Tarantella native client don`t printing with printer usb

tarantella native client don`t printing with printer usb

agreed with Wai on upgrading. The first test should be outside of SGD . . . does UNIX print to that USB printer? If not then chances are Tarantella 3.30 will not. If you upgrade to 4.31 you will need to first upgrade to 3.42 then to 4.20 before upgrading to 4.31. Under 4.31 we support PDF printing from UNIX servers. With PDF printing you should have no problem printing to a USB printer.

Similar Messages

  • HP laserjet 1200 using windows7, cabled to the printer with a usb to parallel adapter

    HP laserjet 1200 using windows7. My computer has USB ports, but no parallel port, so the computer is cabled to the printer with a usb to parallel adapter. Sometimes works fine, sometimes system states printer as ready, but will not print. Reboot hardware and on restart, I got one page to print. Next attempt to print puts the document in cue, but just sits there -- no error message. Finally, after multiple restarts, I got it to print (have no idea how), but now I had to print 20 pages one page at a time. It will not print more than one page, even if I select to print 20. Next time I start the computer I don't know if the printer will print. Do you need to use the same USB port each time, Or are the USB to parallel adapters undependable?
    This question was solved.
    View Solution.

    Hey renradd!
    Unfortunately, parallel to USB adapters can be undependable. Other than a new printer, I'm not sure what would provide you with a fix for this problem. You might try another adapter if you have one, but if that still doesn't work I would look into a printer that your computer could support.
    Hope this helps!
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8?

    I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8? Any ideas for a fix?

    iOS devices use AirPrint to connect to a supported printer. OS X will use Bonjour to locate and connect to the same printer.
    With the Epson connected to your wireless router, when you open Print & Scan and click the plus button to add, does the Epson appear in a small box with a heading of Nearby Printers?
    If not and a window appears showing Default, Fax, IP and Windows in the toolbar, do you see the Epson with the Default view selected?

  • Can't print with airport usb connection only

    i have spent the last 3 days searching for help to fix my problem - PLEASE HELP!!!
    using:
    imac osx 10.6.8
    canon image class mf8350cdn
    airport extreme base station
    I cannot seem to print wirelessly with my imac using just the USB connection on the airport router.  I can print with the printer locally when it's "hardwired" directly to a usb on the back of the imac.  I can print if i connect a cat5 network cable from the printer to the airport. i can print wirelessly with a PC when the printer is connected with a usb to the airport.  i just can't do this with my imac via the usb connection on the router.  my error message is a Canon CMFP Printer Driver telling me printer is not responding - check the power.....try sending again.
    I believe i have tried everything!!!  While i am newer to mac and not the greatest at networking, i have manipulated every setting to match up with all of the online help i can get (trying to not have to send this question!!) and no luck.
    i have deleted printers and jobs, reinstalled everything, i changed the cable, downloaded the latest drivers from canon and apple, i updated the firmware on the printer. i even reinstalled my osx and confirmed all is updated on my imac.
    i don't want to scan or fax this way - so that is not my issue -- it's just plain old printing using that usb port.
    i need all of my other ports on the airport for other things, so i cannot sacrific this one for printing - i just want to use the usb as my printer connection to print with all of the machines i have.
    hope my question makes sense and that someone will take the time to give a reply.
    thanks!!
    p.s. the closest discussion that matches my issue seems to be this one:
    https://discussions.apple.com/message/12367897#12367897
    but, i still can't seem to get there..........

    The most comprehensive set of troubleshooting instructions for printing problems involving Airport printers is found at:
    http://docs.info.apple.com/article.html?artnum=107418
    It is possible your printer simply cannot be made to work in this manner, and is more often than not a problem with multifunction printers.

  • Printing with a USB printer using Airport Extreme and Vista

    I have a airport extreme and it prints fine with all of my Macs.
    I bought a VAIO installed with Vista and the lastest service pack. Here is what I have done
    * Installed Bonjour Printing software on the Windows Machine
    * Installed the print drivers on the Windows Machine
    * Bonjour finds the printer and driver without any problem
    * When I test the printer will print either one page or half of one page and then I get an error message.
    * I enabled the UDP 5353 port in the Firewall
    The printer is a Epson Photo R220
    I have no problems with the Macintosh works great and I have no problems with the Windows machine connecting to the Airport for internet usage.
    If anyone out there has a solution I would very appreciative.
    Thanks

    No help from the forum. I used Bonjour for Windows.

  • Printing with print report.vi

    I am using windows 2000, LabVIEW run time engine and am having problems with printing. When one users logs onto windows, runs the program he is able to print the results. However if someone else logs onto windows they are unable to print. I am just using the report generation vi's that come with LabVIEW. The print report .vi is programmed to use the default printer. Has anyone else had similar problems?

    I have never heard of this myself, although I have heard of general issues with print report.vi. You say that your VI prints fine when "one user logs onto windows." Then it has problems with "someone else logs onto windows." What exactly does happen? Does an error occur? Does it not print at all? Let me know when you get a chance.
    J.R. Allen

  • New SCCM clients don't communicate with SCCM servers

    Hi,
    I've got an infrastructure of 4 SCCM 2012 R2 servers, 1 Primary in US, 3 secondary in Europe, Asia and US again.
    As I discovered, European clients visible in SCCM console as "active" in Client Activity are discussing with the SCCM. All inactives or new clients are detected but don't receive any policies or can't be remoted by SCCM (RDP is working).
    I checked the log files, the boundaries, the certificates, the sites, MPs, client settings, DNS and I don't see any problems.
    We don't have firewall between sites and there is a GPO disabling the firewall on clients, so I don't believe it could be that issue.
    I tried to Telnet the SCCM server from a "blank" client on port 10123 and it's reachable.
    as far as I can see, other sites are fine, but still waiting feedback from local IT colleagues.
    what else could I try?
    thanks for helping.

    This typically means the client's are NOT falling within the boundaries of you site. AKA, the IP range not added to CM12, DHCP scopes changed, AD subnet changed, etc.
    I disagree. Boundaries do not come into play in that scenario. The client (once assigned to a site! And that can also be done manually without any boundaries) will happily retrieve policies even without any boundaries defined. 
    I agree that once they are assigned to a site they don't need any boundaries but are the clients assigned? Are they using auto assigned them?  If you are using auto assigned and the boundaries are wrong then they will only see the two items.
    So the question is are they assigned to the site? (Just because they show up within the console do not mean that they are assigned)
    IMO the problem sound like they are using auto assignment, hence the question about boundaries.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • How to delay printing with print-on-release ?

    Hello friends,
    I have enabled WM transactions, as well as Printing, upon Release of Production Order.   My print program takes the WM Transfer Order details and prints it on Pick List.   However, about 50% of the time, printing starts before TO creation is complete - so the printout does not contain the TO details.
    I need your help to solve the above situation - how can we delay the printing so that TO creation gets sufficient time to complete - or to do something that printing does not starts until TO creation is complete.
    - Chetan

    Hi,
    To my knowledge, In standard SAP, I don't think we can control the timing when you have settings for print-on-release.
    But this can be acheived through work around.
    In the print program (that you have assigned in OPK8) make changes in the coding by adding conditons as per your requirement and to trigger the print only if your conditions are met. However, this will happen only upon release. Try this with you help from ABAP.

  • Color Laserjet 2605dn printer with printing envelopes correctly

    I am having problems with my HP Color Laserjet computer which is not printing envelopes from the computer which has Windows 8.1 installed on it. It will print out letters just fine now, but had problems with that previously, using WordPerfect Suite. The printer is a Color Laserjet 2605dn, which is connected to my home network. The same problem seem to be happening on my mini laptop which is running Windows XP.  I just fixed the printing problem on my windows 7 computer and had to print my envelopes using it. The HP Mini Laptop use to print out my envelopes just fine previously, but have the same problem. On the Pavillion Sleekbook, which is the newest I have the special print software from HP which lets me print paperwork where the others are not using it. I would appreciate any help with this problem. The setup isn't correct and the envelopes don't print out correctly like they did previously.

    Hi semco72057,
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Printing with print() and table making

    [code
    import java.awt.*;
    import java.awt.event.*;
    import java.util.*;
    public class CarLoan {
    public static double p(double d, double i, double t) {
    return (d * (i / 12) * Math.pow( (1+(i/12)), t)) / (Math.pow((1+(i/12)), t) - 1);
    //computes balance b(m) at m months for simple interest loan
    // of d and annual interest i term of t months
    public static double b(double m, double d, double i, double t) {
    return (d * Math.pow((1+(i/12)), m)) - p(d,i,t) * (Math.pow((1+(i/12)), m) -1) / (i/12);
    public static double f(double m, double d, double i, double t) {
    return d - p(d,i,t) * m + c(m,d,i,t) * (m * (2 * t - m + 1) / (t * (t +1)));
    public static double c(double m, double d, double i, double t) {
    return d - p(d,i,t) * (m -1) + b(m,d,i,t);
    public static void main(String[] args) {
    System.out.println("Car Loan Calculator");
    Scanner stdin = new Scanner(System.in);
    System.out.println("Enter your amount to finance:");
    double d = stdin.nextDouble();
    System.out.println("Enter your annual interest rate (in decimals,ie 0.07 is 7%): ");
    double i = stdin.nextDouble();
    System.out.println("Enter your term (in months): ");
    double t = stdin.nextDouble();
    System.out.println();
    for(double m = 0;m <= t; m++) {
    double balanceSimple = b(m,d,i,t);
    double balancePrecomp = f(m,d,i,t);
    double monthlyPayment = p(d,i,t);
    double totalInterest = c(m,d,i,t);
    System.out.printf("%4d %4f\n",m , balanceSimple);
    //Enter totals in this line here
    //System.out.println("Totals " +
    Can someone help me print a table with printf() ? Or if you know another way to do it or HOW to do it, that'd help, thanks

    No need to: there are no formatting possibilities
    available using a PrintStream.
    There's just a bunch of overloaded methods for all
    the primitives and the
    print[ln](Object arg) method simply uses the
    toString() method on
    the object argument ...
    OTOH I don't like the printf() method much
    either ... I know what hoops the
    C version has to go through to get the job done. IMHO
    it doesn't justify the
    utility value in Java; but that's just me ;-)Thanks for the input.
    kind regards,And to you.
    Jos� {�                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Adobe Reader printer output not printing with printer

    Hi all,
    I've downloaded the current Adobe Reader 9.3 and have not been able to print. It sends the file to my print spooler where I check on it and see that the job is tagged with an error. I've just got the 10.6.3 but this also occurred under 10.6.2 Mac OS. I posted a bug alert to Adobe. My printer is a Canon. I sometimes choose to use Adobe Reader in leu of Preview when filling out a form. Personal choice at this point, but in the past, only Adobe preserved the correct font and all of the form.
    Just wondering if anyone else has had this issue.
    Not sure if this is a printer driver issue or a output error. But the printer works with everything else.
    Linc

    I have a similar problem that my mac mini running 10.6.3 with Adobe Reader 9.3.2. I print using a shared printer HP F2280 from iMac running 10.5.8 wireless airport.
    When I print PDF from my mac mini, the share printer can only print a few lines and that stop. There is no error in the printer queue. It say accept print file.
    I'm using preview to print PDF right now before solution come out.

  • New Apple Convert - Printing With Print Server

    I am having trouble printing.
    I just bought my first Apple iBook G4 using Mac OSX 10.4.6. I have a Netgear Wireless Router with a Netgear PS121 Print Server plugged into one of the router ports. The print server is connected to my Brother MFC9700 Laser Printer.
    I went through the process of adding the printer. I used the following settings:
    IP Printer
    Protocol: IPP
    Address: The IP address of the print server
    Queue: Left blank
    Name: Laser
    Location: Left blank
    Print Using: Brother MFC-9700 CUPS v1.1
    When I attempt to print (from .Mac Word) the printer box shows I am connected to 192.168.0.3 (IP of the Print Server) and the activity indicator (looks like a sideways barber shop pole) is moving but nothing happens on my printer.
    Can someone please advise me?
    Your help is greatly appreciated.
    Mark Ehrmann
    iBook G4   Mac OS X (10.4.6)  

    Try using the following URL instead
    192.168.0.3/P1
    The P1 is important.
    Or try this instead
    Start Printer Setup Utility
    Click Add
    Hold down the option key and click More Printers
    Select Advanced from the drop down menu.
    Select LPD/LPR Host or Printer
    Enter this as the Device URI
    lpd://192.168.0.3/P1
    The P1 is important.
    Note though that your Brother printer is not on the Netgear Compatibility List.
    iFelix

  • Can't Line up prints - with printer

    Going crazy here trying to print from Lightroom.......all is ok with Windows priting to my Epson 1400. But when I try from Lightroom3 no luck. Tried 5 x 7 template, set printer to 5 x 7 and i get a 1/3 or one eye..... it's like it's trying to print to a much larger sheet of photo papar than I have loaded ( the 5 x 7)......any one else in the same boat.... or any ideas on how to correct ???
    Thanks.!!

    Yea sure is set to 5 x 7..... but this applys to al sizes.
    On the LR3 screen the photo is centered on the layout screen, the 5 x7 (or what ever size) is showing on the top of the LR3 screen. But the output is only a part of the photo........
    Tanks again all.......

  • Printing with Print Shop 23.1

    I have been using Print Shop 23.1 and all of a sudden I am unable to print #10 envelopes.  I received an email from the company that makes Print Shop and they said that Print Shop didn't always work well with HP printers and that I would have to reset  some printer settings.  This is ludicrous, as it worked fine when I first loaded it onto my computer.  I was wonder what software for printing envelopes, letterheads, etc, would work with my HP Photosmart 6520 without having to redo the settings everytime I print a project?
    Please advise.

    Hi mucksiegooma,
    I understand the you are now unable to print envelopes with the Print Shop 23.1 program. I can suggest  Uninstalling the Printer Software and reinstall the HP Photosmart 6520 e-All-in-One Printer Drivers. You will want to choose the full feature software and drivers from Driver - Product Installation Software.
    I hope this helps, let me know.
    Thank you,
    I worked on behalf of HP.

  • Cannot print with "Printer manages colors"

    I have CS5 installed on a brand new 27" iMac (running 10.6.7).  When trying to print in Photoshop, nothing happens if I hit print.  Nothing happens if I hit Print Settings.  It doesn't matter which printer I have selected.  If I change to "Photoshop manages colors" it works, but that is not really a solution.
    I have tried:
    A different user
    Resetting the print system
    Deleting preferences
    Reinstalling
    Running Photoshop in 32-bit mode
    Booting the computer with the 32-bit kernel
    Printing works in other programs, and in Photoshop CS3.

    Is the D92 a PostScript Printer? If so, at the moment it doesn't matter whether you choose Generic or Epson... Generic should print to any Ps Printer, you just won't have Brand/Model specific features.
    In Printer Setup Utility, have you looked under all the catagories like IP Printer, Appletalk, etc.?

Maybe you are looking for