Talent Review Meetings - Talent Mgt

Dear All,
We are on ECC6, Eph4
When we click onto Talent Review meetings - Add participants getting an error message " The specified configuration is incorrect". All are intact in configuration. Is that a support pack issue. Because we are on support package 28. If so is there an OSS note applicable. Below is the screen shot on same.
Would appreciate your inputs / suggestions.
Kind regards
Venkat

Hi Luke,
As suggested by you we did run the functional module HRTMC_SEARCH_OBJECTS, it even returned the values. No error encountered. But while adding participants in TRM  " The specified configuration is incorrect".
Below is the screen shot wrt SAP_Talent search
Below is the screen shot wrt SAP_TALENT_SIMPLE search
Would appreciate if you could share in your inputs / suggestions.
Kind regards
Venkat

Similar Messages

  • Talent Review Meeting- Start Presentation

    Hello Experts,
    I've created talent review meetings as the TMS and have assigned participants and support groups with no issues.  I'm curious as how the manager and support group members are aware that a Talent Review meeting has been created with them as participants.  I do not see anyplace here for workflow. Also on the MSS side there isn't a link for the Talent Review meeting. SAP help gives the impression that all participants can view this meeting together however it looks like only the TMS can control and display the meeting by clicking on Start Presentation. That an external webex will have to be created for the participants to view the meeting. Is this correct?
    Furthermore the client would like sometype of workflow to be sent out when Talent Meetings are approve or when employees nominations are approved. Is this possible?
    Thank you
    Sarah

    Hi Sarah,
    A TMS would need to inform the users manually. Usually when they create the handout they would distribute this to the participants. Of course, if the business is aware of the process then they should expect to be part of a meeting each year (or each cycle if less/more than one year).
    You are correct that only a TMS can control the meeting. If they want users to view the presentation from an external location then they would need to use some virtual/web-based conferencing software.
    I'm no expert on workflow so I can't help with your last query, so I would recommend reaching out to a workflow consultant. Because Talent Review Meetings are an object (RM) I would hope that some form of workflow can be attached.
    Best regards,
    Luke

  • Talent Review Meeting - Follow-up activities

    Hello Experts,
    We are on ERP 6.0 - EHP6.
    I have created a talent review meeting, but when I go to do the Follow-up Activities, the button is disabled. There is a Badi to enable this button?
    After creating this talent review metting, the value of performance and Potential was saved in infotype 7409 and 7408, but in my opinion it should be also saved in the appraisal documents and it doesn´t happen.
    Could you help me?
    Thank You
    Clemilda

    Hi Luke,
    Yes, I configurated look the prints bellow.
    The status off apraissal is
    The botton UPDATE_POST_TRM I create, because in the sistem don´t existe.
    I configurate the button in Talent Management and Talent Development --> Assessment of Employees -> Employee Assessment with Flexible Appraisal Processes-> Define Data Retrieval for Flexible Appraisal Processes->Assign Status Change to Appraisal Templates.
    Best regards,
    Clemilda

  • Transaction Codes: Talent Profile, Talent Assessment, Talent Review Meeting

    Hi experts,
    When a user accesses the Talent profile, Talent Assessment and Talent Review Meeting on the Portal does SAP call specific transactions on the backend.
    I would like to find out what are the transaction codes being called(if any) to restrict access to the Talent Profile, Talent Assessment, and Talent Review meeting. I have checked the SAP standard roles for Talent Management to
    get an idea however, P_TCODE= All Transactions.
    Thanks

    >
    Luke Marson wrote:
    > HI Francesco,
    >
    > A number of BAPIs are used in the portal and in STVN SuccessionPlanning. Go to SE37 and check out all of the HRTMC_* functions available (as per Michael's suggestion for SE93). You will see functions to read and write back various data. You might be able to re-write the apps or your own apps, but I'm not sure on the feasability of this.
    >
    > I expect Michael can have further input.
    >
    > Best regards,
    >
    > Luke
    Hi Francesco -
    So Luke is more a technical guy than me, and he already gave some great input.  Here are my thoughts. 
    I think an initial assessment would be that this is a challenging effort.  There are number of BAPIs that could be potentially be used utilized.  However, much of the entire Talent Management space recently developed by SAP was written with ABAP Objects using class / methods.  Exposing these as web services to be used by XI or wrapping the functionality of the class / methods into a custom RFC would require some effort.  
    The link below shows some pro's and con's on ABAP objects. 
    http://help.sap.com/saphelp_nw73/helpdata/en/60/8c94422533c46ae10000000a155106/frameset.htm
    This paragraph really touches on what you would need to do: 
    Classic access through RFC is only possible using function modules. You can generate server-side proxies for ABAP classes using XI and thus provide existing functions as external services in classes. However, function modules are still a better choice in comparison in order to make the functions accessible as a Web service or using RFC.
    So to really know the scope of what you are trying to do, we would need some more specifics.  Are you just wanting to retreive some SAP data and display it on variouis .net screens.  Are you actually trying to execute a process, like succession planning, in a .net application?
    Hope this helps.
    Thanks Mike
    Edited by: Michael L Pappis on Mar 28, 2011 8:11 PM

  • Error during creation of PDF form in Talent Review Meeting

    Hi all,
    I encountered this error when I tried to create a PDF form in Talent Review Meeting.
    Error creating PDF
    Message no. HRTMC_BASIS210
    Diagnosis
    An error occurred while creating the PDF.
    System Response
    ADS: com.adobe.ProcessingException: com.adobe.Proc
    Any ideas as to what is the problem?
    Thanks for any help rendered.

    Hi,
    This is the error msg:
    Caused by: java.io.FileNotFoundException: E:
    usr
    sap
    D28
    SYS
    global
    ADS_E064E44A2C30BCF19412005056B755AF.xfd (The system cannot find the file specified)
    #1.5 #005056B74D0E00610000082400000C400004A0B505921CCC#1302599249779#com.adobe.ads.operation.support.RenderErrorLog#com.adobe/AdobeDocumentServices#com.adobe.ads.operation.support.RenderErrorLog#anonymous#126858#SAP J2EE Engine JTA Transaction : [0771d2a01ffffff9f5f]#n/a##4b09d69264e411e08895000000771d2a#SAPEngine_Application_Thread[impl:3]_14##0#0#Error#1#/System/Server#Plain###Could not read xdp for embedding.  This template cannot be embedded.
    null#
    #1.5 #005056B74D0E00610000082600000C400004A0B505F55412#1302599256280#com.adobe.ads.request.ADSRequest#com.adobe/AdobeDocumentServices#com.adobe.ads.request.ADSRequest#anonymous#126858#SAP J2EE Engine JTA Transaction : [0771d2a01ffffff9f5f]#n/a##4b09d69264e411e08895000000771d2a#SAPEngine_Application_Thread[impl:3]_14##0#0#Error#1#/System/Server#Plain###Processing exception during a "Render" operation.
    Request start time: Tue Apr 12 17:07:29 SGT 2011
    com.adobe.ProcessingException: com.adobe.ProcessingException: File not found: E:
    usr
    sap
    D28
    SYS
    global
    ADS_E064E44A2C30BCF19412005056B755AF.xfd
    Exception Stack Trace:
    com.adobe.ProcessingException: com.adobe.ProcessingException: File not found: E:
    usr
    sap
    D28
    SYS
    global
    ADS_E064E44A2C30BCF19412005056B755AF.xfd
                    at com.adobe.ads.request.ADSRequest.processOperations(Unknown Source)
                    at com.adobe.ads.request.ADSRequest.process(Unknown Source)
                    at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
                    at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
                    at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
                    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
                    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
                    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
                    at java.lang.reflect.Method.invoke(Method.java:331)
                    at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
                    at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
                    at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
                    at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
                    at SoapServlet.doPost(SoapServlet.java:51)
                    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
                    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
                    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
                    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
                    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
                    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
                    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
                    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
                    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
                    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
                    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                    at java.security.AccessController.doPrivileged(Native Method)
                    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
                    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.adobe.ProcessingException: File not found: E:
    usr
    sap
    D28
    SYS
    global
    ADS_E064E44A2C30BCF19412005056B755AF.xfd
                    at com.adobe.ads.operation.Render.execute(Unknown Source)
                    at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
                    ... 30 more
    Caused by: com.adobe.ProcessingException: File not found: E:
    usr
    sap
    D28
    SYS
    global
    ADS_E064E44A2C30BCF19412005056B755AF.xfd
                    at com.adobe.ads.data.FileURLData.getInputStream(Unknown Source)
                    at com.adobe.ads.data.PDFData.getReader(Unknown Source)
                    at com.adobe.ads.xdp.FormDataTextParser.parse(Unknown Source)
                    at com.adobe.ads.operation.support.FormData.split(Unknown Source)
                    at com.adobe.ads.operation.Render.initializeData(Unknown Source)
                    at com.adobe.ads.operation.Render.initialize(Unknown Source)
                    ... 32 more
    Caused by: java.io.FileNotFoundException: E:
    usr
    sap
    D28
    SYS
    global
    ADS_E064E44A2C30BCF19412005056B755AF.xfd (The system cannot find the file specified)
                    at java.io.FileInputStream.open(Native Method)
                    at java.io.FileInputStream.<init>(FileInputStream.java:106)
                    ... 38 more
    Referring to the post on ADS: The render error ,
    under sid/global/Adobedocumentservices folder there are a) XMLFormService and b) REndererrorlog folders but empty.
    Could this be causing problems?
    Thanks.

  • Talent Management- Calibration grid error in Talent Review Meeting

    Hi all,
    I'm getting errors when running the calibration grid in Talent Review Meeting:
    No entry for BAdI field RISK in table T77TMCAESFIELD
    No entry for BAdI field CHANGE_NEED in table  T77TMCAESFIELD
    No entry for BAdI field RISK in table T77TMCAESFIELD
    No entry for BAdI field IMPACT_LOSS in table T77TMCAESFIELD
    Please guide me on what to do to resolve this.
    Thanks.

    Hi Eric,
    In order to fix a bug with the Calibration Grid, the following values need to be entered into table T77TMCAESFIELD. This can be done via IMG > Talent Management and Talent Development > Basic Settings > Adjusting the User Interfaces > Configurations for Data Retrieval > Extend Fields Selection > Adjust Data Retrieval for Appraisals, Evaluations, and Surveys
    RISK
    IMPACT_LOSS
    CHANGE_NEED
    The values can be dummy values (i.e. just the name and the validity dates) or, if using Risk, it can be a VB object from the appropriate Talent Assessment form(s).
    Best regards,
    Luke

  • Talent Management - Talent Review Meeting - Nominations under Participants

    Hi experts,
    In talent group, I have nominated some employees under a manager. Then during the creation of the Talent Review Meeting, when I add the manager as the participant, I do not see the nominees under the manager which I nominated earlier.
    Did I miss any steps/configuration to this so that those nominated will appear under their respective manager?
    Thanks in advance.

    Hi Eric,
    In order to fix a bug with the Calibration Grid, the following values need to be entered into table T77TMCAESFIELD. This can be done via IMG > Talent Management and Talent Development > Basic Settings > Adjusting the User Interfaces > Configurations for Data Retrieval > Extend Fields Selection > Adjust Data Retrieval for Appraisals, Evaluations, and Surveys
    RISK
    IMPACT_LOSS
    CHANGE_NEED
    The values can be dummy values (i.e. just the name and the validity dates) or, if using Risk, it can be a VB object from the appropriate Talent Assessment form(s).
    Best regards,
    Luke

  • Talent Review

    Hi All,
    We are currently using ebusiness suite(ebs) 12.1.3 hrms modules. our company wants to purchase Talent Review and Succession planning module and integrate with the pms module in ebs. How do we go about doing the setups for below business process:
    We have 5 levels of performance categories for our staff and they are rated to three levels as shown below:
    Not Assessed
    Under Performer
    Basic Performer
    High Performer
    High Potential
    HIGH (3 score)
    3
    6
    9
    12
    15
    MEDIUM (2 score)
    2
    4
    6
    8
    10
    LOW (1 score)
    1
    2
    3
    4
    5
    NOTE: Last 3 year rating year-wise would be loaded in the system. Business line manager have to view 3 years back performance results.
    How can we use the above info and create the 15 Grid in Fusion Talent Review?
    Pls advice/suggest i am new to this.
    Regards,
    Jenny

    please all your comments are welcomed
    any one out there who could guide me how we can do the 15 grid matrix.  I am aware of the standard 9 grid matrix but i do not really know how to go about with a 15 grid matrix.
    please help!

  • Talent Managemnet Core: Talent Group

    Hi ,
    I would like to know mainly three questions regarding the topic 'Talent Group'.
    1. How to create a talent Group in the backend system?
    2. Let know the transaction or report that generates the list of talent groups existing?
    3. Let know the transaction or report that generates the list of talents in a particular talent group?
    Thanks and Regards,
    Dinu

    Hello,
    Talent Groups are not meant to be created in the backend. The new SAP functionality with ABAP WebDynpro requires that you have portal and then you can deploy the relevant business package. The business package which you need to be able to create Talent Groups is 'Talent Management Specialist 1.40'. The backend WebDynpro application used is to create or edit HRTMC_TALENT_GROUP and there is a portal iView available for this. You will use this to create the required groups and they will be saved in 7420. This application will list all groups which have been created and you have been assigned as part of the support team. From the list you can edit, copy an exisiting group to create a new group, create new or delete a group. As a follow up to a review meeting you can then assign employees to the various available groups. Each group created is available in its own tab. When you click on the respective tab for each group, the list of asigned candidates will be displayed with theor current status.
    Eahc assignment to talent groups is always given together with validity. When you assign a talent to group, a new relationship '743' is created between the CP and TB objects. If then you want reports, you can do ABAP reports or queries to list the information from the infotypes with the required information based on requirement.
    Regards,

  • BAPI to Upload talent Group in HR Talent management and talent development

    Hello all,
      I am trying to create some talent group (in Talent management and talent development module) directly using ECC6 but not able to do the same. is there any bapi which we can use to mass upload of talent groups.
    I tried to put data directly yo infotype 7420 but its not the right way of doing the same.
    Mandeep

    not solved yet.

  • How to create Talent Group in Talent Management System (Infotype 7420)

    Hello All,
    Can anybody let me know how to create talent Group entries in SAP HR TMS module (infotype 7420).
    And one more thing if somebody know how to link application area for a user in TMS.
    Mani

    we have to do it through EP interface through BP TMS.
    1. connect EP to SAP system
    2. Configure all the iviews of TMS business package so it can communicate with SAP system (change only SAP system name for all iviews)
    3. Assign the roles to user of EP
    4. run application using TMS

  • Talent Management - Enhancing talent search

    Hi Leah,
    Chris' blog sure is great! I hope the below information is helpful.
    1) As far as I am aware you need to extend the Advanced Search so that you can use the same field again.
    2) I can't help here unfortuantely
    3) TREX uses one-to-one relationships when returning results so you will only ever get 1 (or none if there are multiple records!) result. This is set to change in TREX 7.2 from what I understand.
    Best regards,
    Luke

    Hi Erik,
    We meet again! The Advanced search should be available by default if TREX is configured and connected correctly. If the standard search works then TREX is connected correctly.
    You could try SAP note 1550930 (Search: Various corrections for the advanced search). There are lots of TMC Search SAP notes under PA-TM so I would do a search there. These notes might also be worth implementing:
    1378537 - TMS: Advanced search for managers returns incorrect results
    1421347 - TMS: Advanced search for managers: Managers are missing
    1423708 - TMC search: Delta indexing for authorization data
    1539110 - TMC search: Corrections u2013 combined search
    1548337 - Search: Enabling multiple selection (EHP 4)
    1561031 - Search: Various corrections for the advanced search #2
    There are also lots of other useful SAP notes that correct errors with drop-down lists, Functional Area search, form of address etc. I could write a whole blog on them...
    Good luck!
    Luke

  • Regarding Talent Management Infotypes !!!

    Hi Seniors,
    As,I am assigned to work on career and succession planning module... I would like to know about the info types 7400, 7410, 7402, 7403 .... etc.
    When to maintain these info types ?
    Where to maintain  info types?
    How to see these info types?
    Pls suggest
    Regards,
    Ritu

    Hi Ritu,
    The Portal is for the following applications:
    Talent Profile for Employees
    Talent Profile for Managers and Talent Management Specialists
    Talent Review Meetings
    Talent Groups
    Corporate Goals and Values
    Talent Assessment
    None of these processes can be managed in the SAP R/3 system. Therefore it is not possible to have a holistic end-to-end succession management process, since you can only manage succession planning of positions.
    For your search issue, have you installed and configured TREX? See this blog for information:
    Setting up NetWeaver Embedded Search (TREX) for SAP HCM Talent Management EhP4, 5 and 6
    Best regards,
    Luke

  • Talent Group Nominations

    Hello Experts,
    Have a question regarding the talent group nominations in the assessments vs the Talent Review Meetings (Talent Mgmt and Development Ehp6).
    Via MSS an employee is nominated for a Talent Group "Developer"- stauts shows as Developer (Nominated)
    Talent Review Meeting is set up where the talent is placed in the calibration grid based on PMP/POT scores.
    Talent is moved in the grid to a Critical Talent and the "Save" button is hit and the Approve button is hit. - The icon changed from the Nominated Icon to the "Approved Icon" however when you click on the details the status still says "Nominated".
    The TRM status is changed to "Complete".  The PMP/POT values update however the Talent Group for the TMS (Talent Information) still shows Nominated.  In MSS Talent Info in the Talent Group by the employee it says "Nominated" however in the Talent Overview detail under the employee name the status still says "Nominated".
    When does the talent group nomination from the TRM get displayed to the "Approved" status?  I know that the TMS can approve Talent Group nominations under the Talent Group functionality however I have the follow-up activity HRTMC_RM_FOLLOWUP_TALENT_GROUP where the
    it is supposed to provide the columns Talent Group and Status for the follow-up list and activates the relevant pushbutton however those pushbuttons aren't appearing on the follow-up tab.
    Any clarification would be helpful !
    Thank you

    Hi Luke,
    I checked in the system and it looks like the status are correct. I think the issue here are the BAdIs.  Here is what I have configured:
    Assign Talent Groups to the Boxes of the Calibration Grid - I have all of my talent groups assigned to the grid.
    Define Follow-Up Activities for Talent Review Meetings - the standard is populated with the following :
    SAP_PERFORMANCE - Update of Performance Document
    SAP_PERFORMANCE_POTENTIAL - Update of Performance Document and Potential Document
    SAP_POTENTIAL - Update of Potential Document
    SAP_TALENT_GROUP - Approval/Rejection of Talent Group Nominations
    BAdI: Activities When Approving Talents in Calibration Grid - HRTMC_RM_CONFIRM_ACTIVITIES is active
    BAdI: Follow-Up Activities of Talent Review Meetings - HRTMC_RM_FOLLOWUP_TALENT_GROUP - is active
    HRTMC_RM_FOLLOWUP_PERF_POT - is not active and in the Active (Impl) the check box is checked but greyed out.  We do not want the appraisal to be updated. 
    BAdI: Status Change of Talent Review Meeting - we've created a custom BAdI but aren't sure what this BAdI is used for.
    Our goal is that I want the Talent Group/Status to show up on the Followup Tab and I when a talent is moved in the TRM grid and the TMS hits "approved" for the talent groups to be approved automatically.  Is there a BAdI that we are missing or do we have something active that is conflicting with another BAdI? Right now the automatic approvals arent happening and the Talent Group/status tabs arent showing on the TRM follow-up tab.

  • Talent Group

    Hi,
    I am working on Talent management(Performance management),but the link is yet to be activated.I need to gather all the information present in each field.Can anyone pls send me screenshots for Talent group so that i can get an understanding about the fields present in it.It would be of great help to me.
    Can pls mail me to  [email protected]
    Regards

    Hi Luke,
    I checked in the system and it looks like the status are correct. I think the issue here are the BAdIs.  Here is what I have configured:
    Assign Talent Groups to the Boxes of the Calibration Grid - I have all of my talent groups assigned to the grid.
    Define Follow-Up Activities for Talent Review Meetings - the standard is populated with the following :
    SAP_PERFORMANCE - Update of Performance Document
    SAP_PERFORMANCE_POTENTIAL - Update of Performance Document and Potential Document
    SAP_POTENTIAL - Update of Potential Document
    SAP_TALENT_GROUP - Approval/Rejection of Talent Group Nominations
    BAdI: Activities When Approving Talents in Calibration Grid - HRTMC_RM_CONFIRM_ACTIVITIES is active
    BAdI: Follow-Up Activities of Talent Review Meetings - HRTMC_RM_FOLLOWUP_TALENT_GROUP - is active
    HRTMC_RM_FOLLOWUP_PERF_POT - is not active and in the Active (Impl) the check box is checked but greyed out.  We do not want the appraisal to be updated. 
    BAdI: Status Change of Talent Review Meeting - we've created a custom BAdI but aren't sure what this BAdI is used for.
    Our goal is that I want the Talent Group/Status to show up on the Followup Tab and I when a talent is moved in the TRM grid and the TMS hits "approved" for the talent groups to be approved automatically.  Is there a BAdI that we are missing or do we have something active that is conflicting with another BAdI? Right now the automatic approvals arent happening and the Talent Group/status tabs arent showing on the TRM follow-up tab.

Maybe you are looking for

  • Closing iTunes Concerns

    Hello, Just recently, when I close the iTunes application, I am getting an error report request. While the computer is saving the library I get the message, iTunes has encountered a problem.... When I go to what the error report contains it is this..

  • How to increase performanceof query based on Infoset?

    How to increase the performance of a query based on a Infoset? As per designing of query, all the necessary fields are placed where they are required.

  • Ipad mini to tv

    I plugged my 30 pin av cord into a lightning adapter then into my iPad mini...why do i get sound but no picture on my tv? is there a setting on the iPad to get the picture?

  • Bulk Collect Limiting data problem

    Hi all, i am using a cursor for migrating data form one table to another. i say: fetch c_mycur bulk collect into r_myrow limit 10000; exit when c_mycur%notfound; forall i in r_myrow.first .. r_myrow.last insert into table2 values r_myrow(i); But ther

  • Regarding deletion of firmed planned order

    Hi PP Gurus,              I want to delete the firmed planned order of header & component materials. Scenerio is after the mrp runs the planned orders are created and automatically gets firmed. Now sitation is that system contains the firmed planned