Target Disk Mode with RAID Volume and Macbook Pro

I just received a MBP which I today intended to use to pull a netrestore image off our lab server. The latter is a Mac Pro with 2 RAID 1 arrays. I started the Mac Pro in target disk mode, hooked it up to the MBP and was expecting to see the RAID volumes to show up in the finder. Unfortunately nothing happened. I then started the disk utility only to find out that the volumes are shown but are not accessible.
Doing the same thing using our backup server (running OS X 10.4.8 server) works like a charm.
Is it possible that MBPs and/or the non-server version of OS X don't support target disk volumes off RAID arrays?
I used the same MBP as a target disk mode slave today and that, too, worked.

Hello BK:
Welcome to Apple discussions.
This knowledge base article will, perhaps, give you more information:
http://docs.info.apple.com/article.html?artnum=58583
Barry

Similar Messages

MBP and target disk mode with PPC desktop

I am thinking about finally jumping to a MBP from a PowerBook.
One of the things I do a lot is hook up my PowerBook in target disk mode to interchange information with my PowerPC desktop.
Any problems with using a MBP in target disk mode with a PPC desktop? If so... what???
Thanks for any feedback, help, cautions.
-- Jim
Powerbook 15 1.67ghz High Res DDR2 Mac OS X (10.4.6) 1.5gb ram, 80gb

We just took the plunge and our MBP is being shipped.
Did you let the Migration Assistant move your applications? I am thinking about whether it is a good idea to migrate Final Cut Studio and any other non-Universal apps, for example, from the PowerBook, then get the Universal upgrades? Or just get the Universal versions and install them?
thanks

My ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

my ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

You can try Restoring it in iTunes but I believe you will end up needing to have it serviced.

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

IMac in Target Disk mode won't mount on Mac Pro via Firewire

My iMac (intel Core 2 Duo) won't start up - it has the question mark in a folder icon.
I can't find the Apple Snow Leopard disk, so I've started it in Target Disk mode, connected it to my Mac Pro, but it doesn't mount on the Mac Pro even though it appears in System Profiler on the Mac Pro.
Both running 10.6.8
Can I force it to mount? I have tried front & back firewire ports and restarted several times to no avail.
I'm hoping to repair the iMac disk using Disk Utility or Diskwarrior on the Mac Pro, but need it to mount first.
Any ideas? Thanks.

I want to copy everything off the iMac before re-installing Snow Leopard & starting again.
I do not have a backup of the computer (I've had a backup hard drive on order for 7 weeks that has been delayed due to the shortages...) I am aware that this is very stupid of me.
The disk is obviously in very bad shape as Disk Utility can't do anything with it.
Diskwarrior v4.2 on a DVD will make a 'Preview' of a directory of it, but will not 'Replace' the directory as the disk is damaged.
1. Does anyone know how to make a startup DVD of Diskwarrior v4.4 (I have the v4.4 update but can't find out how to make a new startup DVD using the old v4.2 DVD and the software v4.4 update) and I think Alsoft must now be on holiday as they're not answering... (I would like to use v4.4 as it should be more capable).
2. Assuming I can get Diskwarrior (hopefully on a new v4.4 DVD) to make a 'Preview' again of the iMac directory, how do I copy everying off the computer? My only guess is to connect my Mac Pro in target mode to the iMac. Will the Mac Pro disk show up in the 'Preview' directory & therefore allow me to copy all of it's contents across to the target mode disk?
3. Assuming all the above works, is there a best way to copy all of the iMac contents to a folder in the Mac Pro? i.e. is there a way of Carbon Copying it so that after wiping the disk I can simply copy it all back? Or is it all too late for that
THANK YOU very much for any help.

Target disk mode with external hard drive?

Hi all,
I have a very annoying problem. I've just bought a new Mac Mini, previously I had an iBook G4 600 (about 6 years old). My Mac mini works perfectly, but...
1) I don't want to copy everything over from the iBook with Migration Assistant, I'd rather pick and choose what to copy. Is buying a firewire cable and using Target Disk mode the only quick way to do this?
2) I was intending to transfer files using my external HD. But the Mini doesn't recognise my poor old external drive. However, all my iTunes music is on the external HD. It seems by far the fastest way to get the music off (as long as I can't get the mini to recognise the HD)would be to boot the iBook in Target Disk mode then somehow be able to read from the external HD as well. Is this possible? If not, what on earth can I do??
Thanks in advance,
Suz
Message was edited by: Suz

Okay after testing, I am ready to conceded that you are correct that you can daisy chain an external drive and a TDM Mac together and have them mount both drives.
However. unless Suz proves me wrong (Which is always a possibility), I do not think that it will fix her initial problem. Since all's TDM does is allow the computer to act as a Firewire device, so it and the external hard drive, are simply 2 FW devices on a serial bus. If the new Mac Can't mount the external drive from the old computer, I doubt it would mount it with the old computer connected to it. (Unless there is just some funky thing going on that having another firewire device on the bus corrects?)
Let's see if it shows up in System profiler, and if it shows up there how does Disk Utility see it?
Have you also tried resetting the NVRAM?
Also just to be on the safe side, do you have another Firewire device that you can connect, to let us know that the port on the new mac is actually working?

Startup problem after use in target disk mode with a PC. Ideas?

I used my Mac 10.4 in traget disk mode. Data transfers between Mac and PC worked fine (via Macdrive 6). After disconnecting and trying to boot normally, Mac doesn't recognize internal volume. It flashes the question mark.
Tried to repair disk via install DVD - disk utility found no problems.
Reapired permissons.
Reset PRAM and NVRAM.
Tried Startup utility - found the internal volume and even after selecting it for startup, I still get the flashing question mark.
Apple hardware test found no problems.
Archive and reinstall is not allowed.
Data can still be accessed fine via target disk mode.
Any ideas how to reinitialize or reset the startup volume?
Powerbook G4 Mac OS X (10.4.8)

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

Target Disk Mode with G4 PowerBook

This week I'm installing a new hard drive in my 2003 867Mhz PB. I plan to do a fresh install from the original CDs so I will have a computer clear of much data for a trip I'm going on next week. I will apply all updates to 10.4.11 to match my Mac Pro.
1. Can I install my '08 iLife apps onto my PowerBook? I'm the only user of both machines and normally I wouldn't care that the PB still has '06 since I rarely use it. However, the purpose of my trip is to take photos for five days. My PB doesn't meet the minimum requirements for Aperture. I want to start culling some of the photos on the trip so I won't have too many to import to Aperture when I return. Taking a bunch of DVDs isn't an option because the PB doesn't have a SuperDrive.
2. If I can install iPhoto '08, will Aperture see the PB's iPhoto Library in Target Disk Mode? If I can't install '08, will Aperture see the '06 iPhoto Library in Target Disk Mode? I will not be editing any photos in iPhoto on the PB - only viewing them to delete the bad out of the collection so I won't have to import a huge collection. Obviously iPhoto won't be running on either machine when I connect them in Target Disk Mode, so technically I won't have more than one copy in use at any time.
I have a wireless home network. I could set up file sharing on my PB to transfer the photos, but I think that would be much slower than using Target Disk Mode. Since I'm taking photos for my job, and knowing the schedule of events and shoot list, I'm estimating 10G of photos minimum. That's a lot of time with a pokey old PB for transferring. I won't be taking a Firewire hard drive because it's too bulky with all the other equipment considering that the 120G hard drive I'm installing in the PB won't have many apps. I also won't have internet access so I can't upload the photos to my iDisk.
3. Does anyone know if Target Disk Mode can be used with my PB when I upgrade my Mac Pro to Leopard? I'm not planning on installing Leopard on the PB (don't know if it meets the minimum requirements) because I don't see myself using the PB too often. By the time I need to be portable more frequently, I will buy a MBP. I hadn't turned the PB on for over a year until last week to make sure it still works for this trip. It would be more useful to buy an extra iPod to store photos than to buy Leopard for the PB.
Sorry if that seemed like a confusing bunch of questions. I tried searching the forums and Apple's support site and now I'm too exhausted to think too clearly. Thanks for any help or pointers.

I have to answer my own post as this question probably isn't allowed here. After installing the new hard drive I read the license agreement while waiting for the restore DVD to finish. I didn't bother with upgrading 10.2 which is what the PB had when new. I immediately installed Tiger and after it's done updating I'll see what software I need/want besides iWork. I'm sure Tiger isn't different in the license than Leopard. (So I'll have to plan on getting a new portable soon as I think the Target Disk Mode is faster for transferring unless I get another Firewire drive.)
But at least the new hard drive and maxed RAM has made my PB a bit more peppy. Or maybe I'm not remembering how slow it was because I haven't yet used it. I'm currently still waiting for Tiger to finish installing. I'll hold off a little longer before upgrading my Mac Pro to Leopard to find out if there are any network gotchas I should know about with my PowerBook. If I'd been using the PB, I'd know all these answers. I've just been so thrilled with my Mac Pro and 23" monitor that the PB hasn't had much appeal. But maybe I'll try to wring a little more life out of the PB.

Target Disk Mode with Set Up Assistant?

I am receiving a new Mac Pro on Monday and want to transfer all my apps and data and settings from my old Mac Pro (running 10.6.8), via Set Up Asst using firewire target disk mode. My question is, do I connect and turn on the old Mac before I start up the new Mac for the first time? Thanks in advance.

Thansk very much, Barney-15E. Here's what I did, which worked perfectly: in system prefs on old computer, selected Restart machine in Targe Disk Mode. It restarted as advertised. Connected old to new computer via firewire. Then hit power button on new computer, for first time. Set Up assistant ran right away, and I chose the option to import settings, users, data, apps from disk (old computer in target disk mode), which was mounted. Worked perfectly. I am impressed by how smooth this transition was, inherited my old time machine backups, everything is great.

Bluetooth not working with car audio and macbook pro ret

I use Iphone 5 and macbook pro ret with 10.8.2. but I cant pair it via Bluetooth with any other item (Mercedes Comand). Not even with the Mac. very unhelpfull with a new phone and new apple macbook. what can help

iPhones have NEVER paired with laptops except for the sole purpose of tethering. Have you read your Mercedes operating manual and made sure the Command is in pairing mode?

Integrating new ext HD with Time Capsule and MacBook pro

I just purchased a 4 TB Seagate Backup Plus that I’m looking to integrate with my mid-2009 MacBook Pro and 2 TB Time Capsule that I’m currently using to store my iTunes library (I know, bad move, one of the reasons for the new Seagate) and run my Time Machine backups. If I can use the TC only as an external HD and backup with Time Machine to the new Seagate I’m willing to do that. If I can’t, I understand the limitations of the larger capacity Seagate with the smaller TC. Probably won’t top 2 TB for a while so I’ll cross that > 2 TB of info bridge when I get to it and need a larger drive for Time Machine backups
The current plan is to move the iTunes library to the Seagate along with the new, and ever growing Aperture library (currently on the MB) while backing up both the MacBook and Seagate to the Time Capsule; unless I can switch them and use the TC as an ext HD and the Seagate for backups. How do I go about doing this? How do I answer the “Do you want to use this new drive with Time Machine” prompt being that I’m currently not planning on backing up to the Seagate but want to backup the Seagate up to the TC? Do I need to reformat the Seagate disc? Still figuring out how I want to configure the Aperture (which I’m still learning) library but I’d like to keep the mobility advantage of the laptop and use the internal HD for a working library and move the post-processed images to the Seagate for archival. I’ll be checking on the Aperture forum.
Thanks for any help to this incredibly newbie type question. There’s usually a similar, but not exact, answer to my questions on forums or the threads are a few years old, so figured it would be faster and more accurate to just ask.

I just purchased a 4 TB Seagate Backup Plus... If I can use the TC only as an external HD and backup with Time Machine to the new Seagate I’m willing to do that.
The Seagate Backup Plus portable drives are Time Machine compatible so you shouldn't have any issues backing up your MacBook Pro to this drive. You also shouldn't have any issues using the TC as an "external HD" if you actually meant "network" drive. That is, it will still be available on the network as a storage device.
The current plan is to move the iTunes library to the Seagate along with the new, and ever growing Aperture library (currently on the MB)...
That shouldn't be a problem.
...while backing up both the MacBook and Seagate to the Time Capsule
Backing up the MacBook Pro using Time Machine will not be an issue, but you will not be able to use Time Machine to back up the Time Capsule to the Seagate. It may still be possible to use some other back up solution for this.
How do I answer the “Do you want to use this new drive with Time Machine” prompt being that I’m currently not planning on backing up to the Seagate but want to backup the Seagate up to the TC?
At this point, just answer "No." You can always choose the Seagate as a Time Machine destination later via the Time Machine interface. Again, you CANNOT back up the Time Capsule to the Seagate with Time Machine.
Do I need to reformat the Seagate disc?
If you got the Mac version of this Seagate drive it is already properly formatted. However, if you got the PC version, you will need to reformat it for HFS+ in order for the TC to share it out properly. That means you will need to temporarily connect it to your Mac, via USB, and then, use the Disk Utility to format it.

I have a Thunderbolt iMac 27" with a Thunderbolt Display attached. I would like to use the iMac and Thunderbolt display in Target Display Mode for my new Thunderbolt MacBook Pro. So far, it seems I can only use the iMac screen itself. How do I do this?

When I press the Command + F2, the iMac screen becomes a secondary for the MacBook Pro, and the Thunderbolt Display becomes the primary screen for the iMac. I was hoping that both screens would become secondaries for the MacBook Pro. Does anyone know how I should proceed? I have tried to connect the Thunderbolt display directly to the MacBook Pro, and the iMac to the Thunderbolt Display via the separate Thunderbolt cable, but there was no difference. And since the MacBook Pro only has the one Thunderbolt port, I'm not sure how to proceed.

Yes, eww, the language definitely states two thunderbolt displays, but I can understand the confusion and was siding with how they could make the mistake to think it would work like they want it to. My appologies for not being clear on that point, but I think you make it clear that the language in the ad says nothing about an imac.
Having said that all the language about TB would suggest that this would be possible. http://www.apple.com/thunderbolt/
High performance on display.
Thunderbolt I/O technology provides native support for the Apple Thunderbolt Display and Mini DisplayPort displays. It also supports DisplayPort, DVI, HDMI, and VGA displays through the use of existing adapters. So you can connect your Apple LED Cinema Display or other display, along with multiple high-speed devices, all from a single port.

How to get clamshell mode with Windows 7 on Macbook Pro?

Hi,
I am running Windows 7 on Macbook Pro using bootcamp. In OS-X, I can use this cool clamshell feature wherein after putting the MBP to sleep by closing the lid, as soon as I connect an external keyboard, mouse & monitor, I get the display on the monitor and immediately start using the keyboard & mouse too, converting the laptop instantaneously to a desktop.
I am trying to do the same thing on Windows 7, close the lid of the laptop to put it to sleep, connect my external monitor, mouse & keyboard, but however the laptop never wakes up (even after moving the mouse & pressing keys in the keyboard). I tried several things in Windows 7. Under Power Options, Disabled "selective Suspend of USB", but that did not help. Next, in the "Device Manager", for the "Root USB Hub" & "Generic USB Hub", I tried to set "Allow this device to wake up the computer", under Properties -> Power Management, but that option is grayed out. I tried to experimented with Sleep types like S1, S2, S3, but except for S3, the other two are shown as "not supported by firmware" (using powercfg option in command line). Countless hours wasted on google search to get this working with no success
I would greatly appreciate any help on this issue.
Thanks,
Sri

@mkultraviolent,
Thanks for the quick reply.
That seems to be a useful workaround, but I do not find the option mentioned in Display/ Nvidia control panel. However, I find an option in the "Power Options" which has a "Do Nothing" option in the combo box to select what "Closing the Lid" does. Is that what u are referring to?
Also, one problem in this approach is, if we do not sleep when the display is closed, that will keep the internal display (laptop's display) running in clamshell mode even after the lid is closed? (which will heat up the laptop badly).
The exact option I am looking for is, while the laptop is in sleep & lid closed state, connecting the external keyboard/mouse/monitor and pressing a key in the keyboard or moving the mouse should wake the computer from sleep. If this happens, the internal display won't be running. I am able to achieve this in OS-X.
In Windows7, I have a workaround by which I can almost achieve this result, wherein, while the laptop is in lid-closed, sleeping state, after connecting the external devices (keyboard/mouse/monitor), I open the laptop's lid for a fraction of second, quickly move my finger over the touchpad & close the lid again. This wakes up the laptop, & while it is waking up, Windows realizes that the lid is closed and that external devices are connected and gets into clamshell mode (I have verified that in this state, the internal display is not running).
This workaround was fine so far, but I got this hengedocks docking station for my macbook, and I am no longer able to use the workaround, because, after plugging my macbook into the docking station, I cannot open the lid. So, the only option is to make Windows7 realize that external devices are connected & wake up on external keyboard stimuli (Hence the question).
If my question is not clear, this video kind of explains what I want to achieve:
http://www.youtube.com/watch?v=YOKu9uwdwZI&feature=player_embedded
Appreciate ur help!

Anybody experience with FCP X and Macbook pro 15inch 2.2?

My old mid 2009 macbook harddrive died on me today, and I'm thinking to upgrade. Sell the old one and buy the new 2011 2.2. The old one was slow in rendering and had lots and lots and lots of spinning beachballs. Was I pushing it too hard? Don't know, but it was horrible. I lost so much time.
Anyway, does anybody have this combo fcp x and the new 15inch macbook pro with the 1gig card and what are your findings??
Thanks
Peter

I've got a 2011/2.2/8GB/6750 running FCPX. Once I troubleshooted my external HDs (a Drobo that was nearly full with Time Machine backups was slowing down the entire Firewire bus) things run a lot better. I'm currently storing video on a Promise Pegasus R4 Thunderbolt RAID and the entire system is pretty snappy. The only slowdowns are:
1. clips, events, and projects on slower hard drives can slow down launching the app and screen refreshes
2. FCPX is still flakey. It will run great for a whole day and then will refuse to launch the next morning.
3. exporting through Compressor is slow, particularly when I'm under deadline! 10 minute HD segments can take an hour or so. The Activity Monitor shows the CPUs maxed out, so I suspect that's the bottleneck. I've tried setting up distributed rendering but it doesn't work quite yet.
4. FCPX can be a RAM hog, so if you're a rabid multi-tasker like me, prepare to beachball or change your wicked ways.
All in all, FCPX runs pretty well on my MBP. If video editing was my main line of business, I'd seriously consider a Mac Pro stuffed with RAM and as many cores as I can find. I might wait for a newer one with Thunderbolt though for a bit of future-proofing.
Hope this helps...

Problem with Presonus Firebox and Macbook Pro

I own a Presonus Firebox firewire audio inteface, which seems to have a problem with bus power. If I plug in the the firebox using firewire, it is not seen by the OS, and the blue power light flashes faintly. If I then plug in the mains power cord, it works fine. If I then unplug the power cord, it STILL works fine.
This has me beat...if there isn't enough power from the firewire port, how come it manages to stay on after I unplug the mains?
Any help would be greatly appreciated
17" Macbook Pro Mac OS X (10.4.6)

FINALLY someone else has this problem. I was
beginning to feel like the only person in the world!
Thats why I posted as soon as I saw your comments. I was also glad to see I was not alone. I have contacted presonus via email about it. What is the easiest way to contact apple? By phone support? I want to get this problem recognized as high up the ladder as possible, and not have to go the through their usual protocol of trouble shooting that I know wont fix it (i.e. repair permissions, reset pram, ect...).
Also, another thing we should do is post it on presonus's message boards to flag other users with the problem and get this issue into the spotlight so it gets fixed. I thought I saw that presonus has message boards but I could not find them. Please post their link if you know it. MacFix it is another good place that will draw attention to this problem. We should also post there. In addition I am going to email a Mac podcast I listen to about this. I know the host has a 17" MBP. Does this issue effect using external hard drives without AC adapter as well? That way I could have him test this.
Thanks for the work around but I would not even dare attempt that kind of soldering and such do to lack of experience. I'd consider paying you to make me one if you know what your doing and your sure it wont negatively effect anything:)
Paul

Target Disk Mode with RAID Volume and Macbook Pro

Similar Messages

Maybe you are looking for