Tape to Flash Freelancer Wanted

Hi. I have DV video tapes (recorded using a nice Canon
camera) that I'd like to have converted into flash for presentation
on a website. I'd like to find someone who I can give the tapes to,
along with a short note on what scene on the tape to convert to
flash. Usually I need a 4-5 minute scene edited down to a 2-3
minute movie. It's educational-type material. I had someone helping
me with this already, for the last year, but he's taken on a bigger
project and can no longer deal with my small movie jobs on the
side. My existing developer would do about 4 movies per month for
me and I was paying him about $150 each. I can bundle the jobs into
one bigger batch in order to have 20 of them done at once, if you'd
prefer. I can show you samples of what's already been created. I'd
like to find someone in the Bellevue or Seattle. If you know of
anyone around here please pass this along to them, and if you're in
the local area please feel free to email [email protected]
along with some samples of your work. Thanks a lot.

If i may suggest Toast is a must for a Mac. It worths every penny of it.
(i dont work for Roxio)
Toast can create a "disc image" of your DVD on your HD.
If this procedure succeeds you can conclude your DVD is not damaged.
Only IF this is done , you may then try burning on blanks, reducing wasting blanks. At least you have saved your treasure.
The "disc image" on your HD can be "MOUNTED" by Toast anytime for you to view on your Mac.
Using DVD copier service is expensive. Use your money to buy Toast.
I believe a Mac without a Toast is like a penthouse without a bathroom

Similar Messages

I have a mac computer. I am trying to install flash player but get the message "install adobe flash player wants to make changes. Type your password to allow this." I do not use a password to open the computer.

I have a mac computer that uses no password. When installing flash player I get the message "Install adobe flash player wants to make changes Type your password to allow this. I can't get past this message.

Hi,
To change your password you will need to open System Preferences, then open Users & Groups, click on Change Password. Change your password to a temporary one, then when you have finished you do the same procedure to change it back, by typing in the temp password then leaving the new password blank. Hope this helps.

Every time i go to a site or and extension of a site i use a lot it asks me if it can you adobe flash I want to know how to make it so it just allows all site

Every time i go to a site or and extension of a site i use a lot it asks me if it can you adobe flash I want to know how to make it so it just allows all site to just start it. I only go to mainstream sites so its not a security issue. I have gone into the adobe settings in my control panel and allow sites to store info on my PC so any other suggestions? thank you to anyone who can help.

Have you tried the Reset Safari... in the pull down menu under Safari?
Allan

Freelance Flash Designers Wanted

Hi we got inquiries for Freelance Flash desingers. Please register and complete your profile at https://www.lokujobs.com/
You could visit our facebook page for further details https://www.facebook.com/lokujobs

If you need some programming help, we have a hundreds of freelance
experts ready to help:
http://www.ifreelance.com/find/providers/browse.aspx?ba=1&c=12
Or, if you are a programmer, please join our site to begin offering
your service to buyers in need of your expertise:
http://www.ifreelance.com

Flash designer wanted for immediate & future site projects

Greetings...my name is Chad Dyer, owner of Naturally Wired
Designs in Minneapolis. We have provide website design and
webmaster services to clients such as Billy Idol, Black Label
Society, George Lynch, members of Korn, Shania Twain, Jessica
Simpson, Kelly Clarkson and others.
We currently have 1 flash designer on staff and I need to
bring on a freelancer for an immediate project in the car
customization industry, as well as future projects in 2009.
If you are well versed in flash and are fully competent
taking PSD files and converting them into flash sites, please
contact me at [email protected] or contact me directly at
320-309-3795 to discuss this immediate opportunity. Starting pay is
between $20 and $30 per hour depending on your talent.
Thank you!
Chad Dyer
Naturally Wired Designs LLC
1643 Goettens Way
Saint Cloud, MN 56301
320-309-3795
[email protected]

I can help you with this, but I would prefer bidding on the
projects instead of trying to work within your hourly rates. The
website URL below is all my work, design, flash, video etc. I have
more Flash website examples if you want to see them and I have won
awards from Adobe for my Flash work. I like to do Fun, crazy and
off the wall stuff, no boring coporate stuff.
Thank you,
Peter Roesler owner of a
Web Design and Development
Company

NON-Flash User Wants to Edit and "Recompile" an SWF or FLA file...help??

Hello!! Although I am NOT new to Mac, I have NEVER attempted to edit an SWF file and I'm seeking an EASY way to do so. I think I might be CLOSE but I'm wasting time trying to figure it out so I'm posting here for some help...hopefully!! :-))
I also apologize because I did NOT know where to post this question so KINDLY direct me if I have posted in the wrong place!
Soooo, I have an complete, original .swf flash movie. It is a Holiday greeting but the VERY LAST frame has text that is NOT RELEVANT and I wish to change that text.
It appears that the text I want to change is (I do NOT know the correct term) a "layer" of graphic content for the last frame.
So, I have done TWO THINGS: I have used the Flash Decompiler app to (1) create an .fla file and (2) DECOMPILED the entire .swf extracting ALL the resources/objects that are used to create the original .swf animation. I have NO IDEA what to do with the .fla file...I know it is used to edit the animation but I do not have software to manipulate the file.
BUT, in the decompiled files, I HAVE LOCATED the one resource...a TEXT RESOURCE...that I wish to change. This extracted text resource is named "Dynamic text 293.swf", saved as in .swf format.
Now HERE is where I am STUCK!!...and I THINK this is the direction I would like to go:
1. Open the Dynamic text 293.swf file in a format that allows me to EDIT THE TEXT I wish to change. HOW DO I DO THAT?? Can I convert it to a jpeg, edit the text, and then BACK to an .swf file?? Can I simply CREATE a JPEG and somehow SAVE IT as an .swf file to REPLACE the Dynamic text 293.swf file? Is there an EASIER/DIFFERENT way to edit the text in this Dynamic text 293.swf file?
2. After editing the text in the Dynamic text 293.swf file, HOW DO I "RECOMPILE" the folder of alllll the extracted resources from the original .swf animation, NOW with this NEW/EDITED Dynamic text 293.swf file, and RECREATE the full .swf with the changes I made??
Again, I do NOT have FLASH or MACROMEDIA or any of those apps :-/ I DO have the .fla file conversion AND have isolated the SINGLE extracted resource file (Dynamic text 293.swf) that I want to edit.
THANK YOU TO EVERYONE FOR YOUR HELP Greatly appreciated!!
Scott

That's a problem, since the format changes between jpg and swf when converted
probably won't just go back to their previous state, less the changed section.
The converter you have, is it a freeware to convert swf to fla; or what does it say
that it can do? In some cases, a flash video can be copied (perhaps illegally)
through use of a software such as Ambrosia's SnapZ ProX and a movie of any-
thing playing on your Mac can be copied. So, a movie could be paused at the
end where the unwanted content exists, so the copy would not have it recorded.
Snapz ProX - Ambrosia Software: (not freeware, has 'free trial' version)
http://www.ambrosiasw.com/utilities/snapzprox/
Otherwise, there are a few shareware and freeware editors for swf content; to
some degree or another they either convert content or allow some editing.
And this may only work as far as the item's creator allowed, if the file is locked.
' swf fla freeware editor Mac OS X ' - google search:
http://www.google.com/search?hl=en&q=swffla+freeware+editor+Mac+OS+X&btnG=GoogleSearch&aq=f&oq=
I'd tried some basic editing of swf files a few years ago, and was able to only
convert the string of images into single-frame jpgs and work on each one,
but could not get them back into an swf. Perhaps graphic converter or other
software could do something for these; but I am inexperienced in all that.
Good luck & happy computing!

Flash Player wants to be updated all the time

I am running FireFox 3.6.9, and have upgdated Flashplayer to 10.1 r53 (the latest) I keep getting notified when checking my plugin updates that Flash wants to be updated and is vulnerable with more info message of
This Plugin version has a security vulnerability etc.
Is this just a glitch or should I just give up with flash player, it seems to work fine but if it has a security problem I will just give it a miss as I have had enough security problems with other programs and do not need any with this.
Can anyone advise what I should do with this?

Hi lasaboy Glad you received a reply from Firefox. I had not heard they were updating with the previous version of Flash Player. The previous versions of Flash Player must always be Uninstalled however. I'll check that info out.
Thanks for sharing, as many users are having problems with Firefox and Flash Player 10.1.
Regards,
eidnolb

Flash newbie wants to know how to open a new browser

Hello all! I'm a flash newbie who needs some help!
I am building a flash website. To navigate within the site, i
made buttons which use the "gotoandStop" behavior which takes the
user to certain frames within the my Flash file timeline. However,
I want this to happen in a new browser window for the user, like a
popup.
How do I do this?
THANKS in advance, and I hope someone can help!!!

Oh, someone just told me....hit the space bar.

WHen Adobe flash player wants to store data firefox will not let me respond tothe dialog box?/fiadobe flash player settings dialog boxes not reponding

After I installed Adobe Flash 14.0.0.0.25 when I access a site that wants to store data locally, I am presented with a dialog box that gives me options: allow, deny, specify the isite. However, regardless of what I click nothing happens. it is almost like Firefox doesn't "see" the click. I went into Adobe settings manage and added the site as trusted, but that did nothing...

Best is to allow Flash local storage globally and use the defaults.
See also:
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Global Storage Settings Panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

Small project - Freelancer wanted (Netherlands - Brooks flowmeter)

We are looking for a freelancer (or just someone with some knowledge) for a small labview project for our company;
PanTerra Geoconsultants B.V.
Laboratory Services
Weversbaan 1-3
2352 BZ, Leiderdorp
Netherlands
We are a small company in the oil and gas industry and recently bought a Brooks mass flowmeter. We still have an analogue board from a earlier (failed) project and now want to hook up a pressure transducer (10 V input - 100 mV output) and the Brooks flowmeter (Digital IO - Visa) together and store all data points in a datafile. Nothing special for people who know there way in Labview i think.
There is a thread somewhere with a reply from "Albert Geven" where he attached some small files which can readout the mass flowmeter by using the HART protocol, but we couldn't get it to work as we have no labview experience what so ever. (Albert if you read this tread, please contact us as i tried to contact you)
Contact details; p.steenbergen(at)panterra.nl
Kind regards,
Peter Steenbergen
EDIT: If succesfull, maybe more and bigger projects can be the follow up.
Message Edited by PeterSteenbergen on 07-23-2007 07:01 AM

hello Panterra,
Myself Vishal Solanki ,Pune Resident, Labview Developer, Pune University.Embedded,C.C++.,labview .
I would like to freelance your project,
please forward details for this labview project for your company and email ID.
Currently working:Tata Institute of Fundamental Research,Mumbai.
                          .Homi Bhaha road, Colaba.Mumbai
                          [email protected]
                          wk: 91-22-22782483
                          Res:91-20-24451126
                          Mob:9970679397
Post: Research Fellow
: Astronomical satellite Project. Design & development, software tools, program for Data acquicistion, graphical data analysis and reduction techniques
(Using Labview 8.0, C, C++).NI DAQ 653X card.NI Hardaware patforms cRIO Embedded Controller System(910X), Installataion, ConfigurationAnalog/digital Modules and integration with custom Software
Total work experience : 1.5yrs

Don't want to use flash. Want it like so...

Hello. I am trying to add a .mov file and a .wmv file to my
website. I don't want to use flash because I like it better when
its done like it is on this site:
www.wintersoldierfilm.com (go to "view trailer" for the
example)
Can anyone give me instructions on what I need to do in order
to have my videos appear exactly the way they do on that site?
Thanks in advance. I know this is probably a long one.

"Osgood" <[email protected]> wrote in
message
news:edgm2n$rrd$[email protected]..
> Martin wrote:
>
>>>The answer is in the code:
>>>
>>>Windows Media Player:
>>>
>>><td bgcolor="#FFFFFF" align="center"
valign="middle"><embed
>>>src="images/winter_soldier_trailer.wmv"
width="320" height="255"
>>>align="top" border="0" loop=false autoplay=true
controller=true
>>>pluginspage="
http://www.apple.com/quicktime/"
kioskmode="true"></embed>
>>></td>
>>>
>>>
>>>
>>
>> Surely that's an error - Quicktime cannot play
Windows Media Video i'm
>> sure.
>> The pluginspage pointing to apple.com would be no
good if the person
>> trying to view the WMV video didn't have the
required codecs installed?
>
> I don't know. Both played ok for me on a Mac. Im not
aware that I have any
> additional codec installed to handle one or the other. I
just have real
> player and windows media player.
>
Thinking about Windows Media Player i think the flawed code
would not
matter - Windows Media Player will generally (automatically)
contact
Microsoft to look for any codecs that are required but not
installed.
Martin.

Any Flash Designers want a small project?

I need someone to design a flash menu that I can customize. I
will
provide the artwork, but I must be able to add or remove
menu buttons.
I should also be able to add a sound if wanted. (A small wav
file
or whatever format is best)
This menu will be for a guy named Webb. There will be a
small
cobweb in the upper left top corner of the webpage. (This
does not
have to be part of the flash annimation, but it can be if
it\'s
easier.)
When the page is opened, a custom-artwork spider drops from
the web
to a position just below the last menu button, and hangs
there
bouncing slightly at the end of his web-line. (artwork for
spider
and buttons will be provided)
The menu buttons will be rectangular buttons with a cobweb
design.
They will be placed in a margin far enough from the left
hand edge
for the spider to drop down beside it without covering the
entire
button.
When you hover over one of the buttons, the spider graphic
should
move back up the web-line to a position directly beside and
to the
left, partially covering the button, while the button
flashes or
bulges or reacts in some way until you click it. Once the
new page
opens, the spider makes it\'s way back to it\'s resting spot
under
the lowest menu button.
The spider image, which is the company logo is located here:
http://rewindshow.com/LogoBig.ai
It is a vector graphic created in Adobe Illustrator.
Please contact me if this is a project you can take on.
My email is [email protected]
My phone is 978-790-1367

Yes,
You can use GeeThree's Slick volumes Volume 6 has the option of hilite obscure that even moves with your video. You can preview all of the Slick effects on the website.
You also might want to look at cf/x's imovie plugins and use their 'pixelate' option that can pixelate the whole clip or just part of it.
If you nude character is moving, GeeThree's option might be better, but cf/x is less expensive if you only need the one effect.

I got another way to convert c/c++ to flash, anyone want to have a try?

I just use MS Visual Studio c++, not the gcc. to compile. And then convert the PE(portable executable file) to flash as. I have converted some projects that I write successfully. Is there anyone want to have a try?

The tool is called "c2flash", and can be download here
http://www.voicing.cn/product/anytoany/

Flash keeps wanting to map fonts with "Font Mapping" dialog box

Every time I open a CS4 Flasf FLA file I am prompted with the Font Mapping dialog box.
Even though I select the substitute fonts, every time it asks for it -- even after SAVE ASing the file under another name.
How can I get Flash CS4 to remember the fonts I have substituted?
Thanks,
...Rowby

I don't have CS4, but if it hasn't changed since CS3, if you read the warning that opens that font mapping you will probably see that it does not save the substituted fonts in the file. To get the fonts truly substituted you need to find the intances that use the fonts (shown in parentheses when missing) and select the new font.

I am unable to update Adobe Flash and want it activated.Thanks

I have tried multiple times to update Adobe Flash which was deactivated by Firefox. and have been unsuccessful.Need this system to view many of my e-mails/websites.Could you activate for me?

What is the problem you are getting when you try to update Flash? Try the download from https://get.adobe.com/flashplayer/download/?installer=FP_16_for_Firefox_-_NPAPI&standalone=1

Tape to Flash Freelancer Wanted

Similar Messages

Maybe you are looking for