Tape lables for old used tapes with new barcodes

Hi All,
We are having some old used tapes ,
For those tapes I have giving an new bar codes and ran an inventory form library it is fine and detected with new barcode.
But when I am running in legato then it is detecting as old volume name .
So, I have deleted the old volume and tried to labeled it with the new bar code even then also it is asking overwrite the RAW017 Volume . Like this message it is giving.
Kindly help me in this.......
Thanks in Advance..................

I think I got a solution For this ---
Just I created a new pool and I tried to label that old tape with replaced bar code into this pool.
Then it has labeled as the bar Code mentioned.
and then I relabeled into the pool in which I require that particular tape to be used .
Now that old tape with required bar code it is working fine in required pool.
Thanks for your valuable suggestions..........

Similar Messages

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • Have a old macbook 2006 with newer 500 GB seagate Momentus hard drive. I took mac to apple store and they said logic board is bad. Can I purcase another used macbook and install my old seagate hard drive and have saved my information? Thanks for any imput

    Have a old macbook 2006 with newer 500 GB seagate Momentus hard drive. I did not backup any docs or pictures. The macbook crashed my fault. I took mac to apple store and they said logic board is bad. Can I purcase another used macbook and install my old seagate hard drive and have saved all my information? Thanks for any imput.

    mgott55 wrote:
    Can I install my used existing hard drive in a compatible macbook to save everything?
    If you need to extract the drive's content you can remove it and install it in a $10 USB enclosure. It will be readable by any recent Mac.

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

  • If I completely fill my hard drive 500Gb how time machine will keep working having 1Tb of total space, I mean I have to delete mu hard drive but how I keep my previous information on time machine and keep using to with new information?

    If I completely fill my hard drive 500Gb how time machine will keep working having 1Tb of total space [externak hard drive], I mean I have to delete my hard drive but how I keep my previous information on time machine and keep using it with new information?

    Time Machine does not provide archival storage.
    If you delete a file from your disk it will eventually be deleted from your TM backup without any notice to you.
    You need a second external disk to use for archival storage.
    You also need a third disk for backups of the second disk.

  • Issue While executing the Query for Pagination using ROWNUM with like

    Issue While executing the Query for Pagination using ROWNUM with like.
    Database is Oracle11G.
    Oracle Database Table contains 8-9 lakh records
    1) SQL equal (=)
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE A.REFERENCE = 'KMF22600920'
    Execution Time:- 0.00869245 seconds
    Returns 2 resultsets
    2) SQL like (one %)
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE A.REFERENCE = 'KMF22600920%'
    Execution Time:- 0.01094301 seconds
    Returns 2 resultsets
    3) SQL like (two%)
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE A.REFERENCE like '%KMF22600920%'
    Execution Time:- 6.43989658 seconds
    Returns 2 resultsets
    In Pagination, we are using Modified version of SQL Query 3) with ROWNUM as mentioned below :-
    4) SELECT * FROM (
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) WHERE RNUM > 0
    Execution Time:- Infinite
    ResultSets:- No as execution time is infinite
    a) Instead of like if we use = in the above query it is returning the 2 resultsets (execution time 0.02699282 seconds)
    b) Instead of two % in the above query, if use one example REFERENCE like 'KMF22600920%' it is returning the 2 resultsets (execution time 0.03313019 seconds)
    Issue:- When using two % in like in the above query i.e. REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) , it is going to infinite.
    Could you please let us know what is the issue with two % used in like and rownum
    5) Modified version of Option1 query (move out the RNUM condition AND RNUM <= 20)
    SELECT * FROM (
    SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
    WHERE REFERENCE like '%KMF22600920%' ) WHERE RNUM > 0 AND RNUM <= 20
    Execution Time:- 7.41368914 seconds
    Returns 2 resultsets
    Is the above query is best optimized query which should be used for the Pagination or still can improve on this ?

    This would be easier to diagnose if there was an explain plan posted for the 'good' and 'bad' queries. Generally speaking using '%' on both sides precludes the use of any indexes.

  • Is there a way to burn old cd's with new cd's and get the same volume/quality on playback?

    is there a way to burn old cd's with new cd's and get the same volume/quality on playback?

    RIP the CD as AIFF or WAV.
    Create a playlist then burn an audio CD.

  • Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

    Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

    haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

  • Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

    Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

    D.p.middleton the Adobe Application Manager has been available for quite some time.  It not only allows Creative Cloud users to install their applications but also downloads and applies applicable updates.  In addition it is also responsible for the licensing and managing your agreement to the terms and conditions of the EULA.
    2. this could be due to you selecting a trial subscription to the Creative Cloud?  If you go to one of the Adobe Creative products and select Help>Updates it will launch the update portion of the Adobe Application Manager which I believe is the portion you are looking for?
    #3 I believe this was already mostly covered in the answer to #2.
    #4 the Adobe Application Manager also receives periodic updates which affects both perpetual and Creative Cloud subscription users.
    I hope this provides you many of the answers you are looking for?  If not please feel free to respond back with any additional inquiries which you have.  Also if you are experiencing any difficulties with the update process please post this as well.  It may not be necessary to have a full understanding of the inner workings of the Adobe Application Manager to help you resolve your difficulties.

  • Can I use old Mac Pro with new iMac?

    I have a Mac Pro (Pre 2007) running on 10.6.8 that is ok for now, but experiencing some degradation in performance. I have 4 drive bays full and memory maxed out. I am looking for a desktop solution that would allow the option to have the latest OSX (such as the latest iMac) and access this old Mac Pro still. Is this possible?
    If so, what are some of the caveats?
    SoftwareEx: CS6 is compatible with new OSX, but will files saved on new computer still be accessible on old computer?
    Access to files
    NetworkCurrently using older version of Airport Extreme for home office setup
    Any insights would be helpful! I hate the thought of this old workhorse turning into nothing more than an external hard drive, but it is not upgradable to the new operating system.

    It sounds like what you want to do is create a simple peer network so you can use the Mac Pro as a storage unit.
    This is easy to do, just connect the two with an ethernet cable and log on using the logon and password for the system you want to access. In the general case, this is a bad idea since you you have unrestricted access but you own both machines so security is a very low priority.
    Caveats:
         The OS version will determine what apps a machine can run.
         Data is just data as long as both systems use HSF+ or some other common file system.
         Airport may or may not work... but a hard wire will always get it done and transfers data a lot faster.
    You almost never get to have it ALL your way when mixing generations of systems, but if you keep it simple it works well. I've had a peer network with 4-6 systems running in my house since the turn of the century. Most Macs support 1000 baseT (gigabit ether) so data transfers up to 80-90MB/sec are easy.

  • IPhone 4: connecting to TV for the 1st time with new "Composite AV Cable" only plays sound, not video on TV. However, this new cable works fine with old iPod to play videos on TV. Suggestions?

    I'm trying to connect my iPhone 4 to my TV to play videos via use of a new "Composite AV Cable" but only sound will play off TV, not video.  I've tried every yellow/red/white input on the TV but to no avail.  Any suggestions?

    The iPhone 4, unlike iPod, doesn't ask you to set for PAL or NTSC.  In fact, in the SETTINGS/Video menu it only asks if you want to "Start Playing From Beginning", "Closed Captioning" and "Home Sharing".  I was surprised it had no settings like the iPod at all.

  • Is there a way to use ipod with new computer without erasing entire library

    I'm not really tech-savvy, but I'm tossing my old computer and getting a new one - is there a way to use my ipod on my new computer without erasing my existing library? It won't let me make changes to my ipod and wants me to erase everything that is on there right now - HELP!

    Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in iTunes enable it for disk use, this is required for most if not all the utilities listed below so they can access the files: Using your iPod as a storage drive
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    iRepo Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows Versions
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows Versions
    There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

  • I have replaced my old Mac Mini with new one.  What should I do about my Time Capsule?

    With the old Mac Mini (2009 model) I used Time Machine and a Time Capsule to back up everything on the Mac Mini itself and on external hard drive I added when I needed more storage space.  I've replaced the old Mac Mini with a 2011 model, and migrated the contents of the old one to the new one from Time Machine. 
    I'm now trying to figure out what I should do to my Time Capsule and/or Time Machine to make backups going forward of the same content, now on my new Mac Mini and same external hard drive. 
    When I go into Time Machine, it does not seem to recognise the items on the external hard drive as ones that I can backup (or not, as there were some items there that I did not and do not wish to backup to Time Capsule) through the new Mac Mini. 
    I am uncertain too whether the Time Machine/Time Capsule will recognise the items of my old Mac Mini as the same ones that are now on my new Mac Mini and save changes there, or whether it will try to save all over again all the same items, as they are now on a different computer. 
    My inclination is to clear out the contents of the Time Capsule now and start all over again.
    I have looked through information provided by Apple but not found answers to my questions.

    The situation concerning the hard drive is complicated.  It is not included in the list of Excluded Items.
    If the drive is not "Excluded", then it must be included.  That is the way that Apple's software works.
    But, nor am I given the option to select it or any of the items in it for adding to the list of Excluded Items.
    If you want to add an item to the list of Excluded items, click the + button at the bottom of the Excluded list, then navigate to select the drive to add it. Once the drive has been added, you can go back in and select the items.
    When I go into the exclude from backup area and select the hard drive, it and the items in it appear in dimmed form, but I cannot select them.
    Sorry, I do not understand what you are trying to say here.
    What I want to do, but cannot, is what I did before, select one of the items in it not to be backed up and leave the rest to be backed up
    I have no idea how you were able to do this. As long as I can remember, Time Machine will not allow you to pick and choose items on a drive to be backed up or excluded. Your option is to have the entire drive backed up, or the entire drive to not be backed up.
    have not seen the 'Quick Erase' option.
    You would use AirPort Utility to erase the Time Capsule drive. Open AirPort Utillty and click the Disks tab at the top of the screen. Then, click Erase Disk.  The Quick Erase option will appear.

  • Old Recharge Voucher with New Data Pass

    Hi Telstra, I have recently read about Telstra's new Data Pass (https://www.telstra.com.au/broadband/mobile-broadband/prepaid) for prepaid mobile broadband and it appears that it now has better value than the old plans. However, I have already purchased my $180 recharge voucher from Coles a few months ago and yet to use this recharge, and I am just wondering if I can take advantage of this new Data Pass using my old recharge. Perhaps I'm I able to go to the store, give my current recharge number and swap my $180 recharge + $10 cash with $140 Data Pass + $50 Data Pass? Or perhaps there are any other alternatives? Please let me know. Cheers!

    For anyone wondering how to do this change from the old plan to the data pass, it might be old hat news by now, but the tip is to into your Telstra account, and then "change rate plan" from within manage my or in your case, manage your account.You have to change rate plan to the new data pass.Took a few minutes for me, ... I am very happy Telstra brought in the data pass system.After you have changed your rate plan, you can then recharge with your voucher, either the $50 or the $140 ones online.Otherwise, if you don't change your rate plan, the other older rates will always appl/appear for you to recharge with it.

  • Problems Using Viber with new iPhone 4S

    When I try and use VIber with my new iPhone is says push notifications are not enabled, even though I've enabled them. I've also tried deleting and reinstalling viber several times, along with restarting the phone. Is anyone else having the same problem and does anyone have any suggestions of something else I could do?

    Hi,
    This is a member of Viber's development team.
    @libbyfromchristchurch - Please check: http://helpme.viber.com/index.php?/Knowledgebase/Article/View/38/0/push-notifica tions-for-iphone---how-to-enable
    @quyenfromseattle - This is a known issue which will be resolved shortly. Make sure that you stay current with our version updates.
    It may help to change 'banners' to 'alerts' on Viber's Push Notification settings as a temporary workaround.
    Thank you for your patience!

Maybe you are looking for