TakingOver the amounts in AS91

Hi All,
creating an asset by AS91, choosing the "takeover values:
- when I fill in the amount of the "***.acquis.val." for the 01 depreciation area (field ANBTR01),
SAP repetes it for the other depreciation areas (fields ANBTR02 and ANBTR03) ;
- instead, when I fill in the amount of the "Accm.ord.deprec." for the 01 depreciation area this fiiling isn't repeated for the others depreciation areas.
Is there a way to obtain the repetition of the amounts for the "Accm.ord.deprec." too?
Thanks
Gandalf

The reason for this is that, the APC value in all the areas are ususlly same but depreciation will be different because each area has its own depreciation terms(keys). If you want depreciation to be same in other areas, do the setting in transaction OABD. Choose the area you want the depreciation to copy from and tick the identical check mark.

Similar Messages

T.code AS91: takingover the values of "Accm.ord.deprec." ...

Hi All,
creating an asset by AS91, choosing the button "takeover values:
- when I fill in the amount of the "***.acquis.val." for the 01 depreciation area (field ANBTR01),
SAP repetes it for the other areas (fields ANBTR02 and ANBTR03) ;
- instead, when I fill in the amount of the "Accm.ord.deprec." for the 01 depreciation area this fiiling isn't repeated for the others depreciation areas.
Is there a way to obtain the repetition of the amounts for the "Accm.ord.deprec." too?
Thanks
Gandalf

Check you configuration. You describe the rule for takeover of APC and Depreciation values in Asset accounting configuration.
IMG path: Asset Accounting>Valuation>Depreciation Areas-->Specify Transfer of APC Values & Specify Transfer of Depreciation Terms
It seems there are rules for the APC values, but not for the Depreciation terms.
Try this setting out. It might work, although I am not sure whether the system will do that during the Legacy upload transaction.
Regards,
Vishal.

What deterimes the amount of data in a waveform from a TDS 1012 scope

Hello,
   What determines the amount of data that is in a waveform that comes out of a TDS 1012 scope? I am assuming that I will have to look at the driver vi to determine the commands sent to the scope to figure it out. I am in a situation that I need to have the y axis to have a high resolution, that results in very little data being collected from the scope.
Regards,
Kaspar
Regards,
Kaspar

Hello,
    The amount of data that comes out of the TDS 1012 scope is determined by the data start (DATaTARt)  and data stop (DATaTOP)  commands that are defined on page 58 (2-38) in the 346 page programming manual for the scope. I found of that the data start was not set to 1, which is the beginning of the data.
    I also had a very low level signal on channel that was all most unreadable by the scope that caused me to think that I was not getting all of the data.
Regards,
Kaspar
Regards,
Kaspar

Does the amount of VRAM matter for AP3 when considering the graphics options in the new iMacs?

The graphics options go from 512MB to 2GB. The cards themselves (6750, etc) are very capable, but does the amount of VRAM matter? Will 512MB be sufficient for AP3 or should I go for the 2GB of graphics RAM? Why or why not? Thanks.

Well Aperture is one of the few programs in the world that will havely rely on the GPU. 512 MB should be suffiecient (*), but more will bring more speed to Aperture.
*: At least it is in my machine, though using brushes extensively will slow things down quite a bit.

My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

The amount of storage that is shown on the box and in Settings are calculated differently - the package uses 1 billion bytes as a gig (i.e. decimal), whereas in Settings it's shown as the binary definition : http://support.apple.com/kb/TS2419
Also some space has been used for iOS, the built-in app and some space is lost due to formatting.

I get double the amount od gmail notifications in notification -- both from new mail and all mail. What can I do?

I get double the amount of gmail notifications on my iPhone 4 or iPad 2 using iOS 5. Any ideas how to fix?

I Think that you have system sounds muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Why does the Amount slider on the Detail Panel reset to 0 when saving the file as a Smart Object?

Whenever I open a Smart Object PSD file to adjust previous settings in RAW, I have noticed that the Amount slider in the Detail panel has reset to 0. Does this reduce the files sharpening? Is this a normal behavior? Can this be prevented?
I use a Mac running 10.6.8 and Photoshop CS6, version 13.0.5 x 64.

This behavior happens only on Mac desktop computer, not on my Mac laptop running the same CS6.
After I've edited an ACR file (including sharpening in the Detail panel), I change the file into a PSD Smart Object to complete my edit by clicking on "Open Object". I immediately notice this PSD file is not sharp. If I click on the bottom right of the image icon to return to the RAW file, I find the Amount slider in the Detail Panel has changed from the sharpening amount I gave it, to 0.
If I do the exact same thing on my laptop (running a duplicate of the same Photoshop CS6), this behaviour does not happen. The image remains sharp as a PSD file, and if I check by returning to ACR, the Amount slider has maintained its setting.
Anything more you need?

I redeemed a gift card, the amount shows up in the top right corner but when I try to purchase music it goes to the account that I have loaded. How do I use the gift card?

I redeemed a gift card, the amount shows up in the top right corner of my account but when I try to purchase music it goes to the account that I have loaded previously. How do I use the gift card?

If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account.

I tried to purchase music at iTunes with the iTunes card I was given. I was able to redeem the amount and it shows on my apple Id I have $25 but it does not pay my purchase it will still go to my credit card and bill it. It did not give an option.

I tried to purchase music at iTunes with the iTunes card I was given. I was able to redeem the amount and it shows on my apple Id I have $25 but it does not pay my purchase it will still go to my credit card and bill it. It did not give an option.

If you were instructed to call them, then that's what you should do. They will probably need to verify your identity before helping you with the security question.

I have just over 100gig of music in my iTunes library plus what ever else I add in the future. Because of the amount I had to save my music library on an external drive as my laptop did not have the memory to hold it all. I want to back up my iTunes libra

I have just over 100gig of music in my iTunes library plus what ever else I add in the future. Because of the amount I had to save my music library on an external drive as my laptop did not have the memory to hold it all. I want to back up my iTunes library and save it on a different external drive, one I store all my back ups on. Is this possible? If so how can I do it?

To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them.

When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

The only limit is that of the device. No restrictions on how much of it you can use for music. Is part of your music library unchecked?
tt2

How can I reduce the amount of storage a shared photo stream is taking on one of my devices

I have over 8000 photos on the Cloud in various shared photostreams. They all appear on all my devices which is great. The devices show the photos using about 1GB of memory unless I plug into iTunes when it reveals they are in fact using circa 15GB!! This is ok on the devices with large memory capacity but one of my 'phones is only 16GB in total and is now full.
If I try to delete a photostream on this phone it threatens to delete the photostream on all my devices.
It would appear that my cloud storage for photostream is limited by the device with the least memory.
Any ideas on solutions gratefully received. Buy a new phone with more memory or delete some of the photostreams are the sub optimal ideas I have at present.
Also why is the usage understated on the devices and only revealed when I plug in to iTunes?
Many Thanks
D

I'm not sure there is a solution to your question, other than to not keep so many photos on your devices. If you delete a photo from photo stream, it will delete it from all your devices. To keep them, first save them to your camera roll (tap Edit, tap the photos, tap Share, tap Save to Camera Roll), then import them to your computer as explained here: http://support.apple.com/kb/HT4083. However, given the number of photos you have, a much more practical solution would be to transfer them to your computer using an app like PhotoSync, which will select them all at once and transfer them over wifi.
I'm not sure why you're seeing such a discrepancy in the amount of space taken up by your photos. It's possible that something is corrupt given the large number of photos on your device.

Can I change the amount of minutes on a single line plan?

I currently have unlimited minutes on a single line plan, but I hardly use my phone to make calls. I'm trying to lower my bill by reducing the number of minutes I have but I don't see an option to change my minutes in my account. It just gives me an option to change the amount of data I have.

I'm not sure if that's 100% accurate. I still have an old Nationwide min plan and when I log on to My Verizon I can still upgrade or downgrade my mins plan with one of the old Nationwide plans. Unless I'm misunderstanding the topic...

Is there any way to increase the amount of space for all day events?

I have iCal on my ipad and my phone, and when I look at the daily view or weekly view, only 1 1/2 lines are shown. If I have a few events that are all day (I keep several calendars) then I have to scroll through them one at a time. And with my fingers, sometimes they go by too fast. Does anyone know how to increase the amount of space? I am using an iPad3, and an iPhone 5, both with ios 7.
Thank you!

With Mac OS X, there is no way for you to alter the amount of real memory a program is allocated. This is all done dynamically by the OS. OS X's virtual memory management is far better than 'ole OS 9's.
What are saying about a memory leak? I take it that Safari is continually using more and more memory. How much memory is it usually taking up after a few hours? Perhaps you should just quit and restart Safari every few hours before it begins failing to respond.

I activated an iTunes gift card, my iPod showed the amount available ($15) and after downloading 2 songs all I had left was $.04. Any ideas on what happened to my funds or how I can find out where the rest of the money went?

I activated an iTunes gift card, my iPod showed the amount available ($15) then after downloading 2 songs my balance was $.04. Any ideas on what happened to the rest of my funds or how I can find out where the rest of my money went?

- Have youwent to yur iTunes account looked at your puchase history for purchases thant y might have forgotton?
- Maybe you had an unpaid balance before redeeming the card.
- Contact iTunes
Apple - Support - iTunes - Contact Us

TakingOver the amounts in AS91

Similar Messages

Maybe you are looking for