Tapes with (Imported) in the label

Every once in a while, my DPM 2010 tape labels appear as "Imported." I have only used this one DPM server and it has always been DPM 2010, so no version/system migrations. One dat the tape will labeled normally and the next, it seems like DPM
forgot about the tape. Often times when I attempt to view the contents of the tapes, I am forced to recatalog the tape. The tapes and jobs on the tapes are nowhere close to being expired.
This is a HUGE problem when I need to restore an Exchange mailbox from a tape, as individual mailboxes can not be restored from "Imported" tapes.
Any assistance would be greatly appreciated.

I have something similar happening in my DPM 2012 SP1.
Few days ago we finally got a tape library that is capable to read barcodes, so we added barcodes to all our tapes and today we put some tapes in the library for reading the barcodes and assigning the OMID to barcodes.
At first step I had a "suspect" tape due to the misalignment between OMID and Barcode. We fixed that on the DB.
Another issue is that, after the inventory, we have the (imported) in the label.
Why?
I didn't import those tapes, these are the same tapes that the same server has written few days ago. Why are they rcognized as (imported) ?

Similar Messages

How to create a SelectItem with image before the label text?

How to create SelectItems with image before the label text for selectMulitpleChoice, selectOneChoice, selectOrderShutltle, etc?

you have to create a custom selectoechoice for this.. to have an image next to the seelct items..
as mentioned above..
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/55-selectonechoicewithimages-170420.pdf

Difference EMEI on Screen with EMEI on the Label

Hi Guys
anyone can Help Me
I already have Blackberry device with difference EMEI on Screen with EMEI on the Label
how to solve this problem,Can I replace it with an official from RIM Emei?
Can I get a PIN and an official Emei?
please help for this problem
thanks
regards

It may take more that one try to enter recovery mode.
But I'm afraid that you'll have to get it checked by visiting an Authorized Apple Service Provider or Apple Store. Without a working sleep button, the phone can't be restarted.
As mentioned before, your phone might be eligible for the sleep button replacement program:
https://ssl.apple.com/support/iphone5-sleepwakebutton/

Changing the label of Next button in af:trainButtonBar

Hi,
I have a bounded task flow that contains 5 train stops.
In each step, I’m using the train button component to show the back and next buttons.
In the third train stop, I need to change the label of the next button to something else (read from a resource bundle if possible) but I need to do it only for this taskflow and for this step only.
I found that I can do this with the skinning, but this will change it for the whole application no? but I need to do it for this task flow only
Any hints how can i change the label?
Thank you

Hi,
The task flow I’m implementing is a simple task flow where the user navigates through all the stops. No stop is skipped. So the af:trainButtonBar is very suitable for my case. The only modification I need is to change the text label of the next button from “next” to “a string read from a resource bundle”.
In the example in the link, we are using command buttons but what I need is to stick to af:trainButtonBar with just changing the label.
Thank you again

What's the label mean in Mac mini?

My Mac mini labeled as "MAC MINI 1.83/2X512/80/COMBO/AP/BT-TWN EMC No: 2108
FCC ID : BCGA1114 IC: 579C-A1114 FCC ID : PPD-AR5BXB6-M IC: 4104A-AR5BXB6"
My questions are:
1. If I bought a new Mac mini with 4GB memory, would this label changed too?
2. the first line "....../COMBO/AP/BT-TWN..." seem to mean Taiwan area, and it has another small label on the same side near says Made in China(Chinese words). I wonder if it labeled -USA in the first line as you bought Mac mini in US?
3. If so, TWN = Taiwan; USA = US, then, is it Made in China too?
4. If I live in Taiwan, will there be any problem if I bought a Mac mini from US and using it in Taiwan? like software conflict? or anything I need to beware?
PS. I prefer to use English Mac OS X.
Message was edited by: Mauricette

1. If I bought a new Mac mini with 4GB memory, would this label changed too?
The label contains a brief outline of the system's original configuration, so if you bought a new mini with 4Gb RAM, the label would change as appropriate to that system.
2. the first line "....../COMBO/AP/BT-TWN..." seem to mean Taiwan area, and it has another small label on the same side near says Made in China(Chinese words). I wonder if it labeled -USA in the first line as you bought Mac mini in US?
3. If so, TWN = Taiwan; USA = US, then, is it Made in China too?
I'm not sure you're reading the label correctly. If I recall correctly, all minis are built in China, though obviously they are localized for different markets.
4. If I live in Taiwan, will there be any problem if I bought a Mac mini from US and using it in Taiwan? like software conflict? or anything I need to beware?
Minis come supplied with a universal power supply, so as long as you have an adapter that allows you to connect the US power plug to the socket you have on the wall, there is nothing else needed. There are no software conflicts you'd get as a result, and the process of initially setting up the system when it is unpacked will allow you to select whichever language you prefer.

Importing tape into Imovie 11. How do I import all the clips as one long clip?

How do I import all the clips as one long clip? I have 45 min of footage and I want it as one long take I can edit in Final Cut ProX. When I import, all the clips are split up when the scene cuts. I just want the 45 min in one long video.

iMovie will import the tape as if it is direct from the camera. It will sense the scene breaks and put all the clips in chronological order.
If you want to import it as one long clip, I suggest you load the tape into the app that you edited the tape with. Then export it out as a QuickTime movie in the DV codec. You can import this MOV file into FCPX or iMovie.

I received a $25 iTunes gift card when cashing in my Air Miles points and when removing the label on the back or the card (which had tape over top of it) there is a number missing from the 16 digit number. What do I do?

I received a $ 25 iTunes gift card - when I cashed in some air miles points. Unfortunately the label on the back was covered in tape and when I tried to remove the tape and the label I found that there were only 15 numbers out of the sixteen. How can I find out what the number/letter is that is missing? If I provide you with the GCA # will that help?
Please get back to me,

Consult this handy guide: iTunes Store: Invalid, inactive, or illegible codes

Advice on importing old mini dv tapes with timecode breaks

I've dug out mini DV tapes from storage which contain priceless (at least to me) family footage. Some of these tapes are close to 11 years old.
Before these tapes degrade and rot further, I'm trying to generate tape archive files on my hard drive using Final Cut Pro 10.1 from these old tapes.
The issue I'm having is with timecode breaks on some of the tapes. After a few minutes of an import, sometimes the video will go a little wonky and I'll get a timecode break and the import process aborts itself. When this happens, I'm forced to start the archive all over again from the beginning, as far as I can tell. If I get lucky, sometimes I'll get through the import after another try but other times the tape is so badly damaged that I can't get through the entire tape.
I believe there used to be a setting to tell Final Cut Pro to ignore these breaks. It now appears this setting is gone. Or am I missing something? If it's gone, is there some kind of workaround I can employ?
Otherwise, if Final Cut Pro isn't up to the task, can someone please recommend software that will help me convert my tapes to archives on my hard drive?
PS. I've used a head cleaning tape on my camera to limit the problem but it still happens with some of the tapes.

You need a DV device to be attached and recognized by your Mac.
Open QTime X.
File>New Movie Recording.
In the control bar click the small triangle.
A list of devices appears to record from.
Make the DV/camera selection and start capturing.
It's all manual start stop and very basic but does capture.
Al

Is ti possible to label a set of tape with a specific media family. For eg. I want media family'xyz' to use tape only from location '1-6'. Is this possible in OSB

-Is it possible to label a set of tape with a specific media family. For eg. I want mediafamily 'abc' to use tape only from location '1-6' and media family 'xyz' to use tapes from location '7-12'. Is this possible in OSB.
-If not through media family, is there any other way to label tapes with customized lablels.
-Is it possible for a backup job to use the tapes from a set of tapes and backup should fail if the tapes are not found from the set. Even if the library has empty tapes.
I have read about Volume set, but I believe its something that is created automatically when the backup spans to the next volume after current volume is full.

-Is it possible to label a set of tape with a specific media family. For eg. I want mediafamily 'abc' to use tape only from location '1-6' and media family 'xyz' to use tapes from location '7-12'. Is this possible in OSB.
-If not through media family, is there any other way to label tapes with customized lablels.
-Is it possible for a backup job to use the tapes from a set of tapes and backup should fail if the tapes are not found from the set. Even if the library has empty tapes.
I have read about Volume set, but I believe its something that is created automatically when the backup spans to the next volume after current volume is full.

Cannot import from the camera if there's no tape in it

Hello!
The title may seem silly, but in some cases I don't want to import from a recorded tape, but live from the camera.
I'm using a Sony Digital8 camcorder.
Once a week I need to record meetings and I don't want to use a tape, but instead, import directly to the hard disk to save the extra step of rewinding tapes and importing them, which takes lots of time and has an interruption when it's needed to change the tape.
If there's a tape inside and the camera recording is on pause, iMovie will import the live video perfectly until the camer shuts off 3 minutes later due to inactivity.
If there's no tape inside to prevent shutting off and wearing of the camera mechanism, iMovie won't allow to import, showing a blue screen with sometinhg like "No tape in camera" message.
The only solution I've found to this is to put the camera recording and, at the same time, iMovie importing.
It works this way, but it is useless to record to tape and to interrupt the importing to change a tape.
Any solution for this?
Any way to get iMovie to import without a tape inside the camcorder?
Thank you very much for your help!
Pedro Regalla

Hi
Karsten's right as ever but to get a taperecording is a good backup if You might
need the material in the futur.
Now I would suggest something that may well start an avalanche of disagree.
1. Use a 90 min tape - not controversal - but
2. You might try to set Your Camera into LP-mode = 90 min on a 60 min tape
and even more with a 90 min tape.
Last idea is nothing I've tested - so it might give all various sync problems.
3. Buy an iSight Camera.
First idea I used during a play and simultaneously feed the S-video out to an
editing board with very good quality. (The tapes were a great access though
I could make my own editing in after hand)
Yours Bengt W

Problems with importing video tape into iMovie '08

I'm using a canopus advc 110 to import video tapes from a vhs recorder into iMovie. BUT, the process often stops after only a few minutes when I still have a long way to go. I'd like to be able to leave it to work for 20-minute chunks (longer if possible, but I think that's about the limit), but it keeps stopping after a few minutes. When I come back in the room, it keeps trying to import (time in upper right corner keeps going) but had quit earlier according to time on the lower center of the iMovie screen. This is adding to my frustration and time, which is limited. Any suggestions??

The canopus advc 110 will work IF you have a perfect tape.
Look at the Grassvalley ADVC300 it has the ability to compensate for bad tapes. Using Line Time Base Correction (LTBC), ADVC300 instantly cleans, stabilizes and preserves old VHS and Hi8 videos in clean DV format. No need to monitor, just start and forget. Fast forward the tape all the way and then rewind all the way before import will never hurt.
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source and convert it to FireWire (iMovie will treat it like a camera).
http://www.grassvalley.com/products/advc300
The ADVC300 is for anyone who wants to do editing and is concerned about quality of color and speed, for the novice it is an incredible gizmo that will restore VHS tapes to a state close to the original fixing midtones, highlights and shadows on the fly. Not only can you simply convert analog to digital you can actually manipulate the signal going in (if you want to).
A bit pricey bit it WORKS.
I would use iMovie 06 with iDVD 08/09.
iMovie 08 and 09 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
Your workflow is editing DV clips and making DVDs, so iMovie 06 is better suited. Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels aspect ratio, and original quality. If you share your movie from iMovie 09, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
iMovie 06 and iDVD 08/09 is a "lossless" combination.
iMovie 09 is a wonderful programs assuming that you're using it for what it was designed to do, assemble videos to share on the Internet.

Secure backup labeling tape with volume id

I am new to OSB. I am trying to manually label a tape with a volume id using obtool.
Tried this:
labelvol drive raid_0n obtaropt -Xfam:SEE obtaropt -e:SEE-000005 5 force
I get error: Error: Volume ID is disallowed when labeling/reusing (tag is permitted)
Any suggestions?
Thanks
Joe

I have another question.
I have scheduled incremental back-ups once a day.
The data is never appended to previous day's tape.
A new tape is labeled every morning and written to.
I have set the write window time to 1 week in the 'Default and Policies' area.
Any suggestions?
Thanks
Joe

Need HELP with importing high definition tape

I am using Imovie 6HD - and trying to import a high definition tape from a CanonHV20. After importing the first tape I had a screen saying LETTERBOXING which went on for ever. I noticed it made black border tp/botom on the frames. I don't want that. What should I do - I have more tapes to import.
What settings do I need? As mentioned I used High Definition Tapes so I would like to have a high definition movie/dvd. Also after burning the dvd I suppose I can play that on any tv?? Please help with detail explanation!!
Thanks.

teit wrote:
.. import a high definition tape from a CanonHV20. .. a screen saying LETTERBOXING ...
wrong setting on Import/New Project:
• select in New Project dialog 'HDV 1080i' or 'HDV720p' (=depends on your settings on your camcorder...)
... I would like to have a high definition .../dvd. ..
no such thing.. DVDs are allways 'Standard'-only.
• drag iM project file into iDVD = automatic conversion from HD>>SD ..

Problem with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?

Hello,
my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
Thanks in advance!
Sincerely,
hoho33

"
Can you restore that JSON backup in a new profile?
Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
A JSON backup starts with: {"title":"","id":1,"dateAdded"
A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
You can try if you can restore that JSON backup in a new profile.
Create a new profile as a test to check if your current profile is causing the problems
See Basic Troubleshooting: Make a new profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
firefox support won't to help me to solve my problem!
If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
like HP, Dell , etc. give remote desktop support to their users!
Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
Greetzz

How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

How can I import pictures from my iphone to PC which I imported to the iphone from another PC? The folder doesn't show on my computer. I see all other pictures I took with the phone but not the imported folder.

Photos that were synced from a computer won't show for copying to a computer. If you want to copy them back then you will need a third-party app on your phone such as Simple Transfer which can copy them off via your wifi network. But photos are 'optimised' when they are synced to a device, any that you then copy back to a computer may not be exactly the same as they originally were on your computer (e.g. their dimensions might be different and their colours may look a bit different).

Tapes with (Imported) in the label

Similar Messages

Maybe you are looking for