Target Display Mode And Ethernet Connection.

Can I use my iMac as a display for a Mac Mini using Target Display Mode while using the iMac as a slave for the Mac Mini via ethernet?

OK.
I have a 2011 iMac which I use as my DAW. First I want to transfere the entire hard drive contents over to a Mac Mini(fusion drive) using Apple Migration Assistant.
Next I'll trash most everything on the iMac except for my DAW plugin libraries and then install and set up Vinenna Pro 5.
Next I'll connect my iMac to the Mac Mini with a TB cable in Target Dispaly Mode.
Then I'll connect the iMac and Mac Mini using the ethernet ports to access Vienna Pro 5 with my DAW(host) software.
Apple states that the USB and FW ports won't function on the iMac while in Target Display Mode but does not mention ethernet so I'm asuming that it will.
What do you think?

Similar Messages

  • HT3924 can i use iMac keyboard and mouse when it is in Target Display Mode and attached to my MBP?

    I can attach my iMac to my MBP via thunderbolt and run it in Target Display Mode, so that itsimply becomes a screen attached to my MBP.
    What I really want is for the keyboard and mouse of my iMac to also operate as if they were attached to my MBP, but I cant seem to achieve this.
    Is it possible?

    Its a wireless mouse and keyboard - dont think I can re-pair the keyboard to MBP since I need it talking to the iMac to enable and disable TDM?
    I expected TDM to natively pass through the mouse and keyboard to the MBP, since that is the obvious user requirement. But this does not happen.
    So I guess I want a workaround so my iMac keyboard and mouse can drive my MBP while attached via Thunderbolt cable in TDM mode.

  • Target Display Mode - Connecting pre-Thunderbolt Macbook Air to Thunderbolt iMac.

    I want to use Target Display Mode in order to display my late-2010 Macbook Air (pre-Thunderbolt) to a Thunderbolt-based iMac. Is there an adapter solution to connect, say, a mini display port + USB port on the MB Air to the iMac Thunderbolt port, such that TDM would work?

    Depends upon the situation.  Take a look at this blog:
    http://blog.macsales.com/10899-target-display-mode-and-thunderbolt

  • HT3924 Target display mode connects but only displays desktop background, no files or command lines

    I have connected my early 2014 MacBook to a late 2012 imac and connected them via Thunderbolt cable.  Pressing Command F2 causes the screen on teh iMac to change to teh MacBook background screen, but does not display any desktop files or command lines.  Any ideas how to fix this?

    Hi tdmone,
    Welcome to the Support Communities!  The resource below may help you with the Target Display Mode options for connecting your Macbook and iMac:
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    http://support.apple.com/en-us/HT3924
    The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
    iMac Model
    Cable Supported
    Port on Source Computer
    iMac (27-inch Late 2009)
    Mini DisplayPort to Mini DisplayPort
    Mini DisplayPort or Thunderbolt
    iMac (27-inch Mid 2010)
    Mini DisplayPort to Mini DisplayPort
    Mini DisplayPort or Thunderbolt
    iMac (Mid 2011)
    Thunderbolt to Thunderbolt
    Thunderbolt
    iMac (Mid 2012 and later)
    Thunderbolt to Thunderbolt
    Thunderbolt
    Are you connecting via the Thunderbolt ports on both computers?
    How do I enable TDM?
    Make sure both computers are turned on and awake.  
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer. 
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM. 
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and off.
    I hope this information helps ....
    - Judy

  • Target Display Mode on late 2013 27" iMac to mid 2010 27" Imac

    Hey guy's real strugling to make my 2010 imac become a display, When i connect my 2010 cinema display 23" everything works fine but the minute i try to enable the tdm function on the 2010 imac nothing happen. Like nothing I got the mini display to thunderbolt adapter but nothing happen with the imac.
    Any help or suggestion is very welcome.

    Target Display Mode 2009 & 2010 iMacs
    Target Display Mode And Thunderbolt
    iMac- How to use your iMac as a Target Display Mode display
    iMac (Mid 2011)- Target Display Mode does not work with Mini DisplayPort cable

  • 15 inch early 2011 Macbook Pro to Mid 2010 27 inch Imac Target Display Mode

    Hi Guys
    I have a early 2011 15" Macbook Pro with thunderpolt port aswell
    as a Mid 2010 27" iMac with MiniDisplay port.
    I am trying to use the iMac as a second screen for my Macbook.
    Both has Mountain Lion on them.
    I have both Thunderbolt to Thunderbolt aswell as miniDisplay to MiniDisplay
    cables.
    I can't get target display mode to work.
    The thunderbolt cable doesn't work at all.
    The MiniDisplay does seeem to work to an extend but not completeley.
    When i plug in the MiniDisplayPort cable to both machines then
    the Macbook pro screen becomes blue which means secondary monitor detected.
    iMac screen becomes blank. Sometimes i have enough time to see in system preferences that
    the Macbook pro actually has a secondary monitor.
    But just as it turned blue on the Macbook pro and black on the iMac. It turns blue again
    and the iMac returns to it's Desktop.
    The exact same happens when i Press Command + F2 on iMac keyboard.
    Any help or ideas?

    I have a 13"macbook air and a Dec. 2012 iMac 27". Out of the blue it stopped working in Target Display Mode. Switching cables doesn't help, and the iMac and MBair are connect to power. I can see the iMac screen in Share Screen mode on the MB air.
    This seems to be an issue, I have encountered eg. in MacRumours:
    Jan 11, 2013, 10:17 AM
      #5
    martinm0 
    macrumors 6502
    Join Date: Feb 2010 
    I have the same issue with my 2012 27" iMac (3.4, 680MX). When I initiate Target Display mode the iMac goes black and never comes back up. On the laptop I can see the display in Display Preferences, but its as if the backlight doesn't come on in TD mode. (I even did screen sharing into the laptop and can see both displays there.
    Anyway, called Apple and they determined its an issue and I have to send in for a replacement.
    Anyone else with a 2012 iMac (21.5 or 27), can you please test out Target Display mode and let us know if things are working or not?

  • Two i3 iMacs won't work in Target Display Mode

    I do have Belkin Mini DP to Mini DP cable. Command +  F2 doesn't help either. Please help

    24. Can I use Target Display Mode or Target Disk Mode with Boot Camp and Windows 7 or 8 using a Thunderbolt-capable iMac?
    No. Target Display Mode and Target Disk mode are not supported using Boot Camp and Windows 7 on a Thunderbolt-capable iMac.
    http://support.apple.com/kb/HT5219?viewlocale=en_US#17

  • Apple Mini DVI to DVI Adapter to connect Win7 tower to iMac / Target Display Mode

    I currently run Windows on bootcamp on the iMac (Mid-2011), although the tasks I perform (3D modelling, rendering and such) cause the Mac to get very hot, and as a result hae a slight burn mark on the LED LCD screen.
    I am buying a Windows machine, and am to uninstall bootcamp and use the Mac purely for OSX, but use the iMac screen as a monitor for the tower using Target Display Mode. My issue is - the Windows 7 tower only has DVI output. And as I understand, the Mid-2011 iMac only supports Target Display Mode via a thunderbolt cable.
    My question is - Will the Apple Mini DVI to DVI adapter allow me to connect the DVI-only tower to the iMac? Thanks in advance x

    Oh, I should mention also that the iMac is the 27" model. Mid-2011 3.4Ghz Intel Core i7 with 4GB RAM and 1TB Harddrive. And ATI HD5450 1GB Graphics.

  • TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

    Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

    Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

  • Non-Apple keyboard and Target display mode?

    Hi,
    How do I change to Target Display Mode with a Logitech keyboard? The usual Command/Windows + f2wont work!
    edit: what would be perfect is an applescript to do this, anybody ever heard of one?

    Probably be better to search the logitech boards, here's some reference to the cmd and option keys being switched:
    http://forums.logitech.com/t5/Keyboards-and-Keyboard-Mice/wave-pro-on-OSX-comman d-key-switched/m-p/31
    Regards,

  • Can iMac act like a target display? Can we connect a PC/MAC to iMac and can it just work like a monitor.

    Can iMac act like a target display? Can we connect a PC/MAC to iMac and can it just work like a monitor.

    It depends.

  • I have a late 2010 MB Air (mini display port) and a new 2013 iMac (thunderbolt) which I would love to use as an external display. I suspect that target display mode won't work.Any ideas for how to achieve this?

    According to the TDM support page, this isn't possible. I tried it with a Mnidisplay port to minidisplay port cable without success. Its a shame that thunderbolt doesn't appear to be backwards compable as I could have achieved this with an older iMac.
    Cheers

    You are correct....it will not work. Please carefully read Apple's Target Display Mode: Frequently Asked Questions (FAQ)

  • Daisy-chaining thunderbolt in target display mode

    If I connect an imac 27" (which has two thunderbolt ports) to my retina MBP via target display mode, can I use the thunderbolt gigabit ethernet adapter on the imac and get network on my macbook via "Daisy-chaining"?
    It's a shame that there are no cheap thunderbolt hubs available so I'm hoping for this so I can use two displays and still have ethernet.. The option is maybe using the USB to ethernet adapter but I'd rather not.

    Target Display Mode is not the same as Target Disk Mode. The latter is done using Firewire. The former is only currently usable with a 27" iMac with a Thunderbolt port. Target Display Mode is for using the iMac's display with another computer that has a Thunderbolt port.

  • How can I use my 27" iMac (2010) as an additional display to my Windows 7 PC (target display mode)?

    So I have purchased a windows machines so that I can play all my favourite games on, and it's not so much a problem rather I have a 27" iMac that I would like to use as an additional monitor for said games.
    I have had a look at this article on using the iMac as a display for another computer and things looked promising. I think I need a bit of help getting there though as I can't find definitively anything online to tell me exactly what I need. Most stuff talks about connecting other Apple computers that have mini display ports.
    My PC's video card is an nVidia Geforce GTX 650 Ti that sports 2 DVI ports and a mini HDMI port (adaptor to full HDMI was included). The iMac has a mini display port. I went out and got a HDMI cable and Moshi Mini DisplayPort to HDMI Adapter (with audio) to try to use the iMac as the additional display. I connected the PC with [a generic] HDMI cable to the adaptor which ran to the iMac and went through the appropriate steps (ie. pressing CMD + F2) to initiate target display mode. Nothing happened.
    I have read that other people with different situations tried an SMC reset, but this didn't work for me either.
    At this stage I wanted to see if the DVI port would do anything, or perhaps looking at a particular kind of HDMI cable, but wanted to see what the community can offer up as advice.
    Any assistance would be greatly appreciated.
    Thank you.

    Hi,
    have a read here http://support.apple.com/kb/HT3924
    Regards
    Stefan

  • IMac 27" Target DIsplay Mode + Answer to Windows 7 Boot Camp Install

    First, I'd like to address the handful of complaints I've come across about installing Windows 7 via Boot Camp on the new 27"iMac.
    The issue of the screen going blank when almost done has an easy albeit annoying answer. Simply connect the iMac to an external display, I used a small vga lcd with the Mini DisplayPort to VGA adapter. When the iMac's screen goes black the external lcd will continue, and when Windows 7 starts up it will download the updated ATI drivers. From there alls well.
    Second, my problem.
    Target Display Mode is a great feature. It worked great when I first used it, and it works great now except for the fact that the Command+F2 button combination stopped working. I have to manually unplug my MacBook Pro in order to get my iMac's original screen up. At first Command+F2 would allow me to switch back and forth, and now it does nothing.
    Any suggestions?

    Well, the usual first things to try for a display-related issue are
    Reset PRAM
    http://support.apple.com/kb/HT1379
    and of that does not help, reset SMC
    http://support.apple.com/kb/HT1543
    which is basically unplugging the iMac from power and reconnecting it following the precise procedure.
    Note: After resetting PRAM, you should go to System Preferences +Startup Disk+ pane to make sure your internal drive is selected (highlighted) as the startup disk.

Maybe you are looking for