Tape drive permissions issues...

I've just recently upgraded one of our servers to Solaris 10 and users lost the ability to access the tape drive in our e250.
When users do a `tar tvf /dem/rmt/0` they get permission denied.
/etc/minor_perm
st:* 0666 root sys
ls -l /dev/rmt/*
lrwxrwxrwx   1 root     root          40 Jan 10 16:01 /dev/rmt/0 -> ../../devices/pci@1f,4000/scsi@3/st@5,0:
lrwxrwxrwx   1 root     root          41 Jan 10 16:01 /dev/rmt/0b -> ../../devices/pci@1f,4000/scsi@3/st@5,0:b
lrwxrwxrwx   1 root     root          42 Jan 10 16:01 /dev/rmt/0bn -> ../../devices/pci@1f,4000/scsi@3/st@5,0:bn
ls -ld /devices/pci@1f,4000/scsi@3/st*
drw-rw-rw-   2 root     sys          512 Jan 10 16:04 /devices/pci@1f,4000/scsi@3/st@5,0
c---------   1 root     other     33, 392 Jan 10 16:22 /devices/pci@1f,4000/scsi@3/st@5,0:
c---------   1 root     other     33, 456 Jan 10 16:22 /devices/pci@1f,4000/scsi@3/st@5,0:b
c---------   1 root     other     33, 460 Jan 10 16:22 /devices/pci@1f,4000/scsi@3/st@5,0:bnI've done a `reboot -- -r` and it comes up just the same each time... Am I missing something? Is there a way to make this persistent across reboots without having to create a startup script?

What is your user, root?
show me the output of the comand "ls -lL /dev/rmt/0"

Similar Messages

  • Sun StorEdge 2U SDLT 600 Tape Drive install issue

    After installing the tape drive and doing a scsi probe I get the following errors:
    ERROR: LSI1030 MPT FIRMWARE, FAULT CODE:
    8112: PCI BUS FAULT
    ERROR: LSI 1030 COULD NOT SET INITIATOR ID.
    CANT OPEN SCSI HOST ADAPTER.
    What would cause this? hardware is brand new also.

    Hi All,
    Thanks for your help.
    The problem is now solved when i proceeded as followed:
    1. When i executed the command cfgadm -al
    the output showed the below information about the tape drive controller:
    c3              Connected        unconfigured             OK
    I disconnected the controller and then run the devfsadm -c tapes which took about 1 hour to complete and then, now the system can detect and tape and the first backup run
    successfully.

  • USB Hard Drive Permissions Issue

    Hi,
    I just attached a new USB hard drive to my iMac. I would like to make it so only I can have write access to the drive; I want my kids to be able to see the files but not modify or delete.
    I tried by unchecking 'Ignore permissions', and setting permissions where I have read/write, and others have read, but when I switch to one of my kids' accounts, they have full control, and in fact they are shown as owner.
    Thanks for any help you can provide,
    Andy

    Hello Asopos,
    I have difficulty in reading the screenshots, you can post in the corresponding forum or add some comments.
    Set your Country/Region and Language Preferences
    http://technet.microsoft.com/en-us/SelectLocale?fromPage=http%253a%252f%252ftechnet.microsoft.com%252fen-us%252f
    If my understanding is right, in the USB-hard-drive(NTFS), all folders in the USB drive have the unknown account and the root of the drive don’t have the account.
    It is a SID. Possible that this account was removed and permission has not been removed.
    Please take ownership of the folder and check if we can normally deleted the account.
    http://technet.microsoft.com/en-us/library/cc753659.aspx
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Spotlight not finding files on my Hard Drive - permissions issue?

    I found that Spotlight in Mountain Lion was often not finding files when searching for words within the file (searching file names seemed to be OK).
    I found various threads suggesting that it may be a problem with File Permissions. I use Dropbox and was concerned it may have messed up permissions after a relinking a while ago.
    I tried to reset permissions from within Dropbox (under Settings, as suggested by some), but no help.
    Finally I found this EXCELLENT TIP to reset permissions from within the Repair Utility (in Mountain Lion), Not the Disk Utility, which I had not been aware of:https://discussions.apple.com/message/20421138#20421138
    It took a little while and then Spotlight re-indexed all my files. SO FAR it seems to be working well.
    THANK YOU!!

    Might try this...
    Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop for now...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • Permissions Issue, Colour Wheel, Hard Drive Issue??

    Hi!
    I have had issues with my mid 2009 MBP recently and I'm wondering what the best way to fix them would be. 
    First off, I have some major permissions issues with my accounts.  I am using 3 different users regualrly on the same machine and needed to access files from the home folder so I changed them a long time ago, and am not sure how to fix that.  I have repaired the permissions countless times in the disk utility and it seems like there's always loads more to do each time.  When I varify the disk, it says its all okay.
    Secondly, I have had the machine freeze on me several times while doing very little on it.  This happened awhile ago, and thought that it was just the permisions thing and so I did that again, and it started working better, for awhile.  It would go a few days or weeks before doing the same thing, sometimes not even getting past the apple logo on startup before freezing.  This makes me think it may be a hard drive issue???????
    This morning, I tried dozens of times to boot, with no success at all.....  until about the 25th time when it miraculasly booted.  I have run permissions repair a few more times and it seems to be working okay at the moment, but the problem seems to be happening more often over time. 
    To complicate matters, I am traveling at the moment and will not be home for several months.  I purchased an external harddrive last night and was able to successfully back up my data. 
    Question 1: Is it the permissions that are causing these problems, or is it related to something else.  The computer seems to work fine when its working, and then once in awhile, decides its not going to do anything. 
    Question 2:  Would upgrading to Lion (currently running 10.6.8) fix the permissions issues or just carry them forward?  I would like to consolidate the 3 users into one, if that would solve it.  Does the migration utility preserve permissions or does it give you a brand new start?
    Question 3:  If neither solving the permissions or the OS upgrade would fix the problem and it does need a new harddrive, is it possible to buy one and install it myself?  I do not have apple care left on this machine and am on a very tight budget.  I am used to taking things apart and all that as part of my job and it seems simple enough.  Where can you buy a replacement?? 
    Hopefully someone out there will be able to help me out on this one. 
    Cheers!!!!
    Brian

    bgroot422 wrote:
    First off, I have some major permissions issues with my accounts.  I am using 3 different users regularly on the same machine and needed to access files from the home folder so I changed them a long time ago, and am not sure how to fix that.  I have repaired the permissions countless times in the disk utility and it seems like there's always loads more to do each time.  When I verify the disk, it says its all okay.
    Disk Utility permissions are separate from User account permissions.
    This link is how to fix them
    https://discussions.apple.com/thread/2181549?start=0&tstart=0
    Disk Utility will always show something to be needing repair, but that's ok
    Apple supoort doc.
    https://support.apple.com/kb/TS1448?locale=da_DK
    Verify Disk is good, that's a good thing.
    To complicate matters, I am traveling at the moment and will not be home for several months.  I purchased an external hard drive last night and was able to successfully back up my data. 
    Your data is backed up, hopefully not with TimeMachine alone, but if you did, then get another drive and backup data manually to that as well. If the TM drive gets messed up, it's a pain to get your data off of it.
    Question 1: Is it the permissions that are causing these problems, or is it related to something else.  The computer seems to work fine when its working, and then once in awhile, decides its not going to do anything.
    Well you could call Apple for replacement 10.6.x disks, and just reinstall 10.6 and bundled programs, but this can kick out kext files out of the /System/Library/Extensions folder installed by some third party software.
    This method fixes OS X, but doesn't touch your files or most programs.
    Nor will this method fix your Users accounts if the issue is in there.
    A creation of a new user, then deletion of the others, return files from backup (set permissions) will fix User folder issues if the above user permissions fix doesn't work.
    (Of course you could wipe the drive from the 10.6 disk, but you have to install all software again)
    Would upgrading to Lion (currently running 10.6.8) fix the permissions issues or just carry them forward?
    No, you don't want to install Lion, it won't fix those issues in User folders, not only that Lion has it's own issues and doesn't work with a lot of older software etc.   No use clusterfscking a already bad situtation when it's seems it's only localized to the User accounts.
    I would like to consolidate the 3 users into one, if that would solve it.
    Yes that could very nicely and tidy up things in the process.
    What you do is transfer all files to one regular powered storage hard drive.
    (Don't use/disconnect the TimeMachine drive for this as it preserves the users seperated and you don't want all those users back restoring  with Migration Assistant)
    Create the New User on the machine as Admin, log into it and delete all the other Users, transfer all your files back from the regular storage drive, changing all the permissions to yourself before placing them into their respective folders as they will have three different permissions.
    Notes:
    If you have a extensive iTunes playlists on one User (say #1), then create the new user with that same name (will require some work, create User 4, delete Users 1-3, reboot, create User 1, delete User 4) then transfer your iTunes folder to Music of that User 1 (same name as before). This will preserve the pathnames of your song locations and your playlists will be preserved.
    (before you ask, no you can't combine playlists)
    Also if you have photo's in iPhoto Library, you have to right click on it and "show package contents" inside is a folder called Originals, copy them out and import into the iPhoto of the User #1.
    Does the migration utility preserve permissions or does it give you a brand new start?
    Yes it preserves user permissions, no it doesn't give you a brand new start. Only a fresh install, creation of new users and then just transferring of files does that.
    Nothing about TimeMachine or Migration Assistant gives one a "fresh start", it's if hosed, so is your restore.
    If you want that sort of pristine protection, you need to clone your ideal boot partition/drive using Carbon Copy Cloner (free/donationware) occasionally as a hold the option key bootable drive, then you can erase and reverse clone the pristine saved clone.
    One can also update the clone on occasion, this way keeping the clone pristine.
    I maintain 3 clones time dated, even have my boot drive partitioned 50/50 and auto-cloned, this way I have two boot partitions on the road and two externals at home.
    I never use TimeMachine, it's not bootable (well it is on 10.7.2 only to restore though)

  • Permissions Issue on Internal Hard Drive?

    I was having problems with an iMovie file, and I discovered that by moving that file to an external hard drive, the problems magically went away. I've noticed some other things as well—leading me to believe that I probably have a permissions issue with that original drive.
    I've done a "get info" on that drive and all privileges say "Red and Write." I've repaired permissions also, but it's less than confidence-instilling when it finds about 50 problems every time I do it and they're the same problems every time.
    Do the problems with this drive sound like a Permissions issue, a Privileges issue, or is it likely to be a different problem with this drive?

    Not Permissions, probably. More like Privileges. There are 2 drives that sometimes won't let me save things to them. It tells me I don't have privileges when I'm the only one who uses this Mac. Doesn't do it all the time—only under certain circumstances, which I haven't quite defined yet. I put that together with this iMovie problem on one of these drives and assumed that they went together.
    Again, iMovie was giving me buggy problems while the file was on that drive. Moved the file to an external drive and now it's stable as can be.

  • How do I migrate from one user to another to resolve sleep/permissions issues?

    My MacBook Pro's been having several issues, mainly with waking from sleep. I've tried Repairing Permissions, Repair Disk, running tools like OnyX and Drive Genius, but they can't find any issues. I checked the Console log, and there was some sort of denial from displaying the login window after I woke up from sleep.
    Initially I thought this had to do with some of my peripherals being plugged in when I already had the lid closed; the Mac would wake up, not realize the lid was closed, and never go back to sleep. Nothing--keyboard or trackpad touches--would wake the machine up. I'd have to hard reset by holding the Power button on.
    I had an Apple Genius suggest that I create a new user and test it out with the (same) default sleep settings as the buggy user account. It wakes up from sleep lightning fast, and has thus far never had any issues.
    I'm leaning toward sticking with this new user and migrating over my things bit by bit, to try and avoid potential permissions issues. But since I don't know where the source of this sleep problem lies, how should I go about it?
    I've read through Pondini's Transfer Guide here http://pondini.org/OSX/Transfer.html, but I'm just wondering where people would start, knowing that the machine has had permissions issues with some files. (The permissions issues, btw, I believe were caused by a mangled Time Machine restore. I replaced my internal HD with another one, but the Time Machine/Migration Assistant restore wasn't complete. I did it a second time from within the user account that got created, then tried to delete the malformed one and rename the complete one, but that's when the issues started.)

    I wasn't intending to move the entire home folder, rather, moving things like what's inside my Documents folder in chunks.
    From what I read, tracking down the origin of sleep/wake problems on a computer is notoriously hard, especially if Disk Utility and similar tools don't give any clues during Repair Disk or Repair Permissions. Creating the new user seemed to help, but I don't know why that alone would "fix" anything, so I haven't moved any files as of yet nor done anything with the new user account.
    Trying to move the things from my Library folder to my desktop also seems a bit risky; it's hidden in Lion and Mountain Lion because a lot of system files are there, right? Wouldn't moving them cause problems, not just help me find what file/folder (if any) could be the culprit?

  • "screen shot can't be saved" and other permissions issues

    After having my iMac at the Apple Store for four days solving a problem with "quit unexpectedly" issues with all Apple built-in Apps on OS X Yosemite, I got the machine back with those problems solved.  It involved re-installing OS X and restore files from backup.  I thought all was well; the Genius Bar dude showed me that it's fixed. He said it took so long because of bizarre permissions issues he'd never seen before.
    Now that I've lugged this 40lb machine back home (after verifying the fixes in the store) I now find that several (other) functions don't work.  When I try to do a screenshot, I get this message:"Your screen shot can't be saved.  You don't have permission to save this file in the location where screen shots are stored."  Message could have been more helpful; the "location" is the desktop.  Pretty descriptive, though.  Seems I can't save anything to the desktop.
    I tried creatng a folder on the desktop.  Got this message: "Finder wants to make changes. Type your password to allow this".  Type password and new folder appears.  Drag the new folder to the trash, get same message..
    I tried copying a file from a network drive to the desktop. I get this dialog: "Modifying Desktop requires and administrator name and password.  I clicked "authenticate" and after a 3 minute delay (with "Preparing.." ) I get this dialog; "Finder wants to make changes.  Type your password to allow this".  I type the password and the file appeared on the desktop.  Before the work at the Apple Store, this never happened.  BTW I have only one user account and it's marked "Allow user to administer this computer".  Thinking something might be goofy with the pw, I changed it (took 3 minutes to do, oddly) and rebooted. No joy. Same thing happens when I try to drag something from the desktop to the trash.  Long time "moving" message followed by having to provide and admin pw.
    I tried to save a Safari attachment to the Downloads folder and got this message: "Safari could not download the file xxxxx because there is not enough free disk space".  Since I have more than 600GB of available space, I think the message is wrong and that it's really a permission issue with the Downloads folder.
    Tried to reset the password again.  Click to unlock the Users & Groups panel, get "System Preferences is trying to unlock Users & Groups preferences.  Type your password to allow this".
    All this tells me that somehow Yosemite is in "nag" mode (reminiscent of Windows Vista.
    Any ideas?
    Chaz

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • -36 errors, can't copy files in finder or backup to tape drive

    Does anyone know what causes -36 errors and how we can eliminate them? We need to backup our files, but have been unable to do so due to -36 I/O errors in Retrospect. Files on which this error is reported by Retrospect will not copy in the finder, either. I think our hard drive may be bad. How can we recover our files if they cannot be backed-up or copied?
    We recently purchased a tape drive for backup, an Exabyte VXA-2 FireWire Tape Drive. We are using VXA-2 V23 (230m) 80GB/160/GB Data Cartridges. I have verified that this drive is supported by Retrospect and that we have the correct tape cartridge. We are backing up one partition of a hard drive that is divided into two partitions. One is the start-up partition, the other is a partition on which we store customer files. We are backing up the partition that stores customer files. The tape drive is attached to and backing up a Macintosh G3 that was recently upgraded from system 9 to OS X 10.3.9 (Panther). The hard drive was not re-formatted before OS X was installed. I have downloaded updates and updated our Retrospect to the latest Retrospect version 6.1.126. I keep getting read errors when trying to backup the customer files partition, although I have ran every good repair program I know of to that partition — TechTool, Disk Warrior and Disk Utility. The tests all say the drive is OK. The only test I have not done recently is a surface scan, as this is an over-night procedure, but plan to do it this evening. A surface scan was done at the beginning of January, but we have continued to have problems. Yesterday morning I ran Disk Utility and it verified that the partition was okay.
    I am fairly certain the problem is not with the tape drive, as a test backup up of some of the problem customer files to a file backup on the startup drive also produced many -36 errors. Also the tape drive worked on another Mac with no -36 errors.
    The following is an excerpt from the log of last night's backup when the program was backing up (this is a very small portion of the whole log, there was a very long list of files it reported read errors on) Following this excerpt is also an excerpt of errors reported while the program was trying to verify the backup:
    ∆ Retrospect version 6.1.126
    automatically launched at 2/20/2006 7:00 PM
    + Retrospect Driver Update, version 6.1.3.101
    + Normal backup using Files Volume M,W,F BU at 2/20/2006 7:00 PM
    To backup set Files Volume M,W,F Set…
    - 2/20/2006 7:00:20 PM: Copying Files Volume…
    Can't read file “•T+•Files Volume”, error -36 (i/o error, bad media?), path: “Files Volume/•T+•Files Volume”.
    Can't read file “•T+•Files Volume(1)”, error -36 (i/o error, bad media?), path: “Files Volume/•T+•Files Volume(1)”.
    Can't read file “•T+•Files Volume(2)”, error -36 (i/o error, bad media?), path: “Files Volume/•T+•Files Volume(2)”.
    Can't read file “BALANCE PLUS AGREEMENT2.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/BALANCE PLUS AGREEMENT2.p65”.
    Can't read file “Balance Plus Agreements”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/Balance Plus Agreements”.
    Can't read file “BALANCE PLUS.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/BALANCE PLUS.p65”.
    Can't read file “2000/#2(U)”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/cdcguide/2000/#2(U)”.
    Can't read file “New Accounts-CSB Final.PMD”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/New Accounts Brochures 10-05/New Accounts-CSB Final.PMD”.
    Can't read file “Pacesetter Ad.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Pacesetter Bank/Pacesetter Hometown Financing/Pacesetter Ad.tiff”.
    Can't read file “SUMMERTIME.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Summertime/SUMMERTIME.p65”.
    Can't read file “RiverFest Comcast1.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/Adelphia/Comcast Logos & Art/RiverFest Comcast1.EPS”.
    Can't read file “CHS logo converted to Photoshop”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/CHS Logo-Various forms/CHS logo converted to Photoshop”.
    Can't read file “CHS logo adjusted/Photoshop.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/CHS Logo-Various forms/Adjusted by Karen/CHS logo adjusted/Photoshop.eps”.
    Can't read file “FWOLO~13.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/FWO logos/FWO Logos Various Formats/EPS/FWOLO~13.EPS”.
    Can't read file “wellnotype.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/well logo for MGH/wellnotype.bmp”.
    Can't read file “spencer logo bw.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/spencer logo bw.eps”.
    Can't read file “spencer logo.TIF”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/spencer logo.TIF”.
    Can't read file “DOLCO 900 Master BC 10up old”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-Misc/Dolco Packaging (Bill Cooke)/DOLCO Business Cards/DOLCO BCs/Dolco BCs 10up/DOLCO 900 Master BC 10up old”.
    Can't read file “accutech logo color sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Accutech Systems/accutech logo color sep.eps”.
    Can't read file “Kerr 1 backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 1 backer.eps”.
    Can't read file “LNT price labels.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Jar Toppers / Gift Promo/email to discount labels/LNT price labels.eps”.
    Can't read file “A-09.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/A-09.DOT”.
    Can't read file “A-14.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/A-14.DOT”.
    Can't read file “B-21.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/B-21.DOT”.
    Can't read file “B-35.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/B-35.DOT”.
    Can't read file “Visor Install fix.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Booklets/Visor Installation Booklet/Visor Install fix.doc”.
    Can't read file “Visor Program (SD- 1030) B.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Booklets/Visor Programming Booklet/Visor Program (SD- 1030) B.doc”.
    Can't read file “BlueConnect_16pgInstall.qxp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/BlueConnect_16pgInstall.qxp”.
    Can't read file “BlueConnect_28pgUserREV.qxp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/BlueConnect_28pgUserREV.qxp”.
    Can't read file “BlueConnect Installation Instructions 2.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BlueConnect Installation Instructions 2.doc”.
    Can't read file “BlueConnect Installation Instructions rev 10-07-05.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BlueConnect Installation Instructions rev 10-07-05.doc”.
    Can't read file “BlueConnectInstall16pg.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BlueConnectInstall16pg.doc”.
    Can't read file “CONSUMER USERS MANUA1.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/CONSUMER USERS MANUA1.doc”.
    Can't read file “BlueConnect Reg Card.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Registration Cards/BC 203 BlueConnect Reg/BlueConnect Reg Card.doc”.
    Can't read file “Living Will insert p1.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Cresthaven Living Will Insert 1/06/Living Will insert p1.eps”.
    Can't read file “Living Will insert p2.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Cresthaven Living Will Insert 1/06/Living Will insert p2.eps”.
    Can't read file “Elm Ridge 4-c vets Page_1.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Elm Ridge Valor Hill/Elm Ridge 4-c vets Page_1.tiff”.
    Can't read file “Elm Ridge 4-c vets Page_2.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Elm Ridge Valor Hill/Elm Ridge 4-c vets Page_2.tiff”.
    Can't read file “Reply card APv.1 (Vets).eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Mailers & Promo/Acacia / Rose Hills mailers/PDFs Converted to art/Reply card APv.1 (Vets).eps”.
    Can't read file “FinancialPolicyBroch.pub”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/FinancialPolicyBroch.pub”.
    Can't read file “CIO logo color sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/Bus Cards / Appt Cards/CIO Logos/Art/CIO logo color sep.eps”.
    Can't read file “FCC Letterhead Indiana.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/FCC (formerly Jaytec)/Letterheads/Envelopes/Memo/FCC Letterhead Indiana.bmp”.
    Can't read file “habitat envelope.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Habitat for Humanity/habitat envelope.p65”.
    Can't read file “Page 2.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/In Touch Dining (Table Talk)/Platter Chatter - Don Halls/Fix in Quark then print to EPS/Page 2.eps”.
    Can't read file “brochure”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/My Hair Broker/brochure”.
    Can't read file “brochure-1”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/My Hair Broker/brochure-1”.
    Can't read file “brochure”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/My Hair Broker/My Hair Broker recovered files/brochure”.
    Can't read file “GIFTBOX.epsbitmap”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/CHARLES/MISC FILES/GIFTBOX.epsbitmap”.
    Can't read file “ASC LetterHeadFinal.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Accutech/original art (emailed)/ASC LetterHeadFinal.EPS”.
    Can't read file “TSC 104 and 111.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/Fixed Files/TSC 104 and 111.pdf”.
    Can't read file “TSC 116 Initial Note.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/Fixed Files/TSC 116 Initial Note.pdf”.
    Can't read file “sptslogo screen sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Sports Physical Therapy (SPTS)/logos & art/sptslogo screen sep.eps”.
    Can't read file “sptslogo spot sep cool gray.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Sports Physical Therapy (SPTS)/logos & art/sptslogo spot sep cool gray.eps”.
    Can't read file “A Stout BCs 12 up all names”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 12 up all names”.
    Can't read file “bifold on grstrosprep2.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/03DET0609 (CGIC Prep 4)/bifold on grstrosprep2.qxd”.
    Can't read file “MAP_DUO.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/04DET0076 (CGIC Prep 1)/Pictures/MAP_DUO.tif”.
    Can't read file “bifold on grstrosprep2.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/03DET0609 (CGIC Prep 4)/bifold on grstrosprep2.qxd”.
    Can't read file “Beth Business Card.2”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/Beth Business Card.2”.
    Can't read file “frankfort map gray.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/frankfort map gray.tif”.
    Can't read file “lafayette map.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/lafayette map.tif”.
    Can't read file “white county gray.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/white county gray.tif”.
    Can't read file “Hoosier Lottery HL-ARC.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Hoosier Lottery/Age Restriction Cards 2005/Hoosier Lottery HL-ARC.pmd”.
    Can't read file “HCI_card2.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Hunter Construction Inc./HCI_card2.tiff”.
    Can't read file “IOH 016 steroid epideral inject”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/IOH - Indy Ortho Hospital/IOH 016 steroid epideral inject”.
    Can't read file “IOHLOGO.TIF”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/IOH - Indy Ortho Hospital/Indiana Ortho Hospital logos/logo file from customer/IOHLOGO.TIF”.
    Can't read file “OIFI 610 Reg Env Fishers.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/Envelopes/OIFI 610 Reg Env Fishers.pmd”.
    Can't read file “ORTHO 542 Memo master stock 9up”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/ORTHO forms/ORTHO 542 Memo master stock 9up”.
    Can't read file “Ortho 542 memo NEW master.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/ORTHO forms/Ortho 542 memo NEW master.pmd”.
    Can't read file “SESC 042 Local Discharge.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/SESC Southeast Surgery Center/SESC 042 Local Discharge.pmd”.
    Can't read file “Richmond Baking from scan.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Richmond Baking/Richmond Baking from scan.eps”.
    Can't read file “RPL 300C 4-02.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Richmond Power & Light/RPL 300C 4-02.p65”.
    Can't read file “RPL lighter.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Richmond Power & Light/RPL lighter.pmd”.
    Can't read file “Burlington BLUE.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Unified Group Services/Burlington Motor Carriers/Burlington BLUE.eps”.
    Can't read file “Burlington RED.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Unified Group Services/Burlington Motor Carriers/Burlington RED.eps”.
    Can't read file “WW-SUMMER EVENT Postcard.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Wilson Wines/WW-SUMMER EVENT Postcard.p65”.
    Can't read file “OSBORNS.TIF”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Debbie/Albany EMS/AEMS spaghetti poster/OSBORNS.TIF”.
    Can't read file “BCH 7019 Physicians Orders”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Debbie/Blackford Community Hospital/BCH forms/BCH 7019 Physicians Orders”.
    Can't read file “BCH 7066 Outcomes Walk Test”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Debbie/Blackford Community Hospital/BCH forms/BCH 7066 Outcomes Walk Test”.
    EXCERPT FROM LOG WHEN TRYING TO VERIFY BACKUP:
    2/20/2006 10:51:12 PM: Comparing Files Volume…
    Can't read file “CS Booklet Acknow Form.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/AAAA/CS Booklet Acknow Form.pmd”.
    File “BV Layout First Quarter.pmd”: miscompare at data offset 221,055, path: “Files Volume/Customer files/Bill Morris/BV Layout First Quarter.pmd”.
    Can't read file “E FUNDS TRANSFER AGREE.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/E FUNDS TRANSFER AGREE.doc”.
    Can't read file “BALANCE PLUS AGREEMENT2”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/BALANCE PLUS AGREEMENT2”.
    Can't read file “Blackford Golf Club.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Blackford Golf Club/Blackford Golf Club.p65”.
    Can't read file “INVESTMENT BROCHURE 7-04.PMD”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Investment Brochure/INVESTMENT BROCHURE 7-04.PMD”.
    Can't read file “Pacesetter Stmt-Hartford 04 old”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Pacesetter Bank/Hartford City/Pacesetter Stmt-Hartford 04 old”.
    Can't read file “TELEBANKING.P65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Pacesetter Tele-Banking/TELEBANKING.P65”.
    Can't read file “ *chs FHC logos (USE ME)”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/CHS Logo-Various forms/ *chs FHC logos (USE ME)”.
    Can't read file “FWOLOG~D.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/FWO logos/FWO Logos Various Formats/EPS/FWOLOG~D.EPS”.
    Can't read file “FWOLO~18.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/FWO logos/FWO Logos Various Formats/EPS/FWOLO~18.EPS”.
    Can't read file “Jiont Replacement Logo.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/logos/Jiont Replacement Logo.bmp”.
    File “SV Name 1 line 8x40p.tif”: miscompare at data offset 994,239, path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/St. Vincent Scans/Logos/SV Name 1 line 8x40p.tif”.
    Can't read file “SV-birds to side, no addr.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/St. Vincent Scans/Logos/SV-birds to side, no addr.tiff”.
    Can't read file “Spencer logo bw.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/Spencer logo bw.bmp”.
    Can't read file “spencer printing”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/spencer printing”.
    File “Appt Cards No Logo 10-up”: miscompare at data offset 94,208, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/Appointment Cards/Appt Cards No Logo 10-up”.
    File “BMA 202,BMA 2114 10up Musselman”: miscompare at data offset 52,622, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/Appointment Cards/BMA 202,BMA 2114 10up Musselman”.
    File “BMA Non-Security RX Pads”: miscompare at data offset 81,922, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Horiz/BMA Non-Security RX Pads”.
    File “BMA 2150 White Script-Singleton”: miscompare at data offset 606,218, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Verticl/BMA 2150 White Script-Singleton”.
    File “BMA 2170 White Script-C Frazier”: miscompare at data offset 512,002, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Verticl/BMA 2170 White Script-C Frazier”.
    File “BMA 2186 White Script-Laur”: miscompare at data offset 577,586, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Verticl/BMA 2186 White Script-Laur”.
    Can't read file “DOLCO BC Ramos/Hernandez”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-Misc/Dolco Packaging (Bill Cooke)/DOLCO Business Cards/DOLCO BCs/Dolco BCs 10up/DOLCO BC Ramos/Hernandez”.
    Can't read file “accutech ACT 201 Letterhead”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Accutech Systems/accutech ACT 201 Letterhead”.
    Can't read file “Allied rent no more Postcard”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Allied Home Mortgage/Rent No More postcard/Allied rent no more Postcard”.
    Can't read file “coupon grouping copy.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Alltrista 3 Fair Coupon/Fair coupon/Art/coupon grouping copy.eps”.
    Can't read file “Kerr 1.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 1.eps”.
    Can't read file “Kerr 3 backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 3 backer.eps”.
    Can't read file “Kerr 3.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 3.eps”.
    Can't read file “Kerr 5 backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5 backer.eps”.
    Can't read file “Kerr 5 blue backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5 blue backer.eps”.
    Can't read file “Kerr 5 blue.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5 blue.eps”.
    Can't read file “Kerr 5.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5.eps”.
    Can't read file “JAR 402 P&C Env. Corporate”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Letterheads & Envelopes/Envelopes/JAR 402 P&C Env. Corporate”.
    Can't read file “Elite Presentation Cover”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Misc/Elite Presentation Cover”.
    File “Consumer DCRA (3)”: miscompare at data offset 13,874, path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/JARDEN Benefit Choices/Consumer Manufacturing Cloquet/(we don't print these sections)/Consumer DCRA (3)”.
    Can't read file “A-06.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/A-06.DOT”.
    Can't read file “Visor Program fix.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Booklets/Visor Programming Booklet/Visor Program fix.doc”.
    Can't read file “BC User Manual rev 10-07-05.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BC User Manual rev 10-07-05.doc”.
    Can't read file “BC User Manual rev 10-24-05.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BC User Manual rev 10-24-05.doc”.
    Can't read file “Homelink WARRANTY.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Registration Cards/BC 202 Home Link Reg/Homelink WARRANTY.doc”.
    Can't read file “Open House Card 2 up back”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bill Frazier Mobile Homes/Open House Card 2 up back”.
    Can't read file “Elite's presort permit 228.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Mailers & Promo/Elite's presort permit 228.p65”.
    File “GAM 100 Gyn Assoc Chg Slip”: miscompare at data offset 30,334, path: “Files Volume/Customer files/Elite/Brad/CHARGE SLIPS/GAM 100 Gyn Assoc Chg Slip”.
    Can't read file “CIO BC Amy Myers Train.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/Bus Cards / Appt Cards/Individuals' BCs/CIO BC Amy Myers Train.pmd”.
    Can't read file “CIO 281 Medical Release Form”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/CIO Forms/CIO 281 Medical Release Form”.
    Can't read file “CIO 106 P & OT newest.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/CIO Forms/CIO 106/CIO 106 P & OT newest.pdf”.
    Can't read file “CIO COLOR TABS 3 BANK”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/Misc/CIO COLOR TABS/CIO COLOR TABS 3 BANK”.
    Can't read file “Cisco multi-ch 2-color.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Comcast/Flyers/Digital / Internet Flyers/6x9 69.95 Limited-time offer/Cisco multi-ch 2-color.eps”.
    Can't read file “Z4935.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Comcast/Race for Cure ad/Z4935.eps”.
    File “Comcast Rates Multi 6up”: miscompare at data offset 2,510,558, path: “Files Volume/Customer files/Elite/Brad/Comcast/Rate Cards & Channel Line-ups/ Comcast Rates & Lineups 2006/ trash before next run/Comcast Rates Multi 6up”.
    Can't read file “Comcast Samples Digi Channels-5”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Comcast/Rate Cards & Channel Line-ups/ Comcast Rates & Lineups 2006/ trash before next run/Comcast Samples Digi Channels-5”.
    Can't read file “FCC Bus Card logo.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/FCC (formerly Jaytec)/Business Cards/FCC Bus Card logo.bmp”.
    File “FGC 200 PRAYER CHAIN”: miscompare at data offset 110,530, path: “Files Volume/Customer files/Elite/Brad/Four Square Church/FGC 200 PRAYER CHAIN”.
    Can't read file “Icon◊”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/In Touch Dining (Table Talk)/Icon◊”.
    Can't read file “Customer Service Record partial”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Marcum Racing/Customer Service Record partial”.
    Can't read file “PE 400 #10 Window Envelope”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Peerless Electric/PE 400 #10 Window Envelope”.
    Can't read file “spartech.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Spartech/spartech logos/spartech.doc”.
    Can't read file “neb_Logo.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Northeast Bank/neb_Logo.bmp”.
    Can't read file “logo1web.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/logo1web.tif”.
    Can't read file “TSC 200 RX Pad”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/Fixed Files/TSC 200 RX Pad”.
    Can't read file “TSC 104 and 111.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms 2/04/TSC 104 and 111.pdf”.
    Can't read file “TSC 105 General Progress.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms 2/04/TSC 105 General Progress.pdf”.
    Can't read file “sptslogo spot sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Sports Physical Therapy (SPTS)/logos & art/sptslogo spot sep.eps”.
    Can't read file “A Stout BCs 10 up all names”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 10 up all names”.
    Can't read file “A Stout BCs 12 up Sales”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 12 up Sales”.
    Can't read file “A Stout BCs 12 up template”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 12 up template”.
    Can't read file “AERCO Bryant 8-09-05.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/AERCO/AHC Bryant New Equip Line/AERCO Bryant 8-09-05.pmd”.
    Can't read file “6HR_DRINK.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/03DET0609 (CGIC Prep 4)/Pictures/6HR_DRINK.tif”.
    Can't read file “reprint-colonos prep2 fix.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/04DET0076 (CGIC Prep 1)/reprint-colonos prep2 fix.qxd”.
    Can't read file “6HR_DRINK.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/03DET0609 (CGIC Prep 4)/Pictures/6HR_DRINK.tif”.
    Can't read file “6HR_FOOD.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/03DET0609 (CGIC Prep 4)/Pictures/6HR_FOOD.tif”.
    Can't read file “reprint-colonos prep2 fix.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/04DET0076 (CGIC Prep 1)/reprint-colonos prep2 fix.qxd”.
    Can't read file “MAP_DUO.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/04DET0076 (CGIC Prep 1)/Pictures/MAP_DUO.tif”.
    Can't read file “Beth Business Card.1”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/Beth Business Card.1”.
    Can't read file “Lafayette_Logo.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/Lafayette_Logo.tif”.
    Can't read file “ECG 302 (partial)”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/ECG Forms/ECG 302 (partial)”.
    Can't read file “ECG 532 Surgery Chart Bond LH”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/ECG Forms/ECG 532 Surgery Chart Bond LH”.
    Can't read file “carrick.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Memo Pads/ECG 506 From Desk Of/carrick.eps”.
    Can't read file “ECG 506 note pad Steph Carrick”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Memo Pads/ECG 506 From Desk Of/ECG 506 note pad Steph Carrick”.
    Can't read file “Confetti Canopy3.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Refer A Friend LVC Card/Confetti Canopy3.tif”.
    Can't read file “ECG RX 03 B Cyclogel/Isopto”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 03 B Cyclogel/Isopto”.
    Can't read file “ECG RX 03 Cyclogel/Homatropine”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 03 Cyclogel/Homatropine”.
    Can't read file “ECG RX 13 Eye Center Group Sec.”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 13 Eye Center Group Sec.”.
    Can't read file “ECG RX-17 Ocuflox 11/02”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 17/ECG RX-17 Ocuflox 11/02”.
    Can't read file “Hoosier Lottery HL-ARC 8up.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Hoosier Lottery/Age Restriction Cards 2005/Hoosier Lottery HL-ARC 8up.pmd”.
    Can't read file “oibcards3.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/IOH - Indy Ortho Hospital/Indiana Ortho Hospital logos/oibcards3.eps”.
    File “calendarVickersFinal.p65”: miscompare at data offset 2,002,278, path: “Files Volume/Customer files/Elite/Dave/Neff Engineering/Neff Engineering Other/calendarVickersFinal.p65”.
    File “Norfleet BC Jason 10up”: miscompare at data offset 1,760,878, path: “Files Volume/Customer files/Elite/Dave/norfleet BC/Norfleet BC Jason 10up”.
    File “BCs-New-PM6.5”: miscompare at data offset 2,111,727, path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/Business Cards/BCs-New-PM6.5”.
    Can't read file “OIK Miller Only”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/Business Cards/BCs-all old ones/OIK/OIK Miller Only”.
    The only suggestion I have come across is to copy the files to another drive, but this is impossible because the problem files cannot be copied. If anyone has any other suggestion for fixing this, I would appreciate any input. Thanks.
    Mac G3 Blue & White 300 mhz   Mac OS X (10.3.9)   Original hard drive replaced with a 120 GB Maxtor 6Y120P0

    Tech Tool, Disk Warrior, and Disk Utility all work to make sure the directory is Okay. They do not read every block.
    I think you should do the surface scan you spoke of. What program do you use for this?
    If you cannot copy a file in the Finder without an I/O error, the file is damaged or the drive had bad blocks.
    Be sure you also downloaded the drivers module when you updated retrospect.

  • Permissions Issues

    I am sure that most of you who read these forums already know about recent updates that create permissions issues. I was not sure how to deal with them and needed to verify for myself what was causing them and to convince myself that they are benign. I just wanted to share the evidence with you that I monitored over a day. Specifically, what is causing these benign permissions errors are three Apple updates: Front Row Update (2.1.7) 13.3 MB (worst offender), iTunes (8.1) 65.4 MB, and iLife Support (9.0.1) 3.7 MB. I assume Apple has heard about this by now. Here are my lengthy test results:
    OSX 10.5.0 is installed.
    03-21-2009 12:51 A.M.
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Permissions repair complete
    (A disk image of the hard drive is made during this time, from the install DVD)
    03-21-2009 1:49 AM
    OSX 10.5.1 Update is installed.
    03-21-2009 1:55 AM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    ACL found but not expected on "private/var/root/Library/Preferences".
    ACL found but not expected on "private/var/root/Library".
    ACL found but not expected on "private/var/root".
    Permissions repair complete
    03-21-2009 1:58 AM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    ACL found but not expected on "private/var/root/Library/Preferences".
    ACL found but not expected on "private/var/root/Library".
    ACL found but not expected on "private/var/root".
    Permissions repair complete
    03-21-2009 2:18 AM
    OSX 10.5.2 Update is installed.
    03-21-2009 2:22 AM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    ACL found but not expected on "private/var/root/Library/Preferences".
    ACL found but not expected on "private/var/root/Library".
    ACL found but not expected on "private/var/root".
    Permissions repair complete
    (Adobe Flash Player was installed).
    03-21-2009 3:06 AM
    OSX 10.5.3 Update is installed.
    03-21-2009 3:34 AM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    ACL found but not expected on "private/var/root/Library/Preferences".
    ACL found but not expected on "private/var/root/Library".
    ACL found but not expected on "private/var/root".
    Permissions differ on "Library/Internet Plug-Ins/Flash Player.plugin/Contents/Resources/English.lproj/Localized.rsrc", should be -rw-rw-r-- , they are -rw-r--r-- .
    Permissions differ on "Library/Internet Plug-Ins/flashplayer.xpt", should be -rw-rw-r-- , they are -rw-r--r-- .
    Permissions differ on "Library/Internet Plug-Ins/Flash Player.plugin/Contents/Resources/ko.lproj/Localized.rsrc", should be -rw-rw-r-- , they are -rw-r--r-- .
    Permissions differ on "Library/Internet Plug-Ins/Flash Player.plugin/Contents/Resources/zh_CN.lproj/Localized.rsrc", should be -rw-rw-r-- , they are -rw-r--r-- .
    Permissions differ on "Library/Internet Plug-Ins/Flash Player.plugin/Contents/Resources/zh_TW.lproj/Localized.rsrc", should be -rw-rw-r-- , they are -rw-r--r-- .
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions repair complete
    03-21-2009 3:41 AM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    ACL found but not expected on "private/var/root/Library/Preferences".
    ACL found but not expected on "private/var/root/Library".
    ACL found but not expected on "private/var/root".
    Permissions repair complete
    03-21-2009 4:07 AM
    OSX 10.5.4 Update is installed.
    03-21-2009 4:16 AM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    ACL found but not expected on "private/var/root/Library/Preferences".
    ACL found but not expected on "private/var/root/Library".
    ACL found but not expected on "private/var/root".
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions repair complete
    03-21-2009 4:20 AM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    ACL found but not expected on "private/var/root/Library/Preferences".
    ACL found but not expected on "private/var/root/Library".
    ACL found but not expected on "private/var/root".
    Permissions repair complete
    03-21-2009 4:40 AM
    OSX 10.5.5 Update is installed.
    03-21-2009 5:08 AM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    ACL found but not expected on "private/var/root/Library/Preferences".
    ACL found but not expected on "private/var/root/Library".
    ACL found but not expected on "private/var/root".
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions repair complete
    03-21-2009 5:13 AM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    ACL found but not expected on "private/var/root/Library/Preferences".
    ACL found but not expected on "private/var/root/Library".
    ACL found but not expected on "private/var/root".
    Permissions repair complete
    03-21-2009 6:00 AM
    OSX 10.5.6 Update is installed.
    03-21-2009 6:11 AM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    ACL found but not expected on "private/var/root/Library/Preferences".
    ACL found but not expected on "private/var/root/Library".
    ACL found but not expected on "private/var/root".
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions repair complete
    03-21-2009 6:16 AM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    ACL found but not expected on "private/var/root/Library/Preferences".
    ACL found but not expected on "private/var/root/Library".
    ACL found but not expected on "private/var/root".
    Permissions repair complete
    (Long break)
    03-21-2009 5:57 PM
    SOFTWARE UPDATE RUN
    Updates Listed:
    Airport Utility (5.3.2) 10.5 MB
    Airport Utility Software Update (5.4.1) 19.5 MB
    QuickTime (7.6) 75.1 MB
    iTunes (8.1) 65.4 MB
    iLife Support (9.0.1) 3.7 MB
    Airport Client Update 2009-001 (1.0) 1.8 MB
    Java For Mac OS X 10.5 Update 2 (1.0) 136 MB
    Safari (3.2.1) 39.9 MB
    Security Update 2009-001 (1.0) 44.1 MB
    This Update was installed:
    Security Update 2009-001 (1.0) 44.1 MB
    (auto reboot)
    03-21-2009 6:30 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions repair complete
    03-21-2009 6:37 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions repair complete
    03-21-2009 6:38 PM
    SOFTWARE UPDATE RUN
    Updates Listed:
    Airport Utility (5.3.2) 10.5 MB
    Airport Utility Software Update (5.4.1) 19.5 MB
    QuickTime (7.6) 75.1 MB
    iTunes (8.1) 65.4 MB
    iLife Support (9.0.1) 3.7 MB
    Airport Client Update 2009-001 (1.0) 1.8 MB
    Java For Mac OS X 10.5 Update 2 (1.0) 136 MB
    Safari (3.2.1) 39.9 MB
    This Update was installed:
    Java For Mac OS X 10.5 Update 2 (1.0) 136 MB
    (manual reboot)
    03-21-2009 7:40 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions repair complete
    03-21-2009 7:44 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions repair complete
    03-21-2009 7:45 PM
    SOFTWARE UPDATE RUN
    Updates Listed:
    Airport Utility (5.3.2) 10.5 MB
    Airport Utility Software Update (5.4.1) 19.5 MB
    QuickTime (7.6) 75.1 MB
    iTunes (8.1) 65.4 MB
    iLife Support (9.0.1) 3.7 MB
    Airport Client Update 2009-001 (1.0) 1.8 MB
    Safari (3.2.1) 39.9 MB
    Java for Mac OS X 10.5 Update 3 (1.0) 2.9 MB
    This Update was installed:
    Java for Mac OS X 10.5 Update 3 (1.0) 2.9 MB
    (manual reboot)
    03-21-2009 7:54 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions repair complete
    03-21-2009 8:06 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions repair complete
    03-21-2009 8:08 PM
    SOFTWARE UPDATE RUN
    Updates Listed:
    Airport Utility (5.3.2) 10.5 MB
    Airport Utility Software Update (5.4.1) 19.5 MB
    QuickTime (7.6) 75.1 MB
    iTunes (8.1) 65.4 MB
    iLife Support (9.0.1) 3.7 MB
    Airport Client Update 2009-001 (1.0) 1.8 MB
    Safari (3.2.1) 39.9 MB
    This Update was installed:
    Airport Utility (5.3.2) 10.5 MB
    (manual reboot)
    03-21-2009 8:16 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions repair complete
    03-21-2009 8:21 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions repair complete
    03-21-2009 8:33 PM
    SOFTWARE UPDATE RUN
    Updates Listed:
    Airport Utility Software Update (5.4.1) 19.5 MB
    QuickTime (7.6) 75.1 MB
    iTunes (8.1) 65.4 MB
    iLife Support (9.0.1) 3.7 MB
    Airport Client Update 2009-001 (1.0) 1.8 MB
    Safari (3.2.1) 39.9 MB
    This Update was installed:
    Airport Utility Software Update (5.4.1) 19.5 MB
    (manual reboot)
    03-21-2009 8:47 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions repair complete
    03-21-2009 8:50 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions repair complete
    03-21-2009 8:52 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions repair complete
    03-21-2009 9:00 PM
    SOFTWARE UPDATE RUN
    Updates Listed:
    QuickTime (7.6) 75.1 MB
    iTunes (8.1) 65.4 MB
    iLife Support (9.0.1) 3.7 MB
    Airport Client Update 2009-001 (1.0) 1.8 MB
    Safari (3.2.1) 39.9 MB
    This Update was installed:
    Airport Client Update 2009-001 (1.0) 1.8 MB
    (auto reboot)
    03-21-2009 9:06 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions repair complete
    03-21-2009 9:10 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions repair complete
    03-21-2009 9:15 PM
    SOFTWARE UPDATE RUN
    Updates Listed:
    QuickTime (7.6) 75.1 MB
    iTunes (8.1) 65.4 MB
    iLife Support (9.0.1) 3.7 MB
    Safari (3.2.1) 39.9 MB
    This Update was installed:
    Safari (3.2.1) 39.9 MB
    (auto reboot)
    03-21-2009 9:24 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions repair complete
    03-21-2009 9:26 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions repair complete
    03-21-2009 9:31 PM
    SOFTWARE UPDATE RUN
    Updates Listed:
    QuickTime (7.6) 75.1 MB
    iTunes (8.1) 65.4 MB
    iLife Support (9.0.1) 3.7 MB
    This Update was installed:
    iLife Support (9.0.1) 3.7 MB
    (auto reboot)
    03-21-2009 9:40 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions repair complete
    03-21-2009 9:44 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions repair complete
    03-21-2009 9:46 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions repair complete
    CONCLUSION: This is one of Apple's infamous permissions error that just "has to be ignored" and will not get fixed.
    03-21-2009 9:53 PM
    SOFTWARE UPDATE RUN
    Updates Listed:
    QuickTime (7.6) 75.1 MB
    iTunes (8.1) 65.4 MB
    This Update was installed:
    QuickTime (7.6) 75.1 MB
    (auto reboot)
    03-21-2009 10:01 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions repair complete
    03-21-2009 10:05 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions repair complete
    03-21-2009 10:15 PM
    SOFTWARE UPDATE RUN
    Updates Listed:
    iTunes (8.1) 65.4 MB
    Front Row Update (2.1.7) 13.3 MB
    This Update was installed:
    iTunes (8.1) 65.4 MB
    NOTES:
    iTunes Description Reads:
    iTunes 8.1 is now faster and more responsive. You will enjoy noticeable improvements when working with large libraries, browsing the iTunes Store, preparing to sync with iPod or iPhone, and optimizing photos for syncing.
    In addition, iTunes 8.1 provides many other improvements and bug fixes, including:
    • Supports syncing with iPod shuffle (3rd generation).
• Allows friends to request songs for iTunes DJ.
• Adds Genius sidebar for your Movies and TV Shows.
• Improves performance when downloading iTunes Plus songs.
• Provides AutoFill for manually managed iPods.
• Allows CDs to be imported at the same sound quality as iTunes Plus.
• Includes many accessibility improvements.
• Allows iTunes U and the iTunes Store to be disabled separately using Parental Controls.
    For information on the security content of this update, please visit this website: http://support.apple.com/kb/HT1222
    Front Row Update Reads:
    This Front Row update provides improved iTunes 8.1 compatibility.
    (This implies that iTunes 8.1 should be installed BEFORE Front Row Update 2.1.7)
    (manual reboot)
    03-21-2009 10:29 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/LaunchDaemons/com.apple.usbmuxd.plist", should be -rw-r--r-- , they are -rwxr-xr-x .
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions repair complete
    03-21-2009 10:39 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions repair complete
    03-21-2009 10:55 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions repair complete
    03-21-2009 10:59 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions repair complete
    CONCLUSION: This is one of Apple's infamous permissions error that just "has to be ignored" and will not get fixed.
    03-21-2009 11:00 PM
    SOFTWARE UPDATE RUN
    Updates Listed:
    Front Row Update (2.1.7) 13.3 MB
    This Update was installed:
    Front Row Update (2.1.7) 13.3 MB
    (Manual reboot)
    03-21-2009 11:12 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions repair complete
    03-21-2009 11:22 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions repair complete
    03-21-2009 11:28 PM
    Disk Permissions Repaired. Results:
    Repairing permissions for “Mac”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions repair complete
    CONCLUSION: This is one of Apple's infamous permissions error that just "has to be ignored" and will not get fixed.
    03-21-2009 11:39 PM
    SOFTWARE UPDATE RUN
    Updates Listed:
    MESSAGE: "Your software is up to date."
    FINAL CONCLUSION:
    The following installers create unusual Permissions issues that do not seem to go away but seem to not be a danger.
    Front Row Update (2.1.7) 13.3 MB (worst offender)
    iTunes (8.1) 65.4 MB
    iLife Support (9.0.1) 3.7 MB

    GWD2008,
    I too am having permissions issues with Front Row, iTunes, and iLife it happen just after the update. However researching into the problem they are just shortcuts to an original files. Which on the original files Permissions are correct and the reason the permissions are wrong on the shortcuts is because of the little l. I was unable to fix the permission error myself in Terminal and in Finder. And in my opinion as long as the programs are running with no problems its nothing to be to concerned over. As for ACL or SUID files you can just ignore according to apple. See this link: http://support.apple.com/kb/TS1448
    Resolution
    You can safely ignore any "SUID file" or "ACL found but not expected..." message. These messages are accurate but are not a cause for concern.

  • Permissions Issues or Just A Midlife Crisis?

    A little background:  All of my computers are running Windows 8.1 Pro.  I have an HP Officejet Pro 8600 Plus Printer.  I'm trying to setup scan-to-computer so I can scan from the printer's front panel to any computer on the network.
    Here's the dilly:  I have two laptops which I installed the full feature driver on from HP's website.  I only use these computers with an administrator account.  There are no other user accounts on the computer.  Works flawlessly.  I'm able to login and scan something from the printer's control panel to the computer right away.
    Here's where it gets a little hairy:  I have two desktops that I've installed the same full feature driver on from HP's website.  On each desktop there is an administrator account and two standard user accounts.  I login with the administrator account.  The software works flawlessly.  I'm able to scan-to-computer right away with no problems at all.  However, when I login to either standard user account I get the following "Scan to Computer is currently unavailable" dialog box everytime I restart the computer or logout and log back in:
    During this time I'm unable to scan anything from the printer control panel to the computer as the printer will not find the computer on the network.  If I leave the dialog box up without dismissing it the message automatically changes to the following "Scan to Computer is enabled" within about a minute or so:
    The dialog box stays up and I have to dismiss it everytime but after it changes to "scan to computer is enabled" I'm able to scan flawlessly to the standard user account without problems.  My question is how do I prevent this dialog box from happening?  Is it something on my end that needs fixed or a bug in the software that only HP can fix?  It seems like maybe I'm having a permissions issue somewhere since this dialog box doesn't pop up for the computer administrator accounts and only pops up for standard user accounts.  

    Thanks for all your responses and help on this.  I was able to resolve this issue on my own in case anyone was wondering (but you probably weren't judging by all your chattiness).
    But in case you were here's what I did:  From each standard user account I had to open the printer software then click on "Utilities" at the top.  From there I clicked on "Printer Setup & Software" and was prompted for the administrator password which I entered.  Then click "Connect a New Printer" and follow the steps to connect a new printer.  Then I restarted the computer and the Scan to Computer dialog boxes for the standard users were gone and I could scan from the printer's front panel!

  • Tape Drives set automatically to 1

    Hi all,
    After I set some configuration in the "Backup Settings", I found that "Tape Drives" filed is automatically filled with the value: "1". I tested the issue on may machines and the result was the same.
    Steps to generate the issue:
    1. Login to the Database Control EM as SYS
    2. Follow the following links:
    Maintenace Tab -> Backup Settings -> Backup Set
    3. Set "Maximum Backup Piece (File) Size" to 4 GB
    4. Click on "Policy" link
    5. Mark the checkbox "Automatically Backup Controlfile ..."
    6. Set "Retain backups that are necessary for a recovery .." to 2 Days
    7. Click on "OK" button
    Now the settings should be saved. Click again on "Backup Settings", you will see that "Tape Drives" field is filled with "1". By the way, NO tape is installed on the machine.
    This leads me to many problems. For example, trying to recover a tablespace failed because RMAN is creating channel of Tape type (although I sat Disk as the default channel)
    I hope to see any help on this issue here because it caused me many problems.
    Thanks in advance.
    Oracle 10g R2 on Windows XP SP2.

    This is bug 4338664 "EM DBCONSOLE DEFAULTS TO SBT_TAPE REGARDLESS OF RMAN SETTINGS"
    Open a RMAN command session and remove the tape setting:
    <RMAN Configure CHANNEL device type 'SBT_TAPE' clear;
    Werner

  • Exabyte VXA-2e Firewire Tape Drive Software recommendations

    Hi all.
    I have an old Exabyte VXA-2e Firewire Tape Drive that I keep around to access the old tapes. Moving from computer to computer I eventually started using TimeMachine for backup to SATA Externals. I moved important stuff off of the tapes to get faster access to the stuff I backed up.
    I am running out of space again and decided I am going to build or buy some type of NAS box. This will involve buying some more drives ultimately and maybe some new backup software that will run off of a server. I am thinking of just using Time Machine over a network but I haven't decided yet.
    Unfortunately while cleaning some drives and getting rid of old software and documents to make more space for new stuff I wiped a system disk that was on the G4 this was running on. The Exabyte VXA-2e Firewire Tape Drive came with included software when I bought it. I am pretty sure it was some light edition of Retrospect but I can't recall. I have the old G4 (not in service minus drives), a Power Mac G5, an iMac, and Mac Pro Tower.
    Here is my delema. I want to get the VXA working again as I still have some files on there that I never went through. I would also like to use it for as long as it will run as a redundant backup system. I have run out of space on all the drives I currently have and will most likely just buy an external harddrive but until I get the more expensive NAS up and running I would like to avoid spending any unnecessary funds. Since I can't locate the cd with the driver and software I looked on their site. Retrospect has changed hands several times and there is no availble downloads other than the Utility. Oddly enough I found my CD storage box and I have every other OS, Utility, Script, etc that I have ever used so I am thinking it's lost or fell out of the box during a move.
    Can anyone recommend some very inexpensive software that will backup (and control) the tape drive? I am willing to use open source/free alternatives or to buy used software. I thought about an old copy of Retrospect but I can find any. The new stuff looks great but since the minimum will require slapping down about a bill ($100) I figured that I should just use that money to buy an external in the next couple of days while I sort out the bigger more robust NAS plan. I also looked for BRUs lite software but they don't sell it anymore.
    BRU is a good product but it's out of the budget for now at least until I figure out the NAS.
    I just need some creative thinkers to make some suggestions that I might be able to employ so I can start cleaning off some of the other drives because I plan to use the SATA I, II, and III drives I have to put in the NAS. I will probably use PCIe cards or firewire/usb host cards to ulitize all the drives. You might be wondering why I want to save so much data and it's really simple. I have asset libaries and client work product which I often need to go back to either because they want some element re-done in a fresh way or because I can actually re-use some work product on new projects for other clients. I often take mockups and demos and re-cycle them by submitting them on new projects so I can offer more than one choice to clients during demo submissions.
    Anyone got any ideas?

    Hi Ivan,
    Thanks for taking the time to link to this. It will probably help someone else. Yes you are correct. I believe that it is the full installer. I made this post then went and looked at the box I had. It's Retrospect Express. I probably should have been clearer on that. I believe Retrospect Express is a light edition.
    I did try that installer and it doesn't look like the version I was using. For some reason I am thinking it was version 4.x or 5.x Another issue is that the version you linked to required a license. I don't recall if the version I had needed one but if it did I would have kept it with the disk in a disk box I have. It's not in the box.
    I also contacted Retrospect and sent them the license and asked if they could help or make a suggestion. Their reply was "The program is not supported anymore and due to change of hands we no longer have records regarding your registration. Please buy the new product"
    Another issue is that I had someone help me set it up when I first started using it. I needed to get it up and running before I actually had the time to read the documentation. Dantz' first manual was probably the most confusing manual I have ever read. (Or as my daughter would say "ever, ever, ever, ever" kind of like the way Taylor Swift sings it). ;-)
    I suppose I may have to start looking for someone on Craigslist who has an old retired copy they would be willing to sell me. Then maybe I could use the version you linked to. All I need is the ability to control the tape. Read/Write/Erase. I will even forgo the index rebuilding feature for when an index get corrupted until I figure out my NAS box.

  • St.conf parameters for SDLT tape drive / Solaris 8

    Hello,
    I need the parameters for the SDLT tape drive from Tandberg for the st kernel driver. In the st.conf there is no entry for Tandberg SDLT.
    With the st.conf, shipped with Solaris 8 10/01, my V880 crashes when accessing the SDLT with the mt command.
    Does anyone here have the parameters?
    Thanks in advance
    Thomas M�ller
    department manager IT
    Christ GmbH
    Germany

    Hi Thomas,
    Actually, a bug 4495684 has been filed to fix this issue. A 2.6, 7,
    8 and SOlaris 9 patch should come out soon that will add this entry
    in the st.conf.
    I constructed this entries from the bug description. Try if it works.
    It should else wait for the patch. Any way, please let me know
    the results.
    "QUANTUM Super DLT", "Quantum Super DLT", "SDLT-data";
    SDLT-data = 1,0x38,0,0x8619,4,0x88,0x89,0x90,0x91,3;
    Good Luck !!!
    Shridhar

  • Overwritten temp folder / drive permissions

    Hello,
    I have this annoying issue with windows 8.1, my temp folder permission is changed periodically (like once a month or so) and I have to change it back manually, but I don't know what and why is doing this.
    And right now this issue is grown, When I'm trying to copy or save a file to my secondary HDD a Windows allert pops up saying something like this: A required privilege is not held by the client (0X80070522)
    Than I looked up the permissions and the Authenticated User was blanked out none of the checkboxes were checked
    The funny thing is that Windows put the boot to that drive and haf of my softwares are also there and still something was able to change permissions (and or Ownership),
    I would think Windows protects the MBR more.
    So, I would like to know how can I resolve this and get my rights back to my HDD and find what is messing with my folder and drive permissions. Oh and is that right that the owner on that drive is TrustedInstaller because on my other drive Administrators
    are the owner?
    And please don't say to delete my user account because I use a lots of software which needs configuration (like IIS, MySQL, etc..) and right now I don't have a day or two to reconfigure everything.

    Hi,
    For this issue,please reset the  security settings on your system from the following article.
    http://support.microsoft.com/kb/313222
    Note:This article is for windows vista and let us test if it works Windows 8.1.
    Just run in a evalated prompt the following command.
    secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose
    If the issue persists,please reset all permissions, run this command:
    icacls * /reset /t /c /q
    Regards,
    Kelvin Xu
    TechNet Community Support

Maybe you are looking for

  • Master/Detail Forms - How to go directly to detail?

    The things you forget when you haven't used them in a while. I have two tables: MASTER with a MASTER_ID DETAIL with a DETAIL_ID and MASTER_ID (foreign key back to master based on MASTER_ID) When I generate the form using the wizard, how do I get the

  • Error while doing portal configuration

    Hi All, After doing all the configuration in portal, while performing the connection checks I am getting http/http(s) related error. Pls help. System Connection Tests SAP Web AS Connection -: SAP Web AS Connection   Test Details: The test consists of

  • Error: failed retrieving file

    everytime I try to download a file from pacman or yaourt, I get this: error: failed retrieving file 'whateverfileimdownloading.tar.gz' from mirrors.gigenet.com : Not Found I'm trying to install mathmap in gimp 2.6, but I this happens and mathmap does

  • How to check if XI installed

    Hi, I know this is a basic question. Our basis guys installed, BI of NW2004s, how to check if they have installed XI. Any links, documents in this direction would help me. Thanks, -Naveen.

  • h:inputHidden

    suppose that i have:   <h:inputHidden id="id" value=#{bean.property}>how could i get the value of the hidden field? Regards, Rafael Roque