TAPI Device not showing in application
I've installed the CiscoTSP.exe onto a Windows XP machine and the "CiscoTSP001.tsp" provider is shown in the Windows "Phone and Modem" screen, however, when I run any TAPI application that lists all of the available TAPI line devices, there is no Cisco line device listed (have tried 3 3rd party apps and the windows dialer.exe).
Is there anything else that has to be setup and do you need a valid connection to the CM to get the line device listed?
First of all make sure you are installing the CiscoTSP version for corresponding CCM version.
If you already installed TSP then uninstall it and remove the directory from programe files. Also remove the Cisco Wave driver from Device Manager in Control Panel.
Note that if you install the SimClient software provided by Cisco on the same PC where CiscoTSP is installed. Then TSP will not show devices.
Now restart the PC and install the TSP agian. Hopefully it will work. Try run Phone1.exe application which is widly used among TAPI developers.
Similar Messages
-
The purchased items it is not showing all applications
I HAVE IPHONE 4S 16GB
WHEN I GO TO APP STORE FROM THE IPHONE TO THE PURCHASED ITEMS IT IS NOT SHOWING ALL APPLICATION WHICH ONE I DOWNLOADING
PLEASE I WANT A SOLUTION.Hi, rsvip7.
I would recommend closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close. Test the results after processing these steps by attempting to access your previous purchases.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
If the issue persists, I would verify which Apple ID was used to make the purchases you are unable to locate. If the application is located on your computer, you can either Right-Click and Get Info on the selected media for Windows or Control-Click and Get Info for Mac. The Apple ID that was used to purchase the media will be on the Summary tab. You can also verify what Apple ID it was purchased with by accessing your purchase history by following the steps below.
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
If the account used to purchase the missing content is different, you will need to login with that Apple ID in order to access prior purchases.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Hope that helps,
Jason H. -
Adobe Photoshop elements 10 Editor not showing under application support;adobe
Adobe Photoshop elements 10 Editor not showing under application support;adobe on a MAC. I would like to add actions in photo effects but can't add like instructios say because it is not in adobe.
SSharpPhotography I would recommend posting your inquiry to the Photoshop Elements forum.
-
Device NOT showing up on my monitor when plugged in?
Iphone plugged in.
Device not showing up? Any ideas?You're welcome.
This link applies to a Mac.
http://support.apple.com/kb/ts1591 -
Devices not showing up on I-pod, how to disconnect safely?
devices not showing up on I tunes for I pod, how to disconnect I pod safely
I fixed the problem on my own , hey I'm a genius!! I clicked on my i-pod tab on the left column in i tunes and where the options for podcast tab is just changed the sync option to all podcasts instead of last looked at. Now i have all my podcasts in the video podcast menu on my i pod.
-
Nokia 5233 not showing installed application...
my nokia 5233 not showing installed application in installed application folder. i have opened through menu>applications>installed application. but its not showing installed files... Kindly help me.....
I think..it will inform you that the Applications Manager memory is full..
.....so, either un-install some applications or close a few programms that are running in the background..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box... -
Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?
Had the same issue. Tried everything that was posted for troubleshooting bye apple and on the discussions.
Finally, tried something that solved it and it works flawlessly now. I changed my wireless router.
I was using my ISP's supplied ZyXEL PN660 ADLS2+ with Wireless N. Swtiched to an older Linksys WRT160N and it is working beautifully now.
Take a look at your router, make sure the firmware is up to date, and that UPnP is enabled, and if all is correct, and you have done everything else, try another Wireless router if you can. -
Greetings
using a G5, tiger 10.4.9
I have been using this computer for many months with no problem using firewire devices. I recently set up a seperate user account on the computer for my daughter. Prior to this ( for many months)I had a fireiwre device - LACIE external HD -connected that would mount each time at startup and show up on the desktop. Now, I can't get the icon on the desktop of the LACIE to show when I startup. I connected a camera to the computer using firewire, but it too would not show ( before it would). When I connected the camera using USB, it showed up on the desktop. Looks like firewire devices not showing. I checkd System Profile and it shows the LACIE device as connected and functioning. But it won't show up on the desktop. Any ideas on why I can't ge the Firewire devices to show on the desktop?
Thank you in advance for you help. . . .
Brian
G5 Dual 2.7 Mac OS X (10.4)
G5 Dual 2.7 Mac OS X (10.4)
G5 Dual 2.7 Mac OS X (10.4)
G5 Dual 2.7 Mac OS X (10.4)Sounds like you have the name wrong. Open Disk Utility and take a look to verify the volume name. Disk Utility will list the drive itself, then indented below that is the volume name. To verify that you are using the correct name, try launching Terminal and do a list command:
ls -a /Volumes/"Name of Volume"
Hit the return key and see if the contents of the volume are listed. There is a space after "ls" and another after "-a"--if you don't get anything or get an error then you might want to try
ls -a /Volumes
and try copying the name from the list and pasting into the AppleScript.
Francine
Francine
Schwieder -
Why does new music purchased on one device not show up in the library of the other?
Hi Bev5638,
Welcome to the Support Communities!
The article below will explain how to set up Automatic Downloads for your computer and devices.
iTunes Store: How to enable Automatic Downloads
http://support.apple.com/kb/ht4539
Cheers,
- Judy -
HT6337 Allow handoff between this mac and your iCloud devices not showing up in general preferences
Is anyone not seeing this? the Allow handoff between this mac and your iCloud devices not showing up in general preferences
Imac 2011 21" mid 2011nevermind, Just figured out that my iMac does not support it. Thanks Apple, once again coming up with stupid functionality that only works when you pay more money. 3yr old machine, I guess I need to send it to scrap heap.
-
Lion 10.7.2 / iTunes 10.5 - Devices not showing up
Any device attached via USB is not showing up in iTunes. I have the following ipad2, iphone 3gs and itouch (latest gen)
USB connections are working as ipad2 and itouch devices show up in iPhoto.
I have a Mac Pro Early 2008 version.
I've tried the following:
1) switching USB ports on my Mac Pro
2) rebooting Mac Pro leaving devices powered on
3) rebooting devices leaving Mac Pro on
4) turning everything off, and booting Mac Pro first. waiting 2minutes and then powering on ipad2, iphone, itouch
Nothing seems to work. Hoping someone else is stuck in the same spot or can advise next steps.
Thanks,
NickSo far the only solution I have been able to find has been launching the recovery partition and running disk repair. That will fix the problem until you trigger it again. Fortunately, or unfortunately, I have pinpointed what triggers it on my computer.
Seems to be a flaw in keychain access. When Safari's connection times out due to an expired certificate (common in university networks that require a log in every few hours), the security settings freak out and effectively shut down safari's ability to do anything. The fact that it attacks KeyChain access and iPhoto and more is just a really big system wide glitch. Here's the run down:
http://digit.algravitas.com/2011/10/major-networking-glitch-found-in-os-x-v10-7- 2/ -
Network devices not showing up under "shared" in finder bar
Ok so i have a network that consists of a maxtor nas device, 2 win xp pc's, 1 win7 pc, d-link 524 router, and my macbook pro. I would like to be able to transfer files between my mac and the devices and use the printer attached to my maxtor. My issue is that none of the computers show up under the "shared" section of finder or under network. I use to have this issue with leopard but it resolved itself. Now under snow leopard for a couple months and i have yet to get it work. I can access my mac and other pcs from a pc. Anyone know how to get my network to show up on my mac?
Your problem is very common under Snow. At first my shares did not show up under shared in finder windows. I, then, of course, used "Connect to Server" to connect to the shares--both Mac and PC. I found that the more I kept the shares active the more likely they were show up under shared. Then, I discovered that if I kept the computers from sleeping during the period of needed access they would tend to stay in shared without nearly so much keeping the connections active.
If you do not like the above work around, then there are two other possibilities. You can elect to show mounted items on your desktop. Do that and connect to each share. Then, go > users > unlock > + login options > try dragging the mounted shares to the login item window. If successful, then the shares should be available at login.
Another approach is to mount and connect as indicated above. Then, making an alias to the share should at least make things faster. -
Shared devices not showing up in finder
Shared devices on my network are not showing up in Finder on my MacBook Air. Problem just began in the last 24 hours, and is limited to just this computer. Have done usual things -- checking, unchecking shared devices in Finder; relaunching Finder; restarting computer. Any ideas?
Your problem is very common under Snow. At first my shares did not show up under shared in finder windows. I, then, of course, used "Connect to Server" to connect to the shares--both Mac and PC. I found that the more I kept the shares active the more likely they were show up under shared. Then, I discovered that if I kept the computers from sleeping during the period of needed access they would tend to stay in shared without nearly so much keeping the connections active.
If you do not like the above work around, then there are two other possibilities. You can elect to show mounted items on your desktop. Do that and connect to each share. Then, go > users > unlock > + login options > try dragging the mounted shares to the login item window. If successful, then the shares should be available at login.
Another approach is to mount and connect as indicated above. Then, making an alias to the share should at least make things faster. -
EA4500 Router Device not showing up in device list - Please Help
Hi all
I have an EA4500 and am using Cisco Connect Cloud software. Its working mostly fine except that I have one device on the network that will not show up in the device list. This is not an issue in itself and normally I would ignore (although it used to show up when I forst got the router) however.......
The device is a WDTVLive media unit and required access to windows shares on a media server. Now the WDTVLive device is server an ip address by the router and is available from everywhere on my network but every couple of days it loses the capacity to search windows shares.
I know what you are thinking and I initially thought the same, this is an issue with the WDTVLive box. However one day I spent a few hours trying to resolve (Am an IT Consultant and know a little about networks) and found that I could not fix the issue. I then rebooted the router and it started working. I have since confirmed that every time it breaks I have to reboot the router.
So I kind of think the two issues are linked.
Sorry for the ramble. Can anyone help please.
Thanks in advance
AlanFurther to this issue which I ignored as it did not really cause any issues, I recently clicked a samsung tv device which thinks that is three different devices. It has three lan addresses listed. One of the addresses listed is the original device that will not show up so I suspect that this is why it does not show up.
It seems that I have a conflict but I can find nothing anywhere to allow me to resolve.
I cannot even delete the Samsung TV device as its x button is not editable.
Should I just try removing the cloud connect software. I must admit that I am starting to think that I made a bad decision with this router.
Any help would be greatly appreciated -
Successfully enrolled devices not showing in profile manager
On a newly installed (from scratch, formatted etc) Mountain Lion server, I'm having an issue where I can successfully enrol a device, an iPhone with 6.1 iOS in this case, but the enrolled device does not show up in the devices?
I see a previous post in these communities with a similar issue, the solution was to add place holders after the device was enrolled, unfortunately this is not a solution for me, as soon as you re-enrol the placeholder dissapears I have another server running mountain lion at another site and this is working just fine.
Any solutions? I'm pulling my hair out with this. I have a niggling feeling that with the other server I had a similar problem when I upgraded to Mountain Lion and had to edit one of the ruby files in the profilemanager to display the devices but I can't remember where or when
Regards,
Stephen...ok update to this problem:
If I enroll a Mac device, in this case the mini server itself then these are displayed under the device library.
also tried an iPad with iOS6 and this was successful, and displays in the device library.
Currently the iPhone is not displaying although enrolled successfully is an iPhone4 so I'm going to experiment with a few other devices and see whats happening
Maybe you are looking for
-
I just bought a new ipad and would like to transfer files from my macbook pro. I cannot get icloud to work on my Macbook. I cannot get Maverick to load on my macbook.
-
Urgent facing problem when starting the weblogic admin serverof soa11.1.1.3
install the soa 11.1.1.3 trying to start the admin server of weblogic getting the below exception plz help me its urgent. ####<Jun 9, 2010 10:31:55 AM IST> <Critical> <WebLogicServer> <PC-AMD40> <AdminServer> <main> <<WLS Kernel>> <> <> <127605971550
-
Hello, all. Very new to Logic here. Just asking a series of questions to try to continue my knowledge on this program. Here's one: Among others, there are audio tracks, audio instrument tracks, and midi tracks, correct? Okay. I understand audio track
-
I sought to update my Bridge and Photoshop CS5 programs to Camera Raw 7.3, but continued to get an error message when downloading. I need to make this update to read some files I shot on Nikon's "NEF" raw system. The error message reads "Updates co
-
When I try to insert a burned disk with data on it, I get the message "this computer cannot read the disk" The options it gives me are "ignore" or "eject." I've tried changing the "hostconfig" file in the "etc" folder, as suggested by the support web