Tape backup through DB13
Dear Experts,
I want to take offline and online backup into tape but when I initialing tape drive through DB13
which parameters require to take backup on tape
Job started
Step 001 started (program RSDBAJOB, variant &0000000000035, user ID BASIS)
Execute logical command BRBACKUP On host BWDEV
Parameters:-jid TAPIN20140805161238 -u / -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.40 (10)
BR0055I Start of database backup: beollvud.tib 2014-08-05 16:12:39
BR0484I BRBACKUP log file: /oracle/BWD/sapbackup/beollvud.tib
BR0477I Oracle pfile /oracle/BWD/112_64/dbs/initBWD.ora created from spfile /oracle/BWD/112_64/dbs/spfileBWD.ora
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: beollvud
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt0.1
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/rmt0.1 will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2014-08-05 16:12:39
BR0226I Rewinding tape volume in device /dev/rmt0...
BR0278E Command output of 'LANG=C tctl -f /dev/rmt0 rewind':
/dev/rmt0: I/O error
BR0280I BRBACKUP time stamp: 2014-08-05 16:12:58
BR0279E Return code from 'LANG=C tctl -f /dev/rmt0 rewind': 2
BR0213E Winding tape volume in device /dev/rmt0.1failed
BR0219E Initialization of volume SCRATCH in device /dev/rmt0.1 failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2014-08-05 16:12:58
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Regards
Thanks Yogesh
output of mt -f /dev/rmt0 status
# mt -f /dev/rmt0 status
rmt0 Available 71-T1-01 Other FC SCSI Tape Drive
attribute value description user
block_size 512 BLOCK size (0=variable length) True
delay 45 Set delay after a FAILED command True
density_set_1 0 DENSITY setting #1 True
density_set_2 0 DENSITY setting #2 True
extfm yes Use EXTENDED file marks True
location Location Label True
lun_id 0x0 Logical Unit Number ID False
mode yes Use DEVICE BUFFERS during writes True
node_name 0x2001000e11152b2a FC Node Name False
res_support no RESERVE/RELEASE support True
ret_error no RETURN error on tape change or reset True
rwtimeout 144 Set timeout for the READ or WRITE command True
scsi_id 0x11d00 SCSI ID False
var_block_size 0 BLOCK SIZE for variable length support True
ww_name 0x2002000e11152b2a FC World Wide Name False
parameters are set of my AIX by defualt in initSID.sap.
Regards
Similar Messages
-
Error while Backup through DB13
Hi Experts.
This is the first time when we are taking backup through DB13.
I have inserted the Tape in the Tape drive and run the Online Full Backup. But an error was thrown as mentioned Below.
Please also suggest me what are the changes which needs to be done on OS Level for the successful backup through DB13.
Part of Error Message
BR0280I BRBACKUP time stamp: 2010-09-09 18.01.59
BR0057I Backup of database: JMD
BR0058I BRBACKUP action ID: beebweva
BR0059I BRBACKUP function ID: ant
BR0110I Backup mode: ALL
BR0077I Database file for backup: /oracle/JMD/sapbackup/cntrlJMD.dbf
BR0061I 55 files found for backup, total size 109113.406 MB
BR0143I Backup type: online
BR0111I Files will be compressed
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt/0mn
BR0103I Following backup volume will be used: JMDB01
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name JMDB01 required in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2010-09-09 18.01.59
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/JMD/sapbackup/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0278E Command output of 'LANG=C cd /oracle/JMD/sapbackup && /usr/sap/JMD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt/0mn': -
error
Can't open /dev/tty to prompt for more media.
BR0280I BRBACKUP time stamp: 2010-09-09 18.01.59
BR0279E Return code from 'LANG=C cd /oracle/JMD/sapbackup && /usr/sap/JMD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt/0mn': 2
BR0359E Restore of /oracle/JMD/sapbackup/.tape.hdr0 from /dev/rmt/0mn failed due to previous errors
BR0218E Checking label on volume in device /dev/rmt/0mn failed -
error
BR0236I Perhaps volume initialization with option '-i force' required
BR0056I End of database backup: beebweva.ant 2010-09-09 18.01.59
BR0280I BRBACKUP time stamp: 2010-09-09 18.01.59
BR0054I BRBACKUP terminated with errors
Kindly Suggest.Hi Anil,
Thanks for your help. I did as you Said and it also proceeded a Bit Far...
Now I Get A different set of Error. Please Give your Valuable Suggestions.
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.09
BR0057I Backup of database: JMD
BR0058I BRBACKUP action ID: beecamwa
BR0059I BRBACKUP function ID: ant
BR0110I Backup mode: ALL
BR0077I Database file for backup: /oracle/JMD/sapbackup/cntrlJMD.dbf
BR0061I 55 files found for backup, total size 109113.406 MB
BR0143I Backup type: online
BR0111I Files will be compressed
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt/0mn
BR0103I Following backup volume will be used: JMDB01
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name JMDB01 required in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.09
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/JMD/sapbackup/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0241I Checking label on volume in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.10
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0202I Saving /oracle/JMD/sapbackup/.tape.hdr0
BR0203I to /dev/rmt/0mn ...
BR0209I Volume in device /dev/rmt/0mn has name JMDB01
BR0202I Saving init_ora
BR0203I to /dev/rmt/0mn ...
BR0202I Saving /oracle/JMD/102_64/dbs/initJMD.sap
BR0203I to /dev/rmt/0mn ...
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.36
BR0198I Profiles saved successfully
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.38
BR0315I 'Alter tablespace PSAPSR3 begin backup' successful
BR0201I Compressing /oracle/JMD/sapdata1/sr3_1/sr3.data1
BR0203I to /sapinstcd/sr3.data1.Z ... -
error
BR0278E Command output of 'LANG=C compress -c /oracle/JMD/sapdata1/sr3_1/sr3.data1 > /sapinstcd/sr3.data1.Z':
sh: /sapinstcd/sr3.data1.Z: Cannot create the specified file.
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.38
BR0279E Return code from 'LANG=C compress -c /oracle/JMD/sapdata1/sr3_1/sr3.data1 > /sapinstcd/sr3.data1.Z': 1
BR0224E Compressing /oracle/JMD/sapdata1/sr3_1/sr3.data1 to /sapinstcd/sr3.data1.Z failed due to previous errors -
error
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.42
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: beecamwa.ant 2010-09-10 15.04.38
BR0280I BRBACKUP time stamp: 2010-09-10 15.04.42
BR0054I BRBACKUP terminated with errors
Thanks Again. Waiting for your Reply. -
Email notification of backup through DB13
Hi,
I am running backup using BR Tools scheduled through DB13. Is there any way out through which I can get email notification weather backup was done successfully or not & error msg if not.
I appreciate all your help in advance.
Thanks,
MurtazaSetting up a monitoring for a system is not a "fast" thing and without understanding what's going on behind the scene I can already read your next post "Mail from RZ20 is not working" in the forum.
I'm NOT blaming you but it's better for you if you read the provided (good) documentation on the given site and understand the concepts and prerequisites (mail setup etc.), otherwise you will be lost if it's not working.
Just my 2 cents.
Markus -
Configuring backup through DB13 on windows system with mssql as database
Hi
I m using ecc 5.0 with mssql database on windows system.
I have to take backup using DB13. wht configuration steps are there to take backup using db13.
plz suggest me the configuration steps.
plz do the needfull.> Actually my client wants to take backup using db13 on disk..as i m new to mssql.i have configured it on oracle database bt i dont know hw to configure it on mssql.so plz do the needful.
The "needful" thing to do now is to read documentation.
Doing backup is a very crucial part of running a SAP installation, it's just not enough to follow a "click-guide" without knowing what is done. I told you a few approaches to start to dig into that but you seem to ignore them.
I'm really not sure why I should repeat here all the steps listed in the online documentation, such as
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/5b/1f2d61f80f4b26a0a4a96c8bb791ec/frameset.htm
which clearly explains how a backup is set up in DB13/DBACOCKPIT...
Markus -
hello,
if i try to use DB13 for relo log backup it gives error as
Job started
Step 001 started (program RSDBAJOB, variant &0000000000286, user name BASIS)
Execute logical command BRARCHIVE On host dmrctst
Parameters: -u / -c force -p initQAS.sap -cds -v QAS_TUE2_00
BR002I BRARCHIVE 6.10 (76)
BR157E Value 'QAS_TUE2_00' for option '-v' longerthan 10 characters
BR007I End of offline redo log processing: adxynlbm.log 2008-05-19 18.39.22
BR280I Time stamp 2008-05-19 18.39.22
BR005I BRARCHIVE terminated with errors
External program terminated with exit code 3
BRARCHIVE returned error status E
Job finished
how should i take backup of redo logs,we are using 4.6C version?
-saurabh"BR157E Value 'QAS_TUE2_00' for option '-v' longerthan 10 characters"
This is the pertinent bit. Your naming convention for your media does not comply with the limitations ..... i.e, change your tape name to be 10 or less characters. -
Backup through DB13 take long time
Hi,
I am using Oracle 9.0 DB in SAP ECC 6.0 (windows 2003) & Size of DB is around 118 GB.For last one week i m facing a problem of slow processing speed of backup in Tape.Its take 2 Hrs for complete backup(previously it was take only 30 mins).
Please help where is the exact problem !!
Rgds
SudarshanHI, Mark
Current Backup Log
25.11.2010 23:00:37 Parameters:-u / -jid ALL__20101124230000 -c force -t online -m all -p initprd.sap
26.11.2010 00:42:24 BR0051I BRBACKUP 7.00 (36)
Prevous Backup Log
04.11.2010 23:00:32 Parameters:-u / -jid ALL__20100902230000 -c force -t online -m all -p initprd.sap
04.11.2010 23:33:01 BR0051I BRBACKUP 7.00 (36)
Hope you understand where it consume time . -
Hi Gurus ,
In DB13 T-code , what is the difference between the Full Database online + redolog backup and Whole database online + redolog backup ? Kindly tell which type the best one to take backup daily .
Regards
SelvanDear,
As per me there is no difference.
You can use full offline backup + redologs.
If you can able to take downtime you can go ahead with full offline backup + redologs.
Regards,
Nikunj Thaker.
Edited by: Nikunj Thaker on Jan 21, 2009 5:06 PM -
SAP ECC6.0 on SQL BACKUP ISSUE THROUGH DB13
Dear All,
My SAP Environment is : Windows Server 2003
Database : SQL2005
SAP version: ECC6.0 SR3
I am in process to configure backup system of Development server through DB13 but i am getting the below error : -
Jobname: SAP CCMS Full DB Backup of DEV [20090618113720-4-113720]
Type: TSQL
DB-Name: DEV
For Run: 20090618 11:37:20
Job history information *****************************
Stepname: CCMS-step 1
Command: declare @exeStmt nvarchar(2000) exec dev.sap_backup_databases @dbList=
"DEV",@r3Db="DEV",@bDev="R3DUMP0",@expDays= 27,@jobName= "SAP CCMS Ful
l DB Backup of DEV [20090618113720-4-113720]",@bkupChecksum="N",@bkupT
ype="F",@nativeBkup="N",@exeDate = "20090618113720",@bkupSim = "N",@fo
rmat = 0,@init = 1,@bkupDb = "DEV",@unload = 0,@exeStmt = @exeStmt OUT
PUT
Status: (failure)
Message: 2528
Severity: 16
Duration: 0 hours(s) 0 min(s) 1 sec(s)
Last msg: Executed as user: NT AUTHORITY\SYSTEM. Mount tape for BACKUP DATABASE
of database 'DEV' on tape drive '
.\tape0'. [SQLSTATE 42000] (Error 4
027) DBCC execution completed. If DBCC printed error messages, contac
t your system administrator. [SQLSTATE 01000] (Error 2528). The step
failed.
<----
End of Job Step History -
>
Job history information *****************************
but i am able to take backup on tape through SQL Server management studio.
Do we have to do some steps before scheduling backup through DB13 ?
Please suggest.
Regards,
RohitHi Markus,
Thanks for reply.
No i have not provide any speacial permission to user SAPServiceDEV by default this user is member of : SAP_DEV_GlobalAdmin , SAP_DEV_LocalAdmin , SAP_LocalAdmin , User group.
Which permission i have to assign to this user?
kindly suggest.
Thanks in advance.
Rohit -
Dear Experts,
We are taking backup through db13 ECC Deve Server but getting following error--
Job started
Step 001 started (program RSDBAJOB, variant &0000000000029, user ID BASIS)
Execute logical command BRBACKUP On host sapeccdev
Parameters:-u / -jid TAPIN20091130155408 -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.00 (32)
BR0055I Start of database backup: becaipbs.tib 2009-11-30 15.54.08
BR0484I BRBACKUP log file: /oracle/DEV/sapbackup/becaipbs.tib
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.09
BR0301W SQL error -27140 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-27140: attach to post/wait facility failed
BR0310W Connect to database instance DEV failed
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: becaipbs
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt/2mn
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/rmt/2mn will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.09
BR0226I Rewinding tape volume in device /dev/rmt/2m ...
BR0202I Copying /oracle/DEV/sapbackup/.tape.hdr0
BR0203I to /dev/rmt/2mn ...
BR0209I Volume in device /dev/rmt/2mn has name SCRATCH
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.16
BR0226I Rewinding tape volume in device /dev/rmt/2m ...
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.18
BR0301E SQL error -27140 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-27140: attach to post/wait facility failed
BR0310E Connect to database instance DEV failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.18
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Kindly revert with helful suggestion.
Regards,
AjitDear Markus,
after the relink all, this is the following log----
Job started
Step 001 started (program RSDBAJOB, variant &0000000000005, user ID BASIS)
Execute logical command BRBACKUP On host qserv
Parameters:-u / -jid TAPIN20091130174249 -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.00 (32)
BR0055I Start of database backup: becaiysn.tib 2009-11-30 17.42.49
BR0484I BRBACKUP log file: /oracle/QAS/sapbackup/becaiysn.tib
BR0477I Oracle pfile /oracle/QAS/102_64/dbs/initQAS.ora created from spfile /oracle/QAS/102_64/dbs/spfileQAS.ora
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: becaiysn
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt/2mn
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/rmt/2mn will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2009-11-30 17.42.49
BR0226I Rewinding tape volume in device /dev/rmt/2m ...
BR0278E Command output of 'LANG=C mt -f /dev/rmt/2m rew':
/dev/rmt/2m: No such device or address
BR0280I BRBACKUP time stamp: 2009-11-30 17.42.50
BR0279E Return code from 'LANG=C mt -f /dev/rmt/2m rew': 1
BR0213E Winding tape volume in device /dev/rmt/2mn failed
BR0219E Initialization of volume SCRATCH in device /dev/rmt/2mn failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2009-11-30 17.42.50
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Regards,
Ajit -
Backup scheduled through DB13 not working
Hello,
We are trying to schedule backup through DB13.But it got failed due to below error.Backup scheduled through DB13 was working fine last week.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000174, user ID KHJS199)
Execute logical command BRARCHIVE On host ppd-ora-ga2
Parameters:-u / -jid LOG__20100927040000 -c force -p initGA2.sap -sd
External communication error at program start (see system log)
SAPXPG_START_XPG_LONG: sy-subrc ne 0
destination = SAPXPG_DBDEST_PPD-ORA-GA2
SXPG_STEP_XPG_START: execute_sapxpg: rc = 1.003
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
SXPG_COMMAND_EXECUTE(LONG)
<timestamp> = 20101014040033
COMMANDNAME = BRARCHIVE
ADDITIONAL_PARAMETERS =
-u / -jid LOG__20100927040000 -c force -p initGA2.
sap -sd
LONG_PARAMS
OPERATINGSYSTEM = ANYOS
TARGETSYSTEM = ppd-ora-ga2
DESTINATION = SAPXPG_DBDEST_PPD-ORA-GA2
SY-SUBRC = 1003
SXPG_COMMAND_EXECUTE failed for BRARCHIVE - Reason: program_start_error: For More Information, See SYS
Job cancelled after system exception ERROR_MESSAGE
We checked the RFC connection SAPXPG_DBDEST_PPD-ORA-GA2 and it is not working.
For target host and gateway host,we have maintained their corresponding virtual host.
Gateway is already installed on the server.
Could you please help me out on this.
Thanks,
Gopi LHello,
Just to add some more information.
We have 3 servers, X(Database + CI),Y(Dialog instance),Z(Dialog Instance).
Server X is the primary node and Y is the failover node.
Gateway is already installed on Database server and I can verify it by giving ps -aef | grep gwrd.
Thanks,
Gopi L -
Error ORA-01031: insufficient privileges when backup via DB13
Hi expert,
Currently, I have system on SuSE 10 SP2 with ECC6 and Oracle 10.2 installed.
Database backup works fine when using BRTOOLS from command line.
Error like this :
BR0278E Command output of 'SHELL=/bin/sh /oracle/I20/920_32/bin/rman
nocatalog':
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
RMAN> connect target /;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-01031: insufficient privileges
RMAN> *end-of-file*
happened when I try to schedule backup through DB13.
I try to solved this with SAP Note 776505 but still doesn't work.
Any suggestion ?
ardhianHi,
Execute the following command at sql prompt.
grant dba,resource,connect,sapdba to OPS$<SID>ADM OPS$ORA<SID>
grant dba,resource,connect,sapdba to O OPS$ORA<SID>
grant dba,resource,connect,sapdba to SAPSR3 or SAP<SID>(YOUR SCHEMA NAME)
Also check owner of SAPUSER table
SELECT OWNER FROM DBA_TABLES WHERE TABLE_NAME = 'SAPUSER';
If it returns value OPS$<SID>ADM than its ok, otherwise you have to drop this & recreate with command
CREATE TABLE "OPS$QASADM".SAPUSER
(USERID VARCHAR2(256), PASSWD VARCHAR2(256));
INSERT INTO "OPS$<sid>ADM".SAPUSER VALUES ('<sapowner>',
'<password>');
For more info go through the snote 400241
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=400241]
Thanks & Regards
Karan -
Spfile restore from RMAN Tape backup to different server
Hi All,
First of all let me thank you to the forum from which I keep updating my knowledge on oracle.
I am having issues when trying to restore spfile from controlfile autobackup to different server. Problem and other details are below:
Target version : 10.2.0.2
Netbackup : 6.5.6
Taken the tape backup through rman on server ABC and trying to restore the spfile from controlfile autobackup to server XYZ. Tape backup has been taken today morning and trying restore now.
Both servers ABC and XYX have been added (as clients) to netbackup policy.
Below is the syntax I used for restoring spfile and getting error as mentioned.
RMAN> run {
2> set controlfile autobackup format for device type 'SBT_TAPE' to '%F';
3> allocate channel ch00 device type 'sbt_tape'
4> parms='ENV=(NB_ORA_SERV=Mediaserver,NB_ORA_CLIENT=XYZ)';
5> restore spfile to pfile '/oracle/product/10g/dbs/inittest.ora' from
6> autobackup maxseq 5 maxdays 3;
7> }
executing command: SET CONTROLFILE AUTOBACKUP FORMAT
allocated channel: ch00
channel ch00: sid=36 devtype=SBT_TAPE
channel ch00: Veritas NetBackup for Oracle - Release 6.5 (2010042405)
Starting restore at 03-AUG-2011
channel ch00: looking for autobackup on day: 20110803
channel ch00: looking for autobackup on day: 20110802
channel ch00: looking for autobackup on day: 20110801
channel ch00: no autobackup in 3 days found
released channel: ch00
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 08/03/2011 14:03:26
RMAN-06172: no autobackup found or specified handle is not a valid copy or piece
Not sure where I am doing wrong. The same can be restored onto same host (I.E ABC) without any issues .
Request your help and guidance.
Thanks,
SSSI don't know whether you can restore to a different server. The easier way should be
RMAN> restore spfile to pfile 'YOUR_PFILE_NAME' from autobackup;
then copy this to the new host.
Check this link
restore spfile to another host
Hope this helps -
Hi,
Iam unable to login the system.my ora arch directory is full,i know how to take backup through db13.
iam unaware of how to take the back up through brtools.how to solve this problem.os is aix and db is oracle. guide me for same to solve problem.
ThankuHi Harshit,
Do the following to take archive log backup:-
On WIndows:-
Step 1:- Login with SIDadm
Step 2:- Open CMD prompt and use brtools command
Step 3:- It will open Brtools screen
Step 4:- Select option 4 backup and database copy
Step 5:- Next select 2 Archivelog backup
Step 6:- Then continue , continue and continue it will start archivelog backup.
On Unix:-
Step 1:- login with Ora<SID> user
Step 2:- Brtools
Step 3:- It will open Brtools screen
Step 4:- Select option 4 backup and database copy
Step 5:- Next select 2 Archivelog backup
Step 6:- Then continue , continue and continue it will start archivelog backup.
OR
you can use the following command
brarchive -c -sd -u
Best luck
Atil -
Hi Support Team,
Here we have an issue while taking backup of our Golden Master.We are
trying to take backup
through db13 ( whole database online + redo log backup).We are copying
the whole databse backup to the
local harddisk of the golden master server and while scheduling redo
log back-ups we are choosing function '-cds'
AS we found that our brbackup was successful and brarchive will be
successfull only when we choose function
'-s'.When we chosse function '-cds' for brarchive we get an error
saying that :
BR0181E Option '-cds' not supported for 'disk'
Our basic doubt is can we try restoring the database in case of
disaster recovery using the function '-s' for
brarchive.If not could please provide us solution which is the best
function to choose for redo log files while tacking backup
to local hard-disk.
Regards
SandeepHi Varadhu,
Thanks for the reply.
The process which we follow here is we schedule the backup (whole database online +redo log back up) to the local hard disk of the server.After the suxcessful backup we move the backup data to the external hard disk which is in the same lan.Like this we have last 10 suxcessful backup till now executed in consequetives suxcessive friday, end of the day and now my external hard disk is getting filled up.
Now my doubt is :
How many suxcessful backup data i require for brrestore in case of complete database recovery or disaster recovery.
Kindly let me know at the earliest.
Thanks in advance. -
Online backup fail through DB13
Dear experts,
I am using sap BW 7.4 under oracle 11.0.2.4
I am trying to take online backup on disk
I select action whole database online backup + redo file backup as will as
Full database online backup and BRACHIVE function is -sd
but backup was failed I am unable to resolve it following are logs generated during backup
#SAVED.... /oracle/online/beokvzrl/system.data1 #1/17
BR0280I BRBACKUP time stamp: 2014-08-02 10:58:20
BR0063I 17 of 17 files processed - 51610.133 of 51610.133 MB done
BR0204I Percentage done: 100.00%, estimated end time: 10:58
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2014-08-02 10:58:20
BR0317I 'Alter tablespace SYSTEM end backup' successful
BR0252W Function kill() failed for '17891582:15' at location BrKill-3
BR0253W errno 3: No such process
BR0278I Command output of '/usr/sap/BWD/SYS/exe/run/brconnect':
BR0801I BRCONNECT 7.40 (6)
PID=17891582
BR0252E Function fopen() failed for '/oracle/BWD/sapbackup/.user.pas' at location global_set-1
BR0253E errno 13: Permission denied
BR0074W BRCONNECT call failed
BR0280I BRBACKUP time stamp: 2014-08-02 10:58:22
BR0530I Cataloging backups of all database files...
BR0278E Command output of 'SHELL=/bin/sh /oracle/BWD/112_64/bin/rman nocatalog':
Recovery Manager: Release 11.2.0.4.0 - Production on Sat Aug 2 10:58:23 2014
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
RMAN>
RMAN> connect target *
connected to target database: BWD (DBID=2340275772)
using target database control file instead of recovery catalog
RMAN> **end-of-file**
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of catalog command on default channel at 08/02/2014 10:58:25
ORA-19564: error occurred writing 8192 bytes at block number 1
ORA-27091: unable to queue I/O
ORA-27041: unable to open file
IBM AIX RISC System/6000 Error: 13: Permission denied
Additional information: 3
Additional information: 4
Additional information: 4194434
RMAN>
Recovery Manager complete.
BR0280I BRBACKUP time stamp: 2014-08-02 10:58:25
BR0279E Return code from 'SHELL=/bin/sh /oracle/BWD/112_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance BWD failed
BR0200I BR_TRACE: location BrRmanCall-56, commands for RMAN in: /oracle/BWD/sapbackup/.beokvzrl.cmd
@/oracle/BWD/sapbackup/..beokvzrl..cmd
host '/usr/sap/BWD/SYS/exe/run/brtools -f delete /oracle/BWD/sapbackup/..beokvzrl..cmd';
catalog datafilecopy
'/oracle/online/beokvzrl/sr3.data1',
'/oracle/online/beokvzrl/sr3.data2',
'/oracle/online/beokvzrl/sr3.data3',
'/oracle/online/beokvzrl/sr3.data4',
'/oracle/online/beokvzrl/sr3.data5',
'/oracle/online/beokvzrl/sr3.data6',
'/oracle/online/beokvzrl/sr3740.data1',
'/oracle/online/beokvzrl/sr3740.data2',
'/oracle/online/beokvzrl/sr3740.data3',
'/oracle/online/beokvzrl/sr3740.data4',
'/oracle/online/beokvzrl/sr3740.data5',
'/oracle/online/beokvzrl/sr3740x.data1',
'/oracle/online/beokvzrl/sr3740x.data2',
'/oracle/online/beokvzrl/sr3usr.data1',
'/oracle/online/beokvzrl/undo.data1',
'/oracle/online/beokvzrl/sysaux.data1',
'/oracle/online/beokvzrl/system.data1'
level 0 tag beokvzrl;
exit;
BR0280I BRBACKUP time stamp: 2014-08-02 10:58:25
BR0532E Cataloging backups of all database files failed
BR0056I End of database backup: beokvzrl.fnd 2014-08-02 10:58:25
BR0280I BRBACKUP time stamp: 2014-08-02 10:58:25
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2014-08-02 10:58:25
I am unable to understand why RMAN is use ?
and what parameters are used when I will take backup on tape
Kindly guide me
RegardsDear Srivastava for your reply,
I download latest brtools patch and apply it and change authorization profile parameters is also OK ( I run whole database online backup from brtools using same profile it done successfully )
full permission ( 777) in sapbackup folder and sub folder but through db13 backup is successfully with warning
BR0204I Percentage done: 100.00%, estimated end time: 11:57
BR0001I **************************************************
BR0252W Function kill() failed for '10420324:15' at location BrKill-3
BR0253W errno 3: No such process
BR0278I Command output of '/usr/sap/BWD/SYS/exe/run/brconnect':
BR0801I BRCONNECT 7.40 (10)
PID=10420324
BR0252E Function fopen() failed for '/oracle/BWD/sapbackup/.user.pas' at location global_set-1
BR0253E errno 13: Permission denied
BR0074W BRCONNECT call failed
BR0280I BRBACKUP time stamp: 2014-08-04 11:57:59
BR0340I Switching to the next online redolog file for database instance BWD ...
BR0321I Switch to the next online redolog file for database instance BWD successful
BR0117I ARCHIVE LOG LIST after backup for database instance BWD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/BWD/oraarch/BWDarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 838
Next log sequence to archive 841
Current log sequence 841 SCN: 28074154
Database block size 8192 Thread: 1
Current system change number 28074155 ResetId: 842452156
BR0202I Saving space_log
BR0203I to /oracle/bck/online/BWD ...
BR0202I Saving /oracle/BWD/sapbackup/beolgapq.and
BR0203I to /oracle/bck/online/BWD ...
BR0202I Saving /oracle/BWD/sapbackup/backBWD.log
BR0203I to /oracle/bck/online/BWD ...
BR0056I End of database backup: beolgapq.and 2014-08-04 11:58:01
BR0280I BRBACKUP time stamp: 2014-08-04 11:58:01
BR0053I BRBACKUP completed successfully with warnings or non-fatal errors
1. BR0252W Function kill() failed for '10420324:15' at location BrKill-3
BR0253W errno 3: No such process
2. BR0252E Function fopen() failed for '/oracle/BWD/sapbackup/.user.pas' at location global_set-1
BR0253E errno 13: Permission denied
BR0074W BRCONNECT call failed
why it backup not open file .user.pas ( it is not exist in this folder )
Kindly guide me
Regards
Maybe you are looking for
-
I have 4 devices on my iTunes account which all have different names or ID's. An iPad 2 which I just got at Xmas, my iPhone 4S, my wifes iPhone 4 and my daughters iPod. I always hook up to iTunes via a cable/dock when syncing them all separetly. Sinc
-
Unable to place disk image in Camera Archives
The Final Cut Pro X manuals show that one can import a disk image of a movie into Final Cut Pro X by opening the camera archives. I have made a disk image file (.img) from an iMovie 6 project file. (The video appears as a VTS file in the Video TS fol
-
hi, In which table item texts and header texts avialable. Edited by: Ramesh villa on Apr 11, 2009 4:49 PM
-
Trying to write a simple apple script to reveal a file.
This is what I have now: tell application "Finder" to reveal POSIX path of "/Users/lloyd/Desktop/my file.txt" but I get this error: error "Finder got an error: Can't make \"/Users/lloyd/Desktop/my file.txt\" into type item." number -1700 from "/Users
-
I recently upgraded to iTunes 8 and whenever I switch from "Genius" to "iTunes Store" in the sidebar and there is not music playing at the time, there is a thumping sound that plays through my speakers. Is it just an annoying sound effect that I can'