

    I need help disabling Flash Player when trying to copy
    pictures from a webpage. When I copy a picture from the internet I
    usually right click on my mouse which brings up a menu with the
    option of copy or save picture as - but after downloading Flash
    Player 10 - Now when I click on the right button of my mouse to try
    to copy a picture off a webpage it brings up a menu for Flash
    Player with no option to copy anything. I need to disable or
    unselect flash player so I can copy pictures again. Any ideas on
    how to fix this problem would be greatly appreciated.
    thanks,

    What that means is that the picture you're looking at is
    being presented inside of a Flash Player SWF. Flash takes over the
    right-click menu, and if the developer has not enabled you to copy
    content (which they can as of CS4 and Flash Player 10) then you
    won't be able to do it. that helps developers protect their
    content.
    If you disable Flash Player (there are tools to do it it, or
    you can uninstall it) then you won't be able to -view- any of that
    Flash content.
    Now, this should not in any way effect images that are in
    regular HTML pages. Those would still have the regular right-click
    menu of the browser you're using.
    Regards,
    Bentley Wolfe
    Senior Support Engineer, Flash/Flash Player/Digital Editions
    Adobe

  • Lost photos problem with iphoto 2

    i seem to have lost around 90% of my photos - at least - they are not in the library when i start iphoto - but they are there when i check finder. roll 10 to roll 82 are missing. i just imported more photos - and iphoto seemed to work out that they must have been there at some stage because it named the next roll roll 83.
    anyone have any idea what has happenned ? have i lost some sort of pointer file ? thx.

    Yes, you can delete the old iPhoto Library folder to free up considerable disk space -- don't empty the trash until you've launched iPhoto again, just to make sure you didn't toss the wrong one. The files that change ofter are the ones most likely to get corrupted -- albums and/or keywords (although roll associations are also subject to corruption). Fortunately, all of those are of a temporary nature in comparison to the photos, themselves.

  • Ipod photo: problem with artwork

    It seems that on Itunes, my artowrk is all correct, but on my ipod, the imgaes are jumbled up for some of the albums. Does anyone know how to solve this problem? Thanks.

    When I try to check the "Display album artwork" box and update my ipod, I get this error message:
    The iPod cannot be updated. An unknown error occured (-50).

  • Photo problem with iOS8

    Installed iOS8 on my iPhone and now I cannot view any of my pictures - the app blinks and shuts down

    Hi sengz86, 
    Welcome to the Apple Support Communities!
    I know it can be frustrating and confusing that your photos are not organized the way they were before the iOS update. I believe the following article will help provide you some information on how to locate your photos after the update.
    Get help finding your Photos in iOS 8
    Have a great day, 
    Joe

  • I have been taking photos with my Ipad for several months and sending them via email and Facebook.  Now it will transfer photos to FB but not email addresses.   What could be the problem?          email an

    Have been taking photos with my Ipad and sending them to email address and FB.  For some reason it will now send photos to FB but not my email address.  What could be the problem?

    Does your email provider have a limit on the total file size allowed on their server? It could be that emails with photos send in the past are still on your email server. They might even be in the servers trash folder. If the total MB of those emails exceeds the amount allowed then no additional emails can be received. Try using a web mail page to check and edit what's on the email server.

  • I can't move photos from iPhoto to my secondary hard drive or to a burn folder.  I have never had a problem with this before.  This is something new.   They will not drop into either folder.  Nothing happens.

    I can't move photos from iPhoto to my secondary hard drive or to a burn folder.  I have never had a problem with this before.  This is something new.   They will not drop into either folder.  Nothing happens. 
    I checked my secondary harddrive and there is plenty of memory.
    I emptied my burn folder but the photos still will not drop into it.
    I created a new burn folder, no luck with this either.
    230 photos is the maximum size of the events I am trying to move from iPhoto to save elsewhere.
    I have shut down and restarted my computer.   No change. The photos still will not drop out of iPhoto.
    My Mac Computer Storage shows that I have 62.2GB free out of 249.2GB (movies, photos and contacts taking up the most space)
    My Lacie External Harddrive (2TB capacity) shows that I have 1.79TB available.  It shows that 207,729,520,640 bytes (207.73 GB on disk) are used.
    I have never had this problem before.  It is usually very easy to move my photos from iPhoto.
    I am not a computer expert (I work in surgery so don't have a need for lots of computer knowledge) so please explain in simple terms.  
    Thank you so much for any help you can provide.
    I really appreciate it.

    YES Terence!  Thank you. Exporting allowed me to move my photos from iPhoto into the Burn Folder on my desktop.   But that doesn't explain why I'm having to go that route now.   Have I done something (accidentally changed some setting) on my computer that will not allow me to just click and drag anymore?   I really liked the convenience of the click and drag option. 
    I don't have the time tonight to export and burn a lot of CD/DVDs.  I'll try that tomorrow and make sure my photos are moving properly.  I also need to export photos to my external hard drive to make sure that route is working. 
    Wouldn't you know that my Apple Care Plan runs out this Wednesday?!  I need to make sure everything is working properly before that expires. 
    Thank you so much for your help.   I really, really appreciate it.

  • Problems with Uploading photos in PSE 7

    I've had nothing but problems with PSE 7. It is pretty slow and crashes once every half hour or so.  I tried loading 8 but after it crashed numerous times and wiped out some previous work I took it off. I bear with the poor functionality of PSE7 but now I can't upload any albums to PS.com.  I've uploaded over 16,000 pics and numerous albums before with no issues but now it's locked me out.  I've checked and done ALL the obvious things but I'm missing something. I have over 60G of space left so no space issues.  I know it must be something that I'm doing.  Is there as easy way to get help ... someone to speak to maybe as this is really frustrating. I want to work with this program but it is way too difficult for me ... and I've taking classes to help.
    Any thoughts or help would be greatly appreciated.  Dan D

    Mark ... Thank you so much for replying.  Interestingly enough 3 of the 4 albums that I was trying to upload ... went through last night.  That was almost 10 days after I created them and loaded the album onto my organizer. As for a few details ... here they are;
         ... each of the four albums were anywhere 30 to 57 photos @ about 4-6 MB each photo
         ... they were created around 10 days ago
         ... each time I created an album I made sure that I went through the process in its entirety as sometimes the organizer CUTS you off midstream (then the result is NO upload)
         ... when they didn't upload I tried reloading (a few times) them onto PS.com by recreating them.
         ... last night 3 of the albums went through and uploaded BUT ...
              ... album #1 was repeated twice
              ... album #2 was uploaded only once
              ... album #3 was repeated 3 times (once with a different name as I tried changing the name once to "solve my problem"
              ... album # 4 didn't upload
         ... I have an 100G account and have used about 24G of space
    I have just tried to upload the 4th album.
    I appreciate your help.  I am convinced that it is a server issue with PS.com as I've done this 31 times before.  If you have any thoughts whatsoever I'd appreciate them very much.
    My albums are at  ...   www.photoshop.com/user/dimaggio   The first 6 you see are the albums in question ... unless my forth album downloads.
    Thanks again,   Dan

  • There is a problem with the photo with the filename "null". The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book.

    Absolutely INFURIATING.
    I have spent absolute hours building a photo album for the first year or my sons life. Sorting through quite literally thousands and thousands of images. Got a brilliant looking album using 177 of them.
    Now everytime I try to check out it won't get past page 1 of building the book.
    It says the following "There is a problem with the photo with the filename "null". The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book.".
    The images all look perfect. I have even tried taking them out and re adding the first page images from the library.
    Same problem.
    This is so annoying. So far I have NOT been happy with this iphoto application having nothing but problems with missing thumbnails. Corrupted images. Things that have never happened to me using a windows machine.

    Do the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
    For testing, create a new book with only the images you want to check.
    If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library.

  • Problem when taking photos iPhone 4

    Hello Guys,
    I have a problem with my iPhone 4 when I take photos. When I use the flash the photo come out completely white/light blue. When I don't use it, photos are really bad quality and not really on focus.
    Do anyone else had the same problem? Anyone knows what is the problem with my phone?
    It's a real shame since iPhone is famous for taking amazing pictures.
    Thanks.
    N.

    Hi, I have the same problem with my iphone 4. Pictures are poor quality. They seem somewhat blurred in the edges of the object. I made a test photo comparing my phone with my friend's iphone 4 and there is quite a difference in quality. Here you can see them. We were next to each other. His photo has even a lower definition, but it looks much sharper and brighter than mine. We focused on the same spot.
    Can anybody help with this problem?
    Thanks!
    my phone
    my friend's phone

  • Problems with Safari Loading Sites and Photos

    For the past week (Feb. 2015) I've experience problems with Safari loading websites on my 2009 20" iMac desktop. Running version OSX Lion 10.7.3  4 GB.   Intel Duo Core 2.66 GHz
    Mac also will frequently not upload photos at websites like Yahoo News or Facebook.   It does this throughout the day.
    So, I downloaded Chrome, thinking it would be a better browser if Safari is not functioning.  Chrome is just slightly better, and when it won't load a website I get the following error message from Chrome: DNS_PROBE_FINISHED_NO_INTERNET.
    I'm debating taking the Mac to the Apple store for diagnosis or repair today, but if anyone else is experiencing similar problems, could you please offer some solutions as to what is going on.
    Thank you.
    AngieRK

    Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load - Apple Support
    Unless you have a good reason not to, you should update the OS to version 10.7.5.

Maybe you are looking for

  • Safari Keeps Crashing, can anyone help?

    Hello, If anyone can help i would greatly appreciate it. My safari keeps crashing, and will no longer open a single browser. I have updated my software, tried emptying my cache, and doing many of the other techniques that the discussion board suggest

  • Keithley 2000 DMM AC Read Overflow

    I've been having problems controlling a Keithley 2000 DMM during AC volts measurement using IVI. When reading AC Volts the DMM will intermittently sense an 'overflow' and return the value NaN. I'm using IVI and TestStand 3.0 but get the same problem

  • Localizing Error Messages in OIM

    I was wondering if someone can tell me how to localize error messages in OIM. Is it as simple as adding the error codes to the property file, similar to UDFs? thanks

  • Where do I go to register my $15 iTunes gift card

    Where do I go to register my gift card on my iPad

  • Direct Material Desciption not Replicated over to SRM

    Hi, I am using SRM Server 5.5,Classic Scenario.When we replicated materials the material Descriptions are not transferred.Can't see in Commpr01.Any clues please? Thanks & Regards, Sudhakar