Target costs is showing as ZERO for one material in KKBC_ORD

Hi,
When i execute KKBC_ORD,It is showing the Total Target Costs as ZERO for one material.Cost estimate was already executed for that material.I couldnot find out the problem for this issue.
Kindly help me to find why it is giving the ZERO value for this Total Target Costs in KKBC_ORD transaction.
It would be a great help if any one helps me...
Thanks
Supriya

Dear,
Have you done the GR final DEV for order?
You need to do the variance calculation in KKS2, then when you save the variance, the target cost is calculated.
Target cost appear after GR. I think you are checking in CO03GotoCost--Analyasis.
Go to t.code OKEV.Select Controlling Area XXX and create Plan / Target version
Go to transaction OKV6 these settings control what values are used to update the target costs.
Target Costs=Actual Quantitiy X the Standard Cost Estimate Price..
Regards,
R.Brahmankar

Similar Messages

OEM showing 3 entries for one host

I have recently setup the OEM and dnt have much idea abt how it works.
But the main webpage is showing three entries for one particular host and the status of one out of them is pending. How can i remove two entries so that it becomes consistent.
saps.

[email protected] wrote:
I have recently setup the OEM and dnt have much idea abt how it works.
But the main webpage is showing three entries for one particular host and the status of one out of them is pending. How can i remove two entries so that it becomes consistent.
saps.3 entries for one host? What have you configured, Database Console or Grid Console?
HTH
Aman....

Moving average price (MAP) became Zero(0) for one material

Gurus,
Please tell me what could set MAP to zero for a material?
Thanks,
Kishore

HI,
Please check whether any body has transferred material from on location to another free of charge ot at the price 0.01,
as the MAP will be become zero by two reasons
1) any user have made the GR or Invoice for that material for at 0.01 price.In case of several invoices with too low a price the total value can reduce to such an extent that the MAP goes towards zero
2) or you may not have any stock in your location's.
please check the MB52 repost whether any body did for 0.01 price for that material , you can increase you MAP with Transactions MR21/MR22 ,increase the price/stock value again - if required.
Furthermore, you can define tolerance limits in the Customizing for the MAP price variance (Transaction OMC0, tolerance key VP) this is for your precautions in future.
PLease see the previosu forum post on MAP they might help you in your scenario.
Regards,
Ninad Kshirsagar

Two prices for one material in sales order according condition type

Hi,
I configure the condition type according to following condition record:
Plant/ Sales Organization/ Distribution channel/ Material / Customer
(because system should calculate two prices for one material in two plants)
In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing procedure and to have a price for material, user should update the price in the price condition in sales order.
It is so difficult for user to update one by one, because there are several sales orders which need to update.
Is it any way to solve this problem?
Thanks,

> In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing
Hi,
Why to let the user press Enter button before entering plant value Obviously, system will give error, because it doesnt get all the required value based on which you have maintained condition records.
Ask the user to enter all the value at item level otherwise you will have go for the option that you are doing currently.
It is said prevention is better than cure
Hope you get some inputs
regards,
Sagar

Multiple Posting change notice created for one material document

Hi All,
The scenario is that the user needs to transfer material from unrestricted to quality stock type. while doing so the storage type is different than the actual storage type for the material. Meaning if the material is normally stored in high rack storage type, when it is found that the material is damaged or expired it need to be moved to the quality storage type. For this the user will first create material document in IM with movement type 322 transferring material from unrestricted stock to qualtiy stock. A PCN will be created in back ground which will in turn be converted manually by the user to a TO. while doing so the user will pick the quant manually from the required storage type and select the destination storage type as the quality or quanranntine area.
The issue here is that system creates one PCN for each material document line item. The requirement is that the system should create only one PCN with multiple lines for one Material document.
The setting in the movememnt type clearly says that it will behave as it is behaving.
Is there any other way or setting by which we can create one PCN with multiple line items for a material document.
Would look forward to your replies.
Regards,
Jeetendra

Thanks and Sorry for the delayed reply. We have now convinced the users that the system behaviour is standard and we cannot change the same.
To your question about the need to have one PCN with multiple lines please note that the setup is such that when material document is created for transferring material from unrestricted to quality and vice versa this document is created with multiple materials in one go. Now when the PCN is to be converted to TO then the user ends up in creating number of TO's equal to the number of lines in the Material Document. We wanted to avoid this and hence this was posted in SDN.

Production order from sales order with multiple line item(for one material)

Dear Gurus,
I am working in MTO scenarios. If there is several line item in a sales order for one material, multiple production order( same as no. of sales order line item) is getting created against each of the line item.My requirement is,since the material code is same in each line item and sales order is one, one production order should be generated for all line item. please tell me how to do it.
(Here for one material, multiple line item is required for some specific reason)
Regards
Rajib Pathak

Hi,
This is not possible.
In Std SAP will create one production order for one sales order. The stock is also allocated to thet particular sales order only. Because each and every sales order may vary in any one of the parameters. Considering this, SAP has designed like this.
Regards,
V. Suresh

Auto To working for one material and not working for other material

Hi,
Hope everybody is doing fine.
I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
I didn't setup the back ground processing job. Is that is affecting it?
thanks for any help.
regrads,
KHAN

Thnaks,
You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
Appreciate your time charlie

The fax confirmation report shows all zeros for officejet 6600 printer

the fax confirmation page shows all zeors for date and time. How do I set the printer so it prints the correct date and time?

Hi CJChristian,
Welcome to the HP Forums!
I understand that your confirmation date and time fields are all zeroes with your HP Officejet 6600, and I am happy to help you!
Please take a look through this guide. Setting Up the Printer Hardware for HP Officejet 6600 and 6700 Premium H711n e-All-in-One Printers. Select the Officejet 6600, and look for Step Seven Set the Date and time.
Also this guide may help too. Setting up the HP All-in-One to Send and Receive Faxes.
Hope these guides are useful for you, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Two renewal orders and charges showing every month for one account and same renewal package, WHY

Why am I charged twice with two different orders every month for one package of 800 mins. Are they giving me 1600 minutes! I need only 800 minutes please, so please refund these extra order charges please. I just noticed this thing month today and on checking order history find that same practice has been followed for all my previous months transcations!

Hello and welcome to the Skype Community.
The duplicate charge has been reversed and the funds will be returned to you.

Threshold values are not showing in zeros and ones

Hi guys
I am thresholding an 16 bit unsinged image . There are few problem I am facing
1) when I look at values over the threshold images those are not in zeros and ones
2) How to change color of threshold image, by default it is red and black
I will appreciate help from you guys.
Solved!
Go to Solution.
Attachments:
Thresh_prob.jpg ‏52 KB

Like this

Fetch New Data shows two entries for one account

I have on a variety of accounts on my iPhone and my iPad: an iCloud, an Exchange, a IMAP, and a couple of Gmail accounts.
Earlier this week, I noticed that in the "Fetch New Data" setting (Settings > Mail, Contacts, Calendar > Fetch New Data), there are TWO entries for one of the Gmail accounts.
One entry lists "Mail and Calendars." I use this for this particular Gmail account. I have these selected in the "Accounts" section of Settings > Mail, Contacts, Calendar.
The other entry lists "Contacts and Calendars." I don't sync Contacts, but I do sync Calendars. Why is it listed twice?
I tried deleting
the offending Gmail account, but it did not delete the duplicate entries.
erasing all settings
all of my accounts, including iCloud, IMAP, and other accounts.
The ghost account is still there, fetching calendars and contacts.
Has anyone else seen this behavior?
I considered erasing settings and content, but that seems pretty extreme for something that might not be that big of an issue.

Exact same problem here!!! Iphone 5s with IOS 7.0.3, using Gmail among other email providers.
So it is definately a bug - the "fetch new data ghost account". I hope it will be solved in a newer release. In the meantime, I switched the ghost account to "manual" so it shouldn't interfere...

Two profit centers in same plant for one material

Dear All
We have this request from a customer.
There is a material in 1 plant but need to track that same materials in 2 different cost elements depending on where these are used (e.g. for sales will be booked to profit center 1 and demo will be booked to profit center 2)
Now we can partially achieve this by splitting them into 2 storage locations however this will only give a report on quantity and not separate valuation since 1 material can only have 1 profit center per plant. So we can know there are for example 4 sales item in sales storage location and 2 item in demo storage location but we will not know their price valuation as it will show 1 combined value for all 6, and we cannot assume valuation per item to be total divided by 6 because the value for the sales item and demo item need to be different.
Is there a way to achieve this?
We could copy the material to another material with different material number but this is not ideal since it will create problems at the backend when updating material data and also causes duplication which we want to avoid.
Any suggestions on how this can be achieved -- e.g. I am sure most companies have demo units which are separate from delivery units how is this scenario managed in those companies?
Regards
Anant

Hi
Use split valuation. Using Split valuation one material can have multiple valuation prices. In your case you can create two Valuation types (Demo and Sale item) for valuation category say XYZ. Then you can manage different price for Demo and Sale item even if the material is same.
Read below example: If you have same material grade A and grade B. Grade A is $100/Kg and Grade B is $80/Kg. This kind of scenario is possible by using Split Valuation.
Regards,
J.Sankar

MRP is not working for one material

Hello,
I've run MRP without problems, but now I have a problem with one material. It is strange because if I copy that material with MM01, create the BOM and the run the MRP, everything works fine with the new material, but not with the old one.
Any idea why it could be not working, while the copy works perfectly?

hi
First of all check have u maintained MRP parameters correctly
( MRP type etc.)
Though u have created BOM but if parent material has no requirement then it will not create any requirement for ur created material so check whether parent material is applicable for MRP or Not
Vishal...

Is production order for one material only?

Hello
Is it true that one material can be specified in production order as the output (material to be produced)?
and what is combined order? why the output material in combined order can be different from output materials in subordinate orders?
Thanks

Dear,
In Combination order you can combine the serval planned, production order to one new combine order. This functionality is available in IS mill.
For more details refer this link,
/people/rupesh.brahmankar3/blog/2009/08/03/combining-production-and-process-orders-with-batch-production
Regards,
R.Brahmankar

Can we maintain two values for one material a plant without split valuation

Hello Guru's,
We have a situation, we use MOVING AVERAGE PRICE in accounting view 1. Without split valuation.
The actual issue is, we receive, damaged material from a customer with a "0" value, and we send the material as it is, to a vendor with a "0" value.
The vendor, sends us back the repaired material with a value, say "10" (and this keeps changing).
Is it possible, to have Non Valuated Stock and Valuated Stock within the same Plant, for Material "A".
And it shouldn't affect the MAP. Also, we don't want to have Split Valuation.
Please help.
Kashi

if i am getting your scenrio correctly then i will suggets u to maintian the material master with moving avreage price control indicator then
case1> gr from customer at o rs
use the tcode mb1c and movement type 511
as it is evaluated at MAP hence only material document genrated no accounting document
well tried to realize your scenerio but it is not possible to do that
as MAP is going to get effected as a result of valuated good recipet
u need to go for separate material code then transfer good from non valuated to valuated one using tcode mb1b and movement type 309 or use split valuation

Target costs is showing as ZERO for one material in KKBC_ORD

Similar Messages

Maybe you are looking for