Tape drive reconfigure

Hi all,
i am presently running a server that has no video card. No problem to access it because a use rlogin to manage and maintain the server.
Now i need to reconfigure the server to "see" the new tape drive i installed.
One way to reconfigure the server is to use the OK prompt with the STOP-A keys. But that works only locally, not on the remote host.
Is there a way to reconfigure the server by remote access?
Thank you

Thanks for the info. According to the following manual (caution it's a pdf), on pdf pages 31 & 32 of 149 ( manual pages 1-19 & 1-20) it is not hooked up exactly as specified but this shouldn't be a problem.
They have the terminator on the AutoLoader. You have it on the drive.
http://sunsolve.Sun.COM/handbook_pub/Systems/L9/documents/L9_svc.pdf
The question I have is where is it connected to the E250? Did you have an HBA (Host Bus Adapter or SCSI controller) installed to support this L9. Depending on the drive installed in the L9, (DLT8000 vs DLT1) You would need the proper controller installed in one of the PCI slots in the E250. See:
http://sunsolve.Sun.COM/handbook_pub/Systems/L9/components.html
Also, if this is a DLT8000 drive in the L9 then you may want to load the latest st.conf patch to enable DLT8000 support in the /kernel/drv/st.conf file. Just search for st.conf in Free Patch Descriptions in SunSolve. Use the appropriate patch based on the Solaris version you have installed.

Similar Messages

Tape Drive Upgrade

I'm running a SunFire v440 with a IBM 3584 tape library. Solaris 9 is the OS and Veritas NetBackup 5.1 is the App. Currently the IBM 3584 has LTO-2 drives in it and the backup team wants to upgrade to LTO-3 drives. They are planning on using the same WWN's thinking this will make the transition easier. I've never worked with tape drives before and need to know if this is valid.
Also, to get the drives visable to Netbackup does anything have to be done at the OS level? I've reviewed the sg.conf file and don't see anything that stands out but my knowledge of this is limited.
Any help will be greatly appreciated.

Hi,
After changing the drives (if they are fiber native) the WWN�s will change since each fiber device has a unique WWN like a MAC. (remember zoning on the fiber switch also needs to be done to accommodate the new hardware.)
It is best to 1st unconfigure the old devices:
cfgadm �al will display the information you require to see where the drives bind to c(#)
run cfgadm �c unconfigure c(#) to remove the old tape drives from the configuration.
Now run the clean-up devfsadm �C
Replace the drives with the LTO-3 units and zone the switch accordingly unless you use a switch that makes use of VSAN.
Reboot tape library
Run the configuration cfgadm �c configure c(#) you might need to do a force update in some cases: cfgadm �c configure �o force_update c(#)
List the devices cfgadm �al
If all is well up to this point you are set from the OS side.
You will need to reconfigure the storage devices in Netbackup since the serial numbers of the drives are now different.
Make sure you follow the guidelines for adding the correct values for LTO3 to the two files listed below to make sure your drives perform at their peak.
/usr/openv/netbackup/db/config/NUMBER_DATA_BUFFERS
/usr/openv/netbackup/db/config/SIZE_DATA_BUFFERS
Hope this helps.

Solaris FC Tape Drive

Hi Folks,
We have the following scenario:
- SunFire v490 server
- DAT 72 tape, SCSI
- LTO4 tape, FC (via qlogic HBA)
- Solaris 9 + updated patches
We need some help regarding the FC tape configuration. *"cfgadm -al"* shows the FC tape as:
c4::500110a0008a18eb tape connected configured unknownand *"ls -l shows"* :
lrwxrwxrwx 1 root root 68 Jan 31 14:16 /dev/rmt/1 -> ../../devices/pci@8,600000/SUNW,qlc@1/fp@0,0/st@w500110a0008a18eb,0:Wich is the tape's WWN. But when the tape drive status is invoked via "*mt -f /dev/rmt/1 status"* , it shows
/dev/rmt/1: No such device or addressWhat are we missing here?
Any suggestions will be greatly appreciated, thanks in advance,
SEC

Hi,
Thanks for your responses, after installing the suggested patch in single user mode, performing reconfiguration reboot did not help.
The FC HBA is already configured and working, but qhe we try to reconfigure the drive it shows:
root@host1 # cfgadm -c configure c4::500110a0008a18eb
cfgadm: Library error: failed to create device node: 500110a0008a18eb: Invalid argumentAny help will be very appreciated,
SEC

Storagetek LTO3 tape drive cannot detact in solaris 9

Hi, i have a problem regarding the installation of LTO3 tape drive to my SunFire V880.
The scenario is like this. I have 2 SunFire v880 and 1 SunFire 280R. Each of them using external lto3 tape drive. But 2 of them is working fine.Only 1 server has a problem. which is one of the v880.
Below are the patch for my Solaris 9
1. V880 - 118558-24 (tape drive detected)
2. V880 - 112233-11 (tape drive not detected)
3. 280R - 112233-11. (tape drive detected)
What makes me confused is at the tape drive documentation says that the tape drive only can be used for the patch higher than 112233-11 . But i can see that there is no problem with 280R. The scsi card and tape drive is the same model for all three servers.
I have run setevnv auto-boot? false, reset-all ,probe-scsi-all but still cannot run.
When I ls in /dev/rmt..there is no files in it.Can somebody help me..Tq

Hello,
The scsi card and tape drive is the same model for all three servers.
I have run setevnv auto-boot? false, reset-all ,probe-scsi-all but still cannot run.
If the drive isn't displayed by probe-scsi-all, check the cable and terminators.
Even if no SCSI device is detected, the controller itself should be displayed.
Maybe the external port of the controller has failed.
If the drive is displayed advance to the next step.
When I ls in /dev/rmt..there is no files in it.
Did you boot with the reconfiguration option ? Solaris 9 supports devfsadm to rebuild the device-tree without reboot, but if you can afford the downtime, a reboot is prefered.
Without reboot: devfsadm -C -c tape -v
This is a link to an online version of the manpage http://man.cx/devfsadm(1M)
With reboot: Either touch /reconfigure; init 6 or boot -r from the ok-prompt.
A feedback is appreciated (didn't help, component failed, etc.) !
Michael

Error after installing tape drive

Hi,
I am a newbie to Solaris, I have a SunFire V120 box, i was trying to install a tape drive(HP SureStore DAT24), i did the install in this manner.
# rm -rf /etc/path_to_inst
# init 6
later at the "ok" prompt i gave "boot -ar" after doing that it asked me various options i accepted the default values, when it asked for rebuilding the /etc/path_to_inst file i said "y", but later everything went wrong.
This is the output,
Sun Fire V120 (UltraSPARC-IIe 548MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #51581741.
Ethernet address 0:3:ba:13:13:2d, Host ID: 8313132d.
Executing last command: boot -ar
Boot device: /pci@1f,0/pci@1/scsi@8/disk@0,0 File and args: -ar
Enter filename [kernel/sparcv9/unix]:
Enter default directory for modules [/platform/SUNW,UltraAX-i2/kernel /platform/
sun4u/kernel /kernel /usr/kernel]:
Name of system file [etc/system]:
SunOS Release 5.8 Version Generic_108528-15 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
|
The /etc/path_to_inst on your system does not exist or is empty.
Do you want to rebuild this file [n]? y
root filesystem type [ufs]:
Enter physical name of root device
[/pci@1f,0/pci@1/scsi@8/disk@0,0:a]:
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_raid failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
WARNING: forceload of misc/md_stripe failed
WARNING: forceload of misc/md_mirror failed
configuring IPv4 interfaces: eri0.
Hostname: aks
mount: /dev/md/dsk/d1 is not this fstype.
/sbin/rcS: /etc/dfs/sharetab: cannot create
failed to open /etc/coreadm.confsyseventd: Unable to open daemon lock file '/etc
/sysevent/syseventd_lock': 'Read-only file system'Configuring /dev and /devices
devfsadm: mkdir failed for /dev 0x1ed: Read-only file system
devfsadm: open failed for /dev/.devfsadm_dev.lock: Read-only file system
Configuring the /dev directory (compatibility devices)
/etc/rcS.d/S50devfsadm: /tmp/sock2path.57: cannot create
The system is coming up. Please wait.
/sbin/mountall: /tmp/sh800: cannot create
rm: Unable to remove directory /tmp: Read-only file system
mkdir: Failed to make directory "/tmp"; Read-only file system
chown: /tmp: Read-only file system
10/5/2005 9:56:42 GMT LOM time reference
/etc/rc2.d/S69inet: /tmp/ifconfig.100: cannot create
grep: can't open /tmp/ifconfig.100
/etc/rc2.d/S69inet: test: argument expected
starting rpc services: rpcbind done.
Setting netmask of eri0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway aks
syslog service starting.
dumpadm: failed to open /etc/dumpadm.conf: Read-only file system
cron could not unlink FIFO: No such file or directory
cron aborted: cannot create fifo queue
! cannot create fifo queue Wed Oct 5 04:56:45 2005
! ******* CRON ABORTED ******** Wed Oct 5 04:56:45 2005
/dev/bd.off: Read-only file system
/etc/rc2.d/S90solaris: /tmp/fgd.207: cannot create
cat: cannot open /tmp/fgd.207
Error -- cannot open error log /.FGDLog
volume management starting.
/etc/rc3.d/S15nfs.server: /tmp/sharetab.232: cannot create
touch: /tmp/sharetab.232 cannot create
mv: cannot access /tmp/sharetab.232
share_nfs: /home/weblogic/SIMecho/logs: No such file or directory
share_nfs: /local/data2/home/weblogic/SIMecho/out: No such file or directory
chmod: WARNING: can't change /etc/dfs/sharetab
The system is ready.
aks console login:
INIT: Command is respawning too rapidly. Check for possible errors.
id: sc "/usr/lib/saf/sac -t 300"
aks console login: aks console login: root
Password:
/etc/logindevperm: /dev/mouse: Read-only file system
/etc/logindevperm: /dev/kbd: Read-only file system
Last login: Wed Oct 5 04:20:28 on console
Oct 5 04:57:46 aks login: ROOT LOGIN /dev/console
root @ aks::/> vi /etc/system
"/etc/system" [Read only] 109 lines, 2687 characters
After doing some google i found that nothing is wrong i just need to comment some lines in the /etc/system file. But still i wasn't able to bacause the system is mounted in read only mode.
Thanking you in advance.
Regards,
Rajendra Rait.

I have exactly the same problem after running an fsck to clear corrupt files.
Is there a problem with mirrored disks and using boot -ar to rebuild path_to_inst?
The basic problem is that the root filesystem is coming up as read only
i.e.
The /etc/path_to_inst on your system does not exist or is empty.
Do you want to rebuild this file [n]? y
root filesystem type [ufs]:
Enter physical name of root device
[/pci@1f,0/pci@1/scsi@8/disk@0,0:a]: /pci@1f,0/pci@1/scsi@8/disk@1,0:a
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_raid failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
WARNING: forceload of misc/md_stripe failed
WARNING: forceload of misc/md_mirror failed
configuring IPv4 interfaces: eri0 lo0:1.
Hostname: plant
mount: /dev/md/dsk/d0 is not this fstype.
failed to open /etc/coreadm.confsyseventd: Unable to open daemon lock file '/etc/sysevent/syseventd_lock': 'Read-only file system'Configuring /dev and /devices
devfsadm: mkdir failed for /dev 0x1ed: Read-only file system
devfsadm: open failed for /dev/.devfsadm_dev.lock: Read-only file system
Configuring the /dev directory (compatibility devices)
/etc/rcS.d/S50devfsadm: /tmp/sock2path.52: cannot create
The system is coming up. Please wait.
/sbin/mountall: /tmp/sh730: cannot create
Any help would be gratefully received as I want to avoid rebuilding the server from scratch!
Thanks

How can I connect a DLT-IV Tape drive with SCSI interface to Quad G5?

I have had no problems with my "Quantum equivalent La Cie DLT-IV Tape drive" on OSX connected to the G4 Quicksilver using an Adaptec 2930CU PCI card - but I can't move that to the G5 as it has to be PCI-Express cards as far as I can tell.
Adaptec pre-sales support inform me that Adaptec have no Mac support in their current product range.
Has anyone found a solution to this connection requirement that will work with Retrospect and DVD StudioPro?
If there is a workable solution which is no longer available to buy - I would still be interested in knowing so I could scour ebay for it.
TIA,
Richard

Hi Richard;
If you go to ATTO, they are offering a ExpressPCI PSC which include a SCSI bus on sale for $24.11.
Allan

How to Add a New Tape Drive to Solaris 10

Hi,
I have an old DLT4000 tape drive attached to my SunFire V250. As I am starting to fill up the 40GB on that tape drive I have purchased a new SDLT320 and want to replace it with the old DLT4000.
I have set the SCSI ID on the back of the unit to the same number as the DLT4000 (3), powered off the old unit, unplugged it, then plugged in the new SDLT320 and turned it on.
I cannot seem to read the tape (mt -f /dev/rmt/0 status) - it says it is offline.
I thought I could simply swap the unit but obviously that is not the case. How do I add it properly?
Any help would be appreciated.
Rob

Thanks, I tried that and no go.
I noticed the driver did load reload so I did a modload -p st and it re-loaded but I still cannot get the tape to read. It says that /dev/rmt/0 does not exsist.
What about if I do a reboot?
What commands can I use there?
Bear inmind I have rebooted twice, once with an init 6, the other, an init 0 and then a boot -rs.
Any other ideas?

-36 errors, can't copy files in finder or backup to tape drive

Does anyone know what causes -36 errors and how we can eliminate them? We need to backup our files, but have been unable to do so due to -36 I/O errors in Retrospect. Files on which this error is reported by Retrospect will not copy in the finder, either. I think our hard drive may be bad. How can we recover our files if they cannot be backed-up or copied?
We recently purchased a tape drive for backup, an Exabyte VXA-2 FireWire Tape Drive. We are using VXA-2 V23 (230m) 80GB/160/GB Data Cartridges. I have verified that this drive is supported by Retrospect and that we have the correct tape cartridge. We are backing up one partition of a hard drive that is divided into two partitions. One is the start-up partition, the other is a partition on which we store customer files. We are backing up the partition that stores customer files. The tape drive is attached to and backing up a Macintosh G3 that was recently upgraded from system 9 to OS X 10.3.9 (Panther). The hard drive was not re-formatted before OS X was installed. I have downloaded updates and updated our Retrospect to the latest Retrospect version 6.1.126. I keep getting read errors when trying to backup the customer files partition, although I have ran every good repair program I know of to that partition — TechTool, Disk Warrior and Disk Utility. The tests all say the drive is OK. The only test I have not done recently is a surface scan, as this is an over-night procedure, but plan to do it this evening. A surface scan was done at the beginning of January, but we have continued to have problems. Yesterday morning I ran Disk Utility and it verified that the partition was okay.
I am fairly certain the problem is not with the tape drive, as a test backup up of some of the problem customer files to a file backup on the startup drive also produced many -36 errors. Also the tape drive worked on another Mac with no -36 errors.
The following is an excerpt from the log of last night's backup when the program was backing up (this is a very small portion of the whole log, there was a very long list of files it reported read errors on) Following this excerpt is also an excerpt of errors reported while the program was trying to verify the backup:
∆ Retrospect version 6.1.126
automatically launched at 2/20/2006 7:00 PM
+ Retrospect Driver Update, version 6.1.3.101
+ Normal backup using Files Volume M,W,F BU at 2/20/2006 7:00 PM
To backup set Files Volume M,W,F Set…
- 2/20/2006 7:00:20 PM: Copying Files Volume…
Can't read file “•T+•Files Volume”, error -36 (i/o error, bad media?), path: “Files Volume/•T+•Files Volume”.
Can't read file “•T+•Files Volume(1)”, error -36 (i/o error, bad media?), path: “Files Volume/•T+•Files Volume(1)”.
Can't read file “•T+•Files Volume(2)”, error -36 (i/o error, bad media?), path: “Files Volume/•T+•Files Volume(2)”.
Can't read file “BALANCE PLUS AGREEMENT2.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/BALANCE PLUS AGREEMENT2.p65”.
Can't read file “Balance Plus Agreements”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/Balance Plus Agreements”.
Can't read file “BALANCE PLUS.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/BALANCE PLUS.p65”.
Can't read file “2000/#2(U)”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/cdcguide/2000/#2(U)”.
Can't read file “New Accounts-CSB Final.PMD”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/New Accounts Brochures 10-05/New Accounts-CSB Final.PMD”.
Can't read file “Pacesetter Ad.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Pacesetter Bank/Pacesetter Hometown Financing/Pacesetter Ad.tiff”.
Can't read file “SUMMERTIME.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Summertime/SUMMERTIME.p65”.
Can't read file “RiverFest Comcast1.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/Adelphia/Comcast Logos & Art/RiverFest Comcast1.EPS”.
Can't read file “CHS logo converted to Photoshop”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/CHS Logo-Various forms/CHS logo converted to Photoshop”.
Can't read file “CHS logo adjusted/Photoshop.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/CHS Logo-Various forms/Adjusted by Karen/CHS logo adjusted/Photoshop.eps”.
Can't read file “FWOLO~13.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/FWO logos/FWO Logos Various Formats/EPS/FWOLO~13.EPS”.
Can't read file “wellnotype.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/well logo for MGH/wellnotype.bmp”.
Can't read file “spencer logo bw.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/spencer logo bw.eps”.
Can't read file “spencer logo.TIF”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/spencer logo.TIF”.
Can't read file “DOLCO 900 Master BC 10up old”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-Misc/Dolco Packaging (Bill Cooke)/DOLCO Business Cards/DOLCO BCs/Dolco BCs 10up/DOLCO 900 Master BC 10up old”.
Can't read file “accutech logo color sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Accutech Systems/accutech logo color sep.eps”.
Can't read file “Kerr 1 backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 1 backer.eps”.
Can't read file “LNT price labels.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Jar Toppers / Gift Promo/email to discount labels/LNT price labels.eps”.
Can't read file “A-09.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/A-09.DOT”.
Can't read file “A-14.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/A-14.DOT”.
Can't read file “B-21.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/B-21.DOT”.
Can't read file “B-35.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/B-35.DOT”.
Can't read file “Visor Install fix.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Booklets/Visor Installation Booklet/Visor Install fix.doc”.
Can't read file “Visor Program (SD- 1030) B.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Booklets/Visor Programming Booklet/Visor Program (SD- 1030) B.doc”.
Can't read file “BlueConnect_16pgInstall.qxp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/BlueConnect_16pgInstall.qxp”.
Can't read file “BlueConnect_28pgUserREV.qxp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/BlueConnect_28pgUserREV.qxp”.
Can't read file “BlueConnect Installation Instructions 2.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BlueConnect Installation Instructions 2.doc”.
Can't read file “BlueConnect Installation Instructions rev 10-07-05.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BlueConnect Installation Instructions rev 10-07-05.doc”.
Can't read file “BlueConnectInstall16pg.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BlueConnectInstall16pg.doc”.
Can't read file “CONSUMER USERS MANUA1.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/CONSUMER USERS MANUA1.doc”.
Can't read file “BlueConnect Reg Card.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Registration Cards/BC 203 BlueConnect Reg/BlueConnect Reg Card.doc”.
Can't read file “Living Will insert p1.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Cresthaven Living Will Insert 1/06/Living Will insert p1.eps”.
Can't read file “Living Will insert p2.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Cresthaven Living Will Insert 1/06/Living Will insert p2.eps”.
Can't read file “Elm Ridge 4-c vets Page_1.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Elm Ridge Valor Hill/Elm Ridge 4-c vets Page_1.tiff”.
Can't read file “Elm Ridge 4-c vets Page_2.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Elm Ridge Valor Hill/Elm Ridge 4-c vets Page_2.tiff”.
Can't read file “Reply card APv.1 (Vets).eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Mailers & Promo/Acacia / Rose Hills mailers/PDFs Converted to art/Reply card APv.1 (Vets).eps”.
Can't read file “FinancialPolicyBroch.pub”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/FinancialPolicyBroch.pub”.
Can't read file “CIO logo color sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/Bus Cards / Appt Cards/CIO Logos/Art/CIO logo color sep.eps”.
Can't read file “FCC Letterhead Indiana.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/FCC (formerly Jaytec)/Letterheads/Envelopes/Memo/FCC Letterhead Indiana.bmp”.
Can't read file “habitat envelope.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Habitat for Humanity/habitat envelope.p65”.
Can't read file “Page 2.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/In Touch Dining (Table Talk)/Platter Chatter - Don Halls/Fix in Quark then print to EPS/Page 2.eps”.
Can't read file “brochure”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/My Hair Broker/brochure”.
Can't read file “brochure-1”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/My Hair Broker/brochure-1”.
Can't read file “brochure”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/My Hair Broker/My Hair Broker recovered files/brochure”.
Can't read file “GIFTBOX.epsbitmap”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/CHARLES/MISC FILES/GIFTBOX.epsbitmap”.
Can't read file “ASC LetterHeadFinal.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Accutech/original art (emailed)/ASC LetterHeadFinal.EPS”.
Can't read file “TSC 104 and 111.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/Fixed Files/TSC 104 and 111.pdf”.
Can't read file “TSC 116 Initial Note.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/Fixed Files/TSC 116 Initial Note.pdf”.
Can't read file “sptslogo screen sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Sports Physical Therapy (SPTS)/logos & art/sptslogo screen sep.eps”.
Can't read file “sptslogo spot sep cool gray.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Sports Physical Therapy (SPTS)/logos & art/sptslogo spot sep cool gray.eps”.
Can't read file “A Stout BCs 12 up all names”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 12 up all names”.
Can't read file “bifold on grstrosprep2.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/03DET0609 (CGIC Prep 4)/bifold on grstrosprep2.qxd”.
Can't read file “MAP_DUO.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/04DET0076 (CGIC Prep 1)/Pictures/MAP_DUO.tif”.
Can't read file “bifold on grstrosprep2.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/03DET0609 (CGIC Prep 4)/bifold on grstrosprep2.qxd”.
Can't read file “Beth Business Card.2”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/Beth Business Card.2”.
Can't read file “frankfort map gray.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/frankfort map gray.tif”.
Can't read file “lafayette map.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/lafayette map.tif”.
Can't read file “white county gray.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/white county gray.tif”.
Can't read file “Hoosier Lottery HL-ARC.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Hoosier Lottery/Age Restriction Cards 2005/Hoosier Lottery HL-ARC.pmd”.
Can't read file “HCI_card2.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Hunter Construction Inc./HCI_card2.tiff”.
Can't read file “IOH 016 steroid epideral inject”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/IOH - Indy Ortho Hospital/IOH 016 steroid epideral inject”.
Can't read file “IOHLOGO.TIF”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/IOH - Indy Ortho Hospital/Indiana Ortho Hospital logos/logo file from customer/IOHLOGO.TIF”.
Can't read file “OIFI 610 Reg Env Fishers.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/Envelopes/OIFI 610 Reg Env Fishers.pmd”.
Can't read file “ORTHO 542 Memo master stock 9up”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/ORTHO forms/ORTHO 542 Memo master stock 9up”.
Can't read file “Ortho 542 memo NEW master.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/ORTHO forms/Ortho 542 memo NEW master.pmd”.
Can't read file “SESC 042 Local Discharge.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/SESC Southeast Surgery Center/SESC 042 Local Discharge.pmd”.
Can't read file “Richmond Baking from scan.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Richmond Baking/Richmond Baking from scan.eps”.
Can't read file “RPL 300C 4-02.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Richmond Power & Light/RPL 300C 4-02.p65”.
Can't read file “RPL lighter.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Richmond Power & Light/RPL lighter.pmd”.
Can't read file “Burlington BLUE.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Unified Group Services/Burlington Motor Carriers/Burlington BLUE.eps”.
Can't read file “Burlington RED.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Unified Group Services/Burlington Motor Carriers/Burlington RED.eps”.
Can't read file “WW-SUMMER EVENT Postcard.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Wilson Wines/WW-SUMMER EVENT Postcard.p65”.
Can't read file “OSBORNS.TIF”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Debbie/Albany EMS/AEMS spaghetti poster/OSBORNS.TIF”.
Can't read file “BCH 7019 Physicians Orders”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Debbie/Blackford Community Hospital/BCH forms/BCH 7019 Physicians Orders”.
Can't read file “BCH 7066 Outcomes Walk Test”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Debbie/Blackford Community Hospital/BCH forms/BCH 7066 Outcomes Walk Test”.
EXCERPT FROM LOG WHEN TRYING TO VERIFY BACKUP:
2/20/2006 10:51:12 PM: Comparing Files Volume…
Can't read file “CS Booklet Acknow Form.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/AAAA/CS Booklet Acknow Form.pmd”.
File “BV Layout First Quarter.pmd”: miscompare at data offset 221,055, path: “Files Volume/Customer files/Bill Morris/BV Layout First Quarter.pmd”.
Can't read file “E FUNDS TRANSFER AGREE.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/E FUNDS TRANSFER AGREE.doc”.
Can't read file “BALANCE PLUS AGREEMENT2”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/BALANCE PLUS AGREEMENT2”.
Can't read file “Blackford Golf Club.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Blackford Golf Club/Blackford Golf Club.p65”.
Can't read file “INVESTMENT BROCHURE 7-04.PMD”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Investment Brochure/INVESTMENT BROCHURE 7-04.PMD”.
Can't read file “Pacesetter Stmt-Hartford 04 old”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Pacesetter Bank/Hartford City/Pacesetter Stmt-Hartford 04 old”.
Can't read file “TELEBANKING.P65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Pacesetter Tele-Banking/TELEBANKING.P65”.
Can't read file “ *chs FHC logos (USE ME)”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/CHS Logo-Various forms/ *chs FHC logos (USE ME)”.
Can't read file “FWOLOG~D.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/FWO logos/FWO Logos Various Formats/EPS/FWOLOG~D.EPS”.
Can't read file “FWOLO~18.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/FWO logos/FWO Logos Various Formats/EPS/FWOLO~18.EPS”.
Can't read file “Jiont Replacement Logo.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/logos/Jiont Replacement Logo.bmp”.
File “SV Name 1 line 8x40p.tif”: miscompare at data offset 994,239, path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/St. Vincent Scans/Logos/SV Name 1 line 8x40p.tif”.
Can't read file “SV-birds to side, no addr.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/St. Vincent Scans/Logos/SV-birds to side, no addr.tiff”.
Can't read file “Spencer logo bw.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/Spencer logo bw.bmp”.
Can't read file “spencer printing”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/spencer printing”.
File “Appt Cards No Logo 10-up”: miscompare at data offset 94,208, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/Appointment Cards/Appt Cards No Logo 10-up”.
File “BMA 202,BMA 2114 10up Musselman”: miscompare at data offset 52,622, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/Appointment Cards/BMA 202,BMA 2114 10up Musselman”.
File “BMA Non-Security RX Pads”: miscompare at data offset 81,922, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Horiz/BMA Non-Security RX Pads”.
File “BMA 2150 White Script-Singleton”: miscompare at data offset 606,218, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Verticl/BMA 2150 White Script-Singleton”.
File “BMA 2170 White Script-C Frazier”: miscompare at data offset 512,002, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Verticl/BMA 2170 White Script-C Frazier”.
File “BMA 2186 White Script-Laur”: miscompare at data offset 577,586, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Verticl/BMA 2186 White Script-Laur”.
Can't read file “DOLCO BC Ramos/Hernandez”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-Misc/Dolco Packaging (Bill Cooke)/DOLCO Business Cards/DOLCO BCs/Dolco BCs 10up/DOLCO BC Ramos/Hernandez”.
Can't read file “accutech ACT 201 Letterhead”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Accutech Systems/accutech ACT 201 Letterhead”.
Can't read file “Allied rent no more Postcard”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Allied Home Mortgage/Rent No More postcard/Allied rent no more Postcard”.
Can't read file “coupon grouping copy.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Alltrista 3 Fair Coupon/Fair coupon/Art/coupon grouping copy.eps”.
Can't read file “Kerr 1.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 1.eps”.
Can't read file “Kerr 3 backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 3 backer.eps”.
Can't read file “Kerr 3.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 3.eps”.
Can't read file “Kerr 5 backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5 backer.eps”.
Can't read file “Kerr 5 blue backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5 blue backer.eps”.
Can't read file “Kerr 5 blue.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5 blue.eps”.
Can't read file “Kerr 5.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5.eps”.
Can't read file “JAR 402 P&C Env. Corporate”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Letterheads & Envelopes/Envelopes/JAR 402 P&C Env. Corporate”.
Can't read file “Elite Presentation Cover”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Misc/Elite Presentation Cover”.
File “Consumer DCRA (3)”: miscompare at data offset 13,874, path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/JARDEN Benefit Choices/Consumer Manufacturing Cloquet/(we don't print these sections)/Consumer DCRA (3)”.
Can't read file “A-06.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/A-06.DOT”.
Can't read file “Visor Program fix.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Booklets/Visor Programming Booklet/Visor Program fix.doc”.
Can't read file “BC User Manual rev 10-07-05.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BC User Manual rev 10-07-05.doc”.
Can't read file “BC User Manual rev 10-24-05.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BC User Manual rev 10-24-05.doc”.
Can't read file “Homelink WARRANTY.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Registration Cards/BC 202 Home Link Reg/Homelink WARRANTY.doc”.
Can't read file “Open House Card 2 up back”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bill Frazier Mobile Homes/Open House Card 2 up back”.
Can't read file “Elite's presort permit 228.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Mailers & Promo/Elite's presort permit 228.p65”.
File “GAM 100 Gyn Assoc Chg Slip”: miscompare at data offset 30,334, path: “Files Volume/Customer files/Elite/Brad/CHARGE SLIPS/GAM 100 Gyn Assoc Chg Slip”.
Can't read file “CIO BC Amy Myers Train.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/Bus Cards / Appt Cards/Individuals' BCs/CIO BC Amy Myers Train.pmd”.
Can't read file “CIO 281 Medical Release Form”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/CIO Forms/CIO 281 Medical Release Form”.
Can't read file “CIO 106 P & OT newest.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/CIO Forms/CIO 106/CIO 106 P & OT newest.pdf”.
Can't read file “CIO COLOR TABS 3 BANK”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/Misc/CIO COLOR TABS/CIO COLOR TABS 3 BANK”.
Can't read file “Cisco multi-ch 2-color.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Comcast/Flyers/Digital / Internet Flyers/6x9 69.95 Limited-time offer/Cisco multi-ch 2-color.eps”.
Can't read file “Z4935.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Comcast/Race for Cure ad/Z4935.eps”.
File “Comcast Rates Multi 6up”: miscompare at data offset 2,510,558, path: “Files Volume/Customer files/Elite/Brad/Comcast/Rate Cards & Channel Line-ups/ Comcast Rates & Lineups 2006/ trash before next run/Comcast Rates Multi 6up”.
Can't read file “Comcast Samples Digi Channels-5”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Comcast/Rate Cards & Channel Line-ups/ Comcast Rates & Lineups 2006/ trash before next run/Comcast Samples Digi Channels-5”.
Can't read file “FCC Bus Card logo.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/FCC (formerly Jaytec)/Business Cards/FCC Bus Card logo.bmp”.
File “FGC 200 PRAYER CHAIN”: miscompare at data offset 110,530, path: “Files Volume/Customer files/Elite/Brad/Four Square Church/FGC 200 PRAYER CHAIN”.
Can't read file “Icon◊”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/In Touch Dining (Table Talk)/Icon◊”.
Can't read file “Customer Service Record partial”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Marcum Racing/Customer Service Record partial”.
Can't read file “PE 400 #10 Window Envelope”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Peerless Electric/PE 400 #10 Window Envelope”.
Can't read file “spartech.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Spartech/spartech logos/spartech.doc”.
Can't read file “neb_Logo.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Northeast Bank/neb_Logo.bmp”.
Can't read file “logo1web.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/logo1web.tif”.
Can't read file “TSC 200 RX Pad”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/Fixed Files/TSC 200 RX Pad”.
Can't read file “TSC 104 and 111.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms 2/04/TSC 104 and 111.pdf”.
Can't read file “TSC 105 General Progress.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms 2/04/TSC 105 General Progress.pdf”.
Can't read file “sptslogo spot sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Sports Physical Therapy (SPTS)/logos & art/sptslogo spot sep.eps”.
Can't read file “A Stout BCs 10 up all names”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 10 up all names”.
Can't read file “A Stout BCs 12 up Sales”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 12 up Sales”.
Can't read file “A Stout BCs 12 up template”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 12 up template”.
Can't read file “AERCO Bryant 8-09-05.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/AERCO/AHC Bryant New Equip Line/AERCO Bryant 8-09-05.pmd”.
Can't read file “6HR_DRINK.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/03DET0609 (CGIC Prep 4)/Pictures/6HR_DRINK.tif”.
Can't read file “reprint-colonos prep2 fix.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/04DET0076 (CGIC Prep 1)/reprint-colonos prep2 fix.qxd”.
Can't read file “6HR_DRINK.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/03DET0609 (CGIC Prep 4)/Pictures/6HR_DRINK.tif”.
Can't read file “6HR_FOOD.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/03DET0609 (CGIC Prep 4)/Pictures/6HR_FOOD.tif”.
Can't read file “reprint-colonos prep2 fix.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/04DET0076 (CGIC Prep 1)/reprint-colonos prep2 fix.qxd”.
Can't read file “MAP_DUO.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/04DET0076 (CGIC Prep 1)/Pictures/MAP_DUO.tif”.
Can't read file “Beth Business Card.1”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/Beth Business Card.1”.
Can't read file “Lafayette_Logo.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/Lafayette_Logo.tif”.
Can't read file “ECG 302 (partial)”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/ECG Forms/ECG 302 (partial)”.
Can't read file “ECG 532 Surgery Chart Bond LH”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/ECG Forms/ECG 532 Surgery Chart Bond LH”.
Can't read file “carrick.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Memo Pads/ECG 506 From Desk Of/carrick.eps”.
Can't read file “ECG 506 note pad Steph Carrick”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Memo Pads/ECG 506 From Desk Of/ECG 506 note pad Steph Carrick”.
Can't read file “Confetti Canopy3.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Refer A Friend LVC Card/Confetti Canopy3.tif”.
Can't read file “ECG RX 03 B Cyclogel/Isopto”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 03 B Cyclogel/Isopto”.
Can't read file “ECG RX 03 Cyclogel/Homatropine”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 03 Cyclogel/Homatropine”.
Can't read file “ECG RX 13 Eye Center Group Sec.”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 13 Eye Center Group Sec.”.
Can't read file “ECG RX-17 Ocuflox 11/02”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 17/ECG RX-17 Ocuflox 11/02”.
Can't read file “Hoosier Lottery HL-ARC 8up.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Hoosier Lottery/Age Restriction Cards 2005/Hoosier Lottery HL-ARC 8up.pmd”.
Can't read file “oibcards3.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/IOH - Indy Ortho Hospital/Indiana Ortho Hospital logos/oibcards3.eps”.
File “calendarVickersFinal.p65”: miscompare at data offset 2,002,278, path: “Files Volume/Customer files/Elite/Dave/Neff Engineering/Neff Engineering Other/calendarVickersFinal.p65”.
File “Norfleet BC Jason 10up”: miscompare at data offset 1,760,878, path: “Files Volume/Customer files/Elite/Dave/norfleet BC/Norfleet BC Jason 10up”.
File “BCs-New-PM6.5”: miscompare at data offset 2,111,727, path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/Business Cards/BCs-New-PM6.5”.
Can't read file “OIK Miller Only”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/Business Cards/BCs-all old ones/OIK/OIK Miller Only”.
The only suggestion I have come across is to copy the files to another drive, but this is impossible because the problem files cannot be copied. If anyone has any other suggestion for fixing this, I would appreciate any input. Thanks.
Mac G3 Blue & White 300 mhz Mac OS X (10.3.9) Original hard drive replaced with a 120 GB Maxtor 6Y120P0

Tech Tool, Disk Warrior, and Disk Utility all work to make sure the directory is Okay. They do not read every block.
I think you should do the surface scan you spoke of. What program do you use for this?
If you cannot copy a file in the Finder without an I/O error, the file is damaged or the drive had bad blocks.
Be sure you also downloaded the drivers module when you updated retrospect.

Eliant 820 tape drive

I'm Currently running solaris 9 and trying to hook up a
Eliant 820 tape drive. how do I modify the st.conf. is it
one line at a time ?. also is there a way to upgrade the firmware/ patches from solaris/sun?. all I get is I/O errors
everytime I run sunvts. I ran cleaning tapes/ new tapes
through about 3 times. I read something about
modyfying the st.conf.
I have no problems with the exabyte 8505 tape drives
just the eliant 820's.

Hi Ketan,
>> unable to initialize ASPI manager
Check SCSI id on your tape device. Try to use different SCSI number or try install correct device driver of the tape device.
Best regards,
Orkun Gedik

Backup on tape drive

hi
i wana backup on tape drive. is there any need for thrid party Media managment softwares.? If yes then which software can I use (Please all tell me the software version and release number). I am using windows platform and Oracle 10 g v2
Thanks

You review the following link;
Media Management Software
http://download.oracle.com/docs/cd/B19306_01/readmes.102/b14233/toc.htm#CHDFBBED
Media Management
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmarchi004.htm#i1007245
Configuring RMAN to Make Backups to a Media Manager
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmconfg002.htm#sthref499
Adith

Tape drive selection for SAP r/3 Landscape

Dear frinds,
We are presently in the process of selection of Tape drive for our sap r/3 landscape. I.e, in the process of sap sizing.
My backup requirements are upto 1 TB. We have development QA and PRD servers in our landscape. We are planning for SAN based storage solution.
What I would like to know are as follows...
1. We are planning for SAN Based Tepe library.
With SAN Based tape library is it manditory to use Backup manager to initiate backup and restore operations.
My question is b'cos i need to upgrade skillset
Is it possible to mount the Single SAN Based Tape drive on my Development, QA and PRD as if they appear as local drives (file system )on the servers. If this is not possible i need to know about the tape drive which can be mounted as local tape drive.
I want only one tape drive in my landscap and I must be able to use sap r/3 tools to backup and restore.
Keeping presice my expectation what i want to know is : I want to conduct backup and restore operations in my SAP r/3 landscape with single tape drive and using SAP BRtools only( i.e. using DB13/ BRtools from command mode ).
It would be great suggested and participated in discussion.
Thanks and Regards,
Sree Ramam SNV

Hi Nirav,
the maintenace cost will be the same as before.
the maintanance cost include the possibility
that if you pay the maintenace fee regularly you can always get the
newest software releadse and the support packages and kernel for it.
please also look at this link.
http://service.sap.com/maintenance
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

Anyone aware of a tape drive solution for the iMac?

I have transitioned to an all digital video workflow and use an Intel based iMac as my editing system. Since I no longer use the mini-dv tapes, I need to find a reliable storage solution to archive my original footage. I believe LTO tapes to be my best bet. I'm having trouble finding an external tape drive to work with my iMac because I don't have a SCSI interface on my iMac or can't locate a tape drive with a Firewire or Thunderbolt interface. Any suggestions?

In the past I used Roxio Easy VHS to DVD for Mac - VHS to DVD Conversion Mac Software, but that was back in Leopard/Snow Leopard and I don't see support for Lion.
Another thing that also worked well for getting those old mini vhs tapes into the iMac. Was to connect either the tape camcorder or the video tape in a mini tape adapter up to a standard DVD recorder and burn a DVD that could be imported into iMovie or your video software.

Tape Drives set automatically to 1

Hi all,
After I set some configuration in the "Backup Settings", I found that "Tape Drives" filed is automatically filled with the value: "1". I tested the issue on may machines and the result was the same.
Steps to generate the issue:
1. Login to the Database Control EM as SYS
2. Follow the following links:
Maintenace Tab -> Backup Settings -> Backup Set
3. Set "Maximum Backup Piece (File) Size" to 4 GB
4. Click on "Policy" link
5. Mark the checkbox "Automatically Backup Controlfile ..."
6. Set "Retain backups that are necessary for a recovery .." to 2 Days
7. Click on "OK" button
Now the settings should be saved. Click again on "Backup Settings", you will see that "Tape Drives" field is filled with "1". By the way, NO tape is installed on the machine.
This leads me to many problems. For example, trying to recover a tablespace failed because RMAN is creating channel of Tape type (although I sat Disk as the default channel)
I hope to see any help on this issue here because it caused me many problems.
Thanks in advance.
Oracle 10g R2 on Windows XP SP2.

This is bug 4338664 "EM DBCONSOLE DEFAULTS TO SBT_TAPE REGARDLESS OF RMAN SETTINGS"
Open a RMAN command session and remove the tape setting:
<RMAN Configure CHANNEL device type 'SBT_TAPE' clear;
Werner

Configure tape drive.

Hi,
What are the steps required for the database backups to be taken on tape drives ? Is rman sufficient for that?
thanks..

yes,legato is third party software.
it includes a Media Management Library (MML).
and to utilize tape storage for your database backups, RMAN requires a media manager. A media manager is a utility that loads, labels, and unloads sequential media such as tape drives for the purpose of backing up and recovering data.
Thanks
Kuljeet Pal Singh

Queries on tape drive configuration

Dear All,
I have some queries on tape drive configuration We are on windows 2003 , oracle 10g and ecc6 .
My requirements is to take backup on tape drive through brtools db13
Do that what need to be done at hardware and sap level means what tape device are there in market which support sap without buying any sap license
Please suggest in detail.
Regards,
Kumar

Hi,
If you are using only Tape device which is directly attached to your server locally, you won't need any license for that..
But if you are going to use any third party backup solution like "TIVOLI", then you may need purchase software and license if any..
Its depend on the software and the vendor...
Next thing, if your Tape device is locally attached to the server, you just need to install and configure device driver, so that your server operating system can recognized that hardware.
Then, you need to change the below parameters in "initSID.sap" profile which is under $ORACLE_HOME\dbs directory to take backup on tape.
backup_type = offline/online
backup_dev_type = tape
compress = hardware
archive_function = save_delete
rewind = "mt -f $ rewind"
rewind_offline = "mt -f $ offline"
tape_pos_cmd = "mt -f $ fsf $"
tape_size = 3600M (as per your tape size)
tape_address = /dev/nmt0
tape_address_rew = /dev/mt0
Leave the rest of the parameters as default.
You will be able to take backup using DB13 on tape.
Regards.
Rajesh Narkhede

Tape drive reconfigure

Similar Messages

Maybe you are looking for