Tar files and file associations

What is the default tar file association in OS X? How do I go about restoring the default file associations in OS X?
Thank you.

What is the default tar file association in OS X?
The Archive Utility.
How do I go about restoring the default file associations in OS X?
Select an item, choose Get Info from the File menu, change the application under Open With, click on Change All, and confirm this action. The setting is stored in an item's metadata and in a file in your home folder for global associations.
(45046)

Similar Messages

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

HT1386 My computer was stolen with all my iTunes on it. However, my iPod was not stolen. How do I transfer all files from my iPod to my new computer (purchased files and files I copied from CDs)?

My computer was stolen with all my iTunes on it. However, my iPod was not stolen. How do I transfer all files from my iPod to my new computer (purchased files and files I copied from CDs)?

http://www.wideanglesoftware.com/touchcopy/index.php

Purpose of message protocol file and file content conversion

hi
i am currently working in idoc to file scenario,
In what cases we will go file and file content conversion in message protocol for file adapter.
can anyone specify the real significance of it? bcoz this may help me and continue my scenario in its suitable path.
Regards
Saravanakumar PK

Hi,
In XI (internal) all XML message are based on the XI Message Protocol.
See: http://help.sap.com/saphelp_nw70/helpdata/en/b6/0b733cb7d61952e10000000a11405a/frameset.htm
XI Protocol is nothing but an SAP XI extension of SOAP protocol and SOAP protocol is nothing but a SOAP request in a HTTP protocol. SOAP request is nothing but SOAP extension of an XML message. Hence finally it drill downs to the fact that XI message is in fact an XML message with some extra information in the header which are SAP specific like the SAP Runtime, SAP Hoplist, etc...
File Content Conversion
Integration Engine understands only XML messages.Now if u r handling normal text file such as 'tab separated' file,'# separated' file, or a CSV file, you need to convert the content of the file to XML and File Content Conversion mechanism helps to do this job.This File Content conversion mechanism(option)is present with the File Adapters.both Sender and Receiver.
How to do FCC:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
Thanks
Swarup

I am trying to create a panorama, when I enter File New I don't get the Photomerge Panorama option, the only options that appear are Blank file and File from clipboard. How do I get photomerge panorama

I am trying to create a panorama. When I enter FILE > NEW > the Photomere panorama option does not appear. the only options are Blank file and file from clipboard. This is in Elements 11 on Windows 8.1 OS. How do I get Photomerge Panorama to appear.

Since PSE11, you access the photomerge option in the 'Enhance' menu, last option. Or you can use the organizer (menu Edit / Photomerge).

Writing File and File Member to AS400 using Access Classes

Hi! All,
I am in a fix here and would sincerely appreciate any help I can get. I need to write a pogram that will allow me to write a file and many FileMembers to the File in the AS400.
I have the following method which I thought would help me do it, but I get exceptions.
public static void writeFileOnAS400(String pFileName, String pFileMemberName, String pContents ) throws Exception
AS400 as400 = new AS400();
String as400FileName = "/QSYS.LIB/MYLIB.LIB/" + pFileName + ".FILE";
String as400MemberName = pFileMemberName + ".MBR";
// Create a file object that represents the file
SequentialFile newFile = new SequentialFile(as400, as400FileName + "/" + as400MemberName);
// Create the file
newFile.create(pContents.getBytes().length, "*DATA", "Data file created with " + pContents.getBytes().length + "byte record." );
// Open the file for writing only.
// Note: The record format for the file
// has already been set by create()
newFile.open(AS400File.WRITE_ONLY, 0, AS400File.COMMIT_LOCK_LEVEL_NONE);
// Write a record to the file. Because the record
// format was set on the create(), getRecordFormat()
// can be called to get a record properly formatted
// for this file.
Record writeRec = newFile.getRecordFormat().getNewRecord();
writeRec.setField(0, pContents);
newFile.write(writeRec);
// Close the file since I am done using it
newFile.close();
// Disconnect since I am done using
// record-level access
as400.disconnectService(AS400.RECORDACCESS);
This works the first time for the 1st Member(ie; when te file or Member is not yet created). When I want to add a new Member to the same file, by passing in the same fileName, but a different fileMemberName, it does not work. The string pContents is what I need to write to the Member.
Anyone Know about the AS400?
Thanks

The whole class is as shown below
import com.ibm.as400.access.*;
public class AS400Utility
public static void writeFileOnAS400(String pFileName, String pFileMemberName, String pContents ) throws Exception
AS400 as400 = new AS400();
String as400FileName = "/QSYS.LIB/IQFILES.LIB/" + pFileName + ".FILE";
String as400MemberName = pFileMemberName + ".MBR";
// Create a file object that represents the file
SequentialFile newFile = new SequentialFile(as400, as400FileName + "/" + as400MemberName);
// Create the file
newFile.create(pContents.getBytes().length, "*DATA", "Data file created with " + pContents.getBytes().length + "byte record." );
// Open the file for writing only.
// Note: The record format for the file
// has already been set by create()
newFile.open(AS400File.WRITE_ONLY, 0, AS400File.COMMIT_LOCK_LEVEL_NONE);
// Write a record to the file. Because the record
// format was set on the create(), getRecordFormat()
// can be called to get a record properly formatted
// for this file.
Record writeRec = newFile.getRecordFormat().getNewRecord();
writeRec.setField(0, pContents);
newFile.write(writeRec);
// Close the file since I am done using it
newFile.close();
// Disconnect since I am done using
// record-level access
as400.disconnectService(AS400.RECORDACCESS);
public static void main(String args[])
System.out.println("Writing file to AS400...");
try
writeFileOnAS400_2("BPL0000004", "M001", "<SampleXML>The sample file 1</SampleXML>");
System.out.println("Finished writing file 1");
writeFileOnAS400_2("BPL0000004", "M002", "<SampleXML>The sample file 2</SampleXML>");
catch(Exception e)
e.printStackTrace();
System.out.println("Completed file writing to AS400...");
}

Bank File and File Formats

When sending ach file to bank after it gets placed on application server (what is application server transaction code) a direct interface or not? If not what is a direct interface?
What is flat file and xml file. Please tell the difference with example??
What are various file formats sap supports for importing ebs in sap? What information should be requested from bank?

Hi Sheena,
1. Outbound files - You can create a ACH file in any format you want. SAP support text file, IDOC.
After you run your payment program - F110 - the last step is to create the payment medium. When you run this payment medium program it creates the file in a specific format as per your configuration. This file can be stored in your hard drive (C:) or in the SAP server based on the path given by you in the variant.
You can use T-code FDTA to view the file.
If it gets stored in C: you can just go to the directory and double click the file.
If it is stored in SAP server you can use transaction AL11 to view the file.
2. Inbound file - The electronic bank statements come in various formats. The most common formats are BAI in US, Multicash in Germany, MT940 in Europe. Each format has been defined separately, you can go to Googe and search for details about these format.
SAP has standard program which read these formats and post them to your General Ledger.
If you have more questions, please post them and I would try to answer.

How can I extract both my mp3 file and its associated .jpg out of itunes

Hi everybody,
I'm a DJ and once a month, I like to share a set of mine with my friends. For each set, I also make a dedicated flyer.
I usually put the recorded set in Itunes, then I add the flyers using the "Illustration" (I'm using a French version) tag.
Then, I drag the new file (both the .mp3 and .jpg) on a folder on my computer and I can see the flyers and not the normal Mac icon for music file.
I had always worked, but today I tried to do the same but it doesn't work anymore. In Itunes, my mp3 file contain the flyers, but when I drag it to another folder, the flyer is not there anymore.
What happened???
does anybody know a freeware to associate a mp3 with a .jpg?
Thanks for your help,
Have a nice day
Jean

Bonjour.
I'm not firm with the french iTunes but I'm sure its similar to all other iTunes in the world, except the language of the menus.
You can include the cover (Illustration) inside the music file. mp3, AAC or Lossless makes no difference.
To do so go to:
The song (or songs) by marking it (them) in the main iTunes window. Then right click mouse (or two fingers on touchpad) and choose "Information"
In the information window go to the tab called "cover"
Move the wanted picture via drag & drop into this window. The best format for such illustrations are 500 x 500 pixels. If yours are bigger then iTunes will resize it to fit.
Click on save
If you will change the cover for more than one file (song) you will be ask "you are sure to change all files"
Simply press ok
After that the cover will show up in iTunes and will be exported within the file if you pass the song to others..
There is no reason to place the cover / Illustration in the Music folder cause iTunes uses for imported covers the "Album Artwork" Folder in the Library.

QuickTime takes forever to open larger movie files and files over network

Quicktime 7.2 used to open files immediately, but now it stops responding for a couple minutes or more before finally opening movie files.
Any one else having this problem?

Worked for me as well. I had Perian already, but after downloading and installing the new version, Quicktime works perfectly now.
Many thanks!

Duplicate file and file directory

Currently using 37.0.2
Notice in my file directory I have two Mozilla Firefox folders.
One has April 2015 dates.
The other has February 2014 dates.
Can I safely delete the Feb 2014 folder and its sub-directories?
Thanks

There are also old Visual Studio 8 folders with a number appended in the screenshot.
Did you ever do a Windows System Restore?
Yes, you can remove that folder.
If you want to know what Firefox version it is then you can check the application.ini file in a text editor via "Open with".

Flash xml file and file size?

I have a flash animation that pulls in images using an xml
file. I was
wondering if the images must all load first? In other words,
the images
are timed to load at different times. I was thinking, when I
did this,
that the images would not be downloaded until they were
called but I am
starting to doubt this.
Anyone have any idea how these images are loading?
Basically, my main concern is that they are putting too much
load on the
homepage. I have a feeling I know what the answer is.
Thanks

whatever the size of your SWF is, is what is going to be
loaded when entering your homepage. Flash doesn't know what images
to load, until you make a call to load them. It will only load the
assets on the timeline, and anything set to export on the first
frame.

Different contrast with original HD files and files imported in Premiere Pro CS4

I'm experiencing a very strange problem. Not the first time though.
When I import files shot with reflex video cameras this is what happens:
It seems something like shadow/highlights feature in Photoshop, but I haven't done anything to have
such a huge difference.
When I import files shot with my Sony HVR Z1 regular videocamera nothing weird happens and everything
works perfectly.
Any ideas?
Thanks
Alessandro

I now use CS5 and I do not use a "reflex" camera... so this is only a GUESS
Does your timeline have red over the "reflex" video when you 1st import, and before you do any work?
If yes, that means you have a mismatch between your project and your video

WMV files and file extensions to upload in OLM

Can you upload .wmv files to be played in OLM? It plays from Windows Media Player in a stand alone mode.
What about pps. files? I saved a power point and uploaded it. It opened but it only showed the slides and I had to start it in MS PPT. So, I tried to save it in PPT Show and I get a bunch of java jibberish. Anyone have experience with either file type?
Edited by: user7120 on Sep 7, 2011 3:14 PM
Edited by: user7120 on Sep 7, 2011 3:14 PM

Anders,
Are you referring to the properties in the OLM setup? I have not tried to set it to display in a different window, but I will try. I created a new learning object and UPLOADED the video. When opening the file, I get a bunch of java language (jibberish) and the video does not show. Have you experienced that before?

Word 2004 - 2x click file and "File" and "Edit" menus transpose on menubar

Ive never seen this before, has anyone ? Didnt get a chance to verify which update the user's Word is at (ie, Get-Info on file Microsoft Component Plugin is at version 11.3.9)
Strangely, Excel and Powerpoint launch correctly....
Cheers

after some troubleshooting - this turned out to be an embedded macro causing this. The macro was built in to the normal.dot file which had been customized. Need to read up on how this works and how macros in the normal file can interact with files.

Distinguish between manually entered file and file uploaded by conversion

Hi ,
I am involved in a conversion wherein i have the requirement to get those file uploaded form front end.
Is there any distinguishing column to know as to whether the file loaded in fnd_lobs or fnd_documents_tl are from front end or through conversion.
Please let me know if any of you have a solution to it?
Thanks and Regards,
Amar Deep Gautam

You can consider using the upload_Date column.
OR
You can consider a naming convention for the file name (such as CONV_PO_TERMS.dat).
Sandeep Gandhi

Tar files and file associations

Similar Messages

Maybe you are looking for