Tape List missing necessary tape

I have two separate protection groups - System State Protection Group and Default Protection Group.
We rotate between 3 separate drives - Firestreamer is used to emulate tape.
Disk 2 and 3 are currently in the library, but Disk 3 isn't assigned to the protection group "Default Protection Group", it is only assigned System State Protection.
Naturally - long term backup jobs failed and DPM is asking me to add a free tape - I can't mark Disk 3 as free because it is assigned to "System State Protection Group"
My question is - how would I go about assigning Disk 3 to both System State Protection and Default Protection Group?

I'm sorry - I misread what you said in your excel sheet.
Both tapes are showing "Offsite Ready" and is calling for a free tape. However the tape I'm wanting to use (Disk3) should be available as it hasn't backed up "Default Protection Group"
After re-reading the blog I found some insight into the issue I'm facing:
When a tape is marked offsite ready, no additional data sets will be written to that tape until ALL recovery
points expire. [The existing data on the tape I'm using, thought from a different Protection Group, doesn't expire until 11/8]
Once a tape is marked as expired, DPM will show the tape as expired in the DPM console and can overwrite the tape during subsequent backups. DPM will always favor a free tape over an expired tape when it searches for a tape to use if a new tape is
required.
So that answers my question of "Why is this happening" now I have to move to "What do I have to do to fix it?" As it stands right now - "Default Protection Group" will not get backed up all week until 11/8/14 @ 11:00PM. [This
is a weekly run job]
If "Default Protection Group" were to not get backed up this week, and resume backing up @ it's scheduled time I'm guessing that this will put it back on track, since right now the tape I'm wanting to use "Disk3" already has data written
to it from a different PG.
I apologize about the n00bish questions and confusion here - I did not have this job when this was setup and all people involved in setting this up are no longer here and not able to be contacted :|. I'm learning
as I'm going.

Similar Messages

How to get phone to list missed calls when phone i...

ive a nokia 5210. When my phone is off and i get calls i never know because when i switch it on it doesnt tell me ive missed calls. I know on my other phone which is and updated model it does list, so why doesnt the 5210.
Ive tried looking at call divert but when i try to activate divert when unanswered it wont let me
any advice

You've had a phone that lists missed calls from when the phone was switched off?
What phone, what network?
I'm pretty sure there's no way of making your phone show you missed calls unless the calls were missed when the handset was on.
About the diverting calls - where are you trying to divert to? If you're on Pay & Go some networks only allow you to divert to voicemail...
We need more info lol
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Invoice List: Missing Pricing Condition

Hi,
We are trying to implement invoice list because of the different sold-to party but same payer requirement. we have configured all the requirements listed
Prerequisites
You can only process invoice lists if the following prerequisite data is defined by your system administrator in Customizing for Sales:
    Condition type RL00 (factoring discount) must be maintained and, if required, also the condition type MW15.
    An invoice list type must be assigned to each billing type that you want to process in invoice lists. The standard version of the SAP R/3 System includes two types of invoice lists: LR for invoices and debit memos, LG for credit memos.
    Copying requirements must be defined (for example, the payer, terms of payment and other fields that must be identical in the documents to be included in the invoice list)
In addition, before you process an invoice list, you must maintain the following master data:
    A customer calendar must be defined, specifying the time intervals or dates on which invoice lists are to be processed.
    The customer calendar must be entered in the Billing Sales Area view of the customer master record.
    Pricing condition records for the condition type RL00 and, if necessary, (e.g. in Germany) the condition type MW15 must be maintained.
    Output condition records for condition types LR00 and RD01 must be created.
It successfully creates the invoice list now with net value, but, the pricing condition is missing.
What might have been the problem?
Thanks in advance for your help...

Hi,
Have you maintained the pricing condition record for RL00? Also can you please explain what have you maintained in copy control? If possible, please share the screenshot.
Thanks,
Jaydip

[Sales A/R] [Sales Report] [Open Item List] [missing item]

Dear Expoerts,
Business One 2005A:
How to restore or rectify the 'missing item' on the Open Item List?
There is an item shows Commiited 10 however there is no corresponding Sales Orde.
Since there is no stock therefore data shows Available -10.
How can we purge this bug because we tried Goods Issue and Restore, neither methods can do anything about it.
Your advice will be very much appreciated.
Kunitomo
Tokyo, Japan

Dear Gordon,
Yes, i'm sure. When i test it, i copy Sales Order (eg. got 5 items - 4 of 5 item is 0 amt) to Delivery Order (got 5 items - 4 of 5 items is 0 amt). Then i delete the row of 4th & 5th item with 0 amt.
FROM Sales order:
Example: 1) Item A      $1,000.00
               2) Item B              $0.00
               3) Item C              $0.00
               4) Item D              $0.00
               5) Item E              $0.00
To Delivery Note:
Example: 1) Item A      $1,000.00
               2) Item B              $0.00
               3) Item C              $0.00
               4) Item D              $0.00 (Delete row in Delivery Order)
               5) Item E              $0.00 (Delete row in Delivery Order)
After i check the Open Item List - the amt, net & tax do not show the figure for this Sales Order. The Sales order just show $1,000.00 in "Original Amount" in Open Item List.
Please check for me, the SAP B1 system std is like that?
Thank you.
Regards,
Sheon

Why are some of the icons in my Bookmarks list missing after 8.0 update

I installed the 8.0 update a few days ago, and when I opened my Bookmarks lists some of the icons associated with the various websites are missing. Is there a way to correct this problem?

I don't know how many photos you're trying to post on one page but if you put too many PCs using Internet Explorer may have problems loading the page. I prefer to keep the number down to less than 50 and have more than one page which will be indicated by the page links at the top of the thumbnails:
These smaller pages will load faster and in more browsers.
OT

Open Items List- Missing Items

Dear all,
In the open items list there is an option in drop down for missing items. When we select the option some items and its details get listed. What is the information being communicated by this selection?
Thanks in advance

Hi!
Select the option Missing Items to display a list of all items with available quantity lower than zero.

List missing fonts in Illustrator

Hi all,
I've been working on a script to try and build a list of font's that not loaded in Illustrator. I know that Illustrator will alert missing fonts when a document is opened but this routine will be part of a larger script that will have the user dialogs turned off. My process is to build a list of fonts that are available to the the application, then build a list of fonts that are used within the active document and cross reference them to see if there are document fonts that are not in the application fonts list.
I have used a great function that I believe was posted originally by Moluapple and with some some brilliant advice from the always helpful CarlosCanto I thought that I had found the soultion but it appears to have some limitations. If I get a list of fonts available to the application and the document that I want to cross reference them against is open, the list that's returned contains fonts that are used in the document. Then when I get a list of fonts used in the document and cross reference them they will all be in the application list regardless of whether they're loaded or not.
The only way that I can get accurate results are if I run the script without any documents open and build a list of application fonts, then open a document and build a list of document fonts and then cross reference. This is the only way I can find out what fonts aren't loaded.
Does anybody know of another way to build a list of missing fonts without having to close documents first? I have searched through the XMP data and this doesn't seem to give me any clues and I've tried writing the code in applescript but it appears to work in the same way. Any help or comments would be welcome.
Here's my code:
#target illustrator
var doclist = app.textFonts
var appFontList = new Array ();
for (i=0;i< app.textFonts.length; i++){
    var fontName = app.textFonts[i].name;
    appFontList[i] = fontName;
var myfile = File.openDialog ('Choose a file');
app.open (myfile);
var docFontsList = getUsedFonts(activeDocument);
// function accredited to Moluapple
function getUsedFonts (doc ){
     var xmlString = new XML(doc.XMPString);
     fontsInfo = xmlString.descendants("stFnt:fontName");
     var ln = fontsInfo.length(), arr = [];
     for (var i = 0; i<ln; i++){arr.push(fontsInfo[i])};
     return arr;
var missingFontsList = checkFonts();
alert(missingFontsList);
function checkFonts(){
    var fontArray = new Array ();
    for (i=0; i < docFontsList.length; i++){
        var thisDocFont = docFontsList[i];
        var activeFont = false;
        for (j = 0; j < appFontList.length; j++){
            var thisAppFont = appFontList[j];
            if (thisDocFont == thisAppFont){
                activeFont = true;
        if (activeFont == false){
            fontArray.push (thisDocFont);
    return fontArray;
Many Thanks,
Nik

Mark,
you are a legend!!!!
with yours and Carlos' help I think I have raged against the system that is Adobe and come out victorious!!!!!!!!
I Finally have a script that doesn't tell me lies.
Building a list of fonts that are available from InDesign, then building a list of fonts that the active Illustrator document is using and comparing the 2 lists I've managed to locate the fonts that aren't active. I'm sure the script could have some fine tuning but hopefully it might help others who just want to know if fonts are missing before creating a PDF that contains false font information.
Thanks again all,
Nik
#target illustrator
var docFontsList = getUsedFonts(activeDocument);
// function accredited to Moluapple
function getUsedFonts (doc ){
     var xmlString = new XML(doc.XMPString);
     fontsInfo = xmlString.descendants("stFnt:fontName");
     var ln = fontsInfo.length(), arr = [];
     for (var i = 0; i<ln; i++){arr.push(fontsInfo[i])};
     return arr;
//////////////////////////////////////////get a list of available fonts using Indesign///////////////////////////////////
var bt = new BridgeTalk;
bt.target = "indesign";
var msg = "app.updateFonts();var fonts = app.fonts.everyItem().postscriptName;obj = fonts.toSource();"
bt.body = msg;
bt.onResult = function(resObj) {
    eval("var idFontlist = " + resObj.body);
    doSomethingElse(idFontlist);
bt.send();
function doSomethingElse(idFontlist) {
    appFontList = idFontlist;
var missingFontsList = checkFonts();
if(missingFontsList.length > 0){
    alert("List of missing fonts:\n" + missingFontsList.join( '\r' ));
else{
    alert("There're no missing fonts!");
function checkFonts(){
    var fontArray = new Array ();
    for (i=0; i < docFontsList.length; i++){
        var thisDocFont = docFontsList[i];
        var activeFont = false;
for (j = 0; j < appFontList.length; j++){
            var thisAppFont = appFontList[j];
            if (thisDocFont == thisAppFont){
                activeFont = true;
        if (activeFont == false){
            fontArray.push (thisDocFont);
    return fontArray;

Supplier Mgmt 'To Do List' Missing in 12.2.4

The Supplier management page does not show the ‘To Do List’ for reviewing and approving Supplier Registration and changes. This was previously in 12.2.3, but disappeared when we moved up to 12.2.4.

Srikanth,
Did you apply all pre-req. patches before applying 12.0.6 RUP patch?
What is the status of this patch? Does it fail or run or those are just warning messages?
Note: 743368.1 - Oracle E-Business Suite Release Update Pack Readme, Release 12.0.6
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=743368.1
I would suggest you run adadmin, and check for missing files before you proceed with the patch installation.

Assortment list: Missing data values & structure modification

Hello all,
I have the following problem:
1. I'm using the assortment list (not HPR version) with the structure WBBP_MAX to download data to the local system that is connected to a POS system. I know that this structure is a really massive one, but I'm planning to reduce it (see my number 2 question). The TC I'm using is WDBI\WDBM. Release version ECC6.
When I'm executing the assortment list initialization\manual I have a missing values problem when displaying the AL for example: the purchasing prices (E1WBB08 - KWERT) appears in the generated Idoc (basic type WBBDLD04) but when I'm displaying the created assortment list, the values for the sales price do not appear . In additional, in the SAP Retail store, the sales price appear for the article overview option but in the store order\assortment list option the price do no appear.
2. I want to create my own structure as a copy of structure WBBP_MAX. I've copied the structure and started mapping the fields I needed. My question is - is it enough to change the structure and assign the new structure to my AL profile or do I have to modify the RWDBBI_ALV program?
Regards,
Mikio

This code works. How does your code differ in significant ways?
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
    <![CDATA[
      import mx.collections.ArrayCollection;
      [Bindable] private var ac:ArrayCollection = new ArrayCollection([
        {id: 1, label: "test1"},
        {id: 20, label: "test20"},
        {id: 3, label: "test3"},
        {id: 40, label: "test40"}
    ]]>
</mx:Script>
<mx:List dataProvider="{ac}">
    <mx:itemRenderer>
      <mx:Component>
        <mx:HBox>
          <mx:Label text="{data.id}"/>
          <mx:Label text="{data.label}"/>
        </mx:HBox>
      </mx:Component>
    </mx:itemRenderer>
</mx:List>
</mx:Application>
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

List missing some ID values

I have a list that I populate from a data provider. data provider is an arraycollection of an object A whose fields are id, name, date etc. I bind the data to the list. Everything looks fine but the weird thing is that some of the id fields are left blank. and these are usually in the multiples of 10. for example, i am missing id for the 10, 20, 30, 40 and so on....
this is very bizarre situation that i am facing. when i debug my code, i see all the id fields been populated from the backend service properly. any suggestion or idea would be highly appreciated. Thanks.

This code works. How does your code differ in significant ways?
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
    <![CDATA[
      import mx.collections.ArrayCollection;
      [Bindable] private var ac:ArrayCollection = new ArrayCollection([
        {id: 1, label: "test1"},
        {id: 20, label: "test20"},
        {id: 3, label: "test3"},
        {id: 40, label: "test40"}
    ]]>
</mx:Script>
<mx:List dataProvider="{ac}">
    <mx:itemRenderer>
      <mx:Component>
        <mx:HBox>
          <mx:Label text="{data.id}"/>
          <mx:Label text="{data.label}"/>
        </mx:HBox>
      </mx:Component>
    </mx:itemRenderer>
</mx:List>
</mx:Application>
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

Pick List: Missing part

Hello Experts,
In our plant we release the Production order even though there is missing part. The pick list contains all the components.
Is there a way to indicate in the pick list if the part is missing?
Regards
Tom

I am sorry if I was not clear.
I want the pick list to be generated even though there is missing part. But in the pick list that is getting printed, I want the missing part to be mentioned as missing part.
Regards
Tom

ALV List Missing Status Menu (Sorting, choose layout etc)

Hi,
I developed a report with ALV List display. When I display the ALV List, why my status menu (normally contains sorting, export to local, choose layout and other buttons) that will appear on top of the ALV report is missing?
I try to look for the ALV Function Module parameters, but seems non of it related.
I developed my previous report, it do have the menu there. Just this new report is missing.
Can someone tell me where to set or code?
Thanks.

Hi Irene,
Please check your pf_status_set routine if you use FM REUSE_ALV_GRID_DISPLAY.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = sy-repid
      i_callback_pf_status_set = 'PF_STATUS_SET'
      i_callback_user_command = user_command
      i_buffer_active          = space
      i_bypassing_buffer       = 'X'
      is_layout                = er_layout
      it_fieldcat              = er_fieldcat[]
      it_special_groups        = er_sp_group
      i_save                   = 'A'
      is_variant               = e_variant
      it_events                = er_events[]
    TABLES
      t_outtab                 = outtab.
* FORM pf_status_set
FORM pf_status_set USING rt_extab TYPE slis_t_extab.
DATA: rt_extabw TYPE slis_extab.
SET PF-STATUS 'STANDARD' EXCLUDING rt_extab.
SET TITLEBAR 'STANDARD'.
ENDFORM.                    "pf_status_set

Device list missing

Hello Everyone!
I have some trouble with my finder sidebar. Somehow the device list is missing, but it is not the regular soution in preferences....
So who's got an idea whats going on here...

Hi slb1827,
Welcome to the Support Communities!
These articles should help you with iTunes for Windows:
iTunes: How to install the latest version
http://support.apple.com/kb/ht5654
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Cheers,
- Judy

Outlook 2013 contacts list missing

When I look down my contact list contacts are missing, I do a search and they are there but not on my contacts list? I am unable to add them, gives me a message this contact already exsits.
Thanks.

Hey Remwhirl,
It sounds like you may have inadvertantly filtered your contacts. Try the following:
Open your contacts folder
Click the View tab on the file bar
Click Reset Current View
This will remove any filters that were applied.

FieldPoint error codes list missing

Hi everybody,
   Here
       http://zone.ni.com/reference/en-XX/help/371361A-01/lverror/error_code_ranges/
   you can find a list of LabVIEW error codes; in the list, the FieldPoint error code section is missing.
   Opening Extended Optomux VIs, opening SerialHandler (VISA).vi, I reached a point containing error codes, which ranges from 32896 to 33026 (or something like that......).
   On Field Point Programmer reference, optomux errors goes from 00 to 8C.
   What am I getting in "error code" field of error out
terminal of extended optomux VIs? Is there a list with complete
errors?
   More: what is the link between Status word (the one
obtained from "Write discrete with status") and error codes? Is it
simply "1" when some error is detected?
   It's quite important to have a deep knowledge of errors when you build an embedded critical application.....
   Thank you for helping me!
graziano.

Hi AlessioD,
    If you expand all the sub-VIs, starting from, say, (!J)Read Discrete (VISA).vi, that is an optomux VI, you'll reach Serial Handler (VISA).vi. There you find the error generation. The numbers assigned to errors seems not to be like constants defined in FP-1000 Programmer Reference Manual.
   In FP-1000 Programmer Reference Manual, for example, E_PUCLR_EXP error (power up clear expected error) has an Error Number (Hex) 00 (page 2-2).
   In the picture below, it seems that a Power up clear error has an error 32896 (resembles much a VISA error code...).
    Is there an utility to get Optomux error codes from General errors? I mean, errors reported from optomux VIs.
   Thanks!
graziano
Attachments:
forum_0.JPG ‏132 KB
optomux VI_1.JPG ‏7 KB

Tape List missing necessary tape

Similar Messages

Maybe you are looking for