Tape driver problem.
Hi Guys/Girls,
we bought this tape drive, to install it on a OES netware server, but i can't find the driver for this tape device. I called dell but they could'nt help me out, the next number will be 911...
Could somebody please help me out?
This the device,
PV110T LTO-4 Half Height 800GB Internal SAS5 also knows as the IBM Ultrium-HH4
Vega.
Hi,
Vega24 wrote:
>
> Hi Guys/Girls,
>
> we bought this tape drive, to install it on a OES netware server, but i
> can't find the driver for this tape device.
If and what driver you need depends entirely on your backup application.
In general, you don't need any.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de
Similar Messages
-
External tape drive DAT 72 problem
Hi all,
I have solaris 10 sparc running and working very well
but i have problem with external SCSI tape drive DAT 72 problem
it seems to me the tape drive is manufactured by SUN microsystems
when i ran ls -l /dev/rmt/0
it reveals the following output
bash-3.00# mt -f /dev/rmt/0 status
/dev/rmt/0: No such file or directorywhen i ran ls -l
it reveals the following output
ls -l /dev/rmt/0
lrwxrwxrwx 1 root root 43 Sep 20 2006 /dev/rmt/0 -> ../../devices/pci@8,600000/scsi@1,1/st@3,0:it seems to me everything is okay
SCSI cable is connected properly to Tape device and to server as well
the tape has SCSI termination dongle as well and connected properly to Tape device as well
any ideas would be a great assist
Thanks in advance
Edit/Delete Messagefirst of all thanks for your reply
it's not newly installed and i'm not sure if it was working or not because i'm successor for an administrator who left job to new
by the way i rebooted to OBP multiple in hope that Solaris search for new peripherals and configure the one's it recognises.
times with no luck
anyways i ran prtconf bash-3.00# prtconf
System Configuration: Sun Microsystems sun4u
Memory size: 8192 Megabytes
System Peripherals (Software Nodes):
SUNW,Sun-Fire-280R
scsi_vhci, instance #0
packages (driver not attached)
SUNW,builtin-drivers (driver not attached)
deblocker (driver not attached)
disk-label (driver not attached)
terminal-emulator (driver not attached)
SUNW,debug (driver not attached)
dropins (driver not attached)
kbd-translator (driver not attached)
obp-tftp (driver not attached)
SUNW,i2c-ram-device (driver not attached)
SUNW,fru-device (driver not attached)
ufs-file-system (driver not attached)
hsfs-file-system (driver not attached)
chosen (driver not attached)
openprom (driver not attached)
client-services (driver not attached)
options, instance #0
aliases (driver not attached)
memory (driver not attached)
virtual-memory (driver not attached)
SUNW,UltraSPARC-III+ (driver not attached)
memory-controller, instance #0
SUNW,UltraSPARC-III+ (driver not attached)
memory-controller, instance #1
pci, instance #0
ebus, instance #0
flashprom (driver not attached)
i2c, instance #0
nvram, instance #0
idprom (driver not attached)
dimm-fru, instance #1
dimm-fru, instance #2
dimm-fru, instance #3
dimm-fru, instance #4
dimm-fru, instance #5
dimm-fru, instance #6
dimm-fru, instance #7
dimm-fru, instance #8
bbc (driver not attached)
power (driver not attached)
i2c, instance #1
cpu-fru, instance #9
temperature, instance #0
cpu-fru, instance #10
temperature, instance #1
fan-control, instance #0
motherboard-fru, instance #11
ioexp, instance #0
ioexp, instance #1
ioexp, instance #2
fcal-backplane, instance #12
remote-system-console, instance #13
power-distribution-board, instance #14
power-supply, instance #15
power-supply, instance #16
rscrtc (driver not attached)
beep, instance #0
rtc, instance #0
gpio, instance #0
pmc, instance #0
parallel, instance #0
rsc-control, instance #0
rsc-console, instance #1
serial, instance #0
network, instance #0
usb, instance #0
mouse, instance #3
keyboard, instance #2
scsi, instance #0
disk (driver not attached)
tape (driver not attached)
sd, instance #6
scsi, instance #1
disk (driver not attached)
tape (driver not attached)
SUNW,XVR-100, instance #0
pci, instance #1
SUNW,qlc, instance #0
fp (driver not attached)
disk (driver not attached)
fp, instance #1
ssd, instance #1
ssd, instance #0
scsi, instance #2
disk (driver not attached)
tape (driver not attached)
st, instance #18
scsi, instance #3
disk (driver not attached)
tape (driver not attached)
sd, instance #1 (driver not attached)
sd, instance #2 (driver not attached)
sd, instance #3 (driver not attached)
sd, instance #4 (driver not attached)
sd, instance #5 (driver not attached)
sd, instance #7 (driver not attached)
sd, instance #8 (driver not attached)
sd, instance #9 (driver not attached)
sd, instance #10 (driver not attached)
sd, instance #11 (driver not attached)
sd, instance #12 (driver not attached)
sd, instance #13 (driver not attached)
sd, instance #14 (driver not attached)
sd, instance #15 (driver not attached)
sd, instance #16 (driver not attached)
st, instance #0 (driver not attached)
st, instance #1 (driver not attached)
st, instance #2 (driver not attached)
st, instance #3 (driver not attached)
st, instance #4 (driver not attached)
st, instance #5 (driver not attached)
ses, instance #0 (driver not attached)
ses, instance #1 (driver not attached)
ses, instance #2 (driver not attached)
ses, instance #3 (driver not attached)
ses, instance #4 (driver not attached)
ses, instance #5 (driver not attached)
ses, instance #6 (driver not attached)
ses, instance #7 (driver not attached)
ses, instance #8 (driver not attached)
ses, instance #9 (driver not attached)
ses, instance #10 (driver not attached)
ses, instance #11 (driver not attached)
ses, instance #12 (driver not attached)
ses, instance #13 (driver not attached)
ses, instance #14 (driver not attached)
ses, instance #15 (driver not attached)
ramdisk-root, instance #0
os-io (driver not attached)
iscsi, instance #0
pseudo, instance #0
bash-3.00#any further idea -
L180 & LTO3 tape drive communication problem
Hello
We have tape library L180 with 3 lto2 tape drives connected through the lto2-001 adapters.
And now we trying to install lto3 tape drives connected through the lto3-001 respectivly, as it supposed to be compatible with this library.
But library woun't communicate with this new drives showing state "Not Communicating" on the web interface.
Does anyone have any idea what is causing the problem?
Here is the part of library report
------- GENERAL INFORMATION -------
Library Name : 172.29.1.21
Library Location :
Product ID : L180
Library Serial Number : NOT SET
Hardware Version : MPCL 51001316
Drive Columns : 1
Number of CAPS : 1
Number of Panels : 3
Fibre : 1 Gig optical, 50um multi-mode
Library Worldwide Name:50:01:04:F0:00:6E:49:CA
WWN Feature Enabled : False
------- STATUS INFORMATION -------
Date : 7/10/2009
Time : 19:1:43
Library Status : Ready
------- LIBRARY REVISION INFORMATION -------
Library Hardware Rev : MPCL 51001316
Library Firmware Rev : 3.07.00
Library Build Date : Feb 6 2004 17:24:09
Drive element #500 firmware rev.:4770
Drive element #503 firmware rev.:
Drive element #502 firmware rev.:67U1
Drive element #501 firmware rev.:4770hi,guys:
pls read below article , if you are hp LTO Drive.
if you have some question also , you can contract me .
my MSN: [email protected]
when you add
This article addresses the minimum library code to support HP LTO Gen-3 Drive.
Steps to Follow
The minimum level of L180/700/1400 library firmware to support the HP LTO Gen-3 drive is 3.08.01.
This firmware can be found on the CRC under Code Downloads under L180, L700 or L1400.
Once you have logged on the CRC, click the Code Download button on the left hand side of the page. This will bring up the STK product download information. Click on the library you need to get code for
best regards -
Error after installing tape drive
Hi,
I am a newbie to Solaris, I have a SunFire V120 box, i was trying to install a tape drive(HP SureStore DAT24), i did the install in this manner.
# rm -rf /etc/path_to_inst
# init 6
later at the "ok" prompt i gave "boot -ar" after doing that it asked me various options i accepted the default values, when it asked for rebuilding the /etc/path_to_inst file i said "y", but later everything went wrong.
This is the output,
Sun Fire V120 (UltraSPARC-IIe 548MHz), No Keyboard
OpenBoot 4.0, 512 MB memory installed, Serial #51581741.
Ethernet address 0:3:ba:13:13:2d, Host ID: 8313132d.
Executing last command: boot -ar
Boot device: /pci@1f,0/pci@1/scsi@8/disk@0,0 File and args: -ar
Enter filename [kernel/sparcv9/unix]:
Enter default directory for modules [/platform/SUNW,UltraAX-i2/kernel /platform/
sun4u/kernel /kernel /usr/kernel]:
Name of system file [etc/system]:
SunOS Release 5.8 Version Generic_108528-15 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
|
The /etc/path_to_inst on your system does not exist or is empty.
Do you want to rebuild this file [n]? y
root filesystem type [ufs]:
Enter physical name of root device
[/pci@1f,0/pci@1/scsi@8/disk@0,0:a]:
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_raid failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
WARNING: forceload of misc/md_stripe failed
WARNING: forceload of misc/md_mirror failed
configuring IPv4 interfaces: eri0.
Hostname: aks
mount: /dev/md/dsk/d1 is not this fstype.
/sbin/rcS: /etc/dfs/sharetab: cannot create
failed to open /etc/coreadm.confsyseventd: Unable to open daemon lock file '/etc
/sysevent/syseventd_lock': 'Read-only file system'Configuring /dev and /devices
devfsadm: mkdir failed for /dev 0x1ed: Read-only file system
devfsadm: open failed for /dev/.devfsadm_dev.lock: Read-only file system
Configuring the /dev directory (compatibility devices)
/etc/rcS.d/S50devfsadm: /tmp/sock2path.57: cannot create
The system is coming up. Please wait.
/sbin/mountall: /tmp/sh800: cannot create
rm: Unable to remove directory /tmp: Read-only file system
mkdir: Failed to make directory "/tmp"; Read-only file system
chown: /tmp: Read-only file system
10/5/2005 9:56:42 GMT LOM time reference
/etc/rc2.d/S69inet: /tmp/ifconfig.100: cannot create
grep: can't open /tmp/ifconfig.100
/etc/rc2.d/S69inet: test: argument expected
starting rpc services: rpcbind done.
Setting netmask of eri0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway aks
syslog service starting.
dumpadm: failed to open /etc/dumpadm.conf: Read-only file system
cron could not unlink FIFO: No such file or directory
cron aborted: cannot create fifo queue
! cannot create fifo queue Wed Oct 5 04:56:45 2005
! ******* CRON ABORTED ******** Wed Oct 5 04:56:45 2005
/dev/bd.off: Read-only file system
/etc/rc2.d/S90solaris: /tmp/fgd.207: cannot create
cat: cannot open /tmp/fgd.207
Error -- cannot open error log /.FGDLog
volume management starting.
/etc/rc3.d/S15nfs.server: /tmp/sharetab.232: cannot create
touch: /tmp/sharetab.232 cannot create
mv: cannot access /tmp/sharetab.232
share_nfs: /home/weblogic/SIMecho/logs: No such file or directory
share_nfs: /local/data2/home/weblogic/SIMecho/out: No such file or directory
chmod: WARNING: can't change /etc/dfs/sharetab
The system is ready.
aks console login:
INIT: Command is respawning too rapidly. Check for possible errors.
id: sc "/usr/lib/saf/sac -t 300"
aks console login: aks console login: root
Password:
/etc/logindevperm: /dev/mouse: Read-only file system
/etc/logindevperm: /dev/kbd: Read-only file system
Last login: Wed Oct 5 04:20:28 on console
Oct 5 04:57:46 aks login: ROOT LOGIN /dev/console
root @ aks::/> vi /etc/system
"/etc/system" [Read only] 109 lines, 2687 characters
After doing some google i found that nothing is wrong i just need to comment some lines in the /etc/system file. But still i wasn't able to bacause the system is mounted in read only mode.
Thanking you in advance.
Regards,
Rajendra Rait.I have exactly the same problem after running an fsck to clear corrupt files.
Is there a problem with mirrored disks and using boot -ar to rebuild path_to_inst?
The basic problem is that the root filesystem is coming up as read only
i.e.
The /etc/path_to_inst on your system does not exist or is empty.
Do you want to rebuild this file [n]? y
root filesystem type [ufs]:
Enter physical name of root device
[/pci@1f,0/pci@1/scsi@8/disk@0,0:a]: /pci@1f,0/pci@1/scsi@8/disk@1,0:a
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_raid failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
WARNING: forceload of misc/md_stripe failed
WARNING: forceload of misc/md_mirror failed
configuring IPv4 interfaces: eri0 lo0:1.
Hostname: plant
mount: /dev/md/dsk/d0 is not this fstype.
failed to open /etc/coreadm.confsyseventd: Unable to open daemon lock file '/etc/sysevent/syseventd_lock': 'Read-only file system'Configuring /dev and /devices
devfsadm: mkdir failed for /dev 0x1ed: Read-only file system
devfsadm: open failed for /dev/.devfsadm_dev.lock: Read-only file system
Configuring the /dev directory (compatibility devices)
/etc/rcS.d/S50devfsadm: /tmp/sock2path.52: cannot create
The system is coming up. Please wait.
/sbin/mountall: /tmp/sh730: cannot create
Any help would be gratefully received as I want to avoid rebuilding the server from scratch!
Thanks -
How can I connect a DLT-IV Tape drive with SCSI interface to Quad G5?
I have had no problems with my "Quantum equivalent La Cie DLT-IV Tape drive" on OSX connected to the G4 Quicksilver using an Adaptec 2930CU PCI card - but I can't move that to the G5 as it has to be PCI-Express cards as far as I can tell.
Adaptec pre-sales support inform me that Adaptec have no Mac support in their current product range.
Has anyone found a solution to this connection requirement that will work with Retrospect and DVD StudioPro?
If there is a workable solution which is no longer available to buy - I would still be interested in knowing so I could scour ebay for it.
TIA,
RichardHi Richard;
If you go to ATTO, they are offering a ExpressPCI PSC which include a SCSI bus on sale for $24.11.
Allan -
-36 errors, can't copy files in finder or backup to tape drive
Does anyone know what causes -36 errors and how we can eliminate them? We need to backup our files, but have been unable to do so due to -36 I/O errors in Retrospect. Files on which this error is reported by Retrospect will not copy in the finder, either. I think our hard drive may be bad. How can we recover our files if they cannot be backed-up or copied?
We recently purchased a tape drive for backup, an Exabyte VXA-2 FireWire Tape Drive. We are using VXA-2 V23 (230m) 80GB/160/GB Data Cartridges. I have verified that this drive is supported by Retrospect and that we have the correct tape cartridge. We are backing up one partition of a hard drive that is divided into two partitions. One is the start-up partition, the other is a partition on which we store customer files. We are backing up the partition that stores customer files. The tape drive is attached to and backing up a Macintosh G3 that was recently upgraded from system 9 to OS X 10.3.9 (Panther). The hard drive was not re-formatted before OS X was installed. I have downloaded updates and updated our Retrospect to the latest Retrospect version 6.1.126. I keep getting read errors when trying to backup the customer files partition, although I have ran every good repair program I know of to that partition — TechTool, Disk Warrior and Disk Utility. The tests all say the drive is OK. The only test I have not done recently is a surface scan, as this is an over-night procedure, but plan to do it this evening. A surface scan was done at the beginning of January, but we have continued to have problems. Yesterday morning I ran Disk Utility and it verified that the partition was okay.
I am fairly certain the problem is not with the tape drive, as a test backup up of some of the problem customer files to a file backup on the startup drive also produced many -36 errors. Also the tape drive worked on another Mac with no -36 errors.
The following is an excerpt from the log of last night's backup when the program was backing up (this is a very small portion of the whole log, there was a very long list of files it reported read errors on) Following this excerpt is also an excerpt of errors reported while the program was trying to verify the backup:
∆ Retrospect version 6.1.126
automatically launched at 2/20/2006 7:00 PM
+ Retrospect Driver Update, version 6.1.3.101
+ Normal backup using Files Volume M,W,F BU at 2/20/2006 7:00 PM
To backup set Files Volume M,W,F Set…
- 2/20/2006 7:00:20 PM: Copying Files Volume…
Can't read file “•T+•Files Volume”, error -36 (i/o error, bad media?), path: “Files Volume/•T+•Files Volume”.
Can't read file “•T+•Files Volume(1)”, error -36 (i/o error, bad media?), path: “Files Volume/•T+•Files Volume(1)”.
Can't read file “•T+•Files Volume(2)”, error -36 (i/o error, bad media?), path: “Files Volume/•T+•Files Volume(2)”.
Can't read file “BALANCE PLUS AGREEMENT2.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/BALANCE PLUS AGREEMENT2.p65”.
Can't read file “Balance Plus Agreements”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/Balance Plus Agreements”.
Can't read file “BALANCE PLUS.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/BALANCE PLUS.p65”.
Can't read file “2000/#2(U)”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/cdcguide/2000/#2(U)”.
Can't read file “New Accounts-CSB Final.PMD”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/New Accounts Brochures 10-05/New Accounts-CSB Final.PMD”.
Can't read file “Pacesetter Ad.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Pacesetter Bank/Pacesetter Hometown Financing/Pacesetter Ad.tiff”.
Can't read file “SUMMERTIME.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Summertime/SUMMERTIME.p65”.
Can't read file “RiverFest Comcast1.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/Adelphia/Comcast Logos & Art/RiverFest Comcast1.EPS”.
Can't read file “CHS logo converted to Photoshop”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/CHS Logo-Various forms/CHS logo converted to Photoshop”.
Can't read file “CHS logo adjusted/Photoshop.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/CHS Logo-Various forms/Adjusted by Karen/CHS logo adjusted/Photoshop.eps”.
Can't read file “FWOLO~13.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/FWO logos/FWO Logos Various Formats/EPS/FWOLO~13.EPS”.
Can't read file “wellnotype.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/well logo for MGH/wellnotype.bmp”.
Can't read file “spencer logo bw.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/spencer logo bw.eps”.
Can't read file “spencer logo.TIF”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/spencer logo.TIF”.
Can't read file “DOLCO 900 Master BC 10up old”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-Misc/Dolco Packaging (Bill Cooke)/DOLCO Business Cards/DOLCO BCs/Dolco BCs 10up/DOLCO 900 Master BC 10up old”.
Can't read file “accutech logo color sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Accutech Systems/accutech logo color sep.eps”.
Can't read file “Kerr 1 backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 1 backer.eps”.
Can't read file “LNT price labels.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Jar Toppers / Gift Promo/email to discount labels/LNT price labels.eps”.
Can't read file “A-09.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/A-09.DOT”.
Can't read file “A-14.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/A-14.DOT”.
Can't read file “B-21.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/B-21.DOT”.
Can't read file “B-35.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/B-35.DOT”.
Can't read file “Visor Install fix.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Booklets/Visor Installation Booklet/Visor Install fix.doc”.
Can't read file “Visor Program (SD- 1030) B.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Booklets/Visor Programming Booklet/Visor Program (SD- 1030) B.doc”.
Can't read file “BlueConnect_16pgInstall.qxp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/BlueConnect_16pgInstall.qxp”.
Can't read file “BlueConnect_28pgUserREV.qxp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/BlueConnect_28pgUserREV.qxp”.
Can't read file “BlueConnect Installation Instructions 2.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BlueConnect Installation Instructions 2.doc”.
Can't read file “BlueConnect Installation Instructions rev 10-07-05.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BlueConnect Installation Instructions rev 10-07-05.doc”.
Can't read file “BlueConnectInstall16pg.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BlueConnectInstall16pg.doc”.
Can't read file “CONSUMER USERS MANUA1.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/CONSUMER USERS MANUA1.doc”.
Can't read file “BlueConnect Reg Card.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Registration Cards/BC 203 BlueConnect Reg/BlueConnect Reg Card.doc”.
Can't read file “Living Will insert p1.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Cresthaven Living Will Insert 1/06/Living Will insert p1.eps”.
Can't read file “Living Will insert p2.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Cresthaven Living Will Insert 1/06/Living Will insert p2.eps”.
Can't read file “Elm Ridge 4-c vets Page_1.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Elm Ridge Valor Hill/Elm Ridge 4-c vets Page_1.tiff”.
Can't read file “Elm Ridge 4-c vets Page_2.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Inserts + Circulars/Elm Ridge Valor Hill/Elm Ridge 4-c vets Page_2.tiff”.
Can't read file “Reply card APv.1 (Vets).eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Mailers & Promo/Acacia / Rose Hills mailers/PDFs Converted to art/Reply card APv.1 (Vets).eps”.
Can't read file “FinancialPolicyBroch.pub”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/FinancialPolicyBroch.pub”.
Can't read file “CIO logo color sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/Bus Cards / Appt Cards/CIO Logos/Art/CIO logo color sep.eps”.
Can't read file “FCC Letterhead Indiana.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/FCC (formerly Jaytec)/Letterheads/Envelopes/Memo/FCC Letterhead Indiana.bmp”.
Can't read file “habitat envelope.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Habitat for Humanity/habitat envelope.p65”.
Can't read file “Page 2.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/In Touch Dining (Table Talk)/Platter Chatter - Don Halls/Fix in Quark then print to EPS/Page 2.eps”.
Can't read file “brochure”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/My Hair Broker/brochure”.
Can't read file “brochure-1”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/My Hair Broker/brochure-1”.
Can't read file “brochure”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/My Hair Broker/My Hair Broker recovered files/brochure”.
Can't read file “GIFTBOX.epsbitmap”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/CHARLES/MISC FILES/GIFTBOX.epsbitmap”.
Can't read file “ASC LetterHeadFinal.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Accutech/original art (emailed)/ASC LetterHeadFinal.EPS”.
Can't read file “TSC 104 and 111.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/Fixed Files/TSC 104 and 111.pdf”.
Can't read file “TSC 116 Initial Note.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/Fixed Files/TSC 116 Initial Note.pdf”.
Can't read file “sptslogo screen sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Sports Physical Therapy (SPTS)/logos & art/sptslogo screen sep.eps”.
Can't read file “sptslogo spot sep cool gray.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Sports Physical Therapy (SPTS)/logos & art/sptslogo spot sep cool gray.eps”.
Can't read file “A Stout BCs 12 up all names”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 12 up all names”.
Can't read file “bifold on grstrosprep2.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/03DET0609 (CGIC Prep 4)/bifold on grstrosprep2.qxd”.
Can't read file “MAP_DUO.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/04DET0076 (CGIC Prep 1)/Pictures/MAP_DUO.tif”.
Can't read file “bifold on grstrosprep2.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/03DET0609 (CGIC Prep 4)/bifold on grstrosprep2.qxd”.
Can't read file “Beth Business Card.2”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/Beth Business Card.2”.
Can't read file “frankfort map gray.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/frankfort map gray.tif”.
Can't read file “lafayette map.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/lafayette map.tif”.
Can't read file “white county gray.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/white county gray.tif”.
Can't read file “Hoosier Lottery HL-ARC.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Hoosier Lottery/Age Restriction Cards 2005/Hoosier Lottery HL-ARC.pmd”.
Can't read file “HCI_card2.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Hunter Construction Inc./HCI_card2.tiff”.
Can't read file “IOH 016 steroid epideral inject”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/IOH - Indy Ortho Hospital/IOH 016 steroid epideral inject”.
Can't read file “IOHLOGO.TIF”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/IOH - Indy Ortho Hospital/Indiana Ortho Hospital logos/logo file from customer/IOHLOGO.TIF”.
Can't read file “OIFI 610 Reg Env Fishers.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/Envelopes/OIFI 610 Reg Env Fishers.pmd”.
Can't read file “ORTHO 542 Memo master stock 9up”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/ORTHO forms/ORTHO 542 Memo master stock 9up”.
Can't read file “Ortho 542 memo NEW master.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/ORTHO forms/Ortho 542 memo NEW master.pmd”.
Can't read file “SESC 042 Local Discharge.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/SESC Southeast Surgery Center/SESC 042 Local Discharge.pmd”.
Can't read file “Richmond Baking from scan.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Richmond Baking/Richmond Baking from scan.eps”.
Can't read file “RPL 300C 4-02.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Richmond Power & Light/RPL 300C 4-02.p65”.
Can't read file “RPL lighter.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Richmond Power & Light/RPL lighter.pmd”.
Can't read file “Burlington BLUE.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Unified Group Services/Burlington Motor Carriers/Burlington BLUE.eps”.
Can't read file “Burlington RED.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Unified Group Services/Burlington Motor Carriers/Burlington RED.eps”.
Can't read file “WW-SUMMER EVENT Postcard.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Wilson Wines/WW-SUMMER EVENT Postcard.p65”.
Can't read file “OSBORNS.TIF”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Debbie/Albany EMS/AEMS spaghetti poster/OSBORNS.TIF”.
Can't read file “BCH 7019 Physicians Orders”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Debbie/Blackford Community Hospital/BCH forms/BCH 7019 Physicians Orders”.
Can't read file “BCH 7066 Outcomes Walk Test”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Debbie/Blackford Community Hospital/BCH forms/BCH 7066 Outcomes Walk Test”.
EXCERPT FROM LOG WHEN TRYING TO VERIFY BACKUP:
2/20/2006 10:51:12 PM: Comparing Files Volume…
Can't read file “CS Booklet Acknow Form.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/AAAA/CS Booklet Acknow Form.pmd”.
File “BV Layout First Quarter.pmd”: miscompare at data offset 221,055, path: “Files Volume/Customer files/Bill Morris/BV Layout First Quarter.pmd”.
Can't read file “E FUNDS TRANSFER AGREE.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/E FUNDS TRANSFER AGREE.doc”.
Can't read file “BALANCE PLUS AGREEMENT2”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Balance Plus Account Agreements/BALANCE PLUS AGREEMENT2”.
Can't read file “Blackford Golf Club.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Blackford Golf Club/Blackford Golf Club.p65”.
Can't read file “INVESTMENT BROCHURE 7-04.PMD”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Investment Brochure/INVESTMENT BROCHURE 7-04.PMD”.
Can't read file “Pacesetter Stmt-Hartford 04 old”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Pacesetter Bank/Hartford City/Pacesetter Stmt-Hartford 04 old”.
Can't read file “TELEBANKING.P65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Bill Morris/Pacesetter Tele-Banking/TELEBANKING.P65”.
Can't read file “ *chs FHC logos (USE ME)”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/CHS Logo-Various forms/ *chs FHC logos (USE ME)”.
Can't read file “FWOLOG~D.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/FWO logos/FWO Logos Various Formats/EPS/FWOLOG~D.EPS”.
Can't read file “FWOLO~18.EPS”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/FWO logos/FWO Logos Various Formats/EPS/FWOLO~18.EPS”.
Can't read file “Jiont Replacement Logo.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/logos/Jiont Replacement Logo.bmp”.
File “SV Name 1 line 8x40p.tif”: miscompare at data offset 994,239, path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/St. Vincent Scans/Logos/SV Name 1 line 8x40p.tif”.
Can't read file “SV-birds to side, no addr.tiff”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/ Customer Logos & Art/St. Vincent Scans/Logos/SV-birds to side, no addr.tiff”.
Can't read file “Spencer logo bw.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/Spencer logo bw.bmp”.
Can't read file “spencer printing”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Customer Logos/Art --> Keep Me!/spencer new logo/spencer printing”.
File “Appt Cards No Logo 10-up”: miscompare at data offset 94,208, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/Appointment Cards/Appt Cards No Logo 10-up”.
File “BMA 202,BMA 2114 10up Musselman”: miscompare at data offset 52,622, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/Appointment Cards/BMA 202,BMA 2114 10up Musselman”.
File “BMA Non-Security RX Pads”: miscompare at data offset 81,922, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Horiz/BMA Non-Security RX Pads”.
File “BMA 2150 White Script-Singleton”: miscompare at data offset 606,218, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Verticl/BMA 2150 White Script-Singleton”.
File “BMA 2170 White Script-C Frazier”: miscompare at data offset 512,002, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Verticl/BMA 2170 White Script-C Frazier”.
File “BMA 2186 White Script-Laur”: miscompare at data offset 577,586, path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-BMA/RX Pads/White Scripts, Non-Sec, Verticl/BMA 2186 White Script-Laur”.
Can't read file “DOLCO BC Ramos/Hernandez”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Bill Cooke/Bill Cooke-Misc/Dolco Packaging (Bill Cooke)/DOLCO Business Cards/DOLCO BCs/Dolco BCs 10up/DOLCO BC Ramos/Hernandez”.
Can't read file “accutech ACT 201 Letterhead”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Accutech Systems/accutech ACT 201 Letterhead”.
Can't read file “Allied rent no more Postcard”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Allied Home Mortgage/Rent No More postcard/Allied rent no more Postcard”.
Can't read file “coupon grouping copy.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Alltrista 3 Fair Coupon/Fair coupon/Art/coupon grouping copy.eps”.
Can't read file “Kerr 1.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 1.eps”.
Can't read file “Kerr 3 backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 3 backer.eps”.
Can't read file “Kerr 3.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 3.eps”.
Can't read file “Kerr 5 backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5 backer.eps”.
Can't read file “Kerr 5 blue backer.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5 blue backer.eps”.
Can't read file “Kerr 5 blue.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5 blue.eps”.
Can't read file “Kerr 5.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Ball & Kerr coupons/Coupons converted to EPS/Kerr 5.eps”.
Can't read file “JAR 402 P&C Env. Corporate”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Letterheads & Envelopes/Envelopes/JAR 402 P&C Env. Corporate”.
Can't read file “Elite Presentation Cover”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/Misc/Elite Presentation Cover”.
File “Consumer DCRA (3)”: miscompare at data offset 13,874, path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/JARDEN Benefit Choices/Consumer Manufacturing Cloquet/(we don't print these sections)/Consumer DCRA (3)”.
Can't read file “A-06.DOT”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Alltrista / Jarden/SPD Books / Benefits/OBSOLETE - VERY OLD/alltrista policy book '99/A-06.DOT”.
Can't read file “Visor Program fix.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Booklets/Visor Programming Booklet/Visor Program fix.doc”.
Can't read file “BC User Manual rev 10-07-05.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BC User Manual rev 10-07-05.doc”.
Can't read file “BC User Manual rev 10-24-05.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett books 1.05/ELITE FORMS/ORIG FILES/BC User Manual rev 10-24-05.doc”.
Can't read file “Homelink WARRANTY.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bartlett Corp./Bartlett Registration Cards/BC 202 Home Link Reg/Homelink WARRANTY.doc”.
Can't read file “Open House Card 2 up back”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Bill Frazier Mobile Homes/Open House Card 2 up back”.
Can't read file “Elite's presort permit 228.p65”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Cemeteries (Futura Group)/Mailers & Promo/Elite's presort permit 228.p65”.
File “GAM 100 Gyn Assoc Chg Slip”: miscompare at data offset 30,334, path: “Files Volume/Customer files/Elite/Brad/CHARGE SLIPS/GAM 100 Gyn Assoc Chg Slip”.
Can't read file “CIO BC Amy Myers Train.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/Bus Cards / Appt Cards/Individuals' BCs/CIO BC Amy Myers Train.pmd”.
Can't read file “CIO 281 Medical Release Form”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/CIO Forms/CIO 281 Medical Release Form”.
Can't read file “CIO 106 P & OT newest.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/CIO Forms/CIO 106/CIO 106 P & OT newest.pdf”.
Can't read file “CIO COLOR TABS 3 BANK”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/CIO - Central Indiana Ortho/Misc/CIO COLOR TABS/CIO COLOR TABS 3 BANK”.
Can't read file “Cisco multi-ch 2-color.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Comcast/Flyers/Digital / Internet Flyers/6x9 69.95 Limited-time offer/Cisco multi-ch 2-color.eps”.
Can't read file “Z4935.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Comcast/Race for Cure ad/Z4935.eps”.
File “Comcast Rates Multi 6up”: miscompare at data offset 2,510,558, path: “Files Volume/Customer files/Elite/Brad/Comcast/Rate Cards & Channel Line-ups/ Comcast Rates & Lineups 2006/ trash before next run/Comcast Rates Multi 6up”.
Can't read file “Comcast Samples Digi Channels-5”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Comcast/Rate Cards & Channel Line-ups/ Comcast Rates & Lineups 2006/ trash before next run/Comcast Samples Digi Channels-5”.
Can't read file “FCC Bus Card logo.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/FCC (formerly Jaytec)/Business Cards/FCC Bus Card logo.bmp”.
File “FGC 200 PRAYER CHAIN”: miscompare at data offset 110,530, path: “Files Volume/Customer files/Elite/Brad/Four Square Church/FGC 200 PRAYER CHAIN”.
Can't read file “Icon◊”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/In Touch Dining (Table Talk)/Icon◊”.
Can't read file “Customer Service Record partial”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Marcum Racing/Customer Service Record partial”.
Can't read file “PE 400 #10 Window Envelope”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Peerless Electric/PE 400 #10 Window Envelope”.
Can't read file “spartech.doc”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Brad/Spartech/spartech logos/spartech.doc”.
Can't read file “neb_Logo.bmp”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Northeast Bank/neb_Logo.bmp”.
Can't read file “logo1web.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/logo1web.tif”.
Can't read file “TSC 200 RX Pad”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms/Fixed Files/TSC 200 RX Pad”.
Can't read file “TSC 104 and 111.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms 2/04/TSC 104 and 111.pdf”.
Can't read file “TSC 105 General Progress.pdf”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Shelbourne Clinic forms 2/04/TSC 105 General Progress.pdf”.
Can't read file “sptslogo spot sep.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Clayton/Sports Physical Therapy (SPTS)/logos & art/sptslogo spot sep.eps”.
Can't read file “A Stout BCs 10 up all names”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 10 up all names”.
Can't read file “A Stout BCs 12 up Sales”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 12 up Sales”.
Can't read file “A Stout BCs 12 up template”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/A Stout Furniture & Bedding/Business Cards/A Stout BCs 12 up template”.
Can't read file “AERCO Bryant 8-09-05.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/AERCO/AHC Bryant New Equip Line/AERCO Bryant 8-09-05.pmd”.
Can't read file “6HR_DRINK.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/03DET0609 (CGIC Prep 4)/Pictures/6HR_DRINK.tif”.
Can't read file “reprint-colonos prep2 fix.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Old Files (backup)/04DET0076 (CGIC Prep 1)/reprint-colonos prep2 fix.qxd”.
Can't read file “6HR_DRINK.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/03DET0609 (CGIC Prep 4)/Pictures/6HR_DRINK.tif”.
Can't read file “6HR_FOOD.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/03DET0609 (CGIC Prep 4)/Pictures/6HR_FOOD.tif”.
Can't read file “reprint-colonos prep2 fix.qxd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/04DET0076 (CGIC Prep 1)/reprint-colonos prep2 fix.qxd”.
Can't read file “MAP_DUO.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Cntrl Ind Gastr/Use Current Files on PC!!/Central Ind Gastro Brochures/04DET0076 (CGIC Prep 1)/Pictures/MAP_DUO.tif”.
Can't read file “Beth Business Card.1”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/Beth Business Card.1”.
Can't read file “Lafayette_Logo.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Art/Lafayette_Logo.tif”.
Can't read file “ECG 302 (partial)”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/ECG Forms/ECG 302 (partial)”.
Can't read file “ECG 532 Surgery Chart Bond LH”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/ECG Forms/ECG 532 Surgery Chart Bond LH”.
Can't read file “carrick.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Memo Pads/ECG 506 From Desk Of/carrick.eps”.
Can't read file “ECG 506 note pad Steph Carrick”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Memo Pads/ECG 506 From Desk Of/ECG 506 note pad Steph Carrick”.
Can't read file “Confetti Canopy3.tif”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/Refer A Friend LVC Card/Confetti Canopy3.tif”.
Can't read file “ECG RX 03 B Cyclogel/Isopto”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 03 B Cyclogel/Isopto”.
Can't read file “ECG RX 03 Cyclogel/Homatropine”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 03 Cyclogel/Homatropine”.
Can't read file “ECG RX 13 Eye Center Group Sec.”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 13 Eye Center Group Sec.”.
Can't read file “ECG RX-17 Ocuflox 11/02”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Eye Center/RX Pads/ECG RX 17/ECG RX-17 Ocuflox 11/02”.
Can't read file “Hoosier Lottery HL-ARC 8up.pmd”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Hoosier Lottery/Age Restriction Cards 2005/Hoosier Lottery HL-ARC 8up.pmd”.
Can't read file “oibcards3.eps”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/IOH - Indy Ortho Hospital/Indiana Ortho Hospital logos/oibcards3.eps”.
File “calendarVickersFinal.p65”: miscompare at data offset 2,002,278, path: “Files Volume/Customer files/Elite/Dave/Neff Engineering/Neff Engineering Other/calendarVickersFinal.p65”.
File “Norfleet BC Jason 10up”: miscompare at data offset 1,760,878, path: “Files Volume/Customer files/Elite/Dave/norfleet BC/Norfleet BC Jason 10up”.
File “BCs-New-PM6.5”: miscompare at data offset 2,111,727, path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/Business Cards/BCs-New-PM6.5”.
Can't read file “OIK Miller Only”, error -36 (i/o error, bad media?), path: “Files Volume/Customer files/Elite/Dave/Ortho Indy/Business Cards/BCs-all old ones/OIK/OIK Miller Only”.
The only suggestion I have come across is to copy the files to another drive, but this is impossible because the problem files cannot be copied. If anyone has any other suggestion for fixing this, I would appreciate any input. Thanks.
Mac G3 Blue & White 300 mhz Mac OS X (10.3.9) Original hard drive replaced with a 120 GB Maxtor 6Y120P0Tech Tool, Disk Warrior, and Disk Utility all work to make sure the directory is Okay. They do not read every block.
I think you should do the surface scan you spoke of. What program do you use for this?
If you cannot copy a file in the Finder without an I/O error, the file is damaged or the drive had bad blocks.
Be sure you also downloaded the drivers module when you updated retrospect. -
I'm Currently running solaris 9 and trying to hook up a
Eliant 820 tape drive. how do I modify the st.conf. is it
one line at a time ?. also is there a way to upgrade the firmware/ patches from solaris/sun?. all I get is I/O errors
everytime I run sunvts. I ran cleaning tapes/ new tapes
through about 3 times. I read something about
modyfying the st.conf.
I have no problems with the exabyte 8505 tape drives
just the eliant 820's.Hi Ketan,
>> unable to initialize ASPI manager
Check SCSI id on your tape device. Try to use different SCSI number or try install correct device driver of the tape device.
Best regards,
Orkun Gedik -
Tape Drives set automatically to 1
Hi all,
After I set some configuration in the "Backup Settings", I found that "Tape Drives" filed is automatically filled with the value: "1". I tested the issue on may machines and the result was the same.
Steps to generate the issue:
1. Login to the Database Control EM as SYS
2. Follow the following links:
Maintenace Tab -> Backup Settings -> Backup Set
3. Set "Maximum Backup Piece (File) Size" to 4 GB
4. Click on "Policy" link
5. Mark the checkbox "Automatically Backup Controlfile ..."
6. Set "Retain backups that are necessary for a recovery .." to 2 Days
7. Click on "OK" button
Now the settings should be saved. Click again on "Backup Settings", you will see that "Tape Drives" field is filled with "1". By the way, NO tape is installed on the machine.
This leads me to many problems. For example, trying to recover a tablespace failed because RMAN is creating channel of Tape type (although I sat Disk as the default channel)
I hope to see any help on this issue here because it caused me many problems.
Thanks in advance.
Oracle 10g R2 on Windows XP SP2.This is bug 4338664 "EM DBCONSOLE DEFAULTS TO SBT_TAPE REGARDLESS OF RMAN SETTINGS"
Open a RMAN command session and remove the tape setting:
<RMAN Configure CHANNEL device type 'SBT_TAPE' clear;
Werner -
Tape drive and pci-x card with Solaris 10 on VMWare environment
I have a Sun X4170 server (x84_64) running VMWare ESXi 4.0. On it I have two VM guests- my production file server running Solaris 10 U7 and a test file server running Solaris 10 U9.
The X4170 has a PCI-X LSI Logic dual external U320 parallel scsi card. I have a tape drive + auto loader cabled to the X4170. It is a Quantum branded autoloader but I believe the tape drive itself is HP. The autoloader+tape drive share a single SCSI ID (6) but have separate LUNS.
I have two choices for making this system accessible to the OS:
- Virtualize the tape drive and loader individually.
- In VMWare, enable the scsi card as a pass through device. The SCSI card is then added as PCI device to the virtual machine (actually two devices since it is a dual scsi card.)
I had virtualized a single-drive tape drives with Vmware in the past.
However, when I tried I virtualize tape drive and loader, Solaris complained about the scsi id’s being invalid. I don’t think it likes two devices with a single scsi ID. Also, I think I need the backup software to see the REAL tape drive and autoloader (for inventory, changing tapes etc)
On the Solaris 10 U9 “Test” machine:
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
mpt1:scsi scsi-bus connected configured unknown
mpt1:scsi::rmt/0 tape connected configured unknown
mpt1:scsi::scsi/changer/c2t6d med-changer connected configured unknown
mpt2:scsi scsi-bus connected unconfigured unknown
cfgadm: Configuration administration not supported: Error: hotplug service is pr
obably not running, please use 'svcadm enable hotplug' to enable the service. Se
e cfgadm_shp(1M) for more details.
bash-3.00# mt status
/dev/rmt/0n: no tape loaded or drive offline
bash-3.00#
# svcadm enable hotplug
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
mpt1:scsi scsi-bus connected configured unknown
mpt1:scsi::rmt/0 tape connected configured unknown
mpt1:scsi::scsi/changer/c2t6d med-changer connected configured unknown
mpt2:scsi scsi-bus connected unconfigured unknown
pcie160 scsi/hp connected configured ok
pcie161 unknown empty unconfigured unknown
pcie162 unknown empty unconfigured unknown
On the Solaris 10 U7 “Production” machine:
The hotplug service did not exist until I installed the following patches
142934-02 SunOS 5.10_x86: failsafe patch
142910-17 SunOS 5.10_x86: kernel patch
144489-02 SunOS 5.10_x86: kernel patch
# svcadm enable hotplug
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
c1::scsi/direct/c1t0d0 disk connected configured unknown
c4 scsi-bus connected unconfigured unknown
c5 scsi-bus connected unconfigured unknown
pcie160 scsi/hp connected configured ok
Running “devfsadm –v “ does not change anything
Any ideas? Maybe a need to update the MPT driver or is that dangerous?
ThanksActually, updating the kernel patches (and enabling hot plug service) did solve the problem. At some point during between testing the system before and after patching, the tape drive got turned off. Since the system patching was being done remotely it was not immediately obvious that the tape drive was off.
-
Can I use tape drive for backup with win 2012 OS & Sybase database?
I have installed enhancement package 6 for SAP ERP 6.0 with OS windows 2012 and database sybase ASE(15.7.050). I am facing problem while taking database backup on tape drive. I want to know how to initialize tape drive in case of sybase DB and is it possible to take back-up on same. I failed to schedule backup from DB13 so now I am doing that activity by command line. So please help me to solve these issues.
Here I am attaching some files related with backup commands that presently I am using. My SAP system ID is DQS.That output actually looks pretty good, it was dumping to the tape drive, it just ran out of tape because the drive apparently doesn't automatically detect when it is reaching the end.
For the next step, try adding a CAPACITY parameter to your dump command as discussed at these places in the documentation.
Specifying tape capacity for dump commands
Set the Maximum Capacity for a Tape Drive
Your output above shows it was able to dump 87565594 KB before it ran out of tape,
so lets be a little conservative and try
dump database DQS to TAPE1 with capacity = 87000000, init
go
When the dump reaches that point, ASE should prompt you to pop in another new tape
and then issue the sp_volchanged procedure from a second session (it will tell you what parameters to use for sp_volchanged).
Note: once we get the dump working successfully, we can then create a logical dump device that would store the capacity value, and create a full dump configuration so you gain all the new functionality like dump history, etc.
Enhancements to dump and load
-bret -
How to Mount IBM Tape Drive on windows 2008 SAP Platform
Hi Expert,
What are the steps for Mount IBM Tape drive on windows 2008 SAP Platform on Sybase Database ?
After mounting IBM Tape Drive on windows 2008 SAP Platform , can i use this for Sybase Backup purpose from DBACOKPIT ?
Kindly reply me ASAP.Dear All,
Problem Solved by below activity :-
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc38421.1572/doc/html/san1335472614455.html?resultof=%22%64%75%6d%70%22%20%22%64%61%74%61%62%61%73%65%22%20%22%64%61%74%61%62%61%73%22%20
1> dump database pubs2 to "\\.\TAPE0"
2> go
1> load database pubs2 from \\.\TAPE0
2> go
Please review any of these SAP Notes to see if you would be able to
setup dump/load and then copy to tape as an option.
1585981 SYB: Ensuring Recoverability for Sybase ASE (has some
comments about storing to tape drive)
1588316 SYB: Configure automatic database and log backups
1611715 SYB: How to restore a Sybase ASE database server (Windows)
1618817 SYB: How to restore a Sybase ASE database server (UNIX)
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
Configuration DEVDB:
1> sp_config_dump @config_name='DEVDB' ,
2> @stripe_dir = "\\.\Tape0" ,
3> @compression = '101' ,
4> @capacity = '1520000040960' ,
5> @verify = 'header'
6> go
Configuration DEVLOG:
1> sp_config_dump @config_name='DEVLOG' with init,
2> @stripe_dir = "\\.\Tape0" ,
3> @compression = '101' ,
4> @capacity = '1520000040960' ,
5> @verify = 'header'
6> go
1> dump database DEV using config = 'DEVDB' with capacity = 87000000, init
2> go
1> dump transaction DEV using config = 'DEVLOG' with capacity = 87000000, init
2> go
and
1> dump database DEV to "\\.\TAPE0" with capacity = 87000000, init
2> go
1> dump transaction DEV to "\\.\TAPE0" with capacity = 87000000, init
2> go -
How to create VTL and tape drives
hi!
i want to create one library like"vlib" containing two tape drives vt1 and vt2 having equal space of 512 MB.
Can u plz check that i am on right track
ob>mkdev -t library -o -S 2 -a test:/d01/secure/vlib -v vlib
ob>mkdev -t library -o -a test:/d01/secure/vt1 -v -l vlib -d 1 vt1
ob>mkdev -t library -o -S 2 -a test:/d01/secure/vt2 -v -l vlib -d 2 vt2
Insert Volume
now here is where i am confuse .....
ob>insertvol -L vlib -c 512 unlabeled 1-2
now how to insertvol in tapes .....by above command is this volume available to all tapes in that library.
actually i want that i have two tapes vt1 and vt2 ,both should have space 512 mb now when i take full database backup through rman ....after when vt1 becomes full it start utilizing other tape vt2 automatically.
plz helpppppppppthank you ....but please can u check that what i have done...i am giving detail......plzzz
STEP 1)
ob> mkdev -t library -o -S 2 -a test:/d01/secure/vlib -v vlib
ob> insertvol -L vlib -c 512 unlabeled 1-2
ob> lsvol -L vlib
Inventory of library vlib:
in 1: unlabeled, barcode fec96134fdea10285e7000c2944f637
in 2: unlabeled, barcode feef494efdea10285e7000c2944f637
ob> mkdev -t tape -o -a test:/d01/secure/vt1 -v -l vlib -d 1 vt1
ob> lsvol -L vlib -D vt1
Inventory of library vlib:
* in 1: unlabeled, barcode fec96134fdea10285e7000c2944f637
* in 2: unlabeled, barcode feef494efdea10285e7000c2944f637
*: in use list
ob> mkdev -t tape -o -a test:/d01/secure/vt2 -v -l vlib -d 2 vt2
ob> mkdev -t tape -o -a test:/d01/secure/vt3 -v -l vlib -d 3 vt3
STEP 2)
Then i created backup storage as RMAN default and selected vt1 as tape.
after that with rman i took full database backup.
ob> lsjob -l
oracle/6:
Type: database orcl (dbid=1233653080)
Scheduled time: none
State: processed; Oracle job(s) scheduled
Priority: 100
Run on host: (administrative server)
Attempts: 0
oracle/6.1:
Type: datafile backup
Backup piece: 13l69bcu_1_1
Family: RMAN-DEFAULT
Encryption: awaiting job completion
Scheduled time: none
State: running since 2010/02/17.22:58
Priority: 100
Run on host: test
Attempts: 1
[oracle@test ~]$ rman target /
Recovery Manager: Release 10.2.0.4.0 - Production on Wed Feb 17 21:58:07 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: ORCL (DBID=1233653080)
RMAN> run
2> {
3> allocate channel ch1 device type sbt;
4> backup database tag=fULLBACKUP1;
5> release channel ch1;
6> }
allocated channel: ch1
channel ch1: sid=134 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 17-FEB-10
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00001 name=/d01/app/oracle/product/10.2.0/oradata/orcl/system01.dbf
input datafile fno=00003 name=/d01/app/oracle/product/10.2.0/oradata/orcl/sysaux01.dbf
input datafile fno=00002 name=/d01/app/oracle/product/10.2.0/oradata/orcl/undotbs01.dbf
input datafile fno=00005 name=/d01/app/oracle/product/10.2.0/oradata/orcl/example01.dbf
input datafile fno=00004 name=/d01/app/oracle/product/10.2.0/oradata/orcl/users01.dbf
channel ch1: starting piece 1 at 17-FEB-10
channel ch1: finished piece 1 at 17-FEB-10
piece handle=13l69bcu_1_1 tag=FULLBACKUP1 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:09:22
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
including current control file in backupset
including current SPFILE in backupset
channel ch1: starting piece 1 at 17-FEB-10
channel ch1: finished piece 1 at 17-FEB-10
piece handle=14l69buk_1_1 tag=FULLBACKUP1 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:57
Finished backup at 17-FEB-10
released channel: ch1
ob> catxcr oracle/6
Error: unable to open transcript for oracle/6 - No such file or directory
oracle/6.1: 2010/02/17.22:58:52 ______________________________________________________________________
oracle/6.1: 2010/02/17.22:58:52
oracle/6.1: 2010/02/17.22:58:52 Transcript for job oracle/6.1 running on test
oracle/6.1: 2010/02/17.22:58:52
oracle/6.1: Volume label:
oracle/6.1: Volume tag: fec96134fdea10285e7000c2944f637
oracle/6.1: Volume UUID: 25fb9f22-fdf2-102c-a243-000c2944f637
oracle/6.1: Volume ID: RMAN-DEFAULT-000006
oracle/6.1: Volume sequence: 1
oracle/6.1: Volume set owner: root
oracle/6.1: Volume set created: Wed Feb 17 22:58:58 2010
oracle/6.1: Media family: RMAN-DEFAULT
oracle/6.1: Volume set expires: never; content manages reuse
oracle/6.1: Original UUID: 25fb9f22-fdf2-102c-a243-000c2944f637
oracle/6.1:
oracle/6.1: Archive label:
oracle/6.1: File number: 1
oracle/6.1: File section: 1
oracle/6.1: Owner: root
oracle/6.1: Client host: test
oracle/6.1: Backup level: 0
oracle/6.1: S/w compression: no
oracle/6.1: Archive created: Wed Feb 17 22:58:58 2010
oracle/6.1: Backup piece name: 13l69bcu_1_1
oracle/6.1: Backup db name: orcl
oracle/6.1: Backup db id: 1233653080
oracle/6.1: Backup copy number: not applicable
oracle/6.1: Backup content: full
oracle/6.1:
oracle/6.1:
oracle/6.1: End of tape has been reached. Please wait while I rewind and unload the tape.
oracle/6.1: The Volume ID of the next tape to be written is RMAN-DEFAULT-000007.
oracle/6.1: The tape has been unloaded.
oracle/6.1:
oracle/6.1: Volume label:
oracle/6.1: Volume tag: feef494efdea10285e7000c2944f637
oracle/6.1: Volume UUID: 27fb5faa-fdf3-102c-a243-000c2944f637
oracle/6.1: Volume ID: RMAN-DEFAULT-000007
oracle/6.1: Volume set ID: RMAN-DEFAULT-000006
oracle/6.1: Previous volume: RMAN-DEFAULT-000006
oracle/6.1: Volume sequence: 2
oracle/6.1: Volume set owner: root
oracle/6.1: Volume set created: Wed Feb 17 22:58:58 2010
oracle/6.1: Media family: RMAN-DEFAULT
oracle/6.1: Volume set expires: never; content manages reuse
oracle/6.1: Original UUID: 27fb5faa-fdf3-102c-a243-000c2944f637
oracle/6.1:
oracle/6.1: Archive label:
oracle/6.1: File number: 1
oracle/6.1: File section: 2
oracle/6.1: Owner: root
oracle/6.1: Client host: test
oracle/6.1: Backup level: 0
oracle/6.1: S/w compression: no
oracle/6.1: Archive created: Wed Feb 17 22:58:58 2010
oracle/6.1: Backup piece name: 13l69bcu_1_1
oracle/6.1: Backup db name: orcl
oracle/6.1: Backup db id: 1233653080
oracle/6.1: Backup copy number: not applicable
oracle/6.1: Backup content: full
oracle/6.1:
oracle/6.1:
oracle/6.1: Backup statistics:
oracle/6.1: status 0
oracle/6.1: devices vt1
oracle/6.1: devices 1
oracle/6.1: volumes RMAN-DEFAULT-000006 RMAN-DEFAULT-000007
oracle/6.1: voltags fec96134fdea10285e7000c2944f637 feef494efdea10285e7000c2944f637
oracle/6.1: file 1
oracle/6.1: host test
oracle/6.1: encryption on aes192
oracle/6.1: start_time Wed Feb 17 2010 at 22:58:58 (1266429538)
oracle/6.1: end_time Wed Feb 17 2010 at 23:07:31 (1266430051)
oracle/6.1: backup_time Wed Feb 17 2010 at 22:58:58 (1266429538)
oracle/6.1: dev_kbytes 668298
oracle/6.1: dev_iosecs 513
oracle/6.1: dev_iorate 1.3 MB/S
oracle/6.1: wrt_iosecs 508
oracle/6.1: wrt_iorate 1.3 MB/S
oracle/6.1: physical_blks_written 1336576
oracle/6.1: write_errors 0
oracle/6.1: physical_blks_read 0
oracle/6.1: read_errors 0
oracle/6.1: error_rate 0%
ob> lsvol -L vlib
Inventory of library vlib:
in 1: volume RMAN-DEFAULT-000006, barcode fec96134fdea10285e7000c2944f637, full, content manages reuse
in 2: volume RMAN-DEFAULT-000007, barcode feef494efdea10285e7000c2944f637, 368736 kb remaining, content manages reuse
STEP 3)
Then i took again full database backup just to verify that other tape drives will be use or not.....
RMAN> run
2> {
3> allocate channel ch1 device type sbt;
4> backup database tag=FULLBACKUP2;
5> release channel ch1;
6> }
allocated channel: ch1
channel ch1: sid=134 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 17-FEB-10
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00001 name=/d01/app/oracle/product/10.2.0/oradata/orcl/system01.dbf
input datafile fno=00003 name=/d01/app/oracle/product/10.2.0/oradata/orcl/sysaux01.dbf
input datafile fno=00002 name=/d01/app/oracle/product/10.2.0/oradata/orcl/undotbs01.dbf
input datafile fno=00005 name=/d01/app/oracle/product/10.2.0/oradata/orcl/example01.dbf
input datafile fno=00004 name=/d01/app/oracle/product/10.2.0/oradata/orcl/users01.dbf
channel ch1: starting piece 1 at 17-FEB-10
ob> catxcr oracle/8
Error: unable to open transcript for oracle/8 - No such file or directory
oracle/8.1: 2010/02/17.23:19:45 ______________________________________________________________________
oracle/8.1: 2010/02/17.23:19:45
oracle/8.1: 2010/02/17.23:19:45 Transcript for job oracle/8.1 running on test
oracle/8.1: 2010/02/17.23:19:45
oracle/8.1: Volume label:
oracle/8.1: Volume tag: feef494efdea10285e7000c2944f637
oracle/8.1: Volume UUID: 27fb5faa-fdf3-102c-a243-000c2944f637
oracle/8.1: Volume ID: RMAN-DEFAULT-000007
oracle/8.1: Volume set ID: RMAN-DEFAULT-000006
oracle/8.1: Previous volume: RMAN-DEFAULT-000006
oracle/8.1: Volume sequence: 2
oracle/8.1: Volume set owner: root
oracle/8.1: Volume set created: Wed Feb 17 22:58:58 2010
oracle/8.1: Media family: RMAN-DEFAULT
oracle/8.1: Volume set expires: never; content manages reuse
oracle/8.1: Original UUID: 27fb5faa-fdf3-102c-a243-000c2944f637
oracle/8.1:
oracle/8.1: Archive label:
oracle/8.1: File number: 3
oracle/8.1: File section: 1
oracle/8.1: Owner: root
oracle/8.1: Client host: test
oracle/8.1: Backup level: 0
oracle/8.1: S/w compression: no
oracle/8.1: Archive created: Wed Feb 17 23:19:51 2010
oracle/8.1: Backup piece name: 15l69ckd_1_1
oracle/8.1: Backup db name: orcl
oracle/8.1: Backup db id: 1233653080
oracle/8.1: Backup copy number: not applicable
oracle/8.1: Backup content: full
oracle/8.1:
oracle/8.1:
oracle/8.1: End of tape has been reached. Please wait while I rewind and unload the tape.
oracle/8.1: The Volume ID of the next tape to be written is RMAN-DEFAULT-000008.
oracle/8.1: The tape has been unloaded.
oracle/8.1:
oracle/8.1: Error: couldn't perform auto-swap - can't find usable volume in library (OB device mgr)
oracle/8.1: Enter a command from the following list:
oracle/8.1: load <n> .. load the tape from element <n> into the drive
oracle/8.1: unload <n> .. unload the tape from the drive into element <n>
oracle/8.1: help .. display other commands to modify drive's database
oracle/8.1: go .. to use the tape you selected
oracle/8.1: quit .. to give up and abort this backup or restore
oracle/8.1: :
ob> lsvol -L vlib
Inventory of library vlib:
in 1: volume RMAN-DEFAULT-000006, barcode fec96134fdea10285e7000c2944f637, full, content manages reuse
in 2: volume RMAN-DEFAULT-000007, barcode feef494efdea10285e7000c2944f637, full, content manages reuse
INVENTORY:
Inventory of library vlib:
in mte: vacant
in 1: volume RMAN-DEFAULT-000006, barcode fec96134fdea10285e7000c2944f637, oid 134, full, content manages reuse
in 2: volume RMAN-DEFAULT-000007, barcode feef494efdea10285e7000c2944f637, oid 136, full, content manages reuse
in dte1: vacant
in dte2: vacant
in dte3: vacant
PROBLEM:
now problem is that its waiting for input because both slots 1 and 2 are full ....my question is that it has 3 tape drives why its not using that????please can u answer............plzz
Edited by: Muhammad.Usman on Feb 17, 2010 11:48 AM -
We're running SLES 10 SP3/OES2 SP2 on a Dell server with an IBM LTO-4 tape drive and Arkeia Network Backup software. Sometimes our backups fail because the tape drive, /dev/st0, has disappeared from the system. The server may run for weeks or just days before it happens - we can't find any pattern. The only solution we've found is to reboot the server. Then /dev/st0 is visible again, and the tape drive works fine.
I've called Dell about this multiple times over the last two years. They've replaced the tape drive, and we install the latest firmwares as they become available. Dell doesn't seem to know what to do any more, figuring it's an OS issue.
Any suggestions on how to (1) troubleshoot the problem, (2) prevent it, or (3) fix the problem when it occurs without needing to reboot?jcw av wrote:
>
> We're running SLES 10 SP3/OES2 SP2 on a Dell server with an IBM LTO-4
> tape drive and Arkeia Network Backup software. Sometimes our backups
> fail because the tape drive, /dev/st0, has disappeared from the system.
> The server may run for weeks or just days before it happens - we can't
> find any pattern. The only solution we've found is to reboot the
> server. Then /dev/st0 is visible again, and the tape drive works
> fine.
>
> I've called Dell about this multiple times over the last two years.
> They've replaced the tape drive, and we install the latest firmwares as
> they become available. Dell doesn't seem to know what to do any more,
> figuring it's an OS issue.
>
> Any suggestions on how to (1) troubleshoot the problem, (2) prevent it,
> or (3) fix the problem when it occurs without needing to reboot?
>
>
Are you sure it is not an issue at the controller level. I would have looked
there right away. What kind of controller is it using. I went through a
similar issue and finally popped a different brand controller in the system
and used it and never saw the issue again. Also cables can go bad as well.
Believe I have seen that one many times.
Good Luck -
Quantum P2000 tape library showing NOBARCODE on tape drive
Hi all,
We are having a tape library of ATL quantum P2000 which is having 4 tape drives.
In which we used to daily backup.
When ever we are keeping any new cartridges into the library we will run an inventory , During this time if their is any kind of cartridge in the tape drive their wont be any issue with that particular tape drive .
If not it is showing a problem of NO BAR CODE on the operator panel of the library.
and at this time it is not detecting on the legato software also.
Kindly help me in this .....
Thanks in Advance....
SWAROOPI will use new words to repeat my first reply:
You have broken hardware.
Broken hardware doesn't work when you expect it to work.
For example:
but why my tape drive is showing no bar code error when no tape is presentHow can a broken barcode reader give you an error when you don't have anything in the library that has a barcode on it?
Go contact whoever you use for repair services and get the library repaired. -
Hi all,
i am presently running a server that has no video card. No problem to access it because a use rlogin to manage and maintain the server.
Now i need to reconfigure the server to "see" the new tape drive i installed.
One way to reconfigure the server is to use the OK prompt with the STOP-A keys. But that works only locally, not on the remote host.
Is there a way to reconfigure the server by remote access?
Thank youThanks for the info. According to the following manual (caution it's a pdf), on pdf pages 31 & 32 of 149 ( manual pages 1-19 & 1-20) it is not hooked up exactly as specified but this shouldn't be a problem.
They have the terminator on the AutoLoader. You have it on the drive.
http://sunsolve.Sun.COM/handbook_pub/Systems/L9/documents/L9_svc.pdf
The question I have is where is it connected to the E250? Did you have an HBA (Host Bus Adapter or SCSI controller) installed to support this L9. Depending on the drive installed in the L9, (DLT8000 vs DLT1) You would need the proper controller installed in one of the PCI slots in the E250. See:
http://sunsolve.Sun.COM/handbook_pub/Systems/L9/components.html
Also, if this is a DLT8000 drive in the L9 then you may want to load the latest st.conf patch to enable DLT8000 support in the /kernel/drv/st.conf file. Just search for st.conf in Free Patch Descriptions in SunSolve. Use the appropriate patch based on the Solaris version you have installed.
Maybe you are looking for
-
How to create video by recording the screen
i am new to JMF ( Java Media Framework ) i was searching for many places.. couldn't find any best tutorial to understand classes of JMF Anyways my requirement is a) Capture Screen ( full screen / selectable part of screen / a specific window in all t
-
please help me since i update my os snow leopard to os lion its seem to be nice and operation is very well ... after a month its gives trouble i cant update it and cant watch video from youtube , cant attach any files wifi is up and down with my airp
-
I have installed TomTom navigation on my ipad2 but it doesn't work?
I have installed TomTom navigation on my ipad2 but it doesn't work? Actually the application starts to find the Satelite but it never finds it,!?
-
Safari keeps crashing during launch
Safari keeps crashing during launch (home page appears but crash happens seconds later). I have run disk utility (several times) to repair permissions. I have reinstalled Safari. Preferences have been repeatedly reset. Tried the fixes from earlie
-
Putting ram in bottom slot on Wallsteet?
Can anyone tell me how to install ram in the bottom slot of a 233mhz Wallsteet PB? Also,what is the max amount of ram that can be installed in the bottom slot? I have 256mg in the top slot and 32mg in the bottom and want to put 128mg in place of the