Talent Management on Ehp4

Hello every one i am involved in the talent managemt implementation on EHP4. I would like to know about the key integrational aspects of different modules in Talent management.
I mean can any one help me out with full integration , automated business process invovling SAP E -Recruitment, PCP, ECM, LSO and Perfomance management.
I have worked on SPA ECC 6.0 before but as due to lack of media at this time i have not been able to check out the system .
your assitance would be highly appreciated.
Regards

any feed back guys ???

Similar Messages

Talent Management (EhP4) - cannot find structural authorization profiles

Hi All, 
I have looked in 3 different SAP ECC6.0 EhP4 system for the Talent Management structural authorization profiles stated in the IMG documentation and on the help.sap.com website. The profiles are: 
TMS_PROFILE 
TMS_ALL 
TMS_MAN_PROF 
There are also several "sub" profiles for TMS_PROFILE. 
To take an example from help.sap.com on their Authorizations page (http://help.sap.com/erp2005_ehp_04/helpdata/en/7b/6f92413c3a2e7be10000000a1550b0/content.htm ), the SAP_TMC_SUPER_TALENT_MANA_SPEC clearly indicates the TMS_ALL structural authorization profile is in the standard system: 
Authorizations for talent management superusers 
For more information, see Talent Management Superuser. 
The structural authorization profile TMS_ALL is also available as a template for the Talent Management Superuser. 
For more information, see Customizing for Talent Management and Talent Development under Basic Settings ® Authorizations in Talent Management ® Define Structural Authorizations. 
So... does anybody know anything about these and where I can find them? Do they require some form of activation outside of the standard switch activations for Talent Management? I've looked in several tcodes (SU01,PCFG, OOSP etc) for them but no luck. 
Any help gratefully received and points will be awarded for helpful answers and solutions! 
Best regards, 
Luke

Hey Luke:
Could you do me a favor and look in client 000 (the SAP delivered client)? You generally need a basis person for this activity, and I can't find one now on my own end to confirm my theory. However I'm pretty sure if you went to OOSP in client 000, you'd see those profiles. They were either never copied over from 000 or your security friends deleted all the profiles that are SAP delivered in the clients you're looking at.
I could talk for a super boring amount of time about the security concept of "SAP delivers too much access with their roles so we don't use them" that a good number of security teams use - but that's a story for a different day.
Take a peek in 000 and let me know what you see. If they're there, you can always have your basis chums copy them over to your clients that you want them in (presumably your security config client).
Thanks,
Chris

New SDN blog post: Setting up TREX for SAP EhP4/5 Talent Management

Hi all,
I have written a new SDN Blog on Setting up NetWeaver Embedded Search (TREX) for SAP EhP4 Talent Management:
http://scn.sap.com/community/erp/hcm/blog/2010/09/20/setting-up-netweaver-embedded-search-trex-for-sap-ehp4-talent-management
Enjoy!
Luke

Hi Luke
I'm looking for a copy of the SDN Blog, but having trouble trying to find it.
All pages lead to "Page not Found".
Is it possible for you to post this again or email me a copy of the Article ?
Thanks in Advance
Min

TREX - Search Talent Management

Hi All,
I know that there are many threads on the TREX and have looked at all of them and tried some of the things but i still get the error search not available.
We have created all search connector in the admin cockpit and have indexed all of them with no errors. All 32 of them are active. I then ran report ESH_TEST_SEARCH to test the searches. All of the objects templates return results except the following:
HRTMC_AES_DOCUMENTS
HRTMC_AES_ELEMENTS
HRTMC_AES_TEMPLATES
HRTMC_AUTHORITY_VIEW
HRTMC_CENTRALPERSON
HRTMC_FUNC_AREA
HRTMC_JOB
HRTMC_JOB_FAMILY
HRTMC_ORG_UNIT
HRTMC_POSITION
HRTMC_QUALIFICATION
HRTMC_REL_CP_JF_744
HRTMC_REL_CP_Q_032
HRTMC_TALENT_GROUP
For most of these templates I get the following error:
Search Engine Error 29 for DHR310HRTMC_FUNC_AREA : attribute not defined for physical index;index esh:dhr310dhr310hrtmc_func_area~functional_areayy has no attribute 'objid'.
For the HRTMC_AUTHORITY_VIEW i get no results, it comes back no values and has a yellow traffic light in the Log viewer. In the Job Log in the Admin Cockpit i see the following
31.05.2011 21:54:23 Object connector DHR310HRTMC_AUTHORITY_VIEW: New status: Indexing
31.05.2011 21:54:23 The implementing class does not support the iterator by time interface
31.05.2011 21:54:23 Implementation did not provide any data -> exit indexing
31.05.2011 21:54:23 Object connector DHR310HRTMC_AUTHORITY_VIEW: New status: Active
31.05.2011 21:54:23 Job finished
I also activated BADI HRTMC_AUTHORITY_VIEW_DELTA in the IMG and ran report RPTMC_CREATE_CHANGEPOINT_AUTH. I then scheduled ESH_IX_PROCESS_CHANGE_POINTERS for the HRTMC_AUTHORITY_VIEW, hoping the I would be returned with some results.howver
I do have a TMS linked to several org units via relation 741 and this is returned in the test search HRTMC_REL_S_O_RESP. In addition if I go to a Talent Review Meeting in the portal and click on 'ADD' to select an org unit, the managers of the Org Units that I am related to appear on the list. However as soon as I select any of them, they are added to the participant list but non of the nominated talents appear, i get the following message:
'No nominations are displayed since the search is not available'
for all other searches i get the error 'Search is not available' or 'No Relevant Records Were Found for This Search'
I Also checked SLG1 logs after attempting the searches and got the following errors:
2007 for DHR310HRTMC_CENTRALPERSON : NameServer error: no servers found; IndexId:esh:dhr310dhr310hrtmc_centralperson~~sap_talent
Exception occurred in program CL_ESH_IF_SEARCH_RESPONSE=====CP, include CL_ESH_IF_SEARCH_RESPONSE=====CM006, row 4
An exception has occurred
29 for DHR310HRTMC_CENTRALPERSON : attribute not defined for physical index;index esh:dhr310dhr310hrtmc_centralperson~personal_datayy has no attribute 'objid'
Exception occurred in program CL_ESH_IF_SEARCH_RESPONSE=====CP, include CL_ESH_IF_SEARCH_RESPONSE=====CM006, row 4
I also tried creating my own serch request using one of the search templates returning results. In this case i used the HRTMC_REL_CP_TB_743 templates with talent group ID as search field and assigned it to one of the search configurations. I then however got the following error.
The following error text was processed in the system DHR : The ASSERT condition was violated. The error occurred on the application server sivrs106_DHR_00 and in the work process 0 . The termination type was: RABAX_STATE The ABAP call stack was:
Method: GET_AUTHORIZATION_QUERY of program CL_ESH_IF_SEARCH_REQUEST======CP
Method: SEARCH_ONE_CONNECTOR of program CL_ESH_IF_SEARCH_REQUEST======CP
Method: SEARCH of program CL_ESH_IF_SEARCH_REQUEST======CP
Method: CONSTRUCTOR of program CL_HRTMC_SEARCH_REQUEST=======CP
Method: GET_INSTANCE of program CL_HRTMC_SEARCH_REQUEST=======CP
Method: TRIGGER_SIMPLE_SEARCH of program CL_HRTMC_AC_SEARCH============CP
Method: ONACTIONSTART_SEARCH of program /1BCWDY/JUNQ9FJYULV16JASJHWU==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/JUNQ9FJYULV16JASJHWU==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================
Anyone have any ideas on how i can resolve this.
Apologies for posting such a long thread, just trying to provide full picture.
Regards
Imraan

Hi Imraan,
You should be congratulated on a thorough post! What version and revision of TREX are you using? You should use TREX 7.1 revision 16 or higher. You should also review the PA-TM SAP notes for TREX. I would recommend reviewing some of the following (some you might need to come back to later):
u2022     1376055 - ESH_ADM_INDEX_ALL_SC: Exception in step 2: Create
u2022     1384953 - ESH: Error message 'A connection already exists' in cockpit
u2022     1437946 - TMC search: Frequently asked questions
u2022     1441190 - Error in model assignments to logical system
u2022     1457940 - Transporting software components: Error in after-import
u2022     1476894 - Transporting software components: Paths are lost
u2022     1483890 - Importing software components directly to target client
u2022     1492752 - Program to create a join index retroactively
u2022     1502296 - Too few ESH_OM_LOGSYSA entries after creating a connector
u2022     1538688 - Indexing Log: Warning "Object 'nw_esh_tst_auto' not ..."
u2022     1516237 - TMC search: Long runtime for indexing of HRTMC_REL_S_Q_031
u2022     1518396 - Indexes are not filled after TREX conversion
u2022     1520538 - TMC search: Performance for extraction of documents
u2022     1523648 - The search does not find any hits
u2022     1526710 - TMC search: Error during position switch by TMS
u2022     1529878 - Performance of authorization indexing
u2022     1534172 - TREX 7.10: Revision 42
u2022     1536663 - TMC search: Long runtime during indexing HRTMC_REL_SC_JF_FN
u2022     1536656 - Missing search attr for person search in Succession Planning
u2022     1540869 - TMC search authorization indexing with initial user ID
u2022     1541984 - Search connectors are not found
u2022     1542741 - Deleting connections
u2022     1550964 - TMC srch: Qualification srch criteria for CP-Q relationship
u2022     1551029 - TMC: Incorrect authorization check for PA infotypes
u2022     1554061 - TMC search: Error in search fields for job evaluation
u2022     1555950 - Indexing of HRTMC_AUTHORITY_VIEW: Data packages are too big
u2022     1558355 - TMC search: Empls. that have left company in search result
u2022     1560966 - TMC search: Error message when copying search configurations
u2022     1561070 - Termination when saving after deleting system assignments
u2022     1562742 - TMS / Search: Indexing fails with HRTMC_REL_S_MANAGER
u2022     1568563 - TMC search: Error when setting up authorization index
u2022     1567065 - TMC search: Simplifying the authorization indexing
u2022     1575454 - TMC search: Performance during CP indexing
u2022     1584309 - TMC search: Change pointer for newly created org. units
Also, did you follow these steps once TREX was connected?
[/people/luke.marson/blog/2010/09/20/setting-up-netweaver-embedded-search-trex-for-sap-ehp4-talent-management]
Best regards,
Luke

Talent Management - TM - Trex 7.1 - Delta Indexing

luke.....are you out there??
congrats on your blog being featured right on the SDN homepage... very nice...
http://scn.sap.com/community/erp/hcm/blog/2010/09/20/setting-up-netweaver-embedded-search-trex-for-sap-ehp4-talent-management
and congrats to Chris on his first two excellent blogs....
http://scn.sap.com/people/chris.mcnarney/blog/2010/08/26/whats-included-with-the-predefined-performance-management-process
http://scn.sap.com/people/chris.mcnarney/blog/2010/09/09/whats-included-with-the-predefined-performance-management-process--part-2
all 3 blogs are very helpful since there is little information available out there on these topics...
so we've been testing the delta indexing program very heavily - ESH_IX_PROCESS_CHANGE_POINTERS
we have found that it does not appear to be able to index new hires (new central_person index does not pick up the new CP). The only way this data can be indexed is by running a full re-index. That is problematic for us, b/c we were hoping to only do full re-indexing 1 a week or even 1 a month. our indexes take 2-3 hrs to complete and trex searching is pretty much inoperable during that time.
Have you tested new hires with delta indexing? it seems as a gap in the change_pointers program. We opened up OSS message to SAP.
some additional thoughts working with the program, relative to your blog. I would highly recommend that anyone testing this makes sure the following notes are implemented in your system. The first one is the most recent and we ourselves did not have that implemented.
1. 0.350 BC-EIM-ESH 1441190 Error in model assignments to logical system 24.02.2010
2. 0.230 BC-EIM-ESH 1408655 Alerts in syntax check due to unused indexes 18.11.2009
3. 0.260 PA-TM 1395703 Positions and termination are missing for indexing 30.10.2009
4. 0.330 BC-EIM-ESH 1249482 Functional corrections for Enterprise Search 7.01 SP03 26.01.2009
Another area which we found from testing: SAP by default does not delta index structural authority view. What this means is that if a new talent specialist is added with 741 relationship there access to see that structure will not be available in TREX search by default delta indexing. This would also impact existing organizations and positions shifted under existing 741 relationships.
The information in spro is actually quite helpful, you can find it in: talent management and talent development > basic settings > search > BAdI: Activate Delta Indexing for Authorization Data
Activtate the BADI, than the program to "create the change pointers" must run periodically in your system. This is done with RPTMC_CREATE_CHANGEPOINT_AUTH. Once that program creates the change pointers the next time your scheduled delta program runs (ESH_IX_PROCESS_CHANGE_POINTERS) all of the structural auths will be created and indexed correctly.
If we can just now get new hires to work with ESH_IX_PROCESS_CHANGE_POINTERS we will probably only run the full re-index once a week or once a month.
Let me know your thoughts,
Michael
Message was edited by: Luke Marson
Message was edited by: Luke Marson

so if anyone is interested, from my previous post I mentioned that new hires were not getting picked up by the change pointers program.
after further testing though, we found that when the authorization recon program identifies the new hires and appropriately creates a change pointer.
conclusion: to avoid full re-indexing of trex indexes, perform the following steps:
1. implement / activate the BADI - HRTMC_AUTHORITY_VIEW - talent management -> basic settings -> search
2. Schedule program RPTMC_CREATE_CHANGEPOINT_AUTH - every 30 mins, or 1 or 2 hr. This program will capture whenever anything changes from an authorization data perspective. This would include identifiying new central persons (new hires) or new TMC specialist being setup with 741 relationship. This program "creates change pointers" which than feeds the main delta program - ESH_IX_PROCESS_CHANGE_POINTERS.
3. Use Luke's blog on the instructions for the delta program - ESH_IX_PROCESS_CHANGE_POINTERS - this program you can have run every 5 mins, 10 mins, 15 mins, based on your needs. this processes all delta changes, the first time the program runs after the RPTMC_CREATE_CHANGEPOINT_AUTH program finishes it will also processes the data authorization changes, otherwise every other time the program is running it will catch non-data authorization for all the other indexes (employee name change, new performance rating, new potential, position name change, new profiiciency scale, new career profile data, etc).
hope this helps somebody!
michael
Edited by: Michael L Pappis on Oct 7, 2010 12:05 AM

Problem in Creating data for HCM Talent management System Risk of Loss data

Hello there,
I am trying to enter data for Risk of Loss in HR HCM TMS. Does anybody know in which SAP portal Release this functionality is delivered i have SAP portal 7.00 with JEECOR and JEE and with SP 16. i think all the new functionality delivered in SAP ECC6 EHP4 is supported in SAP portal 7.00 with NW EHP1. Can anybody help in configuring risk of loss in MSS package. I will really appreciate your help in the same. or any useful link for Portal configuration specific to HCM.
Thanks
Mandeep

Hi mani,
configuring Risks is part of the talent management suite, talent assessment.
check out this documentation on SAP help:
http://help.sap.com/erp2005_ehp_04/helpdata/en/b5/ae52db46094946933b2c4dd6cb5ae7/content.htm
Under SPRO you will want to use talent management -> talent assessment
there are however a number of basic things that should be looked at under talent management -> basic settings. Particularly for the "assessment landing" page to work it involves integration between the central person and the SAP business partner. This is the first step in spro, under tm -> basic settings.
Best Regards,
Michael
Edited by: Michael L Pappis on Aug 10, 2010 12:47 AM

Talent Management & Succession Planning

Hi
As part of the EHP4 functional upgrade of HCM core processes for Talent Management such as Succession Planning or talent development is getting switched on.
Any input on the impact it will have on existing BI reports on succession planning which is based on ehp3 data model.
(The latest talent Management and talent development BI content is available only in the release of EHP5 package)
Thanks & Regards
Venkat

Hi Dinu,
It sounds like a data issue. SP is probably reading the HRP1001 values but somewhere the data may have been corrupted or an object incorrectly deleted/unassigned. I would just delete the relationship in PP01 if not actual successor is assigned.
Kind regards,
Luke

Talent Management

Hello,
Scenario: EHP4 - Talent Management --> Performance management integrated with Compensation Mgmt
is it posible to have the budget check to be made, when the manager is entering the final rating for an employee in the appraisal screen.
Is that a standard functionality? can you please share some links
Thanks
Sera

Suggestions please..

Talent Management Grid

Hello Experts,
We are currently implementing Talent Managment Ehp6 and Nakisa 4.0. I have a couple of questions
1) I've researched several SCN posts and blogs about how the Performance/Potential grid has to be a 5,6,9 or 15 box grid and that the values (scales) used in performance must also be used in the talent mgmt grid. When we implemented Performance Management (Ehp4) we used a 20 value scale (1-5 with .25 gradients in between). I would just like to clarify that with everything I have read the Grid in Talent Mgmt and Nakisa will not support this large of a scale. That there isn't any BADI or Enhancement that we can use? It seems like we will have to reduce our scale in Performance to be able to use it in Talent Management/Nakisa. Is that correct?
2) I'm a bit confused about the Writeback functionality with Talent Management and Nakisa. I understand that the Talent Mgmt has their own infotypes (i.e. Potential and Performance) and a Manager or TMS can change the potential/performance in the grid during a Talent Meeting. I'm trying to understand how Talent Mgmt updates Nakisa when these ratings get changed? Or does the TMS and Manager have to change the ratings in both places since Nakisa also uses a grid? Also what happens when you move from a performance template in one year to a performance tempalte in the next year? Does the data save or does it get replaced?
Any assistance or clarification would be much appreciated
Sarah

Luke,
Thank you for taking the time to reply to my questions, I appreciate it.
In regards to the peformance scale we didn't go the PMP route, we went with the Flexible. When I go to the template in the appraisal catalog and try to add the Follow-up BAdI under the enhancement tab it gives me the information below :
"Note
Do not use the BAdI implementation for appraisal templates that you created using the transaction Appraisal Template Catalog (PHAP_CATALOG).
After you have completed an appraisal, the system copies the potential value and performance value to the Potential (7408) and Performance (7409) infotypes that are relevant for the talent review meeting.
The BAdI implementation can only be implemented with an appraisal template of type Performance Management that was created in the Customizing activity Configure Form for Performance Management Process since the appraisal values of the potential assessment and performance assessment are expected to be in certain places in the appraisal template or appraisal document."
Reading this I took this note to mean that if we created a Flexible Appraisal Template that I create via PHAP_CATALOG_PA that I could not use these follow-up BAdIs. That you can only use this follow-up BAdI if you created a form/template using the PMP process.
Am I understanding this correctly? Can you not use the Calibration Grid if you created a template in the catalog using the Flexible templates? In our performance appraisal we don't use the "Final Appraisal" column for our final performance rating. We created a custom column that stores the final rating.
Thanks again
Sarah

TREX vs Enetrprise Search - Talent Management

Hi,
We are implementing Talent Management and would like to find out what do we require for the enabling search functionality.
Do we require TREX or Enterprise search?
We currently have TREX version 7.0 installed and not Enterprise search. What is the difference between Enterprise search and TREX?
Please can someone advise?
Regards
Imraan

Hi Imraan,
TREX is the engine that runs the Enterprise Search that you will use in Talent Management. You need to install TREX on a dedicated server and connect it via RFC to SAP. Then you need to enable the business function ENTERPRISE_SEARCH in SFW5 and activate the ESH cockpit service in SICF. Then you need to create and index your search object connectors. You can use this guide for that:
[/people/luke.marson/blog/2010/09/20/setting-up-netweaver-embedded-search-trex-for-sap-ehp4-talent-management|/people/luke.marson/blog/2010/09/20/setting-up-netweaver-embedded-search-trex-for-sap-ehp4-talent-management]
Good luck!
Luke

Regarding Talent Management Infotypes !!!

Hi Seniors,
As,I am assigned to work on career and succession planning module... I would like to know about the info types 7400, 7410, 7402, 7403 .... etc.
When to maintain these info types ?
Where to maintain info types?
How to see these info types?
Pls suggest
Regards,
Ritu

Hi Ritu,
The Portal is for the following applications:
Talent Profile for Employees
Talent Profile for Managers and Talent Management Specialists
Talent Review Meetings
Talent Groups
Corporate Goals and Values
Talent Assessment
None of these processes can be managed in the SAP R/3 system. Therefore it is not possible to have a holistic end-to-end succession management process, since you can only manage succession planning of positions.
For your search issue, have you installed and configured TREX? See this blog for information:
Setting up NetWeaver Embedded Search (TREX) for SAP HCM Talent Management EhP4, 5 and 6
Best regards,
Luke

Related to Talent Management Data to be Captured

Hi,
Im new to Talent Management.I was going through the steps in SPRO. In Succession planning,we have Qualifications,Work Experience and Education details that are to be captured.And the same Fields related to Candidate and Requisition is Captured in Erec----->TalentWarehouse--->Candidate,Requisition(Spro path).I wanted to know why these fields are to be maintained multiple times.Is it because there are not integrated with other,or any other reason.Pls help me out in this
Regards

Hi,
before EHP4 Succession Planning was part of e-recruiting. With EHP4 succession planning/Talent management is a separate module. If you use Talent Management you do not have to maintain talent data in SPRO path for e-recruiting. Please do it under Talent Management for internal employees ( not for candidates)
best regards
Martin Hastik

Talent Management in MSS.

Good Night.
I am implementing Manager Self-Service for BP 1.41. And want know , Why does not appear in the navigation area the following workset Talent Management, Recruiting?
What is the cause? What should I do??
This is displayed in my Portal in the MSS
[My Portal|http://www.freeimagehosting.net/uploads/42d3bca051.jpg]
This was got of a screenshot of Market Place.
[Image of Portal Documentation SAP|http://www.freeimagehosting.net/uploads/31422eed6c.jpg]
Regards.

This is because you are still accessing the old MSS role...
through user admin assign the new MSS role from the EhP4 folder and you will get the Talent Management link...
Instead of the role - pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.roles/com.sap.pct.erp.mss.manager_self_service
Assign the role - pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.roles/com.sap.pct.erp.mss.manager_self_service
Cheers,
RJ

Issue in creating dev plan in talent management specialist role

Hi ,
I am facing issue in creating development plan through talent management specialist role . Actually in one system I have 2 location one is india & another one is USA . its working for india but when I search india employee its show no employee found . can you please guide me
Tarun

Hi Luke ,
According to one of your article , I run HRALXSYNC in r/3 , in that all indian employee are green but USA employee in RED . I found following error , can you please guide me that what is mean by that ?
The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
Qualification 90007487 does not exist
The incorrect HR object has the key 01NA90011026
The incorrect infotype record is 40601NA900110265105 1 1900010199991231
The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
Serious error; see log
The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
Qualification 90007487 does not exist
The incorrect HR object has the key 01NA90011026
The incorrect infotype record is 40601NA900110265105 1 1900010199991231
The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
Thanks
Tarun

Issue in EHP5 Talent Management (Team Goals) Cascade goals functionality

Hi Friends,
Issue in EHP5 Talent Management (Team Goals) Cascade goals functionality.
Under Team Object While try to cascade goals, it pop-Up Warning Msg u201CChoose Save to save the goal in the employee document. The goal can no longer be deleted, only set to obsoleteu201D.
If we click Ok to proceed further, I am getting error stating u201CYou have made no selection" and " No appraisal template defined ".
Same functionality is working fine in u201CPerformance Management (Predefined)u201D
With Regards
Seranjeeve Kumar

Please set the parameter PROCESS "PMP" in the iview configuration.
ie
ROLE_ID=PA&PROCESS=PMP in application parameters
content provided by SAP ->
specialist ->
Talent management Specialist ->
iViews ->
COmpany goals etc
and you can confirm using this
CL_HAP_CASCADE_GOALS > meth0d GET_VALID_APPRAISAL_TEMPLATES
The parameter mentioned in the note 1457057, the one that you enter in
transaction SE80 is the default value. However, if you call application
with parameter PROCESS=PMP then the PMP process for cascading goals will
be used.
check note 1523527

Talent Management on Ehp4

Similar Messages

Maybe you are looking for