Target Dates for Switchover to 21CN
Just thought I'd resuscitate a question I posed a few months back on the old forum - but which never got answered.
The target dates for switchover to 21CN were announced, as far as I can see, back in October 2006. These suggested that my own exchange would be upgraded in Q4 2009.
As far as I know, it hasn't been upgraded and we have gone past the proposed date.
Has BT updated these lists since 2006 and if so, where are they available?
"To forbid us anything is to make us have a mind for it."
-- Michel de Montaigne, Essays, 1559
Hi Guys
The exchanges upgrade dates arn't really something we have control over as these are all handled through Openreach and we generally have access to the same target dates that you can see.
The probem really is that they are target dates and will be subject to change so I cant really shed much light on specifics however I do know that they plan to reach 2.5m homes by late summer 2010, 4m homes by the end of 2010 and at least 10m by the summer of 2012 with the new BT Infinity broadband.
I hope this helps.
Cheers
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
Similar Messages
-
Design of Cube to Store SEM Target Data - for HR
Hello,
I am in the process of completing a Scorecard and Management Cockpit for the HR function at my company. Currently, the most perplexing piece is how to handle targets. I know they can be entered via BPS, have to be stored in a BW InfoProvider, etc. However, the actual design and requirements of the cube seem daunting at this point.
Given the way that HR data is sliced and diced, it looks like we'd have to maintain millions of targets...
These are 6 of the ways we look at enrollment numbers:
Sub-Business Unit A, B, C, D, E, F..
Function A, B, C, D, E, F..
Band A, B, C, D, E, F..
Rating A, B, C, D
Gender A, B, C
Country A, B, C, D, E, F..
etc.
Having to define a target for each slice of these, across each possibility of characteristic combinations (and this is a partial listing) is probably not feasible...
Am I looking at this correctly?
Is there something I'm missing, or perhaps a better way to do this?
EXAMPLE:
For financial data, if you want to store targets, the table needn't be very large -- the measures you want to track against, by the level of detail you want to see... (i.e. cost center, etc.) Let's say there are 100 cost centers in the company, and you want to see Net Sales. You'd end up with 100 target values: Net Sales for each cost center. If you want to also see Gross Sales and Revenues, then it adds another line for each cost center/site. In this example, that would be 300 entries -- 100 cost center values for Net Sales, 100 for Gross Sales, and 100 for Revenues. (So it's A * 3.)
However, with HR data, say we want to track the Number of Employees. If we want to see the Number of Employees by Country, then it's basically flat. For the sake of simplicity, let's say we have 100 countries. Recording target values for Number of Employees by Country would result in 100 fields for entry. However, if we wanted to add dimensions for Band/Position Level (10), and Employee Rating (4), the number of possibilities grows practically exponentially. These dimensions are related - there are instances where we would want to see the Number of Employees in the US, for a Band of 4, and Employee Rating of 3. It's no longer A + B + C. Rather, it becomes A * B * C. In this simple example, the total is 100 x 10 x 4 = 4000.
The comparison to the financial example is that you wouldn't want to see Gross Sales by Net Sales. It doesn't make sense. However, in the master data intensive world of HR, you do want to slice and dice within/across dimensions. The cube would be the same size as the existing one for actuals - and we would have to populate it at the most granular level for each "piece" or possible way we would want to slice and dice the data, correct?
Does this make sense?
Is there an easier way to do this?
Is there some sort of Aggregate way to store these kinds of targets?
Any insight would be greatly appreciated.
Thanks,
Ericakglad, thanks for helping.
basically, i am a newbie and i'm not clear on your answer . if evt.currentTarget is better, I would like to use the best method, so thanks. i'm trying to get my head around what's going on here in the code. i get that actionscript is storing a "reference" to the object but I don't get why I can't put that reference (which is the name of the movieclip on the stage I wish to apply filters to, i.e. mc0) into a string variable (whichThumb) and then use that string variable to apply the filter (whichThumb.filters=[ds];)
on one hand, i'm getting error that says "possibly undefined property filters thru a ref with string" which I don't get because the filters are defined outside of the function and are called intially in the load function with no problem. and on the other hand, i am getting another error saying there is a "migraiton issue" with my string not being a dynamic class. do i need to make the var whichThumb another type other than string? if so, what type. maybe that will also solve the "undefined property" issue as well.
still learning, Thanks for help! -
Debuging mapping - error : Could not find test data for target operators ?
Hello, Please help me.
I use Oracle Warehouse Builder 10gR2.
I created a cube with two dimensions.
I debugged the mappings of these two dimensions then viewed their data after deployment.
I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
But the error is here: Could not find test data for target operators. Why ??
How to configure or explain to owb that the target operator do not have test data ????
I need your help.
thank you in advance.Sorry, I can not understand your approach ?
I explain you in detail : I work in ROLAP.
I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
thank you for help. -
Update Key for Target Data Store
Hi all.
I have a little problem with a data integration scneario.
We have Progress as a target database for an ETL interface. The data structure is very old, and the tables does not have primary keys. It's not a good idea to create physical constraints for this old structure right now.
In order to use this database as the target I need to provide an update key for the tables. Since I don't have physical primary keys, I'd like to know if there's a way to provide only a "logical" update key for the purposes of the ETL.
Thanks
DenisHi,
A/ First solution:
To create one or more logical key:
1/ In constraint view of your datastore, click Add a key
2/ In the box, give a name for your key
3/ In columns, choice columns for your key
To use it: in your interface, click on the target datastore and choice your key inthe datastore properties.
B/ Second solution
Directly in your interface, click on your column. In properties, click on "Incremental key". The problem is that this key is specific to this interface.
MA -
Cannot provide connect data for database target system CONFIG_DB
Hello,
I'm trying to install SP22 in NW04 but I'm getting an error on step 11 Deploy JDDI
Cannot provide connect data for database target system "CONFIG_DB".
Cannot connect to database: Cannot create class loaders for DB target system CONFIG_DB.
ERROR 2008-10-01 17:51:09
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-10-01 17:51:09 [iaxxinscbk.cpp:289]
abortInstallation
MUT-02041 SDM call of deploySdaList ends with returncode 4. See output of logfile C:\Program Files\sapinst_instdir\PATCH\MSS\callSdmViaSapinst.log.
callSdmViaSapinst.log:
com.sap.sdm.apiint.serverext.servertype.TargetServiceException: Cannot provide connect data for database target system "CONFIG_DB".
Additional error message is:
com.sap.sdm.serverext.servertype.dbsc.DatabaseConnectException: Cannot connect to database: Cannot create class loaders for DB target system CONFIG_DB.
Additional error message is:
com.sap.sdm.util.classloaders.SDMClassLoaderException: Cannot create class loader for component com.sap.sdm.serverext.servertype.dbsc.SERVEREXT_DBSC_EXTERN(CONFIG_DB): Referenced loader #0 for component com.sap.sdm.serverext.servertype.dbsc.JDBC_DRIVER(D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\base.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\util.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\spy.jar) is not available.
Additional error message is:
com.sap.sdm.util.classloaders.SDMClassLoaderException: Cannot create class loader for component com.sap.sdm.serverext.servertype.dbsc.JDBC_DRIVER(D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\base.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\util.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\spy.jar).
Additional error message is:
com.sap.sdm.util.classloaders.SDMClassLoaderException: Cannot create class loader instance: Jar file #1 cannot be read: D:\usr\sap\WDA\DVEBMGS00\j2ee\jdbc\base.jar
Oct 1, 2008 5:51:08 PM Info: Summarizing the deployment results:
Oct 1, 2008 5:51:08 PM Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\SYNCLOG.SDA
Oct 1, 2008 5:51:08 PM Error: Aborted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\J2EE_JDDSCHEMA.SDA
Oct 1, 2008 5:51:08 PM Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\COM.SAP.SECURITY.DBSCHEMA.SDA
Oct 1, 2008 5:51:08 PM Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\XML_DAS_SCHEMA.SDA
Oct 1, 2008 5:51:08 PM Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\JMS_JDDSCHEMA.SDA
Oct 1, 2008 5:51:08 PM Error: Processing error. Return code: 4
the spy.jar was there but some how it got deleted.
Any ideas?
ThanksFor others who may be facing the same problem and would like to have a permanent fix, you can download the largest JDBC drivers from http://service.sap.com/msplatforms and refer to note 639702 and if your system is NW7.0 with EHP1 or SR3, you should also refer to note 1109274.
-
What are all the Standard Data targets&Data source for Warehouse management
Hi,
What are all the Standard Data targets & Data source for Warehouse management.
Thanks,
Ahmed.HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra -
What are all the Standard Data targets&Data source for Transportation Manag
Hi,
What are all the Standard Data targets & Data source for Transportation Management.
Thanks,
Ahmed.HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra -
Using Airport Time Capsule as target/workplace for a Data Rescue III type software
I need to recover data from a 'bad' disk on a Macbook anno 2007. My idea is to mount the drive on a Macbook Air using target disk mode and a thunderbolt/Firewire connection. The mounting goes fine but copying the data leads to a hanging Mac Air. So now I put all hope on a Data Rescue type software in that such software will circumvent the hanging issue! Problem is that the Mac Air don't have enough memory to store the hopefully recovered data. Essentially, I have no proper 'target disk' for the recovered data and need to buy one (as well as buying the rescue/recovery software).
So, can I use a Airport Time Capsule as target/workplace for a Data Rescue type software on my Mac Air? Is this a proper mountable hard drive?
Thanks,
RANo, it is better to get a USB drive. You can mount a TC drive but it is just as likely to unmount itself half way through.. keep networks out of the already many problems you have.
-
Set target app for Data Transfer API
I am developing an app in which I need to implement sharing to facebook ,Twitter,LinkedIn and Google Plus. We do not have proper easy going SDKs available for all these services. So I tried using Data Transfer API from microsoft but I want to set the target
app for this such that when the publishing gets done it returns to my app. Is it possible? Can somebody help?No it's not possible with the datatransfer api. You set some content you want to share and the user neeed to select the target app
Microsoft Certified Solutions Developer - Windows Store Apps Using C# -
CATS - Data Transfer to Target Components via CATA - Error "No Data for Trf
Hello
I am recording hours via CAT2 on Network Activity. These hours are then approved.
However, when I run CATA to transfer the hours to CO and PS, I get popup information "No Data for Transfer".
When i proceed further , i get another popup saying all records were read and saved successfully, and no. of confirmations generated.
However, when i run CJI3, I do not see any Actual cost line items.
Please help
JGHello Joy,
(1) Perhaps you have on your profile on CAC1, the "Immediate Transfer to HR" flag set.
This way you have the "Release on Saving" flag set, all the time you save data, it gets transferred directly.
(2) But, I see that you are having the issue with the CO and PS, so I highly suggest you to check on if the data is on the interface tables.
a. First you should make sure that the data exists on CATSDB with Status 30.
b. Then, you should check the data on CATSPS (Interface table for PS) and CATSCO( interface table for CO).
c. If you don't have the data on these tables there should be no record after all to transfer.
Regards,
Bentow. -
Questions regarding TARGET DATA of a selection set and usage of extracts
1. In iSetup Users Guide (121azug.pdf), pg5-4, under 'Viewing a Selection Set',
it has the following lines:
Supports Update: If the data object updates the target data during load,
then the Support Update flag appears
There is no explanation on "target data" in earlier section.
Can someone explain what this target data is?
2. In iSetup Users Guide (121azug.pdf), refer to the image on pg5-14, there is a download link
in order to download extract. What is the downloaded extract for? Is there any documents
explaining how to use the downloaded extracts? I am thinking that this downloaded extract
can be used to upload in other env but I am not sure how to use these.
Any advise?
Thanks.You are on the right track!
+--the entire iTunes folder found in My Music+
This contains the itunes library database files (iTunes Library.itl which has metadata on ratings, play counts) and all the itunes library content files (Artist/Album, movies, etc.)
The lyrics are inside each songs' file.
The Artwork should also be in this folder.
+-User Name\Application Data\Apple Computer+
+-User Name\Local Settings\Apple Computer+
These include the backups you need for the ipod and apps data.
You don't need to deauthorize if you are simply reinstalling itunes. You only need to deauthorize if you are reinstalling Windows itself.
+--Can I copy the iTunes folder from the external HDD and paste it back into the same location after I recover my laptop+
Yes
+if the version of iTunes is slightly different (I have 10.1.0.54)?+
If the new version is at least 10.1.0.54
It won't work to go backwards to an older version such as v9.0 -
Actual vs target report for sd module
if any having actual vs target report for sd module pls forward me..
my requirement is i would like to find the monthwise core and monthwise actual sales totals and rebate for the particular product ..How are you doing the data entry for target (or budget) ? Is it thru CO module ? Have you activated CO-PA ?
-
Report to show data for specific MD
Hello,
I am racking my brain thinking of a way to do this...
I have some specific masterdata for example Product 1,2,3...10 and i also have a cube where any Actual & target sales are recorded
I need a way of producing a report whereby the report shows ALL products and any data relevant from the cube...
ie if there is a product where there is no data for actuals or targets then the report will still show a line but with blanks in the KF.
(right now, if there are no actuals or targets, that product is ommited from the report, I need to be able to see that product and the fact that there is no data for it in the cube)
any ideas?
thanks
BW_ERHi,
There are multiple ways of achieving what you want.
1) You can do as proposed and create an infoset and then you can use and outer join on the master data. This way all master data records are displayed independently of whether they have any transactions in the infocube when you create a query
2) You can create a multiprovider on your master data and your infocube and then in the mapping of the fields, specify that you want the e.g. 0MATERIAL to come from your master data
Hth,
Jacob -
Ensure field sequence is correct for data for mutiple source structure
Hi,
I'm using LSMW with IDOC message type 'FIDCC2' Basic type 'FIDCCP02'.
I'm getting error that packed fields are not permitted.
I'm getting Ensure field sequence is correct for data for mutiple source structures.
Source Structures
HEADER_STRUCT G/L Account Document Header
LINE_STRUCT G/L Account Document Line
Source Fields
HEADER_STRUCT G/L Account Document Header
BKTXT C(025) Document Header Text
BLART C(002) Document Type
BLDAT DYMD(008) Document Date
BUDAT DYMD(008) Posting Date
KURSF C(009) Exchange rate
WAERS C(005) Currency
WWERT DYMD(008) Translation Date
XBLNR C(016) Reference
LINE_STRUCT G/L Account Document Line
AUFNR C(012) Order
HKONT C(010) G/L Account
KOSTL C(010) Cost Center
MEINS C(003) Base Unit of Measure
MENGE C(013) Quantity
PRCTR C(010) Profit Center
SGTXT C(050) Text
SHKZG C(001) Debit/Credit Ind.
WRBTR AMT3(013) Amount
I have changed PAC3 field for caracters fields of same length to avoid erreur message of no packed fields allowed.
Structure Relations
E1FIKPF FI Document Header (BKPF) <<<< HEADER_STRUCT G/L Account Document Header
Select Target Structure E1FIKPF .
E1FISEG FI Document Item (BSEG) <<<< LINE_STRUCT G/L Account Document Line
E1FISE2 FI Document Item, Second Part of E1FISEG (BSEG)
E1FINBU FI Subsidiary Ledger (FI-AP-AR) (BSEG)
E1FISEC CPD Customer/Vendor (BSEC)
E1FISET FI Tax Data (BSET)
E1FIXWT Extended Withholding Tax (WITH_ITEM)
Files
Legacy Data On the PC (Frontend)
File to read GL Account info c:\GL_Account.txt
Data for Multiple Source Structures (Sequential Files)
Separator Tabulator
Field Names at Start of File
Field Order Matches Source Structure Definition
With Record End Indicator (Text File)
Code Page ASCII
Legacy Data On the R/3 server (application server)
Imported Data File for Imported Data (Application Server)
Imported Data c:\SYNERGO_CREATE_LCNA_FI_GLDOC_CREATE.lsmw.read
Converted Data File for Converted Data (Application Server)
Converted Data c:\SYNERGO_LCNA_FI_GLDOC_CREATE.lsmw.conv
Wildcard Value Value for Wildcard '*' in File Name
Source Structures and Files
HEADER_STRUCT G/L Account Document Header
File to read GL Account info c:\GL_Account.txt
LINE_STRUCT G/L Account Document Line
File to read GL Account info c:\GL_Account.txt
File content:
Document Header Text Document Type Document Date Posting Date Exchange rate Currency Translation Date Reference
G/L Account document SA 20080401 20080409 1.05 CAD 20080409 Reference
Order G/L Account Cost Center Base Unit of Measure Quantity Profit Center Text Debit/Credit Ind. Amount
44000022 1040 Line item text 1 H 250
60105M01 13431 TO 10 Line item text 2 S 150
800000 60105M01 Line item text 3 S 100
60110P01 6617 H 40 Line item text 4 S 600
44000022 ACIBRAM Line item text 5 H 600
The file structure is as follow
Header titles
Header info
Line titles
Line1 info
Line2 info
Line3 info
Line4 info
Line5 info
Could someone direct me in the wright direction?
Thank you in advance!
CurtisHi,
Thank you so much for yout reply.
For example
i have VBAK(Heder structure)
VBAP( Item Structure)
My file should be like this i think
Identification content Fieldnames
H VBELN ERDAT ERNAM
Fieldvalues for header
H 1000 20080703 swapna
Identification content Fieldnames
I VBELP AUART
Fieldvalues for item
I 001 OR
002 OR
Is this format is correct.
Let me know whether i am correct or not -
It is necessary to create one header data for each file to be sent to CDFS.
hi GUYS
my sce anrio is FILE-XI-PROXY
REQUIREMENT IS
SOURCE FILE TARGET FILE WILL BE
H1 H1 H1 H1
I1 I1 I2 I3
I2 F1 F1 F1
I3
F1
It is necessary to create one header data for each file to be sent to TARGET. Each file will be related to only one SAP Company Code.
Thanks
NAGaa
Maybe you are looking for
-
Remote access vpn clients, access to Internet resources
Hello, we currently have a remote access vpn set up terminating on an ASA 5520. Remote access users connect into this ASA and are able to access resources inside of the firewall- the public IP of the ASA is 1.1.1.135. We need these users to be able
-
Can I play Blu Ray on MacBookPro 2.4Ghz intel 2 core Duo
Hi, Just wanted to know if my MacBookPro 2.4Ghz intel 2 core Duo can play Blu Ray DVD
-
Greetings. Got a PC with rather old Win XP SP3 installation. Out of blue, it keeps restarting on the system loading screen and now I can only get to Safe mode. I tried a bunch of things in order to make Win work normally again, but so far no luck. He
-
Moving Graph Palette out of Pane
Hello, My current LV8.6.1 project has two modern XY graphs on the FP, separated by splitter bars and set to scale with the split. I have used property nodes to sync the graph scales and cursors using various graph change events. Because of this, th
-
Setting a High Resolution when generating a PDF
We build a lot of files for the outdoor industry (Billboards) the vendors send us the parameters that they want the files built at. For example, 1/20 th scale, and at that scale they set a certain "dpi" they require. So my questions: what is the max