Taking the full resolution photos from my iPod and putting them on an eMac
I'd like to put all the 5000+ photos that are on my iPod (and my new iMac) onto my wife's eMac. HOWEVER, I really don't want to mess with anything else on her computer. (Truth be told, I'm under a "never touch my computer again" order from doing on too many "improvements".)
But I would like her computer as a back up on the family photos. So, how do I do it?
Also, there are several album's worth of somewhat good music that she's purchased using her computer. How do I get it onto my computer? (Again, without endangering her stuff in any way?
Thanks.
If you copied photos to your iPod using the full resolution option, enable disk use, open your iPod in Finder, open the photos folder then open the "full resolution" folder and drag the photos out of that folder to the desktop. For enabling disk use look here.
Disk Use.
Similar Messages
-
How do i take my music, apps, and photos from one ipod and put it on another ipod?
I got a new ipod but still have my old one, how do i take everything from my old one and put it on the new one?? please help me!! thanks
Sync them to the same computer running the same iTUnes logged into the same iTunes account and stuff should transfer over quite easily
-
How do i sync full resolution photos from computer to phone?
anyone know how to sync full resolution photos from computer to phone using itunes? itunes does not show the option to "include full resolution photos." photos i'd like to sync include both photos taken with iphone and photos i've taken with another camera. i also don't have to use itunes, whichever program gets the photos in their separate folders back onto my iphone in full resolution is fine. using itunes 10 / iphone 4S / ios 5.0.1
thanks!As far as I know that's not possible when using iTunes. See this post: https://discussions.apple.com/message/15172235#15172235 and this one https://discussions.apple.com/message/15254581#15254581
-
after restoring the iPhone, the iPhone can not get the high resolution photo from album of iCloud, unless re-share all the photo to the iCloud.
If you plug up both to computer, open itunes, click "back up to computer" on both (not necessary for the one that's being transferred to) then on the one that's sending data click "back up" in the iTunes menu. It will then back up (if not already done in sync). Now plug up the second one (being transferred to) and on the iTunes menu, click "restore from backup" then choose the device you just backed up, and click "ok" or what it says.
Hope this helped
P.S. I am referencing to using iTunes <11. Some features I show here might not be available in iTunes 10 -
As the title says I need help on how to take a photo from one event and put it in another, without dragging to desktop and dragging back into iPhoto and moving it to the event folder I want it in. Right now when I want to move a picture from one event to another I drag it to my desktop then delete it from iPhoto then I drag it back into iPhoto and put where I want it.An example would be taking a photo from the Christmas event and add it to a specific person event. Can I do that within the events section without all the dragging. Also is there anyway I can remove duplicates from iPhoto without going through each and every file. Any help would be greatly appreciated.
Apple doesn't make it easy to do what you want. However, here's how I do it.
Select the photo you want to move and create a new Event for it via the Event ➙ Create Event menu option.
In the Event mode select the new Event with the one picture and drag it onto the Event you want to move the photo to. -
my iPhone was stolen last night and I'm trying to recover all my photos from that phone and get them on my mac laptop. The iCloud photo stream only imported 1,000 photos from my stolen phone. How can I retrieve all of my other photos?
You have to reset the device to Factory Settings in order to restore it from an iCloud backup. You probably want to back it up as is before you do this.
To do the reset after you have backed up the current device, go to Settings>Reset>Reset all Content & Settings. This will erase the device. If you are signed onto iCloud with Find My iPhone turned on, go to Settings>iCloud and scroll to the bottom to sign out of iCloud before you do the reset.
Once you have reset your device, you will set it up like a new phone. When it asks if you want to restore it from an iCloud backup, select the backup you want to restore it from.
Cheers,
GB -
I just bought lightroom 5. I had lightroom 3. Now when I export my photos from lightroom 5 and upload them into my photoshop elements program to edit the photo files are at 100% zoom percentage. When I upload photos from my old lightroom 3 program they come into photoshop at 14% zoom percentage which is what I want them to come in at so I can zoom them in to detail the skin. What might have changed settings wise between the 2 programs, I cannot figure it out.
I just bought lightroom 5. I had lightroom 3. Now when I export my photos from lightroom 5 and upload them into my photoshop elements program to edit the photo files are at 100% zoom percentage. When I upload photos from my old lightroom 3 program they come into photoshop at 14% zoom percentage which is what I want them to come in at so I can zoom them in to detail the skin. What might have changed settings wise between the 2 programs, I cannot figure it out.
-
I have an iPod whose contents I want to transfer to a newer Ipod. At some stage when I thought I was syncing correctly I wasn't so I lost the music files from my library. Is there any way to get them back from the older iPod and put them onto the newer one again?
Have you not got a backup of your content on, for example, external drives ? If not then you could have a look to see if any of the utilities mentioned in this old post still exist and work : https://discussions.apple.com/message/11014893?messageID=11014893#11014893
-
I want to take the photos off my iPhone and put them directly onto an external hard disk - I don't have any room left on my computer. I want to bypass iPhoto altogether. When I link my iPhone to my computer, it only opens in iTunes, which only gives me the option to save my photos to iPhoto. Help! This is seriously frustrating!.
Additionally, I'd like to be able to take the 2000+ photos out of iPhoto and put them on a disk in a folder. I have managed to export them to the hard disk but it's just plonked all 2000+ photos in a list - not ideal if I want to use it for anything else. And then I have to manually delete the photos from iPhoto. Is there not a quick and easy way of dealing with this?
Anyone got any bright ideas? Thanks for your help!I too would like to be able to do this. Just put them where i want the. IFTT a scripting app will put the images in dropbox for you , but its been pretty iffy.
-
I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto. Thanks
To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.
-
How do i take pictures from my Voyager and put them on the pc????
How do i take pictures from my Voyager and put them on my pc with a USB Cable????
christinafam5 wrote:
How do i take pictures from my Voyager and put them on my pc with a USB Cable????
You'll need a MicroSD Card in the Voyager's Card slot. Copy the photos from the internal memory of your phone to the SD Card. Now you're ready to install the USB Drivers on your PC so you can connect your phone. Download the Drivers from Verizon's web site or go to http://www.lgforum.com/resources and under the Verizon section, download the "LG_USB_Drivers.." file and install the drivers on your PC. Next plug the Voyager into the USB port and from the "Tools" menu on the phone go to USB Connection and choose Mass Storage Mode and the SD cad in your phone will show up on your PC. You can now copy files to and from the Voyager. -
I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??
1-800-676-2775 apple support tech support 1 800 275 2273
If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
click the apple----->click about this Mac ------> click on version----> until you see the serial number. You may have to do this a couple of times if it freezes before you have all the numbers. A camera might help.
Good Luck -
I have iCloud Photo Library Beta on my iPhone 6. Can I delete photos from my iPhone and have them remain in my Photo Library?
Yes, that should be possible.
Apple’s iCloud Photo Library- A Quick How-To Guide | Re-code
iCloud Photo Library — Everything you need to know! | iMore
iCloud Photo Library beta FAQ - Apple Support -
Can I pull songs off my iPod and put them on my computer?
My husband's iPod classic needs a new battery. The problem is that he didn't back up his songs on the computer, so the only place they exist is on his iPod. As you know, when I send his iPod in for a new battery, his songs will all be gone.
So I was told recently that there is a way to pull songs off an iPod and put them into iTunes on a computer. Is this really possible? If so, does it involve new software or hardware? Can you give me specifics? Where is this software/hardware available? Our computer is a PC running Windows XP. I want to do this for him for his birthday. Any advice you can give me will be greatly appreciated!
Thank you!For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod to a computer.
For all other non purchased content (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.
There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer. -
How to read the 'full resolution composite' from a .psd file?
I'm working with 16-bit .psd files and have the "maximize compatibility" switch turned on in CS2. When a file is saved, a message box appears indicating that PS is generating a "full resolution composite." I'd guess this is stored in the .psd file somehow, because some of the 3rd party image viewers are able to display the image when the compatibility switch is used, but are unable to display the image otherwise.
My question is: how can I read this full resolution composite from the .psd file outside of Photoshop?
If this is the wrong forum to post this question, I'd appreciate it of you'd tell me a better place.
Thanks,
Dave H.As you guess, it is stored in the PSD, but only with the Maximise Compatibility switch. Without that switch, a dummy image is stored which has the text "This layered Photoshop file was not saved with a composite image.", in English, German, Japanese and French.
My program
psdparse extracts each layer in an 8-bit file as a PNG, and the merged image for both 8- and 16-bit files. That link is to a Subversion repository containing source code.
Maybe you are looking for
-
My laptop was stolen, how do I get my purchases back?
Recently, my laptop was stolen and I was just wondering if it would be possible to get all my past iTunes purchases back? I had a lot of movies and music that were on that computer. Unfortunately, I only had some of the purchases on my iPod. Can anyo
-
How do I use find my iPhone with a iPod Touch 3g?
l I tried using it on a friends iPod Touch, because I lost mine. I tried regestring but It didn't work, to my dismay I learned that MobileMe was closed to new subscribers. I tried doing it on iCloud, but iCloud is only for iOS 5. So how do I registe
-
I need to connect an external webcam to an iPad two, is this possible?
I need to connect an external webcam to my ipad two. Any idea if this is possible and how do you do it?
-
Since Firefox update (6.0.2) many sites load very slowly and some do not load at all (green circle rotates infinitely) until "Reload Current Page" is clicked on 2 to 12 times. Returned to version 5. No more slow load. Automatically re-updated me to 6
-
TNS- protocol Addapater error.
Hi Every one . pls Help on this.. ERROR 426: errors found in /u01/app/oracle/products/8.1.7/network/log/listener.log: TNS-12560: TNS:protocol adapter error TNS-00530: Protocol adapter error Solaris Error: 130: Software caused connection abort TNS-125