TalkTalk Fibre & Time Capsule

Hi All
I fully appreciate this has been asked many times but after looks at all the threads I cannot work out what to do!
I have had TalkTalk Fibre installed and using the Huwai router that came with it. However, I would like a stronger signal as in WIFI I am getting a poor reception in many areas, so I can either:
1. Use just the Time Capsule as my router
2. Bridge my Time Capulse to mirror the TalkTalk and increase range (I believe?)
My main thing is which is best, and if its option 2, then how do I do it step by step as I have done a hard re-boot on the Time Capsule but just cannot get it to communicate with the TalkTalk router.
Also, will I still be able to use the hard drive on it at the same time
FInally, I have my TalkTalk router in the dining room, then have an ethernet cable from that to a ethernet box near my TV. This then has the Time Capsule plugged into it with 2 ethernets (1 to the LAN and 1 to the WAN).
Am I totally wrong in my set up or can someone give me a 'dummies' guide to set it up?
Cheers!
Michael

Hi LaPastenague, hopefully you can help
I have set up a TC with a talk talk huawei router as you state above.  However, I sometimes receive an error messgae on my IMAC stating that another device is using the IP address and that I should try and access the web again later or talk to the system adminstrator. 
My set up is by using ethernet from the modem to the Huawei router and then ethernet to the TC WAN.  I am using a different wireless network name and password on the TC than is on the TalkTalk network.
I am having problems with my sonos music system losing access/connection to the TC server and so I am looking to resolve all the TC network issues before I can tackle the sonos issues and hopefullt one might resolve the other....

Similar Messages

  • Time Capsule y fibra optica

    Mi Time Capsule no funciona con la Fibra Optica de Movistar

    Mi Time Capsule no funciona con la Fibra Optica de Movistar

  • Will Time Capsule support  a fibre optic internet signal via a modem?

    Will Time Capsule support  a fibre optic internet signal via a modem?

    Thanks, really appreciate the prompt response. Have you also been "forced" by the installation of Mountain Lion to use the TC as your principal network router? If so, does this reduce the performance of your network at all?

  • Is the new AirPort Time Capsule compatible with a fibre optic modem?

    I will be having fibre optic set up in my new home.  The new AirPort Time Capsule states that it si able to connect to cable or DLS modem for internet access.  Will I be able to connect this device to a modem designed for fibre optic internet?
    Many thanks
    CS

    Yes. All it needs is a modem (cable, fiber, satellite, DSL) with an Ethernet output (not USB).

  • Bt Home Hub (fibre optic) can it work with my Time Capsule & Airport Express?

    I have just moved house after having no problems for years with my virgin cable I have now had to switch to Bt because cable is not available at my new address therefore I would like first and foremost to have my Time Capsule available to use as a hard drive, I am not too bothered about wi-fi as that comes from the bt hub, only thing is I am at a loss how the Time Capsule hard drive is not working. Also is there anyway the Bt Hub can connect/link to Time Capsule or even Airport Express.

    Your TC can be used bridged to the BTHub.. and plugged in by Ethernet.
    It is best to still use the TC wireless for the express to extend and you will find access easier.
    Always best to start with a factory reset when you do this.. The TC remembers too much from its last configuration.

  • Fibre broadband and Apple Time Capsule

    I wanrt to start using my Apple Time Capsule as my router, rather than the BT HomeHub.
    I know what cables go where, it's when I get to the AirPort Utility stage that gets a little confusing for me.
    I know you need to select PPPoE,
    I put my username in Account Name,
    I leave password blank.
    It is when I get to DNS Servers, I do not know what to put in there.
    I am running OS X Mountain Lion with all the lastest updates installed.
    Can anyone help?

    I tried [email protected] as my username but it would not work. It works with my username. It is all over the internet that you leave the password blank, otherwise if you put a password in, again it doesn't work.
    You do NOT get an option on the Time Capsule to have DNS set to auto. You only have the option to put in your primary and secondary DNS.

  • Time Capsule vs. Other Mass Storage Device

    I am a Mac newby seeking advice.  I recently purchased the MBA below to replace my personal PC.  My previous setup was a desktop with plenty of storage to handle my needs (including iTunes) and I backed up data directly to an external hard drive (I know pretty basic).
    After purchasing the MBA, I realized I do not have enough internal hard drive space to store all of my music and my current external drive is too small for all the media and backup of the MBA.  Also, the point of the MBA is to be mobile. Also, I would like my Sonos music system (with an application similar to iTunes) to be able to access the music library.  Lastly, I have far to many songs purchase outside of iTunes to use iTunes Match.  Therefore, I started seeking wireless alternatives to store my music and backup my MBA.  Although an NAS would probably be ideal, I have found out through trial and error that the basic systems do not work with a MAC and the only ones with a prayer are the more expensive ones (i.e. Synology and QNAPS).  Therefore, I have decided to pursue a more simplified approach.
    My Internet and TV provider is CenturyLink.  Their router is very basic with only 802.11g speed and without any USB ports.  The following configuration has been suggested to my by some more experienced Apple users to provide wireless data access and backup.
    Requesting CenturyLink provide me with a basic modem.
    Purchasing an Airport Extreme (or similar wireless n router with a USB port).
    Connecting the Airport Extreme (or other wireless router) to the basic modem.
    Purchasing a Time Capsule (or other mass storage device).
    Partitioning it using either the specific one for the Time Capsule (or Disk Utility for other mass storage devices) to provide one volume for my media and one for backup using Time Machine.
    Moving the media from my old external drive (which is catalogued with folders for each artist, subfolders for each album and the songs in the subfolders) by connecting the old mass storage device and Time Machine to my MBA and using Finder to do this (see the questions below regarding this).
    Moving/cataloging the media from the Time Capsule (or other mass storage device) by dragging it into the iTunes window.
    Connecting the Time Capsule (or other mass storage device) to the USB port of the Airport Extreme (or other wireless router).
    Setting up Time Machine to use the volume partitioned for backups.
    Possibly having to move cataloging files from my iTunes, Music folder to the external drive and pointing iTunes to the Time Capsule (or other mass storage device) through Preferences, Advanced to access the music.
    Overall, I am concerned with the total cost.  I just spent a lot of money, not only purchasing the MBA, but also the iPad 3 and upgrading my cell phone to the iPhone 5 (I skipped the 4).  It seems that by the time I purchase an Airport Extreme and a Time Capsule, I could also have just bought a NAS like the Synology 213 with 2 X 1TB drives, connect it to the existing wireless router via ethernet connections and have a more comprehensive solution.  Based upon these instructions and cost concerns (and bad experience), I have several questions related to this.
    Does this configuration and these instructions make sense, including those for moving and accessing my music files through iTunes (i.e. will it work)?
    Are both the Airport Extreme and Time Capsule necessary to make this work easily or can I purchase alternatives to either or each and if so, what is recommended?  If they are necessary, would you recommend doing this or buying one of the aforementioned NAS's to a Mac newby?
    Given the file structure for my music on the old external mass storage drive, can I simply move the folders over with the subfolders containing the musice files in them or do I have to literally enter into each subfolder, select all and move them subfolder by subfolder (i.e. album by album)?
    Am I missing something totally better and easier solution?
    I would be massively grateful to anyone who can provide some good answers, advice and guidance.  I am about to pull my hair out!!!!
    Thanks,
    WinoSkiBoy

    They both said about the same thing except the Apple Store business tech said to buy an Airport Extreme and just attach a partitioned external third party HDD to it.
    Except that is flakey for TM backup..
    http://pondini.org/TM/Airport.html
    And slow as the proverbial dog.. although I guess the dog is old.
    And totally inadequate as a media store or server.
    Apple's pricing is pretty cunning.. I really doubt you are going to find a cheaper unit to do both wireless and TM backups than the TC. And it is a perfectly good device to do that. It is good to have in the network. And Apple sure make their products work with other apple products.. so it does work better than other similar cost products.. although you miss a lot of features that Apple predecided for you.
    But I don't think anyone has the ideal solution to your problem. Apple believe in cloud. And if you have fibre internet that will work really well.. forks out your money and apple will store your stuff. But for the real world most of us do not have internet connection even a fraction of speed required. And it can be another decade before we will. We need a box that is half way between a TC and media PC, a file store and a NAS. Will Apple make one.. ?? I don't think so.. They believe in cloud..
    You can make the missing link one yourself. If you are so inclined.. A HP microserver running freeNAS can do TM backups and makes an excellent media store because it can do AFP. You can put a graphics card in it and plug it into your TV. You can use it with a airport extreme. But you will need a degree in Geek.. !! The synology is a preconfigured form of that.. No Geekdom required. Synology seems to have the upper hand.. this week.
    Let me make a suggestion.. Figure out if you are going to jump into the Apple way of doing stuff.. which is basically itunes on computer as a server.. and the whole network.. working as part of this.. so any media is pushed from a store in itunes.. whether local or internet..  if you want to do it that way.. getting something other than the air to run itunes is well worth it. That is what a NAS cannot do.. it cannot be a media player.
    Or you do hybrid.. ie you don't use put all your media into itunes, you use a bit of this and bit of something else.. As long as that can play files.. stored on NAS or even on the TC without the itunes requirement.. It won't be as pretty. But it isn't hard to get working.. as long as you accept this isn't going to be the perfect Apple solution.

  • My Time Capsule does not work with existing WiFi

    Following a question solved on March 24 by LaPastenague, but gone bad again.
    Apple AirPort Time Capsule
    I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
    I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
    Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured,  but then it works.
    The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
    So, I am curious if you have any idea ?
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

    I can deal with the last question first and easily.
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
    Open the airport utility .. go to the disk tab and select erase.
    When you select erase you will get mulitiple options.
    Quick removes the file table but does not delete the files,, it takes 2min or less.
    A Zero out data is the secure way,, by writing 0 ie low level drive format.
    It can take several hours..
    7 pass will take a week.. not recommended..
    35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    The fact that it did work and has now failed might point to faulty unit.
    The only way to tell is reset it properly to factory and start over.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
    Remember to keep all names short, no spaces and pure alphanumeric.
    Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

  • How can I set up my time capsule as the primary base station with a centurylink router? I'm trying to extend my coverage, increase signal strength, and be able to connect a printer.

    I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?

    The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
    You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
    Is your broadband cable or adsl or fibre or ???
    If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
    Setup the TC in DHCP and NAT mode.. (depending on broadband type).
    You must reset the TC to factory to do the setup.. no files are lost at all.
    Here is my current recommended setup.. with Yosemite life has become harder than ever.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    This user has had success and a few others as well.
    RáNdÓm GéÉzÁ
    Here is why Yosemite has fundamental issues.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • Time Capsule timeouts when accessing secure web pages, downloading apps, backing up to iCloud, etc.

    Last week I upgraded my broadband connection to fibre, requiring me to install a different router because the Draytek one I had in place was not suitable, so I went for a Time Capsule.  My other devices are a 13” MacBook Air, an iPad 2 and an iPhone 4.
    Web browsing performance was immediately fantastic, with consistent readings on the Mac of 12ms ping, 35Mbps+ download speed and 1.5Mbps+ upload speed.  One oddity I did notice when running a speed test (using speedtest.net), but which I didn’t think about much at the time, is the time taken between finishing the download test and starting the upload test.  In my previous experience there would be only a few seconds between them, but on my new fibre connection through Time Capsule it takes anything from 30 seconds to a minute for the upload test to begin.
    However, a few days ago I tried to download some app updates in iTunes to the Mac, but after a wait I received a message that the network connection had timed out.  I tried again multiple times and each time the result was the same.
    I then Googled the problem to see what might be causing it, but I found I was not able to access any results from the Apple Support Communities pages because the browser would time out with a network connection error, or they would take an absolute age to load. Subsequently, I have also discovered that I cannot backup my iOS devices to iCloud (it tries for ages and then says there was an error), I cannot log in to any online accounts (the browser eventually times out with a network connection error) and I cannot send email from the mailbox that syncs with my work Exchange account.  I have also realised that the Apple Support Communities pages are secure, so the common theme seems to be there is a problem accessing anything that requires security/authentication/encryption.
    This is not a Wi-Fi issue as it is the same when I switch off Wi-Fi on the MBA and attach it to the router via an Ethernet cable.
    It is also not a Mac/iPad issue, as both function normally on my work Wi-Fi network.
    I have reached the end of my limited technical tether, so does anybody have any suggestions please?

    Hi,
    Many thanks for taking the time to respond.
    Bizarrely, after more than a week of problems and time wasted in trying to resolve them, I arrived home from work today to find that everything is working perfectly. The network is exactly as it has been all week and when I called my ISP they said they had changed nothing on the line, so it's a complete mystery.
    I'm happy it's working, but it would have been nice to understand what caused the problem, just in case it happens again.
    Anyway, thanks again and sorry for wasting your time.
    Gareth

  • How can I reconfigure an Airport Timecapsule and Airport Extreme Base Station to extend a new Time Capsule 3TB network.

    Previously they were configured to be part of a network attached to a cable modem.  Now I have a DSL modem.  I can get the 3TB Time Capsule tower to be recognized by my AirPort Utility but cannot get the older 2TB Time Capsule and Extreme Base Station to be recognised as wifi extensions of the 3TB Wi-Fi Base Station.     This latter base station is set up in Bridge mode and the wifi is switched off on the DSL Modem.     I am trying to recreate a home network (I have created a newly named one) and use the Apple products as the wifi routers, leaving the fibre optic-supplied DSL modem to interface with the internet.
    I would have thought that I should set-up the 3TB Time Capsule Base Station in DHCP network mode, but trying to do so gives me error messages and renders the network inoperative.   Does anyone have any suggestions as to how to get the AirPort utility to recognise the two other devices (Base Stations) as extensions of the main one?    I have tried with RJ45 cabel connections to no avail.

    First, it would be wise to update your computer to OS X Mavericks. It's just a free update, but it really helps your computer.
    Once you've done that, on to the fix.
    In Airport Utility, select the old router and click "edit". Click the Wireless tab. Select Off. Click Update, and wait. During the update, you should use your phone to read this, as you may have no wireless for a time.
    Once the update is done, click the new Time Capsule and click "edit". Select the wireless tab, and change the Network Mode to "Create a Wireless Network". Choose your name, security and password. Click Update. Once the new Time Capsule is plugged in and wired, you should be able to connect to your network from your laptop.
    Back on the old Time Capsule, go to the Wireless Tab and select, "Extend a Wireless Network". Select your network, and click update.
    On the Airport Extreme, do the same as the old Time Capsule.
    You should be done! Now, you can move your old Time Capsule somewhere else as use it as an extention of your network. And the same with the Airport Extreme. Enjoy your 5TB of network storage!

  • I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

    I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
    Narmin

    I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
    In the title you state.
    From my interanet I can access srvr but not from my home.
    Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
    In the first post you state,
    I can access windows server from within interanet but don't know how to access it from internet.
    Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
    But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
    I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
    And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
    1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
    2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
    There are lots of references to port forwarding in the TC.. eg
    http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
    The things that generally go wrong are firewall on the computer that is accepting the port.
    The ISP doesn't allow connections on a particular port. (not likely in your case)
    The router is behind another router.. double NAT will kill any port forward.
    Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
    IP on the receiving device is not static and so changes.
    Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

  • Time Capsule: IPv6 works, but IPv4 does not

    I have a Time Capsule (running 7.7.3) and a Mac Pro (2010, running 10.10.1) connected via ethernet. My ISP (Webpass) has IPv6 support.
    The Mac Pro can communicate over IPv6 (e.g. ping6 google.com works; I can load google.com over IPv6 using Safari).
    However, IPv4 does not work. The Mac Pro isn't even getting an IPv4 address via DHCP from the Time Capsule.
    I'm pretty sure I have my IPv4 configuration correct in the Time Capsule, because if I turn on wifi on the Mac Pro (using the Time Capsule as my base station), the wifi interface gets an IPv4 address, and can reach the Internet over IPv4.
    Possibly relevant: 3 days ago I noticed that IPv6 wasn't being routed properly by my ISP, so I filed a trouble ticket. They fixed it 2 days ago, which is when my wired IPv4 networking broke. (Given that I can use IPv4 via wifi suggests that the problem lies with the Time Capsule).
    I have tried rebooting the Time Capsule and different ethernet ports on both the Time Capsule and Mac Pro, to no avail.
    How can I get wired IPv4 working again?

    I wish you were running anything but yosemite on the computer as it is least reliable networking OS yet.
    Factory reset the TC. Redo the setup.. please use all short names, no spaces and pure alphanumeric.. do not use the names apple wizard will recommend.. keep passwords also 8-20 character pure alphanumeric but mixed case and numbers.
    In ethernet setup of the computer.. how have you got ipv6 set??
    How is ipv4 set?
    Have you tried static address in the Mac?
    What sort of broadband is this?? If there is a modem what sort? And what mode is the TC running in?
    One of the strange things that can happen.. with IPv6 you can use TC bridged to a fibre connection..
    But for ipv4 to work it must be set to DHCP and NAT in the network tab.

  • Can time capsule be use simultaneously as a wireless hard drive and time machine backup?

    Hello, I currently have a macbook pro retina and have about 600 gig of content. I am tired of hauling around an external hard drive with him to hold it all. I was thinking of getting a Time Capsule but wanted to know if it can serve as both an external hard drive for my content as well as the destination disk for a time machine back up. If not, can I attach an external hard drive to the time machine to use as the backup drive. Oh one more thing, will I only be able to see the content if I connect to the same home internet network or will I be able to access it with any internet connection regardless of where I am??

    Hello, I currently have a macbook pro retina and have about 600 gig of content. I am tired of hauling around an external hard drive with him to hold it all.
    Who is him?? The MBPr.. interesting choice of pronoun if it is.
    Do you really need 600GB of content.. ??
    You can buy a 1TB 2.5" drive in a tiny holder now. In terms of the amount of lugging.. I doubt you will feel that much extra.
    I was thinking of getting a Time Capsule but wanted to know if it can serve as both an external hard drive for my content as well as the destination disk for a time machine back up. If not, can I attach an external hard drive to the time machine to use as the backup drive. Oh one more thing, will I only be able to see the content if I connect to the same home internet network or will I be able to access it with any internet connection regardless of where I am??
    We do not recommend the TC as an external hard disk to store your files. It has no.. repeat NO ability to back itself up.. it is a sealed unit without spare parts available.. If it dies.. apple will replace not recover. Say goodbye to all your files.. and frankly that are not that reliable.
    TM cannot backup a network drive.. and you cannot backup without using a 3rd party software and another USB disk or NAS.. so.. to cut the long story short.. buy the right box.. a NAS.. QNAP and Synology make real NAS, with fully integrated backup that can do TM backups.
    If you do decide on the TC for your files.. you can access it locally no problems.
    From WAN over the net using BTMM and iCloud.. remember every file movement is restricted to the slowest speed in the network.. usually your upload speed at each end.. try doing anything at 800kbps which is all most people get. If you have high speed fibre then great.
    A real NAS will be accessed by SFTP directly using dynamic dns or static public IP .. even better.. but the same limitation applies.. speed of the convoy is the speed of the slowest ship.
    A dropbox in the cloud is often a better way although accessing 600GB is still not easy.. and getting it up there.. harder still. But download speed is a lot better than upload.

  • Why can't I use wifi on my time capsule after putting in a static ip address

    We were assigned a static ip address, but when I enter it in the time capsule, wifi stops working. What's going on?

    So do any computers get internet now?
    Where have you put the static IP.. ? Please post a few screenshots. If this is your public IP just xxx out the last few digits.
    Is the DNS and gateway actually correct and working?
    Is this a fibre service? You still haven't answered the fundamentals..
    The TC will have issues with any setup where the gateway address (what Apple call router) and the IP address are not in the correct subnet. This is a problem that often happens with fibre. Other OS like your computers are not affected, so when plugged in directly work fine.. but the TC is strict.. it must have the network correct or won't work.

Maybe you are looking for