Tango , FaceTime blocked !! Any value for money VPN in Middle East ?

Hi
I'm using iPhone 5 iOS 7 all legit no jailbreak
I live in the Middle East
Tango , true caller and FaceTime are blocked
I need something to make video calls
Am thinking of going the VPN route
What are the good value for money options and will they be strong enough for video calls ??
Thanks in advance
Regards

I know it's created and published by carriers. I met a few working at Ooredoo Qatar who told me how everything works with Apple, And that is why I suggested this fix. Apple wont need to modify the current carrier bundles, or even notify them.
Countries where FaceTime is blocked as KSA and UAE already have "AllowVOIP" available in their carrier bundle and set to off, my carrier in Qatar has it set to on and that is why I have FaceTime. T-Mobile doesn't even have this field and that is why I lose FaceTime once my T-Mobile US SIM is inside. All Apple needs to do is enable FaceTime by default and only block it if asked specifically to do so by the "AllowVOIP" field.

Similar Messages

How to find Blocked Stock Value for a Material Division

Hi Every Body,
I have gone through the notes 589024,637927 to find out Blocked Stock value for a Particular Material at different plants . But I have to get Blocked Stock value at each Material Division . Kindly give some light on it to get it.
The steps are same for finding the Consignment stock value and Transit Stock value. So kindly help me if any body has already worked on it.
With rgds,
Anil Kumar Sharma .P

Hi Anil,
well these notes work but they're prerequisites that have bothered me and unabled me to fulfill our requirement, for instance, having the material number in the drilldown and so on in order to perform the calculation during query execution.
I believe there is not much more alternative if you still want to calculate valuations accurately at SLOC or any other stock indicator during query execution...
I started from the basic fact that valuation of material underneath the plant/valuation area (in my case 1 PLANT = 1 VALAREA).; precisely because all movements doens't carry all information as per the note explanation.
So what we have done is to pull a cube with all Article/Sites MAP values; this can be done in several ways; MBEW/MBEWH are holding MAP values per fiscal periods; it has sufficient for us until now: our operations are asking to track MAP values more frequently.... So I am investigating how to work this out and have several alternatives:
- MSEG has additional fields (available in the extract structures) like Total Stock Qty/Value PRIOR the posting. There is as well an indicator telling if the posting is relevant for the valuation (if it is going to affect the Qty/MAP or not). So it is possible to get the MAP after the posting for each material movement.
- Create a change pointer on MBEW/MBEWH.
- MKPF has two convenient fields (CPUDATE and CPUTIM) from which we could build our own delta extractor tracking MAP changes
In BW the Idea is to have a cube registering the Article/Plant valuation in time (non-cumulative) and then fulfill our queries via a multicube...
hoping this will help you in solving your issue; I am of course following any topic in this matter so would appreciate your input....
Olivier.

Bad app like to block any member for no reason

Beetalk is bad app like to block any member for no reason ... i think they just want any user send message from many mobile number to make new account and earn money from this ...beetalk never say anything before they block an account ... really bad app and any comment from www.facebook.com/BeeTalkThailand?fref=ts all so

I'm sorry but I don't understand. What is your technical support question?

Jelly Bean update for Xperia go in Middle East

Hello,
im not sure if Jelly Bean update for Xperia go in Middle East is available.
cause im trying to update my phone from ICS to JB using [PC Companion and sony update service] an message appear says that [you already have the latest update].
can anyone confirm that jeally bean not available in Middle East ?

here is an alternative if you MUST have the update right now
http://talk.sonymobile.com/thread/41609
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Match code in report selection screen does not show any values for 0FISCPER

Hi Experts,
I have problem with selection screen in several reports. When I use match code for fiscal period selection I get only # as a possible value. I have checked the master data they seem to be correct. I work with 7.0 BW system. Can you please give me any hint what I should check?
Thank you,
Michal

Hi,
maybe I ask different way - how do you add characteristic values for a characteristic in the BEx? Is it automated somehow in SAP (e.g. from master data)? For the fiscal period I use custommer exit to fill in the default value, which is the current fiscal period. But this is something different, right?
<removed by moderator>
Michal
Edited by: Arun Varadarajan on Nov 14, 2008 3:55 PM

Need facetime for Iphone bought in Middle east, using in India

Hi Team,
I bought my iphone 4S in Middle east and hence I cannot use facetime in my phone. Now that I moved back to India, how can I activate the same. Please suggest.
regards,
Prakash

If you purchase an UNLOCKED model from an Apple Store in the US it will work but probably not with LTE if available in your area.
You will have no warranty coverage in India.

Desperately need a regionalise reset for printer purchased in middle east

Hi,
I have a HP Photosmart C6283 All-in-One printer that i purchased 2 years back when I was in the middle east. We have now moved to the UK and I find I cannot get the same cartridges here (No. 177). After checking on this forum, I was told that I would have to get a regionalisation reset for my printer to reset it to this region.
I have called HP Customer Support and Technical support many many times. I'm either told that they do not support Photosmart printers at the number i have called or I get a recorded message to check on their website. Alternatively,if I need to speak to a person, I'll have to purchase a care pack starting from 15.99, which is outrageous. I've checked online, and it tells me that my product is not available in this region and I should search in the region where I have purchased it. That is my WHOLE problem !!!
Can somebody please help ? Will I have to pay somebody just to use my own printer ?
This question was solved.
View Solution.

You will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work. HP's web page on the subject is here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How can i know the price for iphone s5 in Middle East in Oman

hi..
please help me
i want to buy an iphone 5s. how can i buy it from apple store?
how can i know the real price for my country, aware that i am in Middle East exactly in Oman?
and how many time it will take to reach in my country Oman?
please help as soon as you can..
thank you

As I said, if you want to buy it from the USA online Apple store, you will need to have a credit card issued by an American Bank or financial company, you will have to have a USA billing address associated with that card, and you will have to have it shipped to a USA street address.
Aramax is a shipping company - you do not have a credit card from them and they cannot pay for your purchase. Having an account with a shipping company doesn't provide you with a USA source of payment for your purchase.
As I understand it, the Oman government does not allow the iPhone to be sold in Oman, there are no official service providers for it, and thus there is no legitimate source to buy an iPhone from within Oman.
Online Apple stores do not allow payment by foreign means or in foreign currency, they do not do currency exchange, nor do they ship internationally.

Best value-for-money 3G broadband provider in Sydney?

Hi,
I'm shopping around for a 3G BB provider in Sydney. Telstra appears the obvious choice, but is there a better-value provider else where? I have the Ericsson F3607gw adapter on a Satellite T130 / 02M, and I think it's on the 850MHz band (based on on-line specs). However, I seem to recall that the ad from JB Hi-Fi then (July2010) also mentioned 2100MHz.
Can someone pls advise the actual bands this adapter can use (can't find it on the laptop), what is the top speed (and is there a way to increase throughput), and a reliable provider. Expected usage is around Sydney Metro. OS is Win7 Pro.
Many thanks for any help.

Telstra usually have good speeds but you pay extra for that speed, and I believe the F3607gw is 7.2mb/s max anyway.
3/Vodafone seem to have some good deals right now.
Here is a list of deals from various providers:
http://broadbandguide.com.au/
Also have a look on this discussion board:
http://forums.whirlpool.net.au/

Is there any value for free storage requirements to SQL Server 2K8 R2 to run?

Grettings
we have a SQL Server 2K8 running on a Server that has less than 10GB of free space.
Do we have a problem with that? what is the storage requirements to SQL keep running normal?
Thank you in advance

Hi LmmLopes,
If you are talking about 10GB free space on the primary drive I think you should be able to run your SQL server without any issues.
Please find the chart below for the Hard disk requirements.
Hard Disk Space Requirements (32-Bit and 64-Bit)
During installation of SQL Server 2008, Windows Installer creates temporary files on the system drive. Before you run Setup to install or upgrade SQL Server, verify that you have at least 2.0 GB of available disk space on the system drive for these files.
This requirement applies even if you install SQL Server components to a non-default drive.
Actual hard disk space requirements depend on your system configuration and the features that you decide to install. The following table provides disk space requirements for SQL Server 2008 components:
Feature
Disk space requirement
Database Engine and data files, Replication, and Full-Text Search
280 MB
Analysis Services and data files
90 MB
Reporting Services and Report Manager
120 MB
Integration Services
120 MB
Client Components
850 MB
SQL Server Books Online and SQL Server Compact Books Online
240 MB
But if you are talking about the 10 GB on the entire server. Then you need to consider the database size and its expected growth.
You can consider adding additional disk drive and use it to store the data files.
Hope this answers your question.
Regards
Sathish S N

NVDIA compatability? Value for money?

I have a Hybrid SSD and was thinking of buying an NVDIA card to speed up rendering in After Effects.
Which is the best to buy. How much faster do they enable rendering. Are they stable? Easy to fit? Any known problems?
If you know about a good article on the subject or have first hand experience - do let me know.
Thanks

I think your best bet is
A) Barefeats - has done a lot of tests to try to answer
B) MacRumors - they are always debating the topic!
Is there a perfect solution? maybe not. In some cases dual GPU has been shown to help. Some use to use an ATI for displas and GTX (285 or 470 etc or Quadro 4000) for rendering.
2010 model has best, you have t o watch for power supported if you get beyond two 6-pin aux cables and 225W.
http://forums.macrumors.com/forumdisplay.php?f=1
http://www.barefeats.com has these benchtests
September 13th, 2013 --
CRAZY FAST GPUs for Mac Pro: GeForce GTX Titan and 780
May 10th, 2013 -- Do the newest GPUs run faster on the 2010 Mac Prothan on the 2009 and 2008 Mac Pro?
April 26th, 2013 -- PART THREE: EVGA GeForce GTX 680 Mac Editionversus the 'Sharks' (insane GPUs like the GeForce GTX 580 Classified and GTX 690)
April 18th, 2013 -- PART TWO: EVGA GeForce GTX 680 "Mac Edition"Versus Past and Present Mac GPUs running Pro Apps
April 16th, 2013 -- PART ONE: EVGA GeForce GTX 680 "Mac Edition"versus Past and Present Mac GPUs running OpenGL accelerated Games and Benchmarks

Value for money?

Hi,
Will I notice a significant difference between running an i5 4460 pc with an nvidia 750ti 2gb graphics card and an i7 4790 with the same card?
The i7 will cost approx £100 more. Will the i7 save me hours when it comes to rendering/exporting or just a few seconds/minutes here and there?
Thank you

The difference would be huge, get the i7. The i5-4460 has 4 cores, but no Hyperthreads. In addition to having a faster clock speed, the i7 CPU you mention supports Hyperthreading and therefore doubles the cores to 8 that are available for Premiere Pro.
Regards,
Jim

No value for money

i purchased new asha 230 by paying 3600. But it does not support hike messenger,telegram and other social apps...ram64mb . But my purchased micromax bolt by paying 3500.... It has all things such as android,512 ram,front cam,gps,3g..etc... And also '1' year warranty..
Y Nokia produced costly phones?????? Any knows the ans...??

While I'll agree that Nokia's Asha devices were pretty dull on the VFM factor as they lacked many of the features, most appropriately the well developed apps. But the pricing can't be compared to companies such as Micromax. As with every big company, there are a lot of costs associated with the production, sales and support and they need to be covered from what you pay.

Custom Report Not fetching values for parameter of report (Valueset not pop

Hi,
I am running custom report on Oracle application R12. This report parameters used standard value set for fetching purchase order number. The value set is not populating any values for the custom report. but for the standard report where this valuse set populating proper result.
It's bit Supprising ...the same valuset populating values for standard reports but not for custom report developed by me.
Value set query using table valueset and getting values from po_headers (View)
Thanks

Hi All,
Luckily I have been able to rectify the problem !
I tried retrieving the output using LISTCUBE to show the SID of the InfoObject also for which I was unable to get the data. After the report successfully gave the output for those I/O, I checked again I could see the data in the I/O maintain master data !
It worked like magic to me !
But I could guess that since it is a virtual I/O therefore it is not able to retrieve the data from the table directly and is able to do that only after the SID of this I/O is retrieved.
(If a characteristic does not have any master data, the values from the SID table are displayed for the "Values in Master Data Table" mode.)
Closing the thread !
Regards
Shalabh

Tango , FaceTime blocked !! Any value for money VPN in Middle East ?

Similar Messages

Maybe you are looking for