Tapimgmt.msc not found on Windows 7 or 8 workstations

We are trying to work with a TAPI application in our office ... Everything appears to install properly, however, when we go to configure the workstations, we are told that tapimgmt.msc is not found. This happens on our Windows 7 and Windows 8 workstations.
Looking in MMC, the Telephony Snap-In is also not available, nor is Telephony a Windows feature we can add through "Control Panel | Programs and Feature". Thinking it had to do with the way Windows was installed, we fired up a new workstation
and performed a fresh install of Windows 8.1 Pro. The Telephony Snap-In did NOT install there either.
How do I get the Microsoft TAPI drivers and Management snap-in installed on these machines?????
Thanks ...
John Powers
Springwise Facility Management
IT Director

Hello,
>> How do I get the Microsoft TAPI drivers and Management snap-in installed on these machines?????
For it, I would like suggest you asking it here:
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro%2Cw8itpro%2Cwindowsvistaitpro%2Cwindowsxpitpro%2Cwindowsintune
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

HT1751 unable to open itunes because MSVCR80.dl was not found error7 windows error126

cannot open itunes because MSVCR80.dl was not found error7 windows error126

Check out this page: Troubleshooting issues with iTunes for Windows updates

Dotfuscator CE error: External type not found System.Windows.Input.ICommand,PresentationCore

Preemptive will not support CE so I am trying here...
I have an application targeting the .NET Framework 4.0. It builds and runs fine but I cannot get it to compile in Dotfuscator CE. I am stuck.
Dotfuscator CE (v5.0.2500.0) with Visual Studio 2010 SP1. Here is the Error:
Resolving method references...
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Build Error.
The problem seems to originate from ICommand being moved from PresentationCore.dll (in NET 4.0) to System.dll (in NET 4.5). Studio handles this and compiles fine as I am targeting NET 4.0 and the references all point to
C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0\
Dotfuscator CE however does not seem to handle it correctly and I am not sure how to correct the issue. Any help would be greatly appreciated!!

Hi Perter,
Thanks for your response.
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Maybe it is related to the references in your project.
Reference:
The type 'System.Windows.Input.ICommand' exists in both 'PresentationCore.dll' and 'System.dll'
Since it is not the VS General issue, I am moving your question to the moderator forum ("Where is the forum for..?").
The owner of the forum will direct you to a right forum. Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Oracle service orcl not found in windows services

hello
i'm facing a very serious problem. MY server ORacleserviceorcl not found in services. all services currently up and running. but ORCL service not show there and my database is down how i start my database. i found this problem first time. plz help me how to Start oracle. my ORacle version 10g on windows server 2003

Niall,
Do you think that the OP should try the following command to re-create the service:
C:\> ORADIM -NEW -SID ORCLAs far as I have been able to determine, that command will not cause an issue, and will return an error if the service already exists.
To the OP: It is possible that a utility, such as HiJackThis, was used to remove the service, the Windows registry is corrupt, someone used ORADIM to delete the service, someone was hacking away in the registry and accidentally removed the entry for the service, or any number of other possibilities (I am not sure if MSCONFIG will remove a service when that program disables the service, but that might be another possibility, and dropping the database is another possibility).
Charles Hooper
Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.
Edited by: Charles Hooper on Jan 22, 2010 10:42 AM
Added the note about dropping the database as a possible cause - see if the datafiles still exist.

ORA-01882: timezone region not found in Windows 2003 Server System

Hi,
I am using windows server 2003 and the IDE jdeveloper 11.1.1.1.0. I have this error ORA-01882: timezone region not found .
To resolve it, I added -Duser.timezone=GMT in my project properties. It doesn't work in windows server 2003. I tried the same thing in windows xp it works well.
So, what's the problem concerning windows server 2003 ??
please help me.
thanks a lot.

no such TZNAME as Africa/Luanda Version 4 of the timezone patch doesn't have that one either, and if you don't have at least version 3 the DST rules won't be correct for the 2007 DST changes. v4 does have Africa/Windhoek if that's close enough, can't tell if that one is in v2 we don't have anything on a patch earlier than v4.
Might be able to work around it by specifying an offset (i.e. +1:00) instead of a named time zone, patch files for the base 10.2.0.1 aren't even listed in support note 412160.1. There is also note 396387.1, "Workarounds when Database time zone patches are not available for your patchset" that one might be helpful.

Server not found when Windows wakes up

When I wake up my Windows 7 desktop machine Firefox 7 always shows "server not found" errors for websites that continuously update, like huffingtonpost or drudgereport.
Clicking on "try again" always works fine, but I'd like to know how to set things so it would happen automatically. This started with Firefox 4.0. before that there was no problem.

It is possible the firewall hasn't completely restarted since the PC is waking up from sleep mode, but I would still blame Firefox. It should allow for this possibility just after sleep mode has ended instead of putting up a dialog box I have to click manually to fix the problem. Other browsers (Internet Explorer) don't have this problem.
But if there is a Firefox option along the lines of "wake up last after sleep mode ends" that I don't have set properly I'd like to know about it.

Server not found by windows vista home version

Hello, can somebody help me bei sign in on icloud? After log in I get "server not fount" Using windows vista home!
What shall I do than?

It could be a firewall or anti-virus software issue that is causing this. You can test this by temporarily disabling the firewall and/or anti-virus software.

HT1923 Can not uninstall old version because the file it is looking for is not found on windows 8.1

First off I want to start that I am an IT professional, so not a dumb PC user.
I am running Windows 8.1. I have been running Itunes for a long time and when the auto-updater prompted me for an update, I used that to update. Aparently something happened during one of the updates and Windows thinks I have v 11.1.1.1 installed as well as the newest version. I discovered this when I connected my Ipod recently (It was a few months since my last sync) and it wasn't be recognized by Itunes. Windows discovered it as a device but Itunes wouldn't see it. I went to the forums/support and tried the trouble shooting steps to no avail. I finally did the normal "uninstall/reinstall" process and that is when I saw the two entries in the programs list in windows. I uninstalled the current version. When I tried to reinstall it would error out with "can not find the path to iTunes64.msi". I had a few of them in the path but they were for newer versions, not the 11.1.1.1. Then I looked around and saw the directory tree for Itunes were still there.
I tried to edit the registry in the local machine->uninstall hive but itunes was not on the list there because I went through every entry. They all had the names from programs on the list but Itunes wasn't there. I uninstalled everything else as per the Itunes support instructions (Quicktime/Bonquor/Etc) and still it didn't work. I deleted the Itunes directory manually and then ran CC cleaner to a few times to clean out all the broken registry entries. After that was done I still couldn't install Itunes because it detected the program from the list in windows that said it was installed (v 11.1.1.1). I restored the directory from my recycle bin, launched the exe directly and it worked and I was able to detect/sync my Ipod. BUT the system doesn't think I have it installed so I have to manually kick it off from the exe itself.
I want to fix this. I would think it would be to edit something, registry I assume, that populates that installed program list and then the newest installer should run fine. I am stuck so I am looking for help. Any suggestions/ideas or anything?
Thank you in advance.

I can't seem to find a way to delete this...SO I unmarked it as a question.
I solved the problem, I aparently missed the program ID number when I searched. I found it and then went through the registry and removed the other references to that ID. Once I did that I was able to install the new Itunes without incident. In the process it also cleaned up the old entry on my programs/features list.
Even though I checked the registery 2x trying to clean up references to Itunes, the search and my manual look through the Uninstall entries I missed it. Sorry to waste anyone's time.

Harddisk not found by Windows-XP-Setup + RnR does not work at all !?!

Hi all,
I wanted to recover a my system (R61, 8943-DKG) using RnR from the Windows XP-platform. It took more than 24 hours and "finished" with a reboot saying "windows could not be startet, as the following file is missing or has been damaged: \windows\system32\c_1252.nls. You may try to repair the file by starting the Windows setup from the original CD. Use the "R"-Option to start the setup-repairing" (this is my translation of the german message I got, the exact english wording thus might be different).
Two problems occur and leave me with no options/ideas at the moment:
1) Starting the "R"-Option or the "install new"-option of a windows setup from an XP-CD (from another machine, the ThinkPad came without any CDs/DVDs), gives me the message "no harddisk could be found". In the BIOS the harddisk is found an the hardware check passed.
2) Pushing the blue Thinkvantagebutton while booting starts the Rescue and Recovery software, but after "configuring your system" the laptops reboots, so no chance to start RnR !?!
My questions to the honoured community:
a) Is there any chance to make the harddisk "visible" for the XP-Setupprogram?
b) Do you have another idea how to start the RnR-software in order to at least reinstall windows-XP freshly from the harddisk?
Thanks in advance for any help!
JoerchS.

Hi JoerchS,
1. You need to go into BIOS and set 'SATA AHCI' mode to 'Compatibility' under hard disk drive option for your HDD to be seen by Win XP CD.
2. Sounds like the partition has become corrupt. To recover you system again, recovery discs are needed. If you have not created recovery discs in advance [http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70804] then you will have to obtain them from lenovo usually for a fee.
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Satellite Pro P300 - PSPCDA-01L00D - DVD not found after Windows 7 upgrade

After performing a clean install of Windows 7 Home Premium, then downloading the necessary drivers from the Toshiba support website there are issues with the DVD player in my laptop.
I downloaded the Toshiba DVD Player application, which auto detects which version you need. After allowing the application to run, I get the message "No Toshiba DVD installation could be found! You can only update an already installed version."
How do I get the DVD player to be recognised, so the application will install. Currently the DVD player will not play DVDs - which will be an issue for my daughter who is using the laptop.
Also, the Windows 7 driver page mentions updates will be available through Toshiba Service Station, but provides no link. A search of the Toshiba website fails to locate it, where do I get this utility from?

Hello
I agree with Mike30. As you can see on Toshiba website, its just an update but no full version. Full version of DVD player is only preinstalled on your notebook and included in Toshiba recovery disk.
But in my opinion you dont need additional DVD player software. Its a little useless but thats my personal opinion
I prefer the allround tool VLC media player because it can play all known audio and video files. Its small and freeware player and I can recommend it.
Have a look on VLC media player page:
http://www.videolan.org/vlc/

Pavilion dv4 1404 tu fingerprint not found after windows 10 upgrade

After upgrade to windows 10 pro 32 bit from windows 7 ultimate , i found out that my Fingerprint reader is not working . i installed digital persona from drivers of my laptop but it says fingerprint reader not detected . Help me

Hi, Thank you for posting this. You may want to try HP Support Assistant - http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl_ot_ob_ds_pd/hpsupportassistant_cc/dt#.VdCsr0ZrhOg This is great tool which you can use for various thing. It can scan your computer and provide the best drivers available for your system.

Ipod touch not found in windows

I cannot find my ipod touch in windows explorer, disk management, safley remove hardware, or winamp. Please help. This is a fresh windows install, it said "installing device driver software" and then stated it was successful, but does not assign a drive letter to the Ipod touch. It reconizes it as a camera. This ipod touch has music on it (not a problem to format) and has been used before in itunes. Itunes will not be installed on this computer but I am wondering why the drivers arent installed so winamp can use it. Thanks for reading,
enduser000

Figured it out, it's called MTP, only usable by itunes, great stuff.

6th Gen Nano not found in windows 7

Ok so i just got a 6th gene iPod nano, i have been trying to set it up, but my computer won't recongize it (windows 7). I have tried everything, i have uninstalled and reinstall itunes, i have done the misconfig, i have reset the ipod, i have used different USB ports, i have used a different computer, i have made another user and tried it there, NOTHING IS WORKING, i've done all the help stuff here on the site that i have found and it just won't be regonized, i'm getting horribly frustrated and would love some help.
My itunes is up to date and there have been a couple times where the set up has almost opened but i never goes past the first text box.

Capturing time is hard.. it is a capsule.. to hold fragments of history rather than a trap to capture time.
The TC uses illegal to the windows world names.. change all names for wireless and TC itself to pure alphanumeric with no spaces.
Open the manual setup .. on the disks page from the top menu..
Make sure you give the Windows WORKGROUP correctly.
I also recommend you turn on guest access.. read and write at least until you sort access.
Update the changes.. in the computer. Open the airport utility again and find what IP is the TC running at. Summary page will give you that.
In windows explorer type,
\\TCname
If that fails type
\\TCIPaddress
Where TCname is the new name of the TC.. and TCIPaddress is exactly that.. by default 10.0.1.1

Boot Camp partition not found by Windows installer

So I switched up to Leopard this morning with a fairly smooth Archive and Install.
I've got an XP Pro SP2 CD raring to run some Windows games, so I give Boot Camp Assistant a whirl. I create a 15 GB partition using the Assistant, and it reboots with my XP CD. XP goes through all of its driver loading, and I get past the disclaimer screen. But on the setup screen, where partitions are supposed to be listed, the only partition I see is my 130 GB OS X partition, and nothing else.
I can see the 15 GB Fat32 partition labeled BOOTCAMP in both Leopard, and with a liveCD version of FreeDOS, so I know it's actually there. But the XP installer, for some reason, cannot see it.
Anybody encounter this? Anybody know what I can do? I'm hurting for some Orange Box action.

you need to install windows support software on a usb 2 flashdrive. more simply, start over in bootcamp, insert your usb drive as well as the dvd, check all 3 options. bootcamp will do the rest.
or it could be a problem with the install disc, why not download win 7 iso from here;
http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/
and go with this, its perfectly legal to use your activation code during instalation.

Missing History and Snapshot panels, not found in Window dropdown menu

Both my history and snapshot panels disappeared (LR5) suddenly, and neither appears in the Window>Panels dropdown menu.
This *may* have occurred when I was trying to bring up my target collection (command B). I must have accidentally hit some other key(s), because suddenly I was taken to the last folder I was in.
I'm afraid to close LR and reopen it, in case that makes the problem worse. I really want those panels back!

Folders should not appear in the Develop Module, this panel is in the Library module only
The folders didn't appear in the Library module.
But now I have clicked something else (and I don't think it's Wacom-related now) ... it was something in the Window dropdown menu, and once again, I get the folders back but the snapshots and history are gone! Aaarggh.

Tapimgmt.msc not found on Windows 7 or 8 workstations

Similar Messages

Maybe you are looking for