Tamil letters not appearing correctly in photoshop and illustrator

Hi!
I have an issue when typing tamil in photoshop, illustrator and after effects. Most tamil letters require a combination of two letters on the keyboard. However, when "உ" or "ஊ" is used in the combination, the letter doesn't appear correctly (two examples as shown below). It would be great if someone could help me with this and thanks in advance!

I have the same issue in Illustrator.
Spent some time with the support folks today. Looks like eastern fonts are not fully implemented, contrary to claims.
Try using "Latha" font, it seems to not have that issue.

Similar Messages

JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

(Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
Re: JPG images not displayed correctly in Bridge and Photoshop

xxxxyyyyz wrote:
…If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
Just get it it out of the way, here's my setup:
Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve. Unequivocally and without qualifications.
Now, first things first: Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites". Concentrate on Photoshop. Do not try to use Bridge to synchronize anything.
The "suites" are a totally artificial construct created by Adobe bean counters and marketing types. The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries. They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
Enough said about the cause of the problem. The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
Secondly, a disclaimer: I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius. I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point). I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it. I believe my monitors are the foundation of my color management efforts.
Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle.
Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software. Stick to version2 icc profiles. Ask the manufacturer of your calibration software/hardware if in doubt.
Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site. I have learned from all of them.
My working color space is ProPhoto RGB. I choose to work with PSD and PSB files. As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web. My main output consists of prints.
I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
Following is a screen shot of some of my pertinent settings:
Note that I have never bought into the "suite" concept myself. I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
One big caveat, do not fall into this trap:
xxxxyyyyz wrote:
…I believe my problem has nothing to do with my monitor profile, for several reasons, but…
…It seems extremely unlikely to me that…
You either want to learn, or you don't. You either want to solve your problems, or you don't.
When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere. That attitude will get you there fast. Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong. You see, I am not experiencing any problem that needs fixing. I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
Good luck.
Wo Tai Lao Le
我太老了

Accents not appearing correctly in Safari

I'm having a problem where accent marks in webpages are showing up as symbols like this
BenoÃ®t XVI exhorte les jeunes Ã "ouvrir leurs coeurs Ã Dieu" - 23 minutes ago
Le Polisario libÃ¨re ses derniers prisonniers de guerre marocains - 23 minutes ago
Le Groenland va limiter la chasse Ã l'ours blanc, victime du rÃ©chauffem
I tried changing the encoding from western but it doesn't help. the unicode makes the accents appear correctly but the english doesn't always appear correctly. IE and Netscape show the text correctly. Any suggestions? Thanks for your time

Could you send me a screenshot of an example where the accents are OK but the English is not when using UTF-8 encoding? Also an example URL? Click on my name for the address.

Extensions not showing at all - Indesign CC 2014 - but shows in Photoshop and illustrator

Hi Hallgrimur Bjornsson,
Extensions not showing at all in Indesign CC 2014 (see screenshot) - but are showing in Photoshop and illustrator
Have tried to remove ExMan.db file and restart Extension Manager (v. 7.3.2.39).
After install, the extension correctly shows in
~/Library/Application Support/Adobe/CEP/extensions
In CC folder - there's one extension (Adobe Mini Bridge)
~/Library/Application Support/Adobe/CEPServiceManager4/extensions
Have tried to uninstall and reinstall InDesign CC 2014.
There is only CC 2014 version of the applications installed.

Is Extensions available as a menu item under Edit > Menus...
If it is, is it marked as visible?
If it is not, uninstall, run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 ) and reinstall.

Website suddenly not appearing correctly in Firefox under Windows 7

I've had a website running for a couple of years now with no problems, but one of my clients sent me an email saying it's not appearing correctly on her system, Windows 7 runnning Firefox v. 15. I am on a MAC and have looked at the site on 4 different browsers and it looks fine, I also installed Firefox (v. 16) on a PC running Windows 7 and it looks fine there. Near as I recall I haven't made any changes to the site's structure, so I'm stumped. The website is http://www.horizonwings.org. Can anyone help? I've attached a couple of screen captures showing what she sees. Thank you.

I see the same problem as your client in Firefox 16 on Windows 7. To fix the problem, add clear: left to the style for leftColMain
#leftColMain {
    clear: left;     float: left;
    padding: 30px 0 0;
    position: relative;
    width: 210px;

Navigation Drop Down Menu Does Not Appear Correctly with Internet Explorer.

Website was designed with Dreamweaver CS5 on a Mac. The navigation drop down menu does not appear correctly with Internet Explorer. When you mouse over a navigation option that has a drop-down menu, the drop-down portion appears on top of the first level. Hope someone can help me out.Thanks!
http://www.catchaghosttoursofkansas.com

Hi,
and you should then iron out this minor inaccuracy, which I found in your source code, for example here:
<div align="center"><a class="MenuBarItemSubmenu" href="hays.html">HAYS</a>
        <ul>
          <li><a href="hayswalkingtour.html">Walking Tour</a> </li>
          <li><a href="forthays.html">Fort Hays</a></li>
        </ul>
All your "first" entries have to show a '#", like this:
      <div align="center"><a class="MenuBarItemSubmenu" href="#">HAYS</a>
        <ul>
          <li><a href="hayswalkingtour.html">Walking Tour</a> </li>
          <li><a href="forthays.html">Fort Hays</a></li>
        </ul>
      </div>
after that you can link to the individual subgroups. See here e.g. (screenshots from my German DW):
Hans-G.

Buttons do not appear correctly in Firefox

My company uses IE 7 as their standard browser within the company. I am developing an extranet application so that the public can access my company's information. Since APEX supports both IE and Firefox, the application needs to appear the same in both versions. Everything looks fine except for the buttons.The buttons in my applications appears correctly in IE 7 but it does not appear correctly in Firefox 3.5.5.
You can access my application via the following link:
https://miniprofile.panynj.gov/pls/apexcfp8/f?p=120:1
Can someone assists please. I will forward you the customized CSS and templates that the application references via e-mail, if needed.
Thanks in advance,
Robert

Hi Robert,
According to FireBug, the following style in the PA_t15WL class is causing the problem:
background-position:0 50%;If you remove this, the button displays ok in FireFox - not sure what effect it has on IE7, though
Andy

Help with indesign epub not appearing correctly on ipad

Can someone please tell me why my epub does not appear correctly when viewed on my ipad? It seems to push like a quarter of my full page image onto the next page. I don't want it to do this! I want it to looks like it does in ibooks on my mac.
See the links to below images that show how it looks on indesign, ibooks and ipad.
https://www.flickr.com/photos/118558552@N02/15536244571"
"https://www.flickr.com/photos/118558552@N02/15352308439"
https://www.flickr.com/photos/118558552@N02/15538941145"
Thankyou for looking, and I hope someone can answer!

Check this thread regarding the same issue and see if some of the suggestions there help you: IMAGES cut off when converting to epub

Horizontal Spry Submenu does not appear correctly in IE

I am building a site in Dreamweaver CS5 and my spry submenus do not appear correctly in IE.   I work on a mac, but have been checking my work on a pc.   I have tried looking through other posts and have made some corrections (I at least got the submenus to appear vertically instead of laterallly in IE) but still have two problems:
   * The submenus are shifted to the right rather than aligning under the menu headings
   * One one menu (Attorneys) the submenus appear above, rather than below, the menu heading
Here is the website and I am really hoping someone can help! I've spent several hours trying to figure this out with no luck.
http://webdesign.protas.org/olg/English/olg%20eng.html

1. Especially IE takes offence to the DOCTYPE declaration not being on the first line
2. There is no end tag for the HEAD section
3. Your use of the Library Item for the menubar is not correct
Please have a look here http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwebdesign.protas.org%2Folg%2FEngl ish%2Folg%2520eng.html
Gramps

Websites do not appear correctly.

After about a few hours of being on the internet (continuously or not), web pages will start to not appear correctly. The only way I have found to fix this is to clear the history. (Cookies, cache, etc.) This is only a temporary fix though and I would like to not have to do this every few hours when I'm in the middle of something. I haven't been able to find anything else on this at all besides the temp. fix of clearing the cache.

If you use extensions (Firefox/Tools > Add-ons > Extensions) that can block content (e.g. Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that such extensions aren't blocking content.
You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

i have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

I used the ColorSync utility to verify, and it came back with this report:
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/ICCProfiles/SPR800 Standard.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
   Tag 'desc': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/ICCProfiles/Standard.profiles/Contents/Res ources/Epson IJ Printer.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/
I did not know what to do next. At the bottom of the window it said to go to www.apple.com/colorsync to find a tutorial. I got a message saying that link does not work. Tried to find the tutorial by searching at apple.com, but could not seem to locate it. Does anyone know what the report above means and what I should do about it?
Also, how to find that tutorial?
Re Using RGB all the way through, When I print from Photoshop Elements, I select Adobe RGB, Photoshop Manages under "Color Handling", Relative Colometric under "Intent" and "ColorSync" i the Epson printer box. Do you mean to do something different in this sequence?

Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB

Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,

yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB"   (usb device tree)
USB Bus:
Host Controller Location:          Built In USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0026
PCI Revision ID:          0x0000
PCI Vendor ID:          0x106b
Bus Number:          0x18
Hub in Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x1002
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version:          0.0e
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Imation
Product ID:          0x0002
Vendor ID:          0x0718
Hub in Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x1002
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version:          0.0e
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Imation
Product ID:          0x0002
Vendor ID:          0x0718
USB Bus:
Host Controller Location:          Built In USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0026
PCI Revision ID:          0x0000
PCI Vendor ID:          0x106b
Bus Number:          0x19
LaCie d2 DVDRW USB:
Capacity:          451.76 MB
Removable Media:          Yes
Detachable Drive:          Yes
BSD Name:          disk2
Version:          0.00
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          LaCie
OS9 Drivers:          No
Product ID:          0x1011
Serial Number:          FFFFFFFFFFFF
S.M.A.R.T. status:          Not Supported
Vendor ID:          0x059f
LaCie d2 DVDRW USB:
Capacity:          451.76 MB
Removable Media:          Yes
Detachable Drive:          Yes
BSD Name:          disk2
Version:          0.00
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          LaCie
OS9 Drivers:          No
Product ID:          0x1011
Serial Number:          FFFFFFFFFFFF
S.M.A.R.T. status:          Not Supported
Vendor ID:          0x059f

The email sent from macbook do not appear in my iphone and yahoo account

the email sent from macbook do not appear in my iphone and yahoo account

thanks for your help... I was feeling frustrated because the sync problem, but with your suggestion all contacts are now on my iPhone. _Thanks once again_.
I think that I was asking two different questions at the same time, because the problem with the iPhone synchronization was solved, but the .Mac Address Book still has no new contacts... just the contacts before the Mac OS X update to Leopard. I guess that I will need to look for help in other discussion topic.

"Non rectangular objects will not appear correctly when exported using CSS."

I am using Ind CC 2014 exporting a document to a reflowable epub. The document contains an .ai image. The image exports correctly in some parts of the.epub but not others, where it is distorted. There is a warning on export :"Non rectangular objects will not appear correctly when exported using CSS." Any suggestions appreciated.

Thanks!
>
"Non rectangular objects will not appear correctly when exported
using CSS."
created by pooja2087 <https://forums.adobe.com/people/pooja2087> in
/InDesign EPUB/ - View the full discussion
<https://forums.adobe.com/message/6886892#6886892>

There is some font labels that do not appear in adobe acrobat and appear in the reader " appear as

there is some font labels that do not appear in adobe acrobat and appear in the reader " appear as boxes" and I need to work with the acrobat can any body help

I don't know if your on a Mac or a PC.
So you need to locate the Font cache file for Acrobat (make sure Acrobat is quit) and remove to Trash/Wastebasket.
and empty. The open Acrobat back up and the font cache file should rebuild. If your on a Mac the simpliest way is use a Utility called fontnuke and have it remove all Font caches.
Font cahces frequently corrupt as they are in constant use. Mayb Windows machines have something similar as Font Nuke.

Tamil letters not appearing correctly in photoshop and illustrator

Similar Messages

Maybe you are looking for