Tapping on a single image to make it fullscreen?

Hi All,
I want to be able to tap on a single image to make it full screen, be able to pinch and zoom it, then tap to close it.
Is there a simple way to do this?
Thanks.

It's do able - but there are cons
You can place an image into a "Pan and Zoom" Overlay - make that full screen and stick it in a Multistate object with a tumbnail, then place an invisible button over the thumbnail
This is a work around, and if you place the invisible button on the thumbnail, it will still be active when "Pan and Zoom" is initiated so you'll have to have a play regarding user experience!
Hope this helps
Tim

Similar Messages

How can I restore a single image from an aperture time machine backup, do I have to restore the entire library? that does not make sense

I hope there has been found a more efficiant solution for this, how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
any suggestions?

Did you try browsing your backups in the Finder ? That is, do not go and "Enter Time Machine". Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.

Is it possible to use Aperture to make a new image from two existing ones--ie, in a new jpg? I essentially want to create a collage that I can then print as a single image, rather than in a book. Any advice will be most welcome!

Is it possible to use Aperture to make a new jpg from two existing ones? I'd essentially like to create a photo collage (without using existing templates) that I can then print as a single image, rather than in a book. Any advice will be most welcome! Thanks.

https://discussions.apple.com/message/15678716#15678716
(Added)
The main point is that Aperture is used to make digital negatives as good as they can be (for the uses you define), but it does not ADD date to your digital negatives, nor does it produce NEW combination files. For those tasks you need a Graphics program.
Message was edited by: Kirby Krieger

How to make a single image with multiple clickable points?

Hi,
I just started using CS4 yesterday, but am pretty confused. I managed my first little achievement with it, but am havign troubles. I'm not even sure of the capabilities of the software to be honest, but I would like to know if I can have a single image, then have sections of it which can be hovered over with a tag and a link to another part of my site. Is this something that can be done?
Thanks!

Hi,
to reach several different links on the image you need to create so-called hotspot (I had to translate the following terms from my German Dreamweaver). How to do?
Click into the image
Open properties window
Open list box orientation.
Surround the image parts in question (look at the green arrow). Feel free/play with chosen forms.
Hans-G.
P.S.
You shouldn't use only images on your site.

How can i centre a single image within a page in the print module?

I am using LR5 and am trying to print a single image using print package in the centre of the page, equal borders on all 4 sides. There has got to be an easy way of doing this?

Not too difficult, what I do is take one of the Lightroom templates, for example, single image on US letter size paper. Make sure you have your printer set for that paper size.
Then in the template drag the guidelines at the top/botton and left and right hand sides so you have an even border to the size you want. Then check Zoom to fill and grab the image and move up/down or side to side to get the best view of the image. This will probably be a cropped image as the image aspect ratio will not match your borders.
This is for LR4 waiting for the next point release of LR5
Hope this helps

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

How can one place a single image on a spread? CS3-MAC

Hi all,
i How can one place a single image on a spread? CS3-MAC
A very straight forward question I think. I just never did it before. Anyone knows of a fast technique of doing this? I have to make 70+ images this way. Could it be scripted?
thanx in advance
Michael

You'll need to be more specific. Placing a single image on one spread is drop-dead simple. File > Place, choose file, click (or click-and-drag) to place, scale and position as desired. You can ask about scripting in the
scripting forum.
You might not need to script this to get efficient use of time. Make a picture frame on the master spread and then insert 140 pages (70 2-page spreads) based on that master. File > Place, and select all 70 files. (They need to be in one folder. Click on the top file, scroll down, lick on the bottom file.) Zoom out and click once on each spread to place each image. Should work faster that writing, testing, debugging, and running a script.

Metadata on single image print - How To

How do you print a single image and have the file/version name appear on the print?
I have various clients bringing me unlabled photos from 3 months ago, asking for reprints.
Unfortunately there are no identifying marks on any of the prints whatsoever.
How can I figure out which ones they are without visually comparing them against my enitre Aperture library of 75,000 photos?
In my other Profesisonal photo applications I print the file names directly on single prints.
How does one print metadata on single prints in Aperture?

Can we join in as well, or are you happy talking to yourself?
It's a pain if you want to do it with a single image, as you have to drag it into an Album by itself. But you can have a single Album somewhere for that - no need to keep making new ones and deleting them again.
If you want to print more than one image then simply select the ones you want and only those will be passed through to the print dialog, so I'm not sure where this thing about pruning Album contents is coming from. Aperture's printing facilities aren't the best, but it sounds like you are trying to make life more difficult for yourself.
Ian

Css single image rollover help

I am try to make some up and down adjuster arrows for a web
site I am working on, I would like it to look like the example
(next to text level 2) found here:
http://www.bigpictureimaging.com/061608test/homejs.html
<-------javascript example (desired look)
http://www.bigpictureimaging.com/061608test/homecss.html
<--------css help me please (what I am getting)
In the css method
I am trying to use "bdarrow3216dwnup.gif" for the off and
over state of the 2 buttons.
I can get the base arrows to show and the text links seem to
be off the page, as styled, but I am getting no rollover on lvldwn
and lvlup is not set up yet since down isn't working yet.
I think my problem is my css name is not addressing the class
I have given it but I am not sure, please help me
my correct example is done the old fashion way swap image w/
javascript, I have reviewed probably a dozen css single image
tutorials I have found on the web and I am not getting anything to
work properly, I have made these fine before I think my problem is
my style isn't targeting correctly or something above it is
cascading and voiding the desired style.
Are their any good tutorials showing how the css cascading
works (visual stuff is better for me).
http://www.bigpictureimaging.com/061608test.zip
Any guidance would be greatly appreciated
-- - TIA
palnudb

I am try to make some up and down adjuster arrows for a web
site I am working on, I would like it to look like the example
(next to text level 2) found here:
http://www.bigpictureimaging.com/061608test/homejs.html
<-------javascript example (desired look)
http://www.bigpictureimaging.com/061608test/homecss.html
<--------css help me please (what I am getting)
In the css method
I am trying to use "bdarrow3216dwnup.gif" for the off and
over state of the 2 buttons.
I can get the base arrows to show and the text links seem to
be off the page, as styled, but I am getting no rollover on lvldwn
and lvlup is not set up yet since down isn't working yet.
I think my problem is my css name is not addressing the class
I have given it but I am not sure, please help me
my correct example is done the old fashion way swap image w/
javascript, I have reviewed probably a dozen css single image
tutorials I have found on the web and I am not getting anything to
work properly, I have made these fine before I think my problem is
my style isn't targeting correctly or something above it is
cascading and voiding the desired style.
Are their any good tutorials showing how the css cascading
works (visual stuff is better for me).
http://www.bigpictureimaging.com/061608test.zip
Any guidance would be greatly appreciated
-- - TIA
palnudb

JpegImagesToMovie to read single images

Hi,
I found that JpegImagesToMovie reads a list of images first and then creates the movie. Is that correct?
Can I make it to read image by image without the use of a Vector, just to load single images, one at the time and at the end to save it to video?
Thanks

Hi MDM_PS,
One idea is that we can used the ADO.Net knowledge, for example, we can use it like this “SELECT top xx from table…”, we can store the data in a new data source, then use this new data source in the unit test.
Tony also shared us a workaround , maybe you could refer to it here:
https://social.msdn.microsoft.com/Forums/en-us/f35d4e7c-1479-45f3-9985-38304e97b748/how-do-i-retrieve-value-from-single-cell-on-csv-file-using-data-driven-tests-for-codeduitest?forum=csharplanguage
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Single image in multiple picture boxes / shapes

hi all,
can anyone help please?
i have several empty picture boxes (they're irregular shapes and all in close proximity to one another) and a single image.
i want the image to appear in the shapes, but not repeated. another way to put it - i want the various segments of the image separated with these shapes... However - i want all of the image to be visible - ie where the image ends at the edge of one shape, i want it to continue in the next image without any gap in the image!
This almost works using Scripts -> Make Grid.... but obviously the shapes I want are all different shapes and sizes, not just a flat grid.
I've tried pasting the image into each box and moving each around with the direct selection tool till they look right - but it isnt practical. im sure there's an easier way of doing it?
hope that makes sense!
thanks very much for your help in advance!!!!

What did you end up doing?
I was actually thinking about this this morning and came up with a way to make freeform shapes using the scissor technique and a supplementary drawn path.
First cut the image frame (and I moved the pieces apart to make it easier to work), then use the Pen tool to draw a random shape path connecting the open end points on one of the pieces, closing the path.
Now select all the points you just added with the Direct Select tool and copy, then paste a copy. You'll probably see an extra point beyond each of the end points you selected, so delete those, then select the path and Object > Paths > Reverse Path (I'm not certain this is necessary).
Move the path into the correct position against the other piece of the cut frame, then select both and Object > Paths > Join.

Restore single image from managed library

How does one restore a single image from a library, either managed or referenced. It seems that in Time Machine one does not have access to the individual files in a managed library as one does from the Finder.
Is my conclusion then, that in order to be able to recover individual file(s) one should use a referenced library?

The Aperture Restore from Vault as you know saves your current library and restores all managed photos from the Vault. Note, previews are not stored on the Vault so they need to be regenerated (at least that was true in Aperture 2 but I have not done a restore in Aperture 3).
Referenced images are not stored on the Aperture Library or Aperture Vault, just the adjustments you make to the image. So if your image is mangled, but you know the external referenced image displays fine, say, in Preview, then something may have gone wrong with the adjustments or raw conversion etc. You can remove all adjustments on the mangled image and see if that corrects the display problem.
If the external image itself is corrupted, then Time Machine will restore it hopefully to a prior 'good' version as you know. The contents of an Aperture Library can be individually referenced via the Finder but it's not something where you can replace any of the contents as I understand that will damage your library integrity.

Will ACR ever have an equivalent to DXO's single image HDR?

Will ACR ever have an equivalent to DXO's single image HDR?

At first glance, it seems debatable that a tool needs "zero" or "center-scale" settings that cause nothing to be done to the image... A software designer might think, "well, he wouldn't invoke the HDR Toning tool if he didn't want an 'HDR toned look' to the result", and also perhaps "hey, he can fade the effect after the fact with Edit - Fade, or layer transparency and masking, or whatever".
For example, if there was a new "Make Image Greenish" tool, would you expect that it should have to have a 0 setting in which the image was not made any more greenish? You might - only if all other tools worked that way (as it turns out, most DO have settings that allow you to dial-in no effect at all).
I'm not in front of my CS5 system at the moment, but isn't what you're asking for is to allow the Strength control to be able to reach all the way to 0?
Maybe Adobe gets zillions of customer complaints about functions that don't do anything, only to reach the conclusion time and again that the less-than-expert user has the "amount" or "strength" value set to 0. I note that there are pop-up dialogs in Camera Raw now notifying you of just such things (to the tone of "you won't see any results because you have such and such set to 0"). There was a question on this forum about one of those messages not too long ago.
Personally, I'm with you. Especially in a tool that allows programmability (actions, scripts) , all functions really SHOULD allow its controls to reach zero / no effect values.
-Noel

All of Office 2010 Student and Home Edition Programs open as Microsoft Single Image instances since Installing Outlook 2013

Office 2010 Student and Home Edition has been running without problems on my PC since 2012. Recently installed Microsoft Outlook 2013 (The version of Office 2010 did not include Outlook), since then, every time I open any of the original Office 2010 Programs
eg XCEL, WORD, POWER POINT, ONE NOTE, the program opens in 'Microsoft Office 2010 Single Image' which appears to have to be installed every time any of the programs are opened. The Installation process takes anything up to a few minutes to complete and sometimes
when filing or printing a document, the install restarts, on occasions, in an endless loop which requires random,imaginative keystroke action to terminate. The program shortcut icons all point to the 'Microsoft Office 2010 Single Image' application, I have
not succeeded in finding where the original programs are located as a quick way of trying to fix the problem.
The new installation of Outlook 2013 opens normally.
Evidently, the Outlook 2013 installation has disturbed the 2010 licensing or something ellse, can this unintended change be reversed?
Short of a complete Un-install + Re-Install, I have tried every straightforward repair/ change (run All on my computer)/ enter product code etc option, all to no avail.
I have read of variations on the same problem relating to mixing Office 2003/ 2007, cases of Outlook 2013 starting up in a similar way, but no examples of the specific problem outlined above. The next step
is a complete Un-install + re-install of Office 2010, is this the answer or do I need to go further? Indeed, is there a quick fix?

Hi,
The Microsoft Office Single Image 2010 is a set of tools, documentation, and product files that licensed original equipment manufacturers (OEMs) can use to preload Office on new computers for distribution to end users.
I would suggest you to try the methods listed in this KB article:
http://support.microsoft.com/kb/2528748/en-us Just run the Fix-It tool mentioned in the page, or follow the steps to fix it by yourself.
A similar issue is discussed here, you might have a look:
http://answers.microsoft.com/en-us/office/forum/office_2010-office_install/microsoft-office-single-imagewhat-is-it-exactly/8a3fe920-d2b2-436e-9283-e7c085905692
Thanks,
Ethan Hua CHN
TechNet Community Support

Can i create a single image from multiple images in lightroom?

Can i create a single image from multiple images in lightroom?

Like a panorama, a composite or focus stack? Have you tried the Lightroom forum?
Photoshop Lightroom

Tapping on a single image to make it fullscreen?

Similar Messages

Maybe you are looking for