Taking video without it crossing over to other devices

How can I take video on iphone6 without it crossing over to my other device and using up the storage on my iPad?

You can't delete them without doing so on his iPad.
It's probably happening because you are sharing the same ID for iMessage.  To prevent it, one of you needs to go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID.  (You can continue to share the same ID for iTunes.)

Similar Messages

  • Messages crossing over to other devices.

    Why am I getting messages sent to my sons Ipod on my Iphone?  I installed the upgrade and this is happening.  More importantly, how do I get it to stop.  My daughter is also getting them sent to her Iphone.

    It has everything to do with the account type. This is possible when an Exchange or IMAP account, not with a POP account.

  • How can i get my items to stay in place and not cross over each other when readjusting the browser s

    How can i get my items to stay in place and not cross over each other when readjusting the browser size.
    Basically on my site when i go from a small screen to a big screen everything doesn't adjust to the screen size. I don't know what im missing
    Here's the link to the page all the pages & they all do it
    http://theatricalworkslive.com/
    Thanks in advance

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem.  Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I don't know what's wrong with my Mac but I can't watch Youtube videos. I can watch on other device though. Can someone tell me why the videos are not working? Thank You ^_^

    The Youtube videos is loading slowly on my mac but it loads normally on other device. It always buzzing every single second.

    One of the following steps should help.
    1. Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Web Content:  > "Enable Plug-ins".
           or
        Internet Plug-ins >  "Allow all other plug-ins
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box for
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the boxes next to all items.
        Check the box next to "Remove all website data".
        Click "Reset".
    5. Turn off Extensions if any.
        Safari > Preferences > Extensions
    Best.

  • If I have home sharing can I delete music from my IPad without deleting it from my other devices such as IPhone and IPod?

    If I have Home Sharing enabled, can I delete music from my IPad without deleting it from my IPhone and IPod?

    Home sharing has no effect on deleting music from your iPad. If you delete music on your iPad it will have no effect on your other iDevices.
    You cannot add or delete music with home sharing anyway. You can only share what is on one library on another device.

  • I have an Ipad 4 and its been working fine up until the last week, and now it is very unreliable connecting to the internet and loading pages. It connects to the Wifi network without any problems, all my other devices have no problems at all. Any help?

    I have reset netwrok settings, ip addresses are all fine, restarted my router, but I may be missing something. Anyone else having similar problems?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Video Playback - Need a way to make students watch the entire video without taking away their controls.

    We want to give our students a good viewing experience for our videos so we'd like to give them playback controls. BUT, we need them to watch the entire video without being able to skip ahead. An ideal situation would allow the user to move to any point in the video, just as long as they have already viewed that portion of the video. Make sense? The only option we have to make sure they are watching the video, is to take away their playback controls.
    Ideas?
    Thanks,
    Jesse

    Think about it. How does taking away their ability to NAVIGATE prove the learner actually WATCHED the video?  They could still easily go do something else while the video is playing.  Does this somewhat draconian 'state' of which you speak also mandate that someone is present when the student is forced to watch this entire video to verify their compliance?
    This whole approach is futile.  Get the person to tick a box either at the end of the slide or on the next slide requiring them to verify they DID watch the video in its entirety.  If they choose to lie, it's on their adult head.

  • HT3819 I just bought my kids iPods.  How can we share music from my iTunes library without crossing over with text messages, etc?

    I just bought my 3 kids iPods.  How can we share music from my iTunes library without crossing over with texts, apps, etc? 

    Create new IDs for each by:
    Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    Use that Id only for:
    - Settings>Messages>Send and receive and sign out your ID and sign into the new one. Make sure that only that ID email address is listed.
    - Settings>FaceTime sign out of your ID and sign into the new . Make sure that under You can be reached at only the new ID email address is listed
    - Settings>iCloud and sign out and sign in with the new one
    Continue to the one one common ID for Settings>iTunes and App stores. That is what controls purchases.

  • Hey, i have an iphone 4, and it is upto date, the problem is that my phone does not play any videos online except on facebook, all other videos do not play instead a crossed play sign appears on the video. Please help.

    Hey, i have an iphone 4, and it is upto date, the problem is that my phone does not play any videos online except on facebook, all other videos do not play instead a crossed play sign appears on the video. Please help.

    I watch YouTube videos on a regular basis - mostly with the YouTube app but also with Safari.
    Some YouTube videos are supported to be viewed on a computer only or with a Flash capable device, which is becoming few and far between since Adobe no longer supports Flash on any mobile platform.
    Sometimes I get this video cannot be played on this platform, but rarely.

  • Help please! imac is completely full, FPC wont let me render! I'm a video editor and have over 70 gb worth of videos on the imac which all need to be kept but now beloved imac is full, only had it for 5 months! need external hard drive every 5 months??

    FPC wont let me render! I'm a video editor and have over 70 gb worth of videos on the imac which all need to be kept for various clients/backup/original versons but now beloved imac is full, only had it for 5 months! Will Ineed external hard drive every 5 months?? This can't be I've already resorted to getting rid of unsed applications such as garage band, iTunes,address book ect. I've trashed everything I could. what next ???
    My video files are massive, converting them to a different format doesn't reduce the size of them it just turns them into mp4 or apple pro res ect
    This iMac is for work only so there's no pictures, no music, no conacts, no messenger, no games, nonothing but videos!!

    Have a look at this: http://grandperspectiv.sourceforge.net/
    It will show you exactly what is taking up all of your space.
    You also may want to consider some kind of external storage just for your video projects.

  • Two different projects spliced together over each other some how?

    Greetings everyone,
    I thought forum users might be interested in this one. I don't use the forum often so I don't know the history but has anybody ever had two different projects spliced together over each other some how? For example, I was tweaking a project and left it alone for several months. I came back today to work on it and clips from other projects were in it some how. Also the audio from the new clips were in the new project and overriding the existing project. Does anybody know how to restore the two and make them separate them without losing any info. from either one? The thing's a mess. I had 1 video track w/ some subtitles, a voice over, and some music in the background. Now it has two video clips, and two of everything else. It's crazy. I don't think it's a virus or anything. Nothing else on my machine is acting strange. I hope nobody else has experienced this yet can help.
    Peace

    If you have a backup external drive and Time Machine, I would suggest the following:
    Locate this specific clip in your Finder. Highlight it and rename it "old", or something similar.
    Launch Time Machine.
    Go back to a date in time when this clip was as you properly edited it.
    Again, make sure Finder is still open and highlight the clip.
    Click "restore" in Time Machine.
    Open iMovie and you will see your project as you had it all those months ago.
    This works for me when I have an iMovie project behaving badly.
    iMovie is a great application: but just like us, it has good days and bad days.
    Dan

  • No Hardware Accelerated Video without monochromatic flickering

    I have an ATI Radeon 5700, using fglrx/catalyst driver (weird crashes with FOSS driver, libva problems).
    In both Boxee and XBMC, iI set the hardware accelration option to auto-detect and it settles on VDPAU/VAAPI.
    Videos play, however all videos (not just HD) appear in a flickering monochrome.  If I set it to Basic Rendering, videos play fine, except for HD video which now stutter.
    VLC can play the same videos without any problems.
    So what should I do? Is there an amdcc setting I can manipulate to help with this, or do I just have to wait for for either media center to update their shiznit? I mean boxee barely works in arch (not without an insane amount of tweaking) but I'm fairly surprised XBMC gives me the same nonsense. 
    Thanks for your input!
    XBMC: 10.1-1 (extra)
    Boxee: 0.9.23.15885-3 (AUR)
    Catalyst: 11.2-1
    nomodeset is in grub, overscanning is in affect, and fglrx is loaded on boot.
    Last edited by yochaigal (2011-04-05 05:21:03)

    Adnium wrote:
    Hi,
    I have had a problem with my 17" i7 Macbook Pro for a while now, and have been unable to find any information on it. When attempting to play H.264 videos, I get the following error messages in the Console:
    <snip>
     I should point out that this error appears any time I use an application which uses hardware accelerated video, including Quicktime X, Safari/Webkit, etc. I have searched around for solutions to this problem, but haven't been able to find anything. 
    Using internal/external display makes no difference either.
    So far, I have tried re-installing 10.6.7 using the Combined Updater; repairing disk permissions; using various different browsers; uninstalling Perian; and waving a stick over the Mac. None seem to have solved this issue, and I'm beginning to suspect this is a hardware problem.
    Does anyone know how I can fix this without sending it in to Apple?
    Thanks for your help.
    Ah yes, when you waved the stick over the Mac, you didn't tap three times on the monitor!
    Ok, kidding aside, you did backup your data right? Should do so because the next step is likely a bit risky.
    So you did reinstall OS X fresh, from the installer disks and then updated? Same problem? Right? ok.
    Have you turned off integrated graphics in the Energy savings panel yet? this forces the use of hardware graphics.
    Does it only occur in Safari, iTunes and Chrome?, cause all these are based upon the *cough* (insecure) webkit foundation. Perhaps Apple had to turn off somethings, perhaps that's reporting the errors.
    Alas, if your using Firefox are you having any issues?

  • How can I add photos to a video without interrupting the sound of the original video?

    In PE11, How can I add photos to a video without interrupting the sound of the original video?

    RLHeflin
    Thanks for getting your details posted. Good job.
    You further explained
    I am simply wanting to “overlay” a new visual element without disturbing the underlying audio.
    A classical way to do a Premiere Elements Overlay is to hold down the Ctrl key of the computer main keyboard and drag the new clip over the area of the one you want to replace on the Timeline. That should not do anything but replace one portion of the video on the Timeline. No change in duration video or audio track if you are dealing with video linked to audio.
    If you hold down the Alt key of the computer main keyboard, I am envising a scenario where you want to add to (not replace) some Timeline content.
    A just in case note, if you have video on Video 1 and 2 and the video in 2 does not have transparent areas in it, then all you will see is the Video 2 content. I believe that Hunt eluded to that concept as a possible technique for what you might be doing.
    Another just in case, if you have not seen the following Adobe documentation on arranging clips, you might be interested in the following link
    http://help.adobe.com/en_US/premiereelements/using/WS9B8F8208-EAE8-4b49-A79B-9479B46A8981. html
    Please update us on your progress when you get a chance.
    Thank you.
    ATR

  • Converting .swf to video without losing frames

    This question has been asked and incorrectly answered a number of times already. Specifically, on an Apple computer, it seems that there is no way to get a video file (.mov, .mpg or any other) out of Flash Pro without severe loss of quality or complete destruction of frame rate.
    My .swf files look fantastic, just like they are supposed to. The play at the correct frame rate and all items work as I have set them up. When I go to export it as an .mov or .mpg, the frame rate speeds up and slows down depending on the objects on the screen. I have played with the settings endlessly, knocking the quality down to almost the lowest settings (something I would rather not do after working very hard on my piece) as well as adjusting the frame rate options all over the place to see if anything changed. Nothing. I have read many a forum where Flash creators have the same problems and are tearing their hair out because their work is essentially useless being stuck in Flash.
    I know that there are programs that convert .swf files to video very well, some of them cost about $100. Why buy Flash in the first place if you have to buy another, almost equally priced piece of software just to get your content out of Flash? I also know that there are hundreds of free video converters out there for Apples, none of them seem to be able to handle the .swf format, but can do just about everything else. I further know that for windows, there is the free Iwisoft .swf to video converter that works just fine, but does not handle Apple created .swf files when ported across to a PC. How is it that such software is easy and free on a Windows machine, but not a Mac?
    I would love it if an Adobe rep could answer some of these questions because I have been all over the web looking for answer to which no one seems to have the right one. Most people can suggest a good video converter that works for them, but they haven't tried it on a .swf file and when the original user tries it, it does not work and the thread dies there. Any suggestions?

    @DR. Silky - I reviewed the converter logs at approximately the time you must have tried the conversion.  As you guessed Flabaco was designed for shorter length animations but it can handle longer animations - It just requires more time and server resources.
    I've forced the conversion for your swf file (I assume I got the correct swf) and it should now be converted.
    This conversion required manual intervention but if there are users for such requirements, I'd like to make such conversions possible.
    To download the converted videos, goto www.flash-banner-converter/converter using the same browser you used. As long as the browser cache wasn't cleared  - or - as long as the Start Again button wasn't clicked, you will see the converted videos.
    If you are unable to see the  videos mail me the swf filename and I'll send you a direct link. (use the email address mentioned on the support page as you might not want your content exposed on a public forum)
    The videos are in 3 formats - webm, mp4 and ogv.  The quality of each of these videos might differ and you can choose the one that suits you best.
    Note: The conversion token / serial number was R1328993157691***_*****_****. You'll see this number on the converter page (but not the home page). (If you see a different number it means I've forced the conversion of the wrong swf.)
    Would be glad to help with any more conversions you have - after all its an opportunity for Flabaco to improve and become more useful.
    Kayo.
    Flabaco (Flash Banner Converter).

  • Add video without shift?

    Weird.... I've been using FCPX for months, and after upgrading to 10.0.2, I can't seem to simply place a shot over top of other video without it shifting the entire timeline.
    I have a talking head and want to dissolve to another shot. But when I add the shot (without audio) to the timeline, it shifts the audio as well, so after the shot, the audio is no longer in sync with the talking head. I don't want to use the Connect option because I need to dissolve to the shot, so it has to be in the primary storyline.
    So how do I cover the talking head without shifting the timeline???

    You can dissolve to a clip that's not on the primary storyline. You can also connect the clip and then overwrite it into the primary.
    the add Video only feature is broken
    How are you doing this? Insert will not wipe out what's in the timeline. Are you doing an overwrite from the browser? Don't. It overwrites, video and audio. The video and audio are a single track on the primary unless you detached the audio.

Maybe you are looking for