Tape drive error.
Hi Friends,
My DDS3 is connected to sun Blade2000.
I am in SU mode.
What I did.
First connected the drive then configured the device with
#devfsadm -c tape
# mt -f /dev/rmt/3 stat
It took the rmt/3 and showing ok.
Now when I give the command:
#tar -cvf /dev/rmt/0 /home
It is giving the following error
*$ tar cvf /dev/rmt/3 /home*
tar : /dev/rmt/3 : Permission Denied
I have checked the permission of rmt/3 and /home also all are XRW
Please help.....
Sometimes I don't agree with maal when he is hard on newbies for not providing feedback on this forum, we all have work to do and I'm sure at times we may not always remember or have the time to reply ( winter Olympics on TV is my current excuse! ). Out of 14 questions about fairly new hardware systems started by this user, only once have they replied. I would say the best solution for this issue is to start a service call to Sun Support Services.
Similar Messages
-
Hi,
Is there any command which help me in OSB
to clean a tape (Drive) that has used previously?Hi I receive following error when I want to clean a tape
from Webtool in Manage: Library Section
I do not have any Library and It is only a tape drive
Error: unable to open qlm connection - name not found
Is there any idea? -
Error after installing tape drive
Hi,
I am a newbie to Solaris, I have a SunFire V120 box, i was trying to install a tape drive(HP SureStore DAT24), i did the install in this manner.
# rm -rf /etc/path_to_inst
# init 6
later at the "ok" prompt i gave "boot -ar" after doing that it asked me various options i accepted the default values, when it asked for rebuilding the /etc/path_to_inst file i said "y", but later everything went wrong.
This is the output,
Sun Fire V120 (UltraSPARC-IIe 548MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #51581741.
Ethernet address 0:3:ba:13:13:2d, Host ID: 8313132d.
Executing last command: boot -ar
Boot device: /pci@1f,0/pci@1/scsi@8/disk@0,0 File and args: -ar
Enter filename [kernel/sparcv9/unix]:
Enter default directory for modules [/platform/SUNW,UltraAX-i2/kernel /platform/
sun4u/kernel /kernel /usr/kernel]:
Name of system file [etc/system]:
SunOS Release 5.8 Version Generic_108528-15 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
|
The /etc/path_to_inst on your system does not exist or is empty.
Do you want to rebuild this file [n]? y
root filesystem type [ufs]:
Enter physical name of root device
[/pci@1f,0/pci@1/scsi@8/disk@0,0:a]:
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_raid failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
WARNING: forceload of misc/md_stripe failed
WARNING: forceload of misc/md_mirror failed
configuring IPv4 interfaces: eri0.
Hostname: aks
mount: /dev/md/dsk/d1 is not this fstype.
/sbin/rcS: /etc/dfs/sharetab: cannot create
failed to open /etc/coreadm.confsyseventd: Unable to open daemon lock file '/etc
/sysevent/syseventd_lock': 'Read-only file system'Configuring /dev and /devices
devfsadm: mkdir failed for /dev 0x1ed: Read-only file system
devfsadm: open failed for /dev/.devfsadm_dev.lock: Read-only file system
Configuring the /dev directory (compatibility devices)
/etc/rcS.d/S50devfsadm: /tmp/sock2path.57: cannot create
The system is coming up. Please wait.
/sbin/mountall: /tmp/sh800: cannot create
rm: Unable to remove directory /tmp: Read-only file system
mkdir: Failed to make directory "/tmp"; Read-only file system
chown: /tmp: Read-only file system
10/5/2005 9:56:42 GMT LOM time reference
/etc/rc2.d/S69inet: /tmp/ifconfig.100: cannot create
grep: can't open /tmp/ifconfig.100
/etc/rc2.d/S69inet: test: argument expected
starting rpc services: rpcbind done.
Setting netmask of eri0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway aks
syslog service starting.
dumpadm: failed to open /etc/dumpadm.conf: Read-only file system
cron could not unlink FIFO: No such file or directory
cron aborted: cannot create fifo queue
! cannot create fifo queue Wed Oct 5 04:56:45 2005
! ******* CRON ABORTED ******** Wed Oct 5 04:56:45 2005
/dev/bd.off: Read-only file system
/etc/rc2.d/S90solaris: /tmp/fgd.207: cannot create
cat: cannot open /tmp/fgd.207
Error -- cannot open error log /.FGDLog
volume management starting.
/etc/rc3.d/S15nfs.server: /tmp/sharetab.232: cannot create
touch: /tmp/sharetab.232 cannot create
mv: cannot access /tmp/sharetab.232
share_nfs: /home/weblogic/SIMecho/logs: No such file or directory
share_nfs: /local/data2/home/weblogic/SIMecho/out: No such file or directory
chmod: WARNING: can't change /etc/dfs/sharetab
The system is ready.
aks console login:
INIT: Command is respawning too rapidly. Check for possible errors.
id: sc "/usr/lib/saf/sac -t 300"
aks console login: aks console login: root
Password:
/etc/logindevperm: /dev/mouse: Read-only file system
/etc/logindevperm: /dev/kbd: Read-only file system
Last login: Wed Oct 5 04:20:28 on console
Oct 5 04:57:46 aks login: ROOT LOGIN /dev/console
root @ aks::/> vi /etc/system
"/etc/system" [Read only] 109 lines, 2687 characters
After doing some google i found that nothing is wrong i just need to comment some lines in the /etc/system file. But still i wasn't able to bacause the system is mounted in read only mode.
Thanking you in advance.
Regards,
Rajendra Rait.I have exactly the same problem after running an fsck to clear corrupt files.
Is there a problem with mirrored disks and using boot -ar to rebuild path_to_inst?
The basic problem is that the root filesystem is coming up as read only
i.e.
The /etc/path_to_inst on your system does not exist or is empty.
Do you want to rebuild this file [n]? y
root filesystem type [ufs]:
Enter physical name of root device
[/pci@1f,0/pci@1/scsi@8/disk@0,0:a]: /pci@1f,0/pci@1/scsi@8/disk@1,0:a
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_raid failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
WARNING: forceload of misc/md_stripe failed
WARNING: forceload of misc/md_mirror failed
configuring IPv4 interfaces: eri0 lo0:1.
Hostname: plant
mount: /dev/md/dsk/d0 is not this fstype.
failed to open /etc/coreadm.confsyseventd: Unable to open daemon lock file '/etc/sysevent/syseventd_lock': 'Read-only file system'Configuring /dev and /devices
devfsadm: mkdir failed for /dev 0x1ed: Read-only file system
devfsadm: open failed for /dev/.devfsadm_dev.lock: Read-only file system
Configuring the /dev directory (compatibility devices)
/etc/rcS.d/S50devfsadm: /tmp/sock2path.52: cannot create
The system is coming up. Please wait.
/sbin/mountall: /tmp/sh730: cannot create
Any help would be gratefully received as I want to avoid rebuilding the server from scratch!
Thanks -
-36 errors, can't copy files in finder or backup to tape drive
Does anyone know what causes -36 errors and how we can eliminate them? We need to backup our files, but have been unable to do so due to -36 I/O errors in Retrospect. Files on which this error is reported by Retrospect will not copy in the finder, either. I think our hard drive may be bad. How can we recover our files if they cannot be backed-up or copied?
We recently purchased a tape drive for backup, an Exabyte VXA-2 FireWire Tape Drive. We are using VXA-2 V23 (230m) 80GB/160/GB Data Cartridges. I have verified that this drive is supported by Retrospect and that we have the correct tape cartridge. We are backing up one partition of a hard drive that is divided into two partitions. One is the start-up partition, the other is a partition on which we store customer files. We are backing up the partition that stores customer files. The tape drive is attached to and backing up a Macintosh G3 that was recently upgraded from system 9 to OS X 10.3.9 (Panther). The hard drive was not re-formatted before OS X was installed. I have downloaded updates and updated our Retrospect to the latest Retrospect version 6.1.126. I keep getting read errors when trying to backup the customer files partition, although I have ran every good repair program I know of to that partition — TechTool, Disk Warrior and Disk Utility. The tests all say the drive is OK. The only test I have not done recently is a surface scan, as this is an over-night procedure, but plan to do it this evening. A surface scan was done at the beginning of January, but we have continued to have problems. Yesterday morning I ran Disk Utility and it verified that the partition was okay.
I am fairly certain the problem is not with the tape drive, as a test backup up of some of the problem customer files to a file backup on the startup drive also produced many -36 errors. Also the tape drive worked on another Mac with no -36 errors.
The following is an excerpt from the log of last night's backup when the program was backing up (this is a very small portion of the whole log, there was a very long list of files it reported read errors on) Following this excerpt is also an excerpt of errors reported while the program was trying to verify the backup:
∆ Retrospect version 6.1.126
automatically launched at 2/20/2006 7:00 PM
+ Retrospect Driver Update, version 6.1.3.101
+ Normal backup using Files Volume M,W,F BU at 2/20/2006 7:00 PM
To backup set Files Volume M,W,F Set…
- 2/20/2006 7:00:20 PM: Copying Files Volume…
Can't read file “•T+•Files Volume”, error -36 (i/o error, bad media?), path: “Files Volume/•T+•Files Volume”.
Can't read file “•T+•Files Volume(1)”, error -36 (i/o error, bad media?), path: “Files Volume/•T+•Files Volume(1)”.
Can't read file “•T+•Files Volume(2)”, error -36 (i/o error, bad media?), path: “Files Volume/•T+•Files Volume(2)”.
Can't read file “BALANCE PLUS AGREEMENT2.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/BALANCE PLUS AGREEMENT2.p65”.
Can't read file “Balance Plus Agreements”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/Balance Plus Agreements”.
Can't read file “BALANCE PLUS.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/BALANCE PLUS.p65”.
Can't read file “2000/#2(U)”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/cdcguide/2000/#2(U)”.
Can't read file “New Accounts-CSB Final.PMD”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/New Accounts Brochures 10-05/New Accounts-CSB Final.PMD”.
Can't read file “Pacesetter Ad.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Pacesetter Bank/Pacesetter Hometown Financing/Pacesetter Ad.tiff”.
Can't read file “SUMMERTIME.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Summertime/SUMMERTIME.p65”.
Can't read file “RiverFest Comcast1.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/Adelphia/Comcast Logos & Art/RiverFest Comcast1.EPS”.
Can't read file “CHS logo converted to Photoshop”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/CHS Logo-Various forms/CHS logo converted to Photoshop”.
Can't read file “CHS logo adjusted/Photoshop.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/CHS Logo-Various forms/Adjusted by Karen/CHS logo adjusted/Photoshop.eps”.
Can't read file “FWOLO~13.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/FWO logos/FWO Logos Various Formats/EPS/FWOLO~13.EPS”.
Can't read file “wellnotype.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/well logo for MGH/wellnotype.bmp”.
Can't read file “spencer logo bw.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/spencer logo bw.eps”.
Can't read file “spencer logo.TIF”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/spencer logo.TIF”.
Can't read file “DOLCO 900 Master BC 10up old”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-Misc/Dolco Packaging (Bill Cooke)/DOLCO Business Cards/DOLCO BCs/Dolco BCs 10up/DOLCO 900 Master BC 10up old”.
Can't read file “accutech logo color sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Accutech Systems/accutech logo color sep.eps”.
Can't read file “Kerr 1 backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 1 backer.eps”.
Can't read file “LNT price labels.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Jar Toppers / Gift Promo/email to discount labels/LNT price labels.eps”.
Can't read file “A-09.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/A-09.DOT”.
Can't read file “A-14.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/A-14.DOT”.
Can't read file “B-21.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/B-21.DOT”.
Can't read file “B-35.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/B-35.DOT”.
Can't read file “Visor Install fix.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Booklets/Visor Installation Booklet/Visor Install fix.doc”.
Can't read file “Visor Program (SD- 1030) B.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Booklets/Visor Programming Booklet/Visor Program (SD- 1030) B.doc”.
Can't read file “BlueConnect_16pgInstall.qxp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/BlueConnect_16pgInstall.qxp”.
Can't read file “BlueConnect_28pgUserREV.qxp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/BlueConnect_28pgUserREV.qxp”.
Can't read file “BlueConnect Installation Instructions 2.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BlueConnect Installation Instructions 2.doc”.
Can't read file “BlueConnect Installation Instructions rev 10-07-05.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BlueConnect Installation Instructions rev 10-07-05.doc”.
Can't read file “BlueConnectInstall16pg.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BlueConnectInstall16pg.doc”.
Can't read file “CONSUMER USERS MANUA1.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/CONSUMER USERS MANUA1.doc”.
Can't read file “BlueConnect Reg Card.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Registration Cards/BC 203 BlueConnect Reg/BlueConnect Reg Card.doc”.
Can't read file “Living Will insert p1.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Cresthaven Living Will Insert 1/06/Living Will insert p1.eps”.
Can't read file “Living Will insert p2.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Cresthaven Living Will Insert 1/06/Living Will insert p2.eps”.
Can't read file “Elm Ridge 4-c vets Page_1.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Elm Ridge Valor Hill/Elm Ridge 4-c vets Page_1.tiff”.
Can't read file “Elm Ridge 4-c vets Page_2.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Elm Ridge Valor Hill/Elm Ridge 4-c vets Page_2.tiff”.
Can't read file “Reply card APv.1 (Vets).eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Mailers & Promo/Acacia / Rose Hills mailers/PDFs Converted to art/Reply card APv.1 (Vets).eps”.
Can't read file “FinancialPolicyBroch.pub”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/FinancialPolicyBroch.pub”.
Can't read file “CIO logo color sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/Bus Cards / Appt Cards/CIO Logos/Art/CIO logo color sep.eps”.
Can't read file “FCC Letterhead Indiana.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/FCC (formerly Jaytec)/Letterheads/Envelopes/Memo/FCC Letterhead Indiana.bmp”.
Can't read file “habitat envelope.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Habitat for Humanity/habitat envelope.p65”.
Can't read file “Page 2.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/In Touch Dining (Table Talk)/Platter Chatter - Don Halls/Fix in Quark then print to EPS/Page 2.eps”.
Can't read file “brochure”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/My Hair Broker/brochure”.
Can't read file “brochure-1”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/My Hair Broker/brochure-1”.
Can't read file “brochure”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/My Hair Broker/My Hair Broker recovered files/brochure”.
Can't read file “GIFTBOX.epsbitmap”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/CHARLES/MISC FILES/GIFTBOX.epsbitmap”.
Can't read file “ASC LetterHeadFinal.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Accutech/original art (emailed)/ASC LetterHeadFinal.EPS”.
Can't read file “TSC 104 and 111.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/Fixed Files/TSC 104 and 111.pdf”.
Can't read file “TSC 116 Initial Note.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/Fixed Files/TSC 116 Initial Note.pdf”.
Can't read file “sptslogo screen sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Sports Physical Therapy (SPTS)/logos & art/sptslogo screen sep.eps”.
Can't read file “sptslogo spot sep cool gray.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Sports Physical Therapy (SPTS)/logos & art/sptslogo spot sep cool gray.eps”.
Can't read file “A Stout BCs 12 up all names”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 12 up all names”.
Can't read file “bifold on grstrosprep2.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/03DET0609 (CGIC Prep 4)/bifold on grstrosprep2.qxd”.
Can't read file “MAP_DUO.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/04DET0076 (CGIC Prep 1)/Pictures/MAP_DUO.tif”.
Can't read file “bifold on grstrosprep2.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/03DET0609 (CGIC Prep 4)/bifold on grstrosprep2.qxd”.
Can't read file “Beth Business Card.2”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/Beth Business Card.2”.
Can't read file “frankfort map gray.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/frankfort map gray.tif”.
Can't read file “lafayette map.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/lafayette map.tif”.
Can't read file “white county gray.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/white county gray.tif”.
Can't read file “Hoosier Lottery HL-ARC.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Hoosier Lottery/Age Restriction Cards 2005/Hoosier Lottery HL-ARC.pmd”.
Can't read file “HCI_card2.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Hunter Construction Inc./HCI_card2.tiff”.
Can't read file “IOH 016 steroid epideral inject”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/IOH - Indy Ortho Hospital/IOH 016 steroid epideral inject”.
Can't read file “IOHLOGO.TIF”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/IOH - Indy Ortho Hospital/Indiana Ortho Hospital logos/logo file from customer/IOHLOGO.TIF”.
Can't read file “OIFI 610 Reg Env Fishers.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/Envelopes/OIFI 610 Reg Env Fishers.pmd”.
Can't read file “ORTHO 542 Memo master stock 9up”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/ORTHO forms/ORTHO 542 Memo master stock 9up”.
Can't read file “Ortho 542 memo NEW master.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/ORTHO forms/Ortho 542 memo NEW master.pmd”.
Can't read file “SESC 042 Local Discharge.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/SESC Southeast Surgery Center/SESC 042 Local Discharge.pmd”.
Can't read file “Richmond Baking from scan.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Richmond Baking/Richmond Baking from scan.eps”.
Can't read file “RPL 300C 4-02.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Richmond Power & Light/RPL 300C 4-02.p65”.
Can't read file “RPL lighter.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Richmond Power & Light/RPL lighter.pmd”.
Can't read file “Burlington BLUE.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Unified Group Services/Burlington Motor Carriers/Burlington BLUE.eps”.
Can't read file “Burlington RED.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Unified Group Services/Burlington Motor Carriers/Burlington RED.eps”.
Can't read file “WW-SUMMER EVENT Postcard.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Wilson Wines/WW-SUMMER EVENT Postcard.p65”.
Can't read file “OSBORNS.TIF”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Debbie/Albany EMS/AEMS spaghetti poster/OSBORNS.TIF”.
Can't read file “BCH 7019 Physicians Orders”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Debbie/Blackford Community Hospital/BCH forms/BCH 7019 Physicians Orders”.
Can't read file “BCH 7066 Outcomes Walk Test”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Debbie/Blackford Community Hospital/BCH forms/BCH 7066 Outcomes Walk Test”.
EXCERPT FROM LOG WHEN TRYING TO VERIFY BACKUP:
2/20/2006 10:51:12 PM: Comparing Files Volume…
Can't read file “CS Booklet Acknow Form.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/AAAA/CS Booklet Acknow Form.pmd”.
File “BV Layout First Quarter.pmd”: miscompare at data offset 221,055, path: “Files Volume/Customer files/Bill Morris/BV Layout First Quarter.pmd”.
Can't read file “E FUNDS TRANSFER AGREE.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/E FUNDS TRANSFER AGREE.doc”.
Can't read file “BALANCE PLUS AGREEMENT2”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/BALANCE PLUS AGREEMENT2”.
Can't read file “Blackford Golf Club.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Blackford Golf Club/Blackford Golf Club.p65”.
Can't read file “INVESTMENT BROCHURE 7-04.PMD”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Investment Brochure/INVESTMENT BROCHURE 7-04.PMD”.
Can't read file “Pacesetter Stmt-Hartford 04 old”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Pacesetter Bank/Hartford City/Pacesetter Stmt-Hartford 04 old”.
Can't read file “TELEBANKING.P65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Pacesetter Tele-Banking/TELEBANKING.P65”.
Can't read file “ *chs FHC logos (USE ME)”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/CHS Logo-Various forms/ *chs FHC logos (USE ME)”.
Can't read file “FWOLOG~D.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/FWO logos/FWO Logos Various Formats/EPS/FWOLOG~D.EPS”.
Can't read file “FWOLO~18.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/FWO logos/FWO Logos Various Formats/EPS/FWOLO~18.EPS”.
Can't read file “Jiont Replacement Logo.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/logos/Jiont Replacement Logo.bmp”.
File “SV Name 1 line 8x40p.tif”: miscompare at data offset 994,239, path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/St. Vincent Scans/Logos/SV Name 1 line 8x40p.tif”.
Can't read file “SV-birds to side, no addr.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/St. Vincent Scans/Logos/SV-birds to side, no addr.tiff”.
Can't read file “Spencer logo bw.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/Spencer logo bw.bmp”.
Can't read file “spencer printing”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/spencer printing”.
File “Appt Cards No Logo 10-up”: miscompare at data offset 94,208, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/Appointment Cards/Appt Cards No Logo 10-up”.
File “BMA 202,BMA 2114 10up Musselman”: miscompare at data offset 52,622, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/Appointment Cards/BMA 202,BMA 2114 10up Musselman”.
File “BMA Non-Security RX Pads”: miscompare at data offset 81,922, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Horiz/BMA Non-Security RX Pads”.
File “BMA 2150 White Script-Singleton”: miscompare at data offset 606,218, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Verticl/BMA 2150 White Script-Singleton”.
File “BMA 2170 White Script-C Frazier”: miscompare at data offset 512,002, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Verticl/BMA 2170 White Script-C Frazier”.
File “BMA 2186 White Script-Laur”: miscompare at data offset 577,586, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Verticl/BMA 2186 White Script-Laur”.
Can't read file “DOLCO BC Ramos/Hernandez”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-Misc/Dolco Packaging (Bill Cooke)/DOLCO Business Cards/DOLCO BCs/Dolco BCs 10up/DOLCO BC Ramos/Hernandez”.
Can't read file “accutech ACT 201 Letterhead”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Accutech Systems/accutech ACT 201 Letterhead”.
Can't read file “Allied rent no more Postcard”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Allied Home Mortgage/Rent No More postcard/Allied rent no more Postcard”.
Can't read file “coupon grouping copy.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Alltrista 3 Fair Coupon/Fair coupon/Art/coupon grouping copy.eps”.
Can't read file “Kerr 1.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 1.eps”.
Can't read file “Kerr 3 backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 3 backer.eps”.
Can't read file “Kerr 3.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 3.eps”.
Can't read file “Kerr 5 backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5 backer.eps”.
Can't read file “Kerr 5 blue backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5 blue backer.eps”.
Can't read file “Kerr 5 blue.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5 blue.eps”.
Can't read file “Kerr 5.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5.eps”.
Can't read file “JAR 402 P&C Env. Corporate”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Letterheads & Envelopes/Envelopes/JAR 402 P&C Env. Corporate”.
Can't read file “Elite Presentation Cover”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Misc/Elite Presentation Cover”.
File “Consumer DCRA (3)”: miscompare at data offset 13,874, path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/JARDEN Benefit Choices/Consumer Manufacturing Cloquet/(we don't print these sections)/Consumer DCRA (3)”.
Can't read file “A-06.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/A-06.DOT”.
Can't read file “Visor Program fix.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Booklets/Visor Programming Booklet/Visor Program fix.doc”.
Can't read file “BC User Manual rev 10-07-05.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BC User Manual rev 10-07-05.doc”.
Can't read file “BC User Manual rev 10-24-05.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BC User Manual rev 10-24-05.doc”.
Can't read file “Homelink WARRANTY.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Registration Cards/BC 202 Home Link Reg/Homelink WARRANTY.doc”.
Can't read file “Open House Card 2 up back”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bill Frazier Mobile Homes/Open House Card 2 up back”.
Can't read file “Elite's presort permit 228.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Mailers & Promo/Elite's presort permit 228.p65”.
File “GAM 100 Gyn Assoc Chg Slip”: miscompare at data offset 30,334, path: “Files Volume/Customer files/Elite/Brad/CHARGE SLIPS/GAM 100 Gyn Assoc Chg Slip”.
Can't read file “CIO BC Amy Myers Train.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/Bus Cards / Appt Cards/Individuals' BCs/CIO BC Amy Myers Train.pmd”.
Can't read file “CIO 281 Medical Release Form”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/CIO Forms/CIO 281 Medical Release Form”.
Can't read file “CIO 106 P & OT newest.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/CIO Forms/CIO 106/CIO 106 P & OT newest.pdf”.
Can't read file “CIO COLOR TABS 3 BANK”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/Misc/CIO COLOR TABS/CIO COLOR TABS 3 BANK”.
Can't read file “Cisco multi-ch 2-color.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Comcast/Flyers/Digital / Internet Flyers/6x9 69.95 Limited-time offer/Cisco multi-ch 2-color.eps”.
Can't read file “Z4935.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Comcast/Race for Cure ad/Z4935.eps”.
File “Comcast Rates Multi 6up”: miscompare at data offset 2,510,558, path: “Files Volume/Customer files/Elite/Brad/Comcast/Rate Cards & Channel Line-ups/ Comcast Rates & Lineups 2006/ trash before next run/Comcast Rates Multi 6up”.
Can't read file “Comcast Samples Digi Channels-5”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Comcast/Rate Cards & Channel Line-ups/ Comcast Rates & Lineups 2006/ trash before next run/Comcast Samples Digi Channels-5”.
Can't read file “FCC Bus Card logo.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/FCC (formerly Jaytec)/Business Cards/FCC Bus Card logo.bmp”.
File “FGC 200 PRAYER CHAIN”: miscompare at data offset 110,530, path: “Files Volume/Customer files/Elite/Brad/Four Square Church/FGC 200 PRAYER CHAIN”.
Can't read file “Icon◊”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/In Touch Dining (Table Talk)/Icon◊”.
Can't read file “Customer Service Record partial”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Marcum Racing/Customer Service Record partial”.
Can't read file “PE 400 #10 Window Envelope”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Peerless Electric/PE 400 #10 Window Envelope”.
Can't read file “spartech.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Spartech/spartech logos/spartech.doc”.
Can't read file “neb_Logo.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Northeast Bank/neb_Logo.bmp”.
Can't read file “logo1web.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/logo1web.tif”.
Can't read file “TSC 200 RX Pad”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/Fixed Files/TSC 200 RX Pad”.
Can't read file “TSC 104 and 111.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms 2/04/TSC 104 and 111.pdf”.
Can't read file “TSC 105 General Progress.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms 2/04/TSC 105 General Progress.pdf”.
Can't read file “sptslogo spot sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Sports Physical Therapy (SPTS)/logos & art/sptslogo spot sep.eps”.
Can't read file “A Stout BCs 10 up all names”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 10 up all names”.
Can't read file “A Stout BCs 12 up Sales”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 12 up Sales”.
Can't read file “A Stout BCs 12 up template”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 12 up template”.
Can't read file “AERCO Bryant 8-09-05.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/AERCO/AHC Bryant New Equip Line/AERCO Bryant 8-09-05.pmd”.
Can't read file “6HR_DRINK.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/03DET0609 (CGIC Prep 4)/Pictures/6HR_DRINK.tif”.
Can't read file “reprint-colonos prep2 fix.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/04DET0076 (CGIC Prep 1)/reprint-colonos prep2 fix.qxd”.
Can't read file “6HR_DRINK.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/03DET0609 (CGIC Prep 4)/Pictures/6HR_DRINK.tif”.
Can't read file “6HR_FOOD.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/03DET0609 (CGIC Prep 4)/Pictures/6HR_FOOD.tif”.
Can't read file “reprint-colonos prep2 fix.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/04DET0076 (CGIC Prep 1)/reprint-colonos prep2 fix.qxd”.
Can't read file “MAP_DUO.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/04DET0076 (CGIC Prep 1)/Pictures/MAP_DUO.tif”.
Can't read file “Beth Business Card.1”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/Beth Business Card.1”.
Can't read file “Lafayette_Logo.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/Lafayette_Logo.tif”.
Can't read file “ECG 302 (partial)”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/ECG Forms/ECG 302 (partial)”.
Can't read file “ECG 532 Surgery Chart Bond LH”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/ECG Forms/ECG 532 Surgery Chart Bond LH”.
Can't read file “carrick.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Memo Pads/ECG 506 From Desk Of/carrick.eps”.
Can't read file “ECG 506 note pad Steph Carrick”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Memo Pads/ECG 506 From Desk Of/ECG 506 note pad Steph Carrick”.
Can't read file “Confetti Canopy3.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Refer A Friend LVC Card/Confetti Canopy3.tif”.
Can't read file “ECG RX 03 B Cyclogel/Isopto”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 03 B Cyclogel/Isopto”.
Can't read file “ECG RX 03 Cyclogel/Homatropine”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 03 Cyclogel/Homatropine”.
Can't read file “ECG RX 13 Eye Center Group Sec.”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 13 Eye Center Group Sec.”.
Can't read file “ECG RX-17 Ocuflox 11/02”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 17/ECG RX-17 Ocuflox 11/02”.
Can't read file “Hoosier Lottery HL-ARC 8up.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Hoosier Lottery/Age Restriction Cards 2005/Hoosier Lottery HL-ARC 8up.pmd”.
Can't read file “oibcards3.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/IOH - Indy Ortho Hospital/Indiana Ortho Hospital logos/oibcards3.eps”.
File “calendarVickersFinal.p65”: miscompare at data offset 2,002,278, path: “Files Volume/Customer files/Elite/Dave/Neff Engineering/Neff Engineering Other/calendarVickersFinal.p65”.
File “Norfleet BC Jason 10up”: miscompare at data offset 1,760,878, path: “Files Volume/Customer files/Elite/Dave/norfleet BC/Norfleet BC Jason 10up”.
File “BCs-New-PM6.5”: miscompare at data offset 2,111,727, path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/Business Cards/BCs-New-PM6.5”.
Can't read file “OIK Miller Only”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/Business Cards/BCs-all old ones/OIK/OIK Miller Only”.
The only suggestion I have come across is to copy the files to another drive, but this is impossible because the problem files cannot be copied. If anyone has any other suggestion for fixing this, I would appreciate any input. Thanks.
Mac G3 Blue & White 300 mhz Mac OS X (10.3.9) Original hard drive replaced with a 120 GB Maxtor 6Y120P0Tech Tool, Disk Warrior, and Disk Utility all work to make sure the directory is Okay. They do not read every block.
I think you should do the surface scan you spoke of. What program do you use for this?
If you cannot copy a file in the Finder without an I/O error, the file is damaged or the drive had bad blocks.
Be sure you also downloaded the drivers module when you updated retrospect. -
Error while taking Backup using hpux tape drive
I got the following error while taking a backup.
ERROR: System Error, /opt/ignite/bin/make_medialif failed creating boot LIF
ERROR: Failed to generate LIF on tape.
ERROR: System Error, /opt/ignite/bin/make_medialif failed creating boot LIF
ERROR: Failed to generate LIF on tape.
make_medialif: ERROR: Cannot tar and gzip script files; possibly insufficient di
[24;1H[0K[7mscbackup.log (13%)[m[24;1H[0K/11[24;1H[24;1H[0Ksk space in /var/tmp/make_medialif8916.
======= 11/10/10 12:17:49 IST make_tape_recovery completed unsuccessfully
ERROR: Ignite tape writing phase had errors
Exit status: 1
How can this problem be resolved? Kindly drop in your comments and solutions.Hello Kulvinderbuttar,
I understand that you are not able to make the recovery media.
Are you using recovery media creation?
Here is a link to walk you through the steps to create the recovery media.
The flash drive that you are using needs to be empty and may need to be reformatted before you can make the recovery media.
Let me know how everything goes. -
hello,
everytime i try to copy a data from a 3490E ibm tape drive, when i punch the ''copy to deof'' errors like
''CANNOT READ MEDIUM: UNKNOWN FORMAT''
UNIT ATTENTION , ENQUIRE, DATA HAS CHANGED
Pls do assist.
mosesHi
Can you show us the output of
show file system
dir nvram
Do you get the startup config when you do a show start
And by the way why are you copying the startup config into the running config?
Thanks
Ankur
"Please rate the post if found useful" -
I'm Currently running solaris 9 and trying to hook up a
Eliant 820 tape drive. how do I modify the st.conf. is it
one line at a time ?. also is there a way to upgrade the firmware/ patches from solaris/sun?. all I get is I/O errors
everytime I run sunvts. I ran cleaning tapes/ new tapes
through about 3 times. I read something about
modyfying the st.conf.
I have no problems with the exabyte 8505 tape drives
just the eliant 820's.Hi Ketan,
>> unable to initialize ASPI manager
Check SCSI id on your tape device. Try to use different SCSI number or try install correct device driver of the tape device.
Best regards,
Orkun Gedik -
Tape initialization error at first time in DB13
Hi ,
first time While initializing tapes in DB13 , we are getting
error "<b>0003 Error during Tape initialization</b>".At OS ( HP-UX / Oracle), SAP R/3 4.72Enterprise.
level backup device initialized.I have enclosed logs ,please suggestto resolve this issue.
We ahve tape drive DLT 40/80GB.Can any one help me how to initialize the tape at first time scheduling backup.
Thanks,
ChimsikHi Chimsik
please find the below link
http://help.sap.com/saphelp_erp2005/helpdata/en/9c/7aea7b0dbd324ea40391f40b7a9f17/frameset.htm
Regards
shayi -
Hi,
I am trying to determine if a tape is full because on 2 different tapes (on 2 different SunOS servers), im receiving 2 different kind of errors:
What i want to verify is if both tapes are actually full, as i got different tar errors with the same status "sense key(0x13)= EOT".
# uname -a
SunOS SUN250 5.10 Generic_118833-33 sun4u sparc SUNW,Ultra-60
# /bin/tar cvf /dev/rmt/0n /export/home
a /export/home/jerry/wlserver_10.0.tar.gz 28528 tape blocks
tar: write error: unexpected EOF
# mt -f /dev/rmt/0n status
HP DDS-4 DAT (Sun) tape drive:
sense key(0x13)= EOT residual= 0 retries= 0
file no= 8 block no= 0
provadm@01:home/provadm%uname -a
SunOS 01 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-V245
provadm@01:provadm/tmp%tar cvf /dev/rmt/0n add.sh
a add.sh 1 tape blocks
tar: close error: I/O error
Oct 11 13:31:19 01 scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/pci@0/scsi@2/st@0,0 (st0):
Oct 11 13:31:19 01 Error for Command: write file mark Error Level: Fatal
Oct 11 13:31:19 01 scsi: [ID 107833 kern.notice] Requested Block: 1 Error Block: 1
Oct 11 13:31:19 01 scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: 9 $DR-1
Oct 11 13:31:19 01 scsi: [ID 107833 kern.notice] Sense Key: Volume Overflow
Oct 11 13:31:19 01 scsi: [ID 107833 kern.notice] ASC: 0x0 (end of partition/medium detected), ASCQ: 0x2, FRU: 0x0
Oct 11 13:31:19 01 scsi: [ID 107833 kern.notice] End-of-Media Detected
provadm@01:provadm/tmp%mt -f /dev/rmt/0n status
HP DAT-72 tape drive:
sense key(0x13)= EOT residual= 0 retries= 0
file no= 3778 block no= 1
provadm@01:provadm/tmp%
Many Thanks!!
Edited by: 964913 on Oct 12, 2012 2:19 AMWas it written to with tar?
I may be more inclined to use a dd command (piping output through strings in case of 'binary gibberish') ...
dd if=dev/rmt/1 ibs=8192 files=1 | strings
By the way, I see you are refering to /dev/rmt/0m ... more used to HP-UX by any chance? A better device name to use for compression in Solaris would be /dev/rmt/1c -
Tape drive and pci-x card with Solaris 10 on VMWare environment
I have a Sun X4170 server (x84_64) running VMWare ESXi 4.0. On it I have two VM guests- my production file server running Solaris 10 U7 and a test file server running Solaris 10 U9.
The X4170 has a PCI-X LSI Logic dual external U320 parallel scsi card. I have a tape drive + auto loader cabled to the X4170. It is a Quantum branded autoloader but I believe the tape drive itself is HP. The autoloader+tape drive share a single SCSI ID (6) but have separate LUNS.
I have two choices for making this system accessible to the OS:
- Virtualize the tape drive and loader individually.
- In VMWare, enable the scsi card as a pass through device. The SCSI card is then added as PCI device to the virtual machine (actually two devices since it is a dual scsi card.)
I had virtualized a single-drive tape drives with Vmware in the past.
However, when I tried I virtualize tape drive and loader, Solaris complained about the scsi id’s being invalid. I don’t think it likes two devices with a single scsi ID. Also, I think I need the backup software to see the REAL tape drive and autoloader (for inventory, changing tapes etc)
On the Solaris 10 U9 “Test” machine:
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
mpt1:scsi scsi-bus connected configured unknown
mpt1:scsi::rmt/0 tape connected configured unknown
mpt1:scsi::scsi/changer/c2t6d med-changer connected configured unknown
mpt2:scsi scsi-bus connected unconfigured unknown
cfgadm: Configuration administration not supported: Error: hotplug service is pr
obably not running, please use 'svcadm enable hotplug' to enable the service. Se
e cfgadm_shp(1M) for more details.
bash-3.00# mt status
/dev/rmt/0n: no tape loaded or drive offline
bash-3.00#
# svcadm enable hotplug
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
mpt1:scsi scsi-bus connected configured unknown
mpt1:scsi::rmt/0 tape connected configured unknown
mpt1:scsi::scsi/changer/c2t6d med-changer connected configured unknown
mpt2:scsi scsi-bus connected unconfigured unknown
pcie160 scsi/hp connected configured ok
pcie161 unknown empty unconfigured unknown
pcie162 unknown empty unconfigured unknown
On the Solaris 10 U7 “Production” machine:
The hotplug service did not exist until I installed the following patches
142934-02 SunOS 5.10_x86: failsafe patch
142910-17 SunOS 5.10_x86: kernel patch
144489-02 SunOS 5.10_x86: kernel patch
# svcadm enable hotplug
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
c1::scsi/direct/c1t0d0 disk connected configured unknown
c4 scsi-bus connected unconfigured unknown
c5 scsi-bus connected unconfigured unknown
pcie160 scsi/hp connected configured ok
Running “devfsadm –v “ does not change anything
Any ideas? Maybe a need to update the MPT driver or is that dangerous?
ThanksActually, updating the kernel patches (and enabling hot plug service) did solve the problem. At some point during between testing the system before and after patching, the tape drive got turned off. Since the system patching was being done remotely it was not immediately obvious that the tape drive was off.
-
How to create VTL and tape drives
hi!
i want to create one library like"vlib" containing two tape drives vt1 and vt2 having equal space of 512 MB.
Can u plz check that i am on right track
ob>mkdev -t library -o -S 2 -a test:/d01/secure/vlib -v vlib
ob>mkdev -t library -o -a test:/d01/secure/vt1 -v -l vlib -d 1 vt1
ob>mkdev -t library -o -S 2 -a test:/d01/secure/vt2 -v -l vlib -d 2 vt2
Insert Volume
now here is where i am confuse .....
ob>insertvol -L vlib -c 512 unlabeled 1-2
now how to insertvol in tapes .....by above command is this volume available to all tapes in that library.
actually i want that i have two tapes vt1 and vt2 ,both should have space 512 mb now when i take full database backup through rman ....after when vt1 becomes full it start utilizing other tape vt2 automatically.
plz helpppppppppthank you ....but please can u check that what i have done...i am giving detail......plzzz
STEP 1)
ob> mkdev -t library -o -S 2 -a test:/d01/secure/vlib -v vlib
ob> insertvol -L vlib -c 512 unlabeled 1-2
ob> lsvol -L vlib
Inventory of library vlib:
in 1: unlabeled, barcode fec96134fdea10285e7000c2944f637
in 2: unlabeled, barcode feef494efdea10285e7000c2944f637
ob> mkdev -t tape -o -a test:/d01/secure/vt1 -v -l vlib -d 1 vt1
ob> lsvol -L vlib -D vt1
Inventory of library vlib:
* in 1: unlabeled, barcode fec96134fdea10285e7000c2944f637
* in 2: unlabeled, barcode feef494efdea10285e7000c2944f637
*: in use list
ob> mkdev -t tape -o -a test:/d01/secure/vt2 -v -l vlib -d 2 vt2
ob> mkdev -t tape -o -a test:/d01/secure/vt3 -v -l vlib -d 3 vt3
STEP 2)
Then i created backup storage as RMAN default and selected vt1 as tape.
after that with rman i took full database backup.
ob> lsjob -l
oracle/6:
Type: database orcl (dbid=1233653080)
Scheduled time: none
State: processed; Oracle job(s) scheduled
Priority: 100
Run on host: (administrative server)
Attempts: 0
oracle/6.1:
Type: datafile backup
Backup piece: 13l69bcu_1_1
Family: RMAN-DEFAULT
Encryption: awaiting job completion
Scheduled time: none
State: running since 2010/02/17.22:58
Priority: 100
Run on host: test
Attempts: 1
[oracle@test ~]$ rman target /
Recovery Manager: Release 10.2.0.4.0 - Production on Wed Feb 17 21:58:07 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: ORCL (DBID=1233653080)
RMAN> run
2> {
3> allocate channel ch1 device type sbt;
4> backup database tag=fULLBACKUP1;
5> release channel ch1;
6> }
allocated channel: ch1
channel ch1: sid=134 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 17-FEB-10
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00001 name=/d01/app/oracle/product/10.2.0/oradata/orcl/system01.dbf
input datafile fno=00003 name=/d01/app/oracle/product/10.2.0/oradata/orcl/sysaux01.dbf
input datafile fno=00002 name=/d01/app/oracle/product/10.2.0/oradata/orcl/undotbs01.dbf
input datafile fno=00005 name=/d01/app/oracle/product/10.2.0/oradata/orcl/example01.dbf
input datafile fno=00004 name=/d01/app/oracle/product/10.2.0/oradata/orcl/users01.dbf
channel ch1: starting piece 1 at 17-FEB-10
channel ch1: finished piece 1 at 17-FEB-10
piece handle=13l69bcu_1_1 tag=FULLBACKUP1 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:09:22
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
including current control file in backupset
including current SPFILE in backupset
channel ch1: starting piece 1 at 17-FEB-10
channel ch1: finished piece 1 at 17-FEB-10
piece handle=14l69buk_1_1 tag=FULLBACKUP1 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:57
Finished backup at 17-FEB-10
released channel: ch1
ob> catxcr oracle/6
Error: unable to open transcript for oracle/6 - No such file or directory
oracle/6.1: 2010/02/17.22:58:52 ______________________________________________________________________
oracle/6.1: 2010/02/17.22:58:52
oracle/6.1: 2010/02/17.22:58:52 Transcript for job oracle/6.1 running on test
oracle/6.1: 2010/02/17.22:58:52
oracle/6.1: Volume label:
oracle/6.1: Volume tag: fec96134fdea10285e7000c2944f637
oracle/6.1: Volume UUID: 25fb9f22-fdf2-102c-a243-000c2944f637
oracle/6.1: Volume ID: RMAN-DEFAULT-000006
oracle/6.1: Volume sequence: 1
oracle/6.1: Volume set owner: root
oracle/6.1: Volume set created: Wed Feb 17 22:58:58 2010
oracle/6.1: Media family: RMAN-DEFAULT
oracle/6.1: Volume set expires: never; content manages reuse
oracle/6.1: Original UUID: 25fb9f22-fdf2-102c-a243-000c2944f637
oracle/6.1:
oracle/6.1: Archive label:
oracle/6.1: File number: 1
oracle/6.1: File section: 1
oracle/6.1: Owner: root
oracle/6.1: Client host: test
oracle/6.1: Backup level: 0
oracle/6.1: S/w compression: no
oracle/6.1: Archive created: Wed Feb 17 22:58:58 2010
oracle/6.1: Backup piece name: 13l69bcu_1_1
oracle/6.1: Backup db name: orcl
oracle/6.1: Backup db id: 1233653080
oracle/6.1: Backup copy number: not applicable
oracle/6.1: Backup content: full
oracle/6.1:
oracle/6.1:
oracle/6.1: End of tape has been reached. Please wait while I rewind and unload the tape.
oracle/6.1: The Volume ID of the next tape to be written is RMAN-DEFAULT-000007.
oracle/6.1: The tape has been unloaded.
oracle/6.1:
oracle/6.1: Volume label:
oracle/6.1: Volume tag: feef494efdea10285e7000c2944f637
oracle/6.1: Volume UUID: 27fb5faa-fdf3-102c-a243-000c2944f637
oracle/6.1: Volume ID: RMAN-DEFAULT-000007
oracle/6.1: Volume set ID: RMAN-DEFAULT-000006
oracle/6.1: Previous volume: RMAN-DEFAULT-000006
oracle/6.1: Volume sequence: 2
oracle/6.1: Volume set owner: root
oracle/6.1: Volume set created: Wed Feb 17 22:58:58 2010
oracle/6.1: Media family: RMAN-DEFAULT
oracle/6.1: Volume set expires: never; content manages reuse
oracle/6.1: Original UUID: 27fb5faa-fdf3-102c-a243-000c2944f637
oracle/6.1:
oracle/6.1: Archive label:
oracle/6.1: File number: 1
oracle/6.1: File section: 2
oracle/6.1: Owner: root
oracle/6.1: Client host: test
oracle/6.1: Backup level: 0
oracle/6.1: S/w compression: no
oracle/6.1: Archive created: Wed Feb 17 22:58:58 2010
oracle/6.1: Backup piece name: 13l69bcu_1_1
oracle/6.1: Backup db name: orcl
oracle/6.1: Backup db id: 1233653080
oracle/6.1: Backup copy number: not applicable
oracle/6.1: Backup content: full
oracle/6.1:
oracle/6.1:
oracle/6.1: Backup statistics:
oracle/6.1: status 0
oracle/6.1: devices vt1
oracle/6.1: devices 1
oracle/6.1: volumes RMAN-DEFAULT-000006 RMAN-DEFAULT-000007
oracle/6.1: voltags fec96134fdea10285e7000c2944f637 feef494efdea10285e7000c2944f637
oracle/6.1: file 1
oracle/6.1: host test
oracle/6.1: encryption on aes192
oracle/6.1: start_time Wed Feb 17 2010 at 22:58:58 (1266429538)
oracle/6.1: end_time Wed Feb 17 2010 at 23:07:31 (1266430051)
oracle/6.1: backup_time Wed Feb 17 2010 at 22:58:58 (1266429538)
oracle/6.1: dev_kbytes 668298
oracle/6.1: dev_iosecs 513
oracle/6.1: dev_iorate 1.3 MB/S
oracle/6.1: wrt_iosecs 508
oracle/6.1: wrt_iorate 1.3 MB/S
oracle/6.1: physical_blks_written 1336576
oracle/6.1: write_errors 0
oracle/6.1: physical_blks_read 0
oracle/6.1: read_errors 0
oracle/6.1: error_rate 0%
ob> lsvol -L vlib
Inventory of library vlib:
in 1: volume RMAN-DEFAULT-000006, barcode fec96134fdea10285e7000c2944f637, full, content manages reuse
in 2: volume RMAN-DEFAULT-000007, barcode feef494efdea10285e7000c2944f637, 368736 kb remaining, content manages reuse
STEP 3)
Then i took again full database backup just to verify that other tape drives will be use or not.....
RMAN> run
2> {
3> allocate channel ch1 device type sbt;
4> backup database tag=FULLBACKUP2;
5> release channel ch1;
6> }
allocated channel: ch1
channel ch1: sid=134 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 17-FEB-10
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00001 name=/d01/app/oracle/product/10.2.0/oradata/orcl/system01.dbf
input datafile fno=00003 name=/d01/app/oracle/product/10.2.0/oradata/orcl/sysaux01.dbf
input datafile fno=00002 name=/d01/app/oracle/product/10.2.0/oradata/orcl/undotbs01.dbf
input datafile fno=00005 name=/d01/app/oracle/product/10.2.0/oradata/orcl/example01.dbf
input datafile fno=00004 name=/d01/app/oracle/product/10.2.0/oradata/orcl/users01.dbf
channel ch1: starting piece 1 at 17-FEB-10
ob> catxcr oracle/8
Error: unable to open transcript for oracle/8 - No such file or directory
oracle/8.1: 2010/02/17.23:19:45 ______________________________________________________________________
oracle/8.1: 2010/02/17.23:19:45
oracle/8.1: 2010/02/17.23:19:45 Transcript for job oracle/8.1 running on test
oracle/8.1: 2010/02/17.23:19:45
oracle/8.1: Volume label:
oracle/8.1: Volume tag: feef494efdea10285e7000c2944f637
oracle/8.1: Volume UUID: 27fb5faa-fdf3-102c-a243-000c2944f637
oracle/8.1: Volume ID: RMAN-DEFAULT-000007
oracle/8.1: Volume set ID: RMAN-DEFAULT-000006
oracle/8.1: Previous volume: RMAN-DEFAULT-000006
oracle/8.1: Volume sequence: 2
oracle/8.1: Volume set owner: root
oracle/8.1: Volume set created: Wed Feb 17 22:58:58 2010
oracle/8.1: Media family: RMAN-DEFAULT
oracle/8.1: Volume set expires: never; content manages reuse
oracle/8.1: Original UUID: 27fb5faa-fdf3-102c-a243-000c2944f637
oracle/8.1:
oracle/8.1: Archive label:
oracle/8.1: File number: 3
oracle/8.1: File section: 1
oracle/8.1: Owner: root
oracle/8.1: Client host: test
oracle/8.1: Backup level: 0
oracle/8.1: S/w compression: no
oracle/8.1: Archive created: Wed Feb 17 23:19:51 2010
oracle/8.1: Backup piece name: 15l69ckd_1_1
oracle/8.1: Backup db name: orcl
oracle/8.1: Backup db id: 1233653080
oracle/8.1: Backup copy number: not applicable
oracle/8.1: Backup content: full
oracle/8.1:
oracle/8.1:
oracle/8.1: End of tape has been reached. Please wait while I rewind and unload the tape.
oracle/8.1: The Volume ID of the next tape to be written is RMAN-DEFAULT-000008.
oracle/8.1: The tape has been unloaded.
oracle/8.1:
oracle/8.1: Error: couldn't perform auto-swap - can't find usable volume in library (OB device mgr)
oracle/8.1: Enter a command from the following list:
oracle/8.1: load <n> .. load the tape from element <n> into the drive
oracle/8.1: unload <n> .. unload the tape from the drive into element <n>
oracle/8.1: help .. display other commands to modify drive's database
oracle/8.1: go .. to use the tape you selected
oracle/8.1: quit .. to give up and abort this backup or restore
oracle/8.1: :
ob> lsvol -L vlib
Inventory of library vlib:
in 1: volume RMAN-DEFAULT-000006, barcode fec96134fdea10285e7000c2944f637, full, content manages reuse
in 2: volume RMAN-DEFAULT-000007, barcode feef494efdea10285e7000c2944f637, full, content manages reuse
INVENTORY:
Inventory of library vlib:
in mte: vacant
in 1: volume RMAN-DEFAULT-000006, barcode fec96134fdea10285e7000c2944f637, oid 134, full, content manages reuse
in 2: volume RMAN-DEFAULT-000007, barcode feef494efdea10285e7000c2944f637, oid 136, full, content manages reuse
in dte1: vacant
in dte2: vacant
in dte3: vacant
PROBLEM:
now problem is that its waiting for input because both slots 1 and 2 are full ....my question is that it has 3 tape drives why its not using that????please can u answer............plzz
Edited by: Muhammad.Usman on Feb 17, 2010 11:48 AM -
Cannot able to take DB Backup to Tape Drive
Hi,
I cannot take DB backup from SQL server and also from SAP too. Its getting failure.
I changed the Tape drive and Tape also.
SAP DB13 error msg is below:
Executed as user: NT AUTHORITY\SYSTEM. ...ontact your system administrator. [SQLSTATE 01000] (Message 2528) Processed 10575360 pages for database 'APP', file 'APPDATA1' on file 1. [SQLSTATE 01000] (Message 4035) Processed 6256640 pages for database 'APP', file 'APPDATA2' on file 1. [SQLSTATE 01000] (Message 4035) Processed 6667936 pages for database 'APP', file 'APPDATA3' on file 1. [SQLSTATE 01000] (Message 4035) Processed 2857 pages for database 'APP', file 'APPLOG1' on file 1. [SQLSTATE 01000] (Message 4035) BACKUP DATABASE successfully processed 23502793 pages in 2029.133 seconds (94.885 MB/sec). [SQLSTATE 01000] (Message 3014) Processed 1568 pages for database 'master', file 'master' on file 2. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'master', file 'mastlog' on file 2. [SQLSTATE 01000] (Message 4035) BACKUP DATABASE successfully processed 1569 pages in 8.052 seconds (1.595MB/sec). [SQLSTATE 01000] (Message 3014) Processed 3016 pages for database 'ms... The step failed.
Regards
ThillaiHi Thillai,
Hope the below link helps you.
How to: Set the Expiration Date on a Backup (SQL Server Management Studio)
http://msdn.microsoft.com/en-us/library/ms188697.aspx
How to: Back Up a Database (SQL Server Management Studio)
http://msdn.microsoft.com/en-us/library/ms187510.aspx
Regards,
SBK -
Quantum P2000 tape library showing NOBARCODE on tape drive
Hi all,
We are having a tape library of ATL quantum P2000 which is having 4 tape drives.
In which we used to daily backup.
When ever we are keeping any new cartridges into the library we will run an inventory , During this time if their is any kind of cartridge in the tape drive their wont be any issue with that particular tape drive .
If not it is showing a problem of NO BAR CODE on the operator panel of the library.
and at this time it is not detecting on the legato software also.
Kindly help me in this .....
Thanks in Advance....
SWAROOPI will use new words to repeat my first reply:
You have broken hardware.
Broken hardware doesn't work when you expect it to work.
For example:
but why my tape drive is showing no bar code error when no tape is presentHow can a broken barcode reader give you an error when you don't have anything in the library that has a barcode on it?
Go contact whoever you use for repair services and get the library repaired. -
Hi Folks,
We have the following scenario:
- SunFire v490 server
- DAT 72 tape, SCSI
- LTO4 tape, FC (via qlogic HBA)
- Solaris 9 + updated patches
We need some help regarding the FC tape configuration. *"cfgadm -al"* shows the FC tape as:
c4::500110a0008a18eb tape connected configured unknownand *"ls -l shows"* :
lrwxrwxrwx 1 root root 68 Jan 31 14:16 /dev/rmt/1 -> ../../devices/pci@8,600000/SUNW,qlc@1/fp@0,0/st@w500110a0008a18eb,0:Wich is the tape's WWN. But when the tape drive status is invoked via "*mt -f /dev/rmt/1 status"* , it shows
/dev/rmt/1: No such device or addressWhat are we missing here?
Any suggestions will be greatly appreciated, thanks in advance,
SECHi,
Thanks for your responses, after installing the suggested patch in single user mode, performing reconfiguration reboot did not help.
The FC HBA is already configured and working, but qhe we try to reconfigure the drive it shows:
root@host1 # cfgadm -c configure c4::500110a0008a18eb
cfgadm: Library error: failed to create device node: 500110a0008a18eb: Invalid argumentAny help will be very appreciated,
SEC -
Error: getting dev info for Tape - unrecoverable error
Hi,
I have configured a Oracle Secure Backup version 10.4.0.1.0_LINUX64.
It was working corretly until yesteday that i can't mount the tape because this error appears:
Error: getting dev info for Tape - unrecoverable error
I run this command with obtool:
ob> lsdev -lvg
***0 wst__set_mode: bus 0, target 0, lun 0: IBM,ULTRIUM-HH4,B6W1
***0 wst__get_sn: code=0x0
***0 wst__info: infolen=0xd8, info=0x7fff007bf050
***0 wst__dev_state...
***0 wst__exec: op=0 (nop), buf=0x0, count=1 (0x1), parm=0x0
ioctl_op=0x3, to=300, datalen=0x0, buf=0x0
cdb: 00 00 00 00 00 00 tur
***0 wst__exec: op=2 (sense), buf=0xd1e2ec0, count=96 (0x60), parm=0x0
ioctl_op=0x5, to=30, datalen=0x60, buf=0xd1e2ec0
cdb: 03 00 00 00 60 00 sense, cnt=96
***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
***0 wst__get_sense(int) cmd = 0, sense data:
70 00 03 00 00 00 00 58 00 00 00 00 53 00 36 00
00 00 00 00 00 02 20 20 20 20 20 20 00 20 00 00
00 00 1E 00 00 1C 62 1E 81 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 07 08 18 00 00 00 00 00 00
00 00 00 00 00 00 20 20 20 20 20 20 20 20 20 20
ec=0, sk=media err, asc=53, ascq=0
error is: unrecoverable error
flags: (none)
***0 wst__exec: rval=-1, status.code/resid/checks=0x20008111/0x0/0x0
***0 wst__exec: op=7 (readpos), buf=0x7fff007bee60, count=20 (0x14), parm=0x0
ioctl_op=0x5, to=180, datalen=0x14, buf=0xd1e2fc8
cdb: 34 00 00 00 00 00 00 00 00 00 read_pos
***0 wst__exec: op=2 (sense), buf=0xd1e2ec0, count=96 (0x60), parm=0x0
ioctl_op=0x5, to=30, datalen=0x60, buf=0xd1e2ec0
cdb: 03 00 00 00 60 00 sense, cnt=96
***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
***0 wst__get_sense(int) cmd = 34, sense data:
70 00 03 00 00 00 00 58 00 00 00 00 53 00 36 00
00 00 00 00 00 02 20 20 20 20 20 20 00 20 00 00
00 00 1E 00 00 1C 62 1E 81 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 07 08 18 00 00 00 00 00 00
00 00 00 00 00 00 20 20 20 20 20 20 20 20 20 20
ec=0, sk=media err, asc=53, ascq=0
error is: unrecoverable error
flags: (none)
***0 wst__exec: rval=-1, status.code/resid/checks=0x20008111/0x0/0x0
***0 wst__dev_state: code=0x20008111
***0 wst__info: code=0x20008111
Error: getting dev info for Tape1 - unrecoverable error
***0 wst__conn_type returning 1 (code 0x0)
***0 wst__close: wh=0x0
Tape1:
Device type: tape
Model: [none]
Serial number: 1068037161
In service: yes
Automount: yes
Error rate: 8
Query frequency: [undetermined]
Debug mode: yes
Blocking factor: (default)
Max blocking factor: (default)
UUID: c60554ca-0562-1030-8cdb-d4ae528eb115
Attachment 1:
Host: bosmgmt.bos.local
Raw device: /dev/sg3
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-HH4
Firmware: B6W1
Serial number: 1068037161
Hardware compression: not available
Hardware encryption: not available
Thanks in advanceIt's reporting a hardware media error on the drive. Basically you've got a hardware fault.
Thanks
Rich
Maybe you are looking for
-
Can I have one cloud for my family with multiple devices and apple ids?
I need to know the best way to link multiple devices with different apple ids to the same iCloud to share iTunes and content.
-
Apple TV doesn't accept my Google + Youtube login.
I can't use my google and youtube account via login to youtube on my Apple TV, but same login works from my iPhone and computer so username and password is correct. Anyone else experiense this? have a solution?
-
I Non /I -secure weblog?
Hello, I've set up a weblog, but for some time I was having many problems with it - as in, I could only access it locally, it would take forever to load, and it wouldn't save my settings. I did some digging and found that everything would work if I a
-
Error:Unresolved dependencies
Hi, while installing patch for EP6 SP6.Im getting the error as in log file below. can anyone tell me how to fix this problem Dec 29, 2004 4:51:37 PM Info: Starting SDM - Software Deployment Manager... Dec 29, 2004 4:51:44 PM Info: tc/SL/SDM/SDM/sap
-
Completing the block step for parallel processing
Hello , I"m using a ParForEach block . It works fine and 2 approves get their decision task respectively , I want to end all parrallel processes if one of the approvers select the reject option . I thought it could be done using the