Talent Assessment - 4 point and yes/no scale

Hi All,
We are implementing Talent Assessment on EHP4 and facing a problem with scales.
We have a 4 point customer scale for Competency Assessment and have set up all the necessary configuration. However on the assessment form the threshold slider does not appear.
We are exeprincing the same problem on Derailers where we are uisng a yes/no scale. We initially created a customer scale but also used the standard yes/no scale however the Threshold slider still does not appear.
We have seen in table V_T77TMC_SCA_MAP that the 'Type' has 3 point, 5 point etc. Please can anyone tell us if a 4 point scale can be used and also maybe why the yes/no scale is not working.
Thanks

Hi
Is there any specific reason SAP does not allow for a 4 point scale?
The Yes/No scale is listed in the scales assigment table  with type Yes/No. In fact we even used the standard Yes/No scale and the threshold bar still does not appear.
Thanks for all the input Luke & Hong
Regards
Imraan

Similar Messages

  • Delegation process in talent assessment processes

    Dear Gurus,
    Can we perform delegation for talent assessment processes?
    for example: the line manager position is vacant or the line manager is on leave.
    Is it possible to perform talent assessment based on that example?
    If it yes, is there any configuration needs to be done? or is there any work around that you use while implementing the talent management project?
    thank you very much
    Regards,
    Bobbi

    Hi Baskar,
    sorry it took me so long to reply your message.
    these are my opinion regarding to your queries:
    if you use a predefined performance management, you have to use the standard one B904 relationship. but you need to add a customer defined OM relationship via SPRO and also, you need to maintain those relationship in PP01 each time you want to perform delegation in performance management (you can use LSMW if you have to perform mass data maintenance in PP01) and since, we use a standard SAP functionality I don't we will encounter any issue related to this matter and if you encountered an issue you can raise an OSS message and let SAP solve your problem . A mass changes custom program would be nice but you have to consider how much effort you have to put on requirement gathering, testing, and maintenance.
    however, if you use flexible performance management, i think it would be nice if you create a custom program to change the appraiser, because it would be painful if you change the appraiser manually (meaning: one by one) in HRTMC_ADMIN or maybe you can use LSMW and upload the changes using a text file.
    at the end,
    it depends on your project, whether your project have the budget to make a custom program or minimum budget which means you have to use all SAP standard functionality
    Hope this will help you.
    Regards,
    Bobbi

  • Is there a way to change the color of the Bezier Curves and points to a different color other than black  I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent

    Is there a way to change the color of the Bezier Curves and points to a different color other than black  I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent backgrounds. Any thoughts?

    Yes. Well, sort of: instead of a "path", set the pen tool to "shape" in the tool properties. Then set the fill colour to transparent, and the stroke colour to the colour you want. You can also set the stroke width.
    Not perfect, but at least you can see the path more clearly - the anchor points and handles still remain the default colour. Open the path panel, and right-mouse click the path shape to create a selection based on that shape. The Paths panel menu also allows you to create work paths based on that shape.
    Unfortunately when you try to move the handles the black thin outline appears again until you release the mouse button.
    This is one of several things that works better in Photoline: in Photoline, once the path is set to a specific colour, editing the path uses the actual colour and stroke width. which is extremely handy for creating path based selection with awkward background colours and/or a high resolution screen. In Photoline the handles and bezier points are also much, much larger, which makes it rather simpler to work with as well - especially on a higher resolution screen. And when selected the handles and points are a clear red with a black outline - again easier to spot and identify. I just works better, in my opinion.

  • Shipping point and storage location determination

    for one of my delivery type i had defined shipping point determination as per following.
    define shipping conditions
    define loading group
    assign shipping points: with combination of shipping conditionsloading groupplantprop shippping pointmanual shiping point.
    i also checked the cmr and mmr both are correct.still system is not proposing shipping point and storage locatgion in my obd

    Hi Charan
    Shipping conditions is taken from sold to party
    Pls check whether you are using a different SP and SH
    Check in these t codes
    In OVL2 are you seeing the shipping pt determination for your combination?
    In OVL3 are you seeing the storage location determination for your combination?
    If yes then shipping pt will be definately picked up in sales order
    Storage location will be definately picked up in the delivery if you have assigned the rule MALA in OVLK
    Have you assigned your delivering plant to your shipping pt in enterprise structure assignment?
    This also check
    Refresh the whole order and try again
    If need be log out of SAP and relog and see provided you have youR OVL2 and OVL3 correct?
    Note If shipping conditions are assigned to your order type in VOV8 then that will have priority over the shipping conditions of SP
    So for that combination you should maintain shipping pt in OVL2
    Regards
    Raja

  • Transaction Codes: Talent Profile, Talent Assessment, Talent Review Meeting

    Hi experts,
    When a user accesses the Talent profile, Talent Assessment and Talent Review Meeting on the Portal does SAP call specific transactions on the backend.
    I would like to find out what are the transaction codes being called(if any) to restrict access to the Talent Profile, Talent Assessment, and Talent Review meeting. I have checked the SAP standard roles for Talent Management to
    get an idea however, P_TCODE= All Transactions.
    Thanks

    >
    Luke Marson wrote:
    > HI Francesco,
    >
    > A number of BAPIs are used in the portal and in STVN SuccessionPlanning. Go to SE37 and check out all of the HRTMC_* functions available (as per Michael's suggestion for SE93). You will see functions to read and write back various data. You might be able to re-write the apps or your own apps, but I'm not sure on the feasability of this.
    >
    > I expect Michael can have further input.
    >
    > Best regards,
    >
    > Luke
    Hi Francesco -
    So Luke is more a technical guy than me, and he already gave some great input.  Here are my thoughts. 
    I think an initial assessment would be that this is a challenging effort.  There are number of BAPIs that could be potentially be used utilized.  However, much of the entire Talent Management space recently developed by SAP was written with ABAP Objects using class / methods.  Exposing these as web services to be used by XI or wrapping the functionality of the class / methods into a custom RFC would require some effort.  
    The link below shows some pro's and con's on ABAP objects. 
    http://help.sap.com/saphelp_nw73/helpdata/en/60/8c94422533c46ae10000000a155106/frameset.htm
    This paragraph really touches on what you would need to do: 
    Classic access through RFC is only possible using function modules. You can generate server-side proxies for ABAP classes using XI and thus provide existing functions as external services in classes. However, function modules are still a better choice in comparison in order to make the functions accessible as a Web service or using RFC.
    So to really know the scope of what you are trying to do, we would need some more specifics.  Are you just wanting to retreive some SAP data and display it on variouis .net screens.  Are you actually trying to execute a process, like succession planning, in a .net application?
    Hope this helps.
    Thanks Mike
    Edited by: Michael L Pappis on Mar 28, 2011 8:11 PM

  • Talent Assessment form - what table is the data stored in?

    Hi All,
    I am just wondering what SAP data table is used to store the data from the Talent Assessment form?
    Kind regards,
    Luke

    Hey Luke:
    So for Potential - HRP7408-POTENTIAL.  SAP came up with a very nice and easy way to find the performance and potential values, which is great.
    For Risk of Loss, that's not really stored in the same way.  I wish I could tell you this would be easy, but it's not.  For the output on the Talent Profile screens, SAP simplifies it for configurators and lets them choose a value called SAP_RISK.  If you want to go get a person's risk assessment (or impact of loss... or whatever Assessment attribute other than potential you want) other than this, you'd do it the same way as SAP does it for SAP_RISK
    They start by looking at the table t77tmcaesfield.  This is the set of fields you maintain in the IMG step - "Adjust Data Retrieval for Appraisals, Evaluations, and Surveys".  This is where you say template (VA) and criteria group (VB) is where the risk value is stored in.
    You can find the source code for this in BAdI BADI_HRTMC_DR_FIELDS -> Enhancement Implementation HRTMC_IM_DR_FIELDS_AES -> Method IF_HRTMC_DR_FIELDS~GET_FIELD_INFOS
    Then in the same path, Method IF_HRTMC_DR_FIELDS~GET_FIELD_VALUES details how they get the values.  Basically they call Class cl_hrtmc_cp_basic_utilities and Method get_aes_field_value_fapp.
    If you look at that Method, it has all of the ugly details about getting the appraisal document ID for a person, then using what you already have to grab the value of the correct data element.
    Hopefully that helps you, sorry it's not more straightforward.  Holler if you have any questions.
    Thanks,
    Chris

  • Talent Assessment - Development Plan

    Hi Guys,
    We set up the wohle talent assessment, but we cannot see any "Create, change or display" link on the Development Plan tab.
    Any help?
    Regards
    Edited by: Henning van Wyk on Oct 21, 2009 8:34 AM

    >
    Ranjit Kumar wrote:
    > Hi,
    >
    > I have created development plan in Talent Management. But its showing error while consistency check that "You Do Not Have Authorization".
    >
    > I have 4 Talent Management roles assigned to this user id. So let me know where is the issue.
    >
    > Awaiting for valuable reply.
    > RK
    Hi Ranjit:
    Creating Development Plan templates in EHP4 should be done through the IMG step: Talent Management & Talent Development -> Talent Assessment -> Define Forms For Talent Assessment
    Once you create the form there and select "End Configuration" the appraisal template and it's subcomponents will automatically be set to "released" (HRP****-ISTAT = 4).  However, if you attempt to go into HRTMC_CATALOG_TMC, unrelease the template, modify it, then attempt to re-relase it, you will not be successful.
    The easiest answer would be.. create a new template using the IMG step I listed above.  If you don't like that, in a very indirect way, you can release the template again by updating the ISTAT field of the various V* objects you have created.  However, you're sure to have mixed results with this approach (I have lived this 1st hand).
    Further, if you attempt to modify the template directly in HRTMC_CATALOG_TMC, that is only one half of the process.  For instance, I wished to make the development plan printable.  Since it's the same basic technology as performance appraisals, it seemed completely logical.  There is a print layout option for the appraisal template, which for the development plan was blank.  I tried to set the value to something and then in my very indirect way, was able to release the template with the change in place.  Success (or so I thought)!  The frontend Web Dynpro functionality (and Flash Island) basically will not accomodate whatever modifications you've made. So basically, the Talent Assessment configuration is meant to be done through the IMG step above and that's prettymuch your only option.  Sorry I don't have better news.
    Let me know if you have any questions.
    Thanks,
    Chris
    Anyway

  • MTP - Media Termination Point and SBC - Session Border Controller

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";}
    A client of mine wants to build up a MTP - Media Termination Point and SBC - Session Border Controller to use it to connect to the internet or leased lines to their VoIP provider at USA and route the calls into their current IPCC and also use it with their auto dialer to outbound the international calls.
    I NEED TO KNOW WHAT ARE THE REQUIREMENTS FOR THIS REQUEST AND HOW CAN IT BE IMPLEMENTED??!!

    try this for SBC in XR12000.
    http://www.cisco.com/application/pdf/en/us/guest/products/ps6342/c1244/cdccont_0900aecd80391b66.pdf

  • Cropping at same size and with aligned images (and/or at scale)

    hi all. i am hoping for a little help as i tune up my photoshop usage.
    i am finding that i sometimes have a need to crop a couple of images from something like an architectural line drawing. this means that i have lines in this drawing and i am oftentimes in need - for instance if i have copied two floor plan with one above the other - of having these images sit in a frame that is the SAME SIZE.
    i am also in the need of cropping so that the resulting images are ALIGNED - with for instance one line in one image at the same spot at the bottom and to the left with the same amount of bleed area around the image both at this point and at all other points.
    is there a way to crop an image in two different spots at the SAME SIZE?
    is there a way to crop a "sloppy" copy of two sets of images so that the canvas is the same size but the resulting set of images are aligned in the manner described above?
    ALSO, is there some way for me to SCALE a set of images in Photoshop?
    thanks in advance for any links, advice, expertise etcetera.
    - jon

    hi jjm.
    i think i threw something in that should have been separated into antother posting. i am not so concerned about the scaling question.
    i am more concerned about being able to get two separate sets of images - with for instance a line drawing - out of another drawing so that i have two images that when placed in a document will have the same size and the same amount of bleed area in white around it.
    i guess in thinking about this - that i would just copy and paste each image to a new document, CROP as close to the image as possible and then ENLARGE THE CANVAS SIZE to whatever size i wanted. this would then meant that the image had almost the same placement in the canvas since i CROPPED the two images as close as possible and then enlarged to suit.
    but this seems like it only would work for images with white backgrounds or single color backgrounds in a way somehow.
    i mean, is there a way to place a COPY box on a very large image with a set of other images in it and Copy two sets of images to new documents so that they are the same size? or i mean a more accurate way to COPY information out of a document? what about making sure that an image is placed correctly in a CANVAS?
    it seems like i would be asking for a tool that would let me select a point on the image and to tell photoshop to give me this image (or each image in this case) a CANVAS of some size or a CANVAS with some BORDER /around/ the rest of the image of some measurement.
    is there anything like this? something more accurate for copying information so that i can repeat the copy and something more accurate for CUT or Canvas so that i can place an image in the final file more accurately?
    i always sort of wing it with this and have to do Canvas sizes freehand or CUT the image close and then enlarge the canvas and this seems rather imprecise...
    THANKS

  • How do you swap an image in the timeline but keep the in/out points and opacity settings?

    Hi There,
    We have a file which consists of a bunch of still images that get updated each year - the edits never change.
    Is there an edit type that will allow us to swap the images our for new ones but keep the in/lout points and opacity changes? We've looked at all the edit types (overwrite, insert etc) but they don't seem to swap stuff out.
    We had also been naming the new files the same as the old ones and reconnecting the media but this is now causing issues.
    Any help or pointers in the right direction would be much appreciated.
    Cheers
    Ben

    Click on the new image in the browser, so that it is selected, and the type Command + C to copy it.
    Next, click on the clip in the timeline that you want to replace with the image you just copied (preserving your in and out points and opacity settings) and type Option + V to bring up the Paste Attributes Dialog Box.
    In the Paste Attributes Dialog box, check the box for Contents and leave the remainder of options unchecked.
    Uncheck the Scale Attribute Times option as well.
    Click OK, and the image should now be replaced on the timeline with the in/out and opacity changes preserved.
    MtD

  • Control handles or points and warping text

    The transform controls in Photoshop CS6 disappear as soon as I click on the warp mode icon, preventing me from manually warping the layer on which I am working. Oh sure, I can click on Show Transform Controls and, voila, there they are. But as soon as I click on the icon that switches me between warp and free transform, the handles disappear (no mesh either) and without them there is no way to manually warp text or images. Because this used to work perfectly in CS5, I am just a tad frustrated. None of the prebuilt warp modes involve perspective (although I understand this option is maybe, perhaps, it's possible, coming at some point in the future) I can't even get the look I'm after with any prebuilt mode.
    3D doesn't offer a simple perspective tool either. Yes, it does a lot, but not what I want.
    So, why do the handles disappear and how can I get them to stick when I need them?
    And, yes, I do have View > Extras active. Or at least the option is checked as active.
    Thank you for any help.

    PECourtejoie, That was a lot of text! I did not include most of it, but I did include anything related to the video card. I hope I included what you need. If not, I can copy the whole shebang. Thank you for all your help.
    Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
    Operating System: Windows 8 64-bit
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 4
    Processor speed: 3293 MHz
    Built-in memory: 8045 MB
    Free memory: 4931 MB
    Memory available to Photoshop: 7046 MB
    Memory used by Photoshop: 60 %
    Image tile size: 1024K
    Image cache levels: 4
    The GPU Sniffer crashed on 2/6/2013 at 3:19:27 PM
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenCL Version: 1.1 CUDA 4.2.1
    OpenGL Version: 3.0
    Video Rect Texture Size: 16384
    OpenGL Memory: 1024 MB
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce GTX 650 Ti/PCIe/SSE2
    Display: 2
    Display Bounds: top=-30, left=1680, bottom=1020, right=3360
    Display: 1
    Display Bounds: top=0, left=0, bottom=1050, right=1680
    Video Card Number: 2
    Video Card: NVIDIA GeForce GTX 650 Ti
    Driver Version: 9.18.13.1106
    Driver Date: 20130118000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode: 1680 x 1050 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTX 650 Ti
    Video Card Memory: 1024 MB
    Video Card Number: 1
    Video Card: Intel(R) HD Graphics 3000
    Driver Version: 9.17.10.2932
    Driver Date: 20121212000000.000000-000
    Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32
    Video Mode:
    Video Card Caption: Intel(R) HD Graphics 3000
    Video Card Memory: 2172 MB
    Serial number: 90970570205633490069
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\Sheryl\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      C:\, 1.82T, 1.74T free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set

  • Tweaking a script to complete transform and also add scale variables

    Hello,
    I am trying pick up bit and pieces on how to script photoshop. For the most part I can do what I need by mixing it with applescript. My current issue is taking a layer, setting the anchor point to set specific location (see below), scale it and complete the task with no user interaction. I found the below script which which will let me pass variables to set the anchor points (sweet). Now I am wondering if anyone can help me figure out how to add two more variable for the scaling. Since I am passing variable I don't need user interaction which this current script seem to want.
    Part one: Set Anchor points — Done
    Part two: Scale layer — Not sure
    Part Three: Turn off user interaction — I am think I just need to change line 15 "DialogModes.ALL" > "DialogModes.NO"  Can anyone confirm?
    Any help would make my life a lot easier. I have to scale an image 10,000 times and this is the only thing holding me up.
    function transform( x, y) {// anchor position as pixels 
        var desc = new ActionDescriptor(); 
            var ref = new ActionReference(); 
            ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') ); 
        desc.putReference( charIDToTypeID('null'), ref ); 
        desc.putEnumerated( charIDToTypeID('FTcs'), charIDToTypeID('QCSt'), charIDToTypeID('Qcsi') ); 
            var desc7 = new ActionDescriptor(); 
            desc7.putUnitDouble( charIDToTypeID('Hrzn'), charIDToTypeID('#Rlt'), x ); 
            desc7.putUnitDouble( charIDToTypeID('Vrtc'), charIDToTypeID('#Rlt'), y ); 
        desc.putObject( charIDToTypeID('Pstn'), charIDToTypeID('Pnt '), desc7 ); 
        desc.putUnitDouble( charIDToTypeID('Wdth'), charIDToTypeID('#Prc'), 100 ); 
        desc.putUnitDouble( charIDToTypeID('Hght'), charIDToTypeID('#Prc'), 100 ); 
        desc.putBoolean( charIDToTypeID('Lnkd'), true ); 
        desc.putEnumerated( charIDToTypeID('Intr'), charIDToTypeID('Intp'), charIDToTypeID('Bcbc') ); 
        executeAction( charIDToTypeID('Trnf'), desc, DialogModes.ALL ); 
    transform( 584, 330) //looking for add variables for the x, y scale box

    To change the scaling add two more arguments to the function and use those in the lines instead on the "100"s
        desc.putUnitDouble( charIDToTypeID('Wdth'), charIDToTypeID('#Prc'), 100 );   
        desc.putUnitDouble( charIDToTypeID('Hght'), charIDToTypeID('#Prc'), 100 );
    Part Three: Turn off user interaction — I am think I just need to change line 15 "DialogModes.ALL" > "DialogModes.NO"  Can anyone confirm?
    Simply testing that for yourself should hardly take more than a couple of minutes.

  • NO_APPER_CHECK parameter on Talent Assessment

    Hi Gurus,
    Anybody knows what is NO_APPER_CHECK parameter on Talent Assessment for?
    IMG > Talent Management and Talent Development > Talent Assessment > Make Further Settings for Talent Assessment
    Thanks for your help
    Regards,
    Luciana

    Hi Luciana,
    the idea comes from PM. You will find the Checkbox 'No Authorization Check for Appraiser' on the Proccessing tab in PHAP_CATALOG (Including F1 help)..
    It's similar for devplans. If you set the parameter NO_APPER_CHECK to 'X', the checks for the appraiser are suppressed. This allows a manager e.g. to display a devplan for an employee that moved to his/her organization after the devplan was created.
    The parameter was introduced with note 1613960.
    Regards,
    Richard

  • SCCM - Branch Distribution point and Management point on the same server

    Hi All,
    Would like to know if any other SCCM roles like management point , distribution can be installed on the same server on which a branch distribution point is installed?
    Rgs,

    Hi,
    Branch Distribution Points no longer exist in Configuration Manager 2012 and above.
    I'm assuming you want to install additional roles on an existing server that is currently only acting as a Distribution Point and the answer is yes, this is possible, but it depends on which other roles you want to install and there will probably be some
    prerequisites needed.
    Can you elaborate on which roles you are considering installing? 
    Steven Hodson | http://www.stevenhodson.com | @_hodders

  • Multiple Cisco Aironet 1131AG access points and same SSID?

    We have multiple Cisco Aironet 1131AG devices, all wired on one Cisco L2 switch(2560)  who is connected to L3 switch (3550). We assigned one VLAN for access point in L3 switch who acts as vtp server (L2 switch is vtp client). All ap's will have static ip address and all will have same SSID and no security and they will be using multiple channels (ex. 1,6,11).  They will operate in 3 floor building for roaming wireless client. We won't using any wireless controller.
    So my question is this: How to configure APs-all the same with different ip's, can we use L3 switch to create dhcp server for access points VLAN (pool for clients, and the rest for static ip for ap's)? Can one of the ap's be WDS and in the same time local radius server with users without Cisco Secure ACS or similar controller or I didn't understand this quite well :-). I followed guide http://www.cisco.com/en/US/docs/wireless/access_point/12.3_2_JA/configuration/guide/s32roamg.html for WDS where the part abou Cisco ACS is a problem, so I can use same ap as Local Authenticator as in guide  http://www.cisco.com/en/US/docs/wireless/access_point/12.3_4_JA/configuration/guide/s34local.html#wp1035723.
    Many thanks...

    Well, just so you know, WDS and local RADIUS authentication is only needed if you're using authentication on your wireless connection.  You say you're not planning to use security, so this isn't necessary.  However, I'd highly recommend at least using a simple WPA2-PSK to lock down your connection, otherwise you might end up giving free Internet access at best, and at worst you might be giving access to company PCs and servers.  If you want to further use an 802.1x or WPA authentication method, then yes, you can use an AP as a RADIUS server and WDS to improve authenticated roaming, but this is far more limited than using a Cisco ACS.
    As for your other questions, yes, your APs can all be configured the same except for at least three parameters: IP address, channel, and hostname.  Configure your static IP addresses on the AP's BVI1 interface.  Don't place it on the Radio or Ethernet interfaces, because if either of these interfaces goes down you'll lose the ability to configure the AP, so it's best to use the BVI1 interface.
    And yes, configuring a DHCP scope for your clients on your L3 switch is a good design, or you could also use your DHCP server on a different subnet by using the ip helper-address command on the L3 interface.  I hope this helps!  Let me know if you need help configuring any of this.
    Merry Christmas!
    Jeff

Maybe you are looking for