Taking time to fetch records from BSEG

Hi all,
When iam fetching wrbtr,augdt,zterm fields from BSEG table by passing VBELN and BUKRS it is taking lot of time to get.My query goes like this
select vbeln wrbtr augdt zterm from bseg into table t_bsegtab for all
entries in t_vtab where bukrs = p_bukrs and
vbeln = t_vtab-vbeln.
Is there any wrong in statement.If not what is the possible solution for that.
regards
kiran

Hi,
As BSEG is a cluster table and has open/close item details of Vendor, Customer & GL account, as far as possible avoid quering BSEG instead use the relevant tables to get the data, BSEG has the combination of following tables,
BSID & BSAD --> Customer Accounting details
BSIK & BSAK --> Vendor Accounting details
BSAS & BSIS --> G/L Account details
If your requirement is to get the open/close items for Vendor, access BSIK & BSAK tables by passing the key fields in the where condition.
Hope this helps, get back for further clarifications,
Rgds,

Similar Messages

Time out error while fetching records from table BKPF

Hi,
I am fetching records from table BKPF using BUKRS & AWKEY in where clause. Query is as follows:
 SELECT BELNR XBLNR AWKEY
 FROM BKPF
 INTO TABLE L_I_BKPF_TEMP
 PACKAGE SIZE 500
 WHERE BUKRS LIKE L_C_EG
 AND AWKEY IN L_R_AWKEY .
 APPEND LINES OF L_I_BKPF_TEMP TO I_BKPF .
 ENDSELECT .
Program is giving time out error. There are 25628 records in range L_R_AWKEY , i m fetching 500 records at a time using PACKAGE SIZE. But the execution of prog stops on this query.
Please suggest something to overcome this problem.

Hi
Rui is right,
if you need to get the data by operation parameters u have to use the fields AWTYP and AWKEY.
In this selection u can omit the company code.
SELECT BELNR XBLNR AWKEY FROM BKPF
 INTO TABLE L_I_BKPF_TEMP
 PACKAGE SIZE 500
 WHERE AWTYP = <......> "<------------
 AND AWKEY IN L_R_AWKEY .
 APPEND LINES OF L_I_BKPF_TEMP TO I_BKPF .
ENDSELECT .
Max

Performance problem with selecting records from BSEG and KONV

Hi,
I am having performance problem while selecting records from BSEG and KONV table. As these two tables have large amount of data , they are taking lot of time . Can anyone help me in improving the performance . Thanks in advance .
Regards,
Prashant

Hi,
Some steps to improve performance
SOME STEPS USED TO IMPROVE UR PERFORMANCE:
1. Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
2. Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
3. Design your Query to Use as much index fields as possible from left to right in your WHERE statement
4. Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
5. Avoid using nested SELECT statement SELECT within LOOPs.
6. Avoid using INTO CORRESPONDING FIELDS OF TABLE. Instead use INTO TABLE.
7. Avoid using SELECT * and Select only the required fields from the table.
8. Avoid nested loops when working with large internal tables.
9. Use assign instead of into in LOOPs for table types with large work areas
10. When in doubt call transaction SE30 and use the examples and check your code
11. Whenever using READ TABLE use BINARY SEARCH addition to speed up the search. Be sure to sort the internal table before binary search. This is a general thumb rule but typically if you are sure that the data in internal table is less than 200 entries you need not do SORT and use BINARY SEARCH since this is an overhead in performance.
12. Use "CHECK" instead of IF/ENDIF whenever possible.
13. Use "CASE" instead of IF/ENDIF whenever possible.
14. Use "MOVE" with individual variable/field moves instead of "MOVE-
CORRESPONDING" creates more coding but is more effcient.

How can i fetch records from 3 tables in a single query without using join

Hi.
Can any body please tell me How can i fetch records from 3 tables with a single query without using joins
Thanx
prabhudutta

Hi Prabgudutta,
We can fetch the data by using the views concept.
Go throuth this info we can know the how to create view and same like database table only we can fetch the data.
Views conatin the data at runtime only.
Four different view types are supported. These differ in the
way in which the view is implemented and in the methods
permitted for accessing the view data.
Database views are implemented with an equivalent view on
the database.
Projection views are used to hide fields of a table (only
projection).
Help views can be used as selection method in search helps.
Maintenance views permit you to maintain the data
distributed
on several tables for one application object at one time.
step by step creation of Maintenance view:
With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
It can be set in transaction SE11 - Tools - Table maintenance generator.
Table maintanance Generator is used to manually input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under attributes tab
2) utilities-table maintanance Generator-> create function group and assign it under
function group input box. Also assign authorization group default &NC& .
3) select standard recording routine radio in table table mainitainence generator to move table
contents to quality and production by assigning it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers this dialog box appears when you click on create button
6) save and activate table
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
SM30 is used for table maintenance(addition or deletion of records),
For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
Sm30 is used to maintain the table ,i.e to delete ,insert or modify the field values and all..
It creates the maintenance screen for u for the aprticular table as the maintenance is not allowed for the table..
In the SE11 delivery and maintenance tab, keep the maintenance allowed..
Then come to the SM30 and then enter the table name and press maintain..,
Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
Then create,,,
Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
We use SM30 transaction for entering values into any DB table.
First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
Then it will create a View.
After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
Hope this resolves your query.
Reward all the helpful answers.
Rgds,
P.Naganjana Reddy

PDE-PLI031 Unable to fetch record from table tool_modulre

Dear ALL
I am creating PL/SQL Libraries in report builder.
but When I try to save the Library to database, a error
PDE-PLI031 Unable to fetch record from table tool_modulre.
Would you please tell me how to solve this problem
and why it coming
thankyou very much
pritam singh

Hi ,
Saving a library (.pll) to database would store the object inside specific tables that are to be created.
If you are using 6i, then you should find toolbild & toolgrnt.sql files which you have to run in the order specified. The above scripts creates the necessary tables and henceforth you won't get those errors while saving.
Hope this helps.
Thanks,
Vinod.

How to fetch records from the database into a combo box?

Hi:
I´m really new with ABLBPM and I´m trying to fetch records from the database to display them into a combo box as valid values for a presentation but I´m using a dynamic method with this code:
for each row in SELECT campo1, campo2 from TABLE
do
solicitudes[] = [row.campo1, row.campo2]
end
return solicitudes
And the debugger says that SQL instructions can be used only in fuctions and procedures that are executed on the server.
Do you know another way to do it?
P.D. Sorry for my terrible english
Greetings

Hi Steve,
Thank you, your idea is perfect, but when I try to run the screenflow where the combo should be filled I get this error:
fuego.lang.ComponentExecutionException: No se ha podido ejecutar correctamente la tarea.
Motivo: 'java.lang.NullPointerException'.
 at fuego.web.execution.InteractiveExecution.setExecutionError(InteractiveExecution.java:307)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:166)
 at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
 at fuego.webdebugger.servlet.DebuggerServlet.redirect(DebuggerServlet.java:136)
 at fuego.webdebugger.servlet.DebuggerServlet.doPost(DebuggerServlet.java:85)
 at fuego.webdebugger.servlet.DebuggerServlet.doGet(DebuggerServlet.java:66)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
 at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
 at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
 at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
 at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
 at fuego.web.execution.servlet.ServletExternalContext.forwardInternal(ServletExternalContext.java:197)
 at fuego.web.execution.servlet.ServletExternalContext.processAction(ServletExternalContext.java:110)
 at fuego.webdebugger.servlet.DebuggerExecution.dispatchComponentExecution(DebuggerExecution.java:64)
 at fuego.web.execution.InteractiveExecution.invokePrepare(InteractiveExecution.java:351)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:192)
 at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
 at fuego.webdebugger.servlet.DebuggerServlet.doDebug(DebuggerServlet.java:148)
 at fuego.webdebugger.servlet.DebuggerServlet.doPost(DebuggerServlet.java:82)
 at fuego.webdebugger.servlet.DebuggerServlet.doGet(DebuggerServlet.java:66)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
Any ideas??
Thanks and greetings

Sender JDBC Adapter : Fetch records from multiple tables

Hi Friends,
I am using sender JDBC adapter to select few records from DB2 database table.
This scenario is working fine.
Now my requirement is to fetch records from 3 tables. These table are independent to each other. There is no primary key or foreign key.
Please let me know how to write the sql in sender JDBC adapter to fetch records from these 3 tables.
Thanks,
Sandeep Maurya

hi sandeep...
if the tables are completely independent and do not share any primary / foreign key relation ship...
why dont u think towards creating a seperate interface for each of them..
or if u still want to select from multiple table at once..the best way would be to write a stored procedure on the sender side which do all the fetching n processing and pass the final resultset to PI
or u can think towards fetching the data from 1 table and then in UDF do lookup from other tables..which again is tricky and performace intensive

SQL query to fetch records from 26 onwards

Want to know SQL query to fetch records from 26 onwards.

See the fifth entry on the FAQ page:
Re: How to attach a java bean in forms6i

How to delete a record from BSEG table

Dear Experts,
How to delete a record from BSEG table.
If there possible to delete some records from transparent table ?
Please help.
Regards,
Tan

Hi,
Deleting a record from a standard table can be done only if table maintenance exists - Cehck tcode - SM30. But it is not advisable to delete records, coz the records may be dependent on many other tables. If u delete in a single place, there may be chance that inconsistency in the data happens and hence will affect ur financial statements.
Pls. assign points, if useful
Regards,
Sridevi

Fetch records from Database based on Input value

Hi Experts,
In my mobile application, I have designed one input field with F4 help or input assist. I need to fetch records from database based on that input and need to display records in table.
My question is:
How to fetch the records from database/back end based on the input value and display them as table format as we are doing in SAP ABAP?
Here, I need to fetch the records based on input value available in the UI screen and pass that value to gateway, fetch the records from database and need to bind with table in SAPUI5.
Kindly share the whole process flow with sample code for this requirement. Hope I have explained the requirement in detail.
Thanks In Advance..
Regards,
Arindam Samanta.

Hi,
Try something like this.
In this, I am passing From date, To date, RelGrp, RelStr, Uname as input. Then I am storing those values in variables and passing this data in Odata request.
OData.read({ requestUri: "http://xxxx:8000/sap/opu/odata/sap/Z188_PO_SRV/pos?$filter=Docdate le datetime'"
                + todateformat+"T00:00:00' and Docdate ge datetime'"
                + fromdateformat+"T00:00:00' and RelGrp eq '"
                + relcode +"'and RelStr eq '"
                + relstg +"'and Uname eq '"
                + username+ "' "},
function (data) {
console.log(data);
When we are giving correct inputs it will goes to Success function and get the data from back end.
In console we can see the data.
Hope this will helps to you.
Thanks&Regards
Sridevi

Fetching record from table and displaying in JSP while loading page -struts

Hi all,
I have a problem relating to struts .
I am fetching records from database and I want to diaplay those records in corresponding fields in the jsp page.
I am using Struts MVC Framework.
I am giving the sample code below.
In my action class i am giving the following code.
String sql="Select empname from emp where empcode='1' ";
ResultSet rs=S.executeQuery(sql);
if(rs.next()){
EditForm e=new EditForm();
e.setEmpname(rs.getString(1));
In my Action Form
I gave setter and getter methods for Empname
public String getEmpname() {
return empname;
public void setEmpname(String empname) {
this.empname = empname;
In my jsp gave
<html:form method="POST" action="submitForm.do?action=1" >
<html:text property="empname" />
</html:form>
The targets given are correct and it is being redirected.
But the value is not displaying in the textbox while the jsp is loading.
There is a record for the sql query.
Anybody please help me out
It is very urgent
Thank You
Parvathy

Now in the following code, why are u creating a new form?
Why dont you use the form which is input to the Action Class's execute methof?
if(rs.next()){
EditForm e=new EditForm();
e.setEmpname(rs.getString(1));
}Thanks and regards,
Pazhanikanthan. P

BAM reports taking more time while fetching data from EDS

I have created an external Data Source(EDS) in the BAM, and when i create an object with that EDS, it is taking very long to fetch data from the EDS( more than 20 mins.), but as the Database is installed on my local system, when i fire a query there, it don't take much time. Please help me in this, what could be the possible reason?

Your messaging gateway question would be better addressed in the SQL PL/SQL forum
All Places > Database > Oracle Database + Options > SQL and PL/SQL > Discussions

SELECT is taking lot of time to fetch data from cluster table BSET

<Modified the subject line>
Hi experts,
I want to fetch data of some fields from bset table but it is taking a lot of time as the table is cluster table.
Can you please suggest me any other process to fetch data from cluster table. I am using native sql to fetch data.
Regards,
SURYA
Edited by: Suhas Saha on Jun 29, 2011 1:51 PM

Hi Subhas,
As per your suggestion I am now using normal SQL statement to select data from BSET but it is still taking much time.
My SQL statement is :
SELECT BELNR
 GJAHR
 BUZEI
 MWSKZ
 HWBAS
 KSCHL
 KNUMH FROM BSET INTO CORRESPONDING FIELDS OF TABLE IT_BSET
 FOR ALL ENTRIES IN IT_BKPF
 WHERE BELNR = IT_BKPF-BELNR
 AND BUKRS = IT_BKPF-BUKRS.
<Added code tags>
Can you suggest me anymore?
Regards,
SURYA
Edited by: Suhas Saha on Jun 29, 2011 4:16 PM

Select query taking too much time to fetch data from pool table a005

Dear all,
I am using 2 pool table a005 and a006 in my program. I am using select query to fetch data from these table. i.e. example is mentioned below.
select * from a005 into table t_a005 for all entries in it_itab
                   where vkorg in s_vkorg
                   and     matnr in s_matnr
                   and     aplp   in s_aplp
                   and     kmunh = it_itab-kmunh.
here i can't create index also as tables are pool table...If there is any solutions , than please help me for same..
Thanks ,

it would be helpful to know what other fields are in the internal table you are using for the FOR ALL ENTRIES.
In general, you should code the order of your fields in the select in the same order as they appear in the database. If you do not have the top key field, then the entire database is read. If it's large then it's going to take a lot of time. The more key fields from the beginning of the structure that you can supply at faster the retrieval.
Regards,
Brent

How to fetch data from bseg based on 2 internal tables in 1 select query?

hi,
i have bukrs and belnr in one internal table and bukrs and vbeln in another internal table..now if i select from bseg twice using for all entries for fields bukrs vbeln and bukrs belnr twice in 2 select statements its fine..but since bseg is a huge table i want to use select only once..but the problem is that none of the belnrs in the one internal table will have vbeln in another internal table....ie if vbeln is selected from bseg based on belnr in 1 internal table non eof those vbeln will be equal to vbeln on another internal tables..in this scenario even if i take all data from two internal tables into 1 single internal table and then use for all entries on vbeln and belnr of that table ..but i think this will not work because and AND operator will not work because no record will satisfy both vbeln and belnr conditions..even if i use OR operator if the 1st condition satisfies the select clause will not enter into the second clause and all the records will not be fetched...Please help how should i tackle this..

Hi vijaya,
no simple select statement solution so far.
As BSEG is a huge table you should try to get the full key values into another internal table first.
SAP avoids direct selections from BSEG.
Pleas consider the use of one of the secondary index tables first:
      BSAD : Accounting: Secondary Index for Customers (Cleared Items)
      BSAK : Accounting: Secondary Index for Vendors (Cleared Items)
      BSAS : Accounting: Secondary Index for G/L Accounts (Cleared Item
      BSEC : One-Time Account Data Document Segment
      BSEG : Accounting Document Segment
      BSID : Accounting: Secondary Index for Customers
      BSIK : Accounting: Secondary Index for Vendors
      BSIS : Accounting: Secondary Index for G/L Accounts
you may include
      BKPF : Accounting Document Header
for restrictions about time and document type.
The last step is a FOR ALL ENTRIES selection from BSEG providing the full key values.
Although you may have even more selects, the overall performance will be much better.
Regards,
Clemens

Taking time to fetch records from BSEG

Similar Messages

Maybe you are looking for