Talent Management error when requesting feedback

Hi
When clicking on the Request Feedback button, the following error is generated:
oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-20002: 3133: Activity instance 'HR_PARTICIPANTS_BLOCK' is not a notified activity for item 'HRSSA/213075'.
ORA-06512: at "APPS.WF_ENGINE", line 5666
ORA-06512: at line 1
The intention is to invite a 3rd party participant to review the employee. Any assistance with this error will sincerely by appreciated.
Thanks

Pl see if MOS Doc 268111.1 (Add Absence Request in SSHR Errors with NullPointerException Ora-20002) can help - this doc describes a similar error in another HR workflow.
HTH
Srini

Similar Messages

  • Error when requesting JSP page

    We have just finished getting our environment set up. We are running
    WebLogic 4.5.1 sp7 on a Sun server, and are frontending it with IIS 4.0
    SP6a using the iisproxy.dll WebLogic plugin.
    We can get things working for a while, but eventually, we get the
    following error in the NT event log when requesting the first JSP on our
    site:
    "Out of process application '/LM/W3SVC/1/Root' terminated unexpectedly"
    The Web server is still up, it's just when the JSP page is called that
    we get "Page can not be displayed" errors. Any HTML pages come up just
    fine. To fix the problem, we just stop and restart the Web Publishing
    service.
    Has anyone seen this error or does anyone know what events cause this
    problem?
    Thanks,
    -Mike

    There is a big difference between this;
    http://www.mydomain.com/blabla
    and this;
    http://www.mydomain.com/blah.jsp
    blabla - this is the name of the Web application. When you reference this Web application name Tomcat will check the welcom file descriptor and redirect for that web application.
    blah.jsp - is the name of a JSP page. When you reference this page the way you did above, you are not stating where the JSP page is located. It would be locatied in the "http://www.mydomain.com/blabla/blah.jsp" location.

  • Internal manager error when updating

    We recently updated to the latest iTunes (with a lot of difficulty). My mums and my boyfriends iPods are now working fine when connected to the computer. When I plug my iPod in it's not recognised in iTunes. I ran the updater 2005-06-26 but the updater won't run. It comes up 'iPod manager internal error' and then disappears. Please help!!!
    I've got my iPod on manually manage so I'm worried that I'll lose all my songs if I reset it.

    Nicole,
    Try this.
    Updater for Windows: "Internal manager error" occurs when restoring or updating iPod
    Resetting the iPod does not erase it's contents. Should you need to restore the iPod however, then that will.

  • Activity management - error when displaying attached files

    Hi Gurus
    we are using CRM 7.0 with the Web user interface. one on my users is getting an error when trying to display a saved attachment in an Activity.
    the error says" No dument display because of missing customising for HTTP service '/default_host/sap/bc/content
    i tried searching on spro to look for customising because on development its working fine, only the Live system is giving an error
    pls help me with the path and also how to fix this error.
    Thank you in advance

    Hi Admire,
    I had the same problem in our development system and used the tips provided in notes 606745 and 685521 to solve this problem.
    Hopes this helps.
    Regards,
    Alex van Vondelen

  • Yard management:: error when scheduling a vehicle TSTR_SHIFTS_LOG_NO_BREAKS

    Hi,
    When trying to schedule a vehicle in yard management I get the error message : Generation error in TSTR_SHIFTS_LOG_NO_BREAKS
    Message no. T9506
    Diagnosis
    An error has occurred in the generation program for the time stream
    Does anyone know what causes this error?
    Thanks a lot,
    Joris

    Hi Joris,
    The factory calendar is passed from the ERP to the APO system during
    ATP check.
    In your system, please do the following:Goto SPRO transaction.
    Goto the menu: General settings->Maintain calendar.
    Open the calendar '01' for example. Here you can see that the calendar is maintained
    until 2010 only. Can you pelase extend this calendar into the future
    and the error will not occur.
    Hope this helps
    Ramana

  • Adobe Application Manager error when opening CS6

    I downloaded and installed CS6 beta.
    When I open CS6, I get  this error:   Adobe Applicatin Manager required to verify your license is missing or damaged.  Please download a new copy ...
    I downloaded the new copy but when I open CS6, I get the same error.
    Now what?

    Hi pjjkt
    I'll forward this to the install gurus to see what they can figure out.
    Pattie

  • Import manager error, when using Standard maps

    Hi,
    I am trying to import data using Import manager statndard Maps.
    For certain maps I am getting the following error message.
    <b>"Unable to retrieve unique values for field 'Key <Clone>'."</b>
    And also after getting this error if I close the current statndard map and open another standard map, import manager crashes.
    I am using MDM Version 5.5 SP2(5.5.24.04).
    Thanks
    Subbu

    Hi Subbu,
    I encountered this issue around inability around unique values for cloned fields too, although in custom maps, not standard ones.
    1.  When reported, this was fixed in 5.5.24.05.  So, try usin 5.5.24.06 and see if you still face it.
    2. The other option or workaround to be precise is to uncheck the Read-only box in bottom left hand corner of the second screen.  This should work too.
    As a last note, even in 5.5.24.06, I still encounter this issue when importing into nested look up tables. This is up for future fixes.
    I use the uncheck read-only as work around for now. 
    Good luck!
    Savi

  • Solution Manager - Error when executing Job SM:EXEC SERVICES

    Hi,
    I am trying to get the data from the earlywatch alert report and when i start the job SM:EXEC SERVICES.
    The jobs starts but i get an error during is execucion:
    Runtime errors         SYNTAX_ERROR                                          
           Occurred on     17.01.2008 at   14:06:28                                                                               
    Syntax error in program "RDSVASAEW_DBMSS____________052 ".                                                                               
    What happened?                                                                               
    The following syntax error occurred in the program                           
    RDSVASAEW_DBMSS____________052 :                                            
    "INCLUDE report "/1CAGTF/IF_LOGFUNC_000208" not found."                      
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because one of
    the                                                                         
    statements could not be executed.                                                                               
    This is probably due to an error in the ABAP program.   
    I tried to generate all the function modules and i get this error:
    Logical function:  MSQ_TEMPDB_DOWNLOAD            :                    
    Error      1  during generation of  /1CAGTF/IF_LOGFUNC_000208          
    Syntax error.
    Can you help me on this error?
    Best regards,
    Nuno Silva

    Hi Pedro,
    I insert my answer from a similar thread.
    As a pitty, that's a well known error.
    Please check [SAP Note 727998|http://service.sap.com/sap/support/notes/727998]
    Basically, these three steps needs to be performed:
    1) BDL_DELETE_ALL_TABLES
    2) SDCCN - Refresh Service Definitions
    3) Generate Logfuncs
    SE37: /BDL/_GENERATE_LOGFUNCINCLUDES
    OPTION: ALL
    It's also described in the Implementation Guide (IMG), transaction SPRO in the SAP Solution Manager system:
    SAP Solution Manager -> Configuration -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> Service Data Control Center
    -> Activate the Service Data Control Center in the Solution Manager
    -> Generate Includes for Service Data Contol Center
    With the next ST-PI Support Package. The steps can be triggered via the menu of transaction SDCCN.
    Best regards,
    Ruediger Stoecker

  • I get an Adobe Application Manager error when I try to install NeoVoices.

    When I try to install NeoVoices, I get an error that my Adobe Application Manger is possibly damaged, updates are not possible, and that I should download and install a new version of if (Adobe Application Manger.)  I'm stuck.  I have downloaded and installed the latest versoin of Adoble Application Manger, but it still doesn't work, and the Manager works fine otherwise. otherwise. 

    Is it a 32 bit or 64 bit version?

  • CAS Policy Manager error when installing Server SQL express 2012

    Hello everyone,
    I was wondering if anyong can help me with this.
    I am trying to install SQL server express 2012 on a windows 7 computer and am unable to install it.
    When I try to start the installer I get the error "Microsoft .NET Framework CAS Policy Manager has stopped working"
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: caspol.exe
      Application Version: 2.0.50727.5420
      Application Timestamp: 4ca2b8df
      Fault Module Name: ntdll.dll
      Fault Module Version: 6.1.7601.18247
      Fault Module Timestamp: 521eaf24
      Exception Code: c0000005
      Exception Offset: 0000000000027689
      OS Version: 6.1.7601.2.1.0.256.1
      Locale ID: 1033
      Additional Information 1: 00a4
      Additional Information 2: 00a4a2975d5a28cfbbc1bf906fc7eacd
      Additional Information 3: 0146
      Additional Information 4: 0146abaed829ebf2f677c0e9088e54ea
    And after I hit close program on that I get the error:
    CasPol.exe - Application Error
    The application was unable to start correctly (0x0000005). Click OK to close the application.
    And I have tried redownloading it multiple times.
    I have run the .net cleanup tool and a repair tool
    I have uninstalled and reinstalled .net as well to the lastest version.
    With no luck at all.
    Any suggestions on what I might be able to do to fix this?
    An help would be greatly appreciated.

    Hello,
    It points to fact that your .Net Framework is corrupt.Use below tool to repair .Net framework
    .Net framework repair tool
    Additional helpful articles to refer
    CAS policy error message
    CAS policy error message when
    installing SQL server
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Device manager error when trying to load applications

    I've been using the Desktop Manager successfully for several years with my old 8703e.  I finally upgraded to a Style 9670, and updated the Desktop Manager to v6.0.2.44.  It syncs fine with the phone.  However, when I go to work with apps, the DM tells me "The Application Loader Wizard requires the Blackberry Device Manager to be installed.  Please contact customer support."  I have rebooted, repaired, and done a full uninstall and reinstall of the DM, but the same error keeps coming up.  I have worked on this all night, and am wondering if I need to return teh phone and opt for an Android.  Can anyone help me, please?

    Hmmm...maybe a totally clean start over? Here's a process:
    I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
    Further, it has also been reported that when your user profile on windows (type 'echo %userprofile%' in the command prompt) contains spaces, then the installer will not work. In order to solve this issue, log out of your Windows account and log back in using the local Administrator account (or any other account name without spaces) and install the desktop (for all users).
    1) Remove your device OS update package from your PC (add/remove programs)
    2) Cleanly uninstall the RIM Desktop Software:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    Some have reported that there are more registry keys to remove than are discussed in that KB...be sure to search your registry for any related to RIM
    Others have reported the use of a registry cleansing tool to also be helpful
    Still others have reported the use of your original PIM (e.g., Outlook, NOTES, etc.) installation CD, running the "repair" process, to be helpful in some situations
    3) Get a fresh download of the RIM Desktop Software:
    http://us.blackberry.com/apps-software/desktop/
    4) Download (to your PC) a fresh copy of your device OS package from your carrier:
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    5) Install the Desktop Software to your PC
    6) Install (also to your PC), the device OS package
    7) Start the organizer configuration over:
    KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
    KB23681How to configure organizer data synchronization settings using BlackBerry Desktop Software 6.0
    Hopefully that will get things going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Catalog Manager Error when using the Create Report under Tools

    When trying to save the output from the Create Report option under Tools in the Catalog Manager, I get "An Internal error has occurred during: 'Catalog Report'".
    Has anyone else encountered this or does anyone have a suggestion?
    Thanks

    Hi Thaigo,
    We are also having the same problem with 2004s SP9 and SP10.
    1. All the 0TCA* are active.
    2. Super admin role is assigned.
    But still getting the above three errors. Somebody who have overcome this problem please share the corresponding changes to be made in KM Configuration
    Thanks and Regards
    Giri Nath

  • 10g1 Enterprise Manager Error when configuring backup settings.

    When I try to configure the backup settings and I enter the OS admin user and pwd I get:
    Error: Connecting to host as user *****failed: Wrong password for user.
    I know I am inputting the correct pwd.
    Can anyone tell me what I am doing wrong?
    Thanks

    Just in case as it's a confusing screen - the host settings are the operating system user, not a DB user.

  • Calculation manager - error when importing .csc script

    Hi everybody,
    I am using EPM 11.2.1 with an Oracle 11.2.0.2 repository.
    I am new to Calculation Manager in Planning and I have an issue again.
    Using Essbase's admin console I created a script:
    SET UPDATECALC OFF;
    SET AGGMISSG ON;;
    FIX ("FY11", "Current", "Version_I")
    FIX(@DESCENDANTS ("ACC_Property, Plan & Equipment Net",0), @DESCENDANTS ("ACC_Intangible Assets Net",0), @DESCENDANTS ("ACC_Investments",0), @DESCENDANTS ("CapexNature",0), @DESCENDANTS ("Entity",0), @DESCENDANTS ("Period",0))
    "MS_Inv_Dep"=@PRIOR ("MS_Inv_Dep",1) + "MS_Inv_Val"->@CURRMBR ("Period")->@CURRMBR ("Entity") * "MS_Inv_%Dep"->"BegBalance"->@CURRMBR ("Entity")/12;
    ENDFIX
    CALC DIM ("Account","Period", "Measure");
    CALC DIM ("CapexNature","Entity");
    ENDFIX
    I wish to import the .csc in calculation manager but I receive the error (translated from Italian):
    Error during script analysis. Verify the script at row 1 column 7 to row 1 column 12
    I can't figure out what it is wrong. Is there a log somewhere with more details?
    any help will be very appreciate as I am stuck on this too.
    thank you all
    daniela

    Hi John,
    Thanks for the reply (by the way, I appreciate a lot the work you're doing on your ODI blog).
    No, I imported it (File->Import)
    I have a few calc scripts and in order to make transition to Calc Manager faster I thought of importing them.
    Regarding your suggestion to copy and paste it, I tried it and it works.
    I saw Calc Manager generates the script in a 'strange' syntax (because I used the aggregation template). For a simple aggregation the code it generates is like this:
    %Template(name:="Aggregation",application:="",plantype:="",dtps:=("Restriction":=(),"DF1":=[[Period]],"DF2":=[[Account]],"SF1":=[[Entity]],"SF2":=[[CapexNature]],"SF3":=[[]],"DP1":=[[]],"LevelDP1":=[[Descendants]],"DP2":=[[]],"LevelDP2":=[[Descendants]],"SP1":=[[]],"LevelSP1":=[[Descendants]],"SP2":=[[]],"LevelSP2":=[[Descendants]],"SP3":=[[]],"LevelSP3":=[[Descendants]],"UPTOLOCAL":=[[Use default]],"AGGMISSG":=[[Yes]],"FRMLBOTTOMUP":=[[Use default]],"CALCCACHE":=[[Not specified]],"Debug":=[[Debug wizard OFF]]))
    (I have inquired about thin in an earlier post)
    I can add my own code (calc manager creates a /*STARTCOMPONENT:SCRIPT*/ /*ENDCOMPONENT*/area).
    Regarding the code generated for templates, can this code be updated? How do I change in the above generated code the CALC DIM into AGG?
    thank you again
    daniela

  • Work Group Manager ERROR when trying to create a group

    i have the following hardware:
    Model Name: Xserve G5
    Model Identifier: RackMac3,1
    Processor Name: PowerPC G5 (3.1)
    Processor Speed: 2.3 GHz
    Number Of CPUs: 2
    L2 Cache (per CPU): 512 KB
    Memory: 6 GB
    Bus Speed: 1.15 GHz
    Boot ROM Version: 5.1.7f2
    i have server admin setup on this machine, this machine is bound to AD
    When i open up WGM and go to groups and try to create a group i receive the following error...
    Got Unexpected error
    Error of type eDSNoStdMappingAvailable (-14140) on line 1189 of /SourceCache/WorkgroupManager/WorkgroupManager-319.2.2/PMMUGMainView.mm
    I have no idea where to start with this..

    Just to be clear - what domain are you trying to create the group in?
    Are you trying to create an AD via WGM because you can't feed changes upwards to AD.
    If you're trying to create a group either locally or in OD then that should work as long as you are authenticated. One gotcha in OD is that you can't create a group with the same name as the AD you are bound to but I'm pretty sure trying to do that gives you an intelligible error.
    HTH,
    =Tod
    PS There are also OD specific groups in the OS X Server forums where you might get more eyes on your question as this forum is for Xserve specific issues.

Maybe you are looking for