Target file creation error
Hi All,
I m working on XML file to-Fixed length scenario.
MY target file should have following structure.
Im mapping xml file content to the target structure.
Recordset
REC 1 to n
A(3)
B(5)
C(6)
MY content conversion is as follows.
Recorset structure: REC
Content conversion parameters:
REC.fieldFixedLengths 3,5,6
REC.endSeparator : nl
Result:
Im getting only one first field information in target file.
Thanks in advance.
Venu.
Hi Krishna,
I foundall fields are coming with exact length
I'm passing spaces if there is no value.
xml message is generated correctly in the sxmb_moni after mapping ..shown all the fieldsunder REC structure .
Audit log information also correct.
<u>Attribute mapping</u>
I'm using the attribute fields of source XML message to target message.
Is there any effect with this?
Thanks,
venu.
Similar Messages
-
Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)That is an issue for the developer of that Download Helper.
-
CRM target griup creation error
Hello All
After i created a Clustered model successfully i went ahead to create a CRM target group and as the last step in the process I selected the Training source of my Clustering Model ,right clicked it and clicked Monitor
The result shows that the CRM target group creation was incorrect.The following screeen shows the error screen.
http://www.geocities.com/aditya_ponnam/errorscreen.JPG
Please advise.
Thank you
AdityaThnak you ashwin..
These were my steps
1.Created a clustering model
2.checked for inconsistencies and activated both the training model and training source
3.Trained source online
4.Viewed training source results-Value Distribution,Attribute data and Attribute charts and went ahead to create a target gruop
5.Created target group
6.Selected "immediate" and saved .
7.Went back and selected my training source and rightclicked to monitor it
8.The results were as shown in the figure below
http://www.geocities.com/aditya_ponnam/errorscreen.JPG
It flags that as Incorrect target group creation.Please see the figure.
What could be the problem here?
Thank you
Aditya -
Hai To All,
While iam creating Ard file there is an other named "Wrong Executable Digital Signature For Addon" while creating iam using one class file .dll which was created by me..
Any one help me........
Regards,
AnithaHi,
Usually this error occurs when we are not using the correct version of the Installer for creation of the ARD file. Use a new installer not the old one.. and check the below threads they could be of help...
Wrong executable digital signature for Add-On
Wrong executable digital signature for add-on
Wrong Executable Digital Signature for Add-on
Hi Experts/Friends wrong executable digital signature for Add-on
Vasu Natari. -
CNF file creation error with CME 8.0
Gettign the following error messages when I am trying to create cnf files
ME-ROUTER-A(config-telephony)#create cn
CME-ROUTER-A(config-telephony)#create cnf-files
Creating CNF files
Sep 23 03:43:43.131: Can't open file XMLDefault7962-7916-24-1.cnf.xml for write
Sep 23 03:43:43.487: Can't open file XMLDefault7962-7914-2.cnf.xml for write
Sep 23 03:43:43.843: Can't open file XMLDefault7962-7915-12-2.cnf.xml for write
Sep 23 03:43:44.199: Can't open file XMLDefault7962-7915-24-2.cnf.xml for write
Sep 23 03:43:44.555: Can't open file XMLDefault7962-7916-12-2.cnf.xml for write
Sep 23 03:43:44.911: Can't open file XMLDefault7962-7916-24-2.cnf.xml for write
Sep 23 03:43:45.267: Can't open file XMLDefault7965.cnf.xml for write
Any fix for this?
Regards,
ArmanYeah I have a command cnf-file location which I set to cnf-file location tftp. But even though I did not set that command the router should use the default location which is system/ins. Bu tin my case it is giving error message without cnf file location command. Any reason why I have to use this command and what is his purpose as it has options flash or tftp?
Regards
Arman Hossain -
Hi
I am trying to create my password file and getting the following error, any idea please.
C:\>orapwd file='C:\app\oracle\product\11.1.0\db_1\database\pwdorcl.ora' entries
=5
Enter password for SYS:
OPW-00001: Unable to open password-file
C:\>Oracle 11.1.0 on windows xp
Thanksorapwd -help
Usage: orapwd file=<fname> password=<password> entries=<users> force=<y/n> nosysdba=<y/n>
where
file - name of password file (mand),
password - password for SYS (mand),
entries - maximum number of distinct DBA,
force - whether to overwrite existing file (opt),
nosysdba - whether to shut out the SYSDBA logon (opt for Database Vault only).
There are no spaces around the equal-to (=) character.Does the OS user have necessary permissions to open file? -
Hi
I logged as a sys and execute the following code.
But I'm getting ERROR: Invalid PATH FOR file.
CREATE or replace DIRECTORY test_dir AS 'C:\';
DECLARE
fileHandler UTL_FILE.FILE_TYPE;
BEGIN
fileHandler := UTL_FILE.FOPEN('test_dir', 'test_file.txt', 'W');
UTL_FILE.PUTF(fileHandler, 'Writing TO a file\n');
UTL_FILE.FCLOSE(fileHandler);
EXCEPTION
WHEN utl_file.invalid_path THEN
raise_application_error(-20000, 'ERROR: Invalid PATH FOR file.');
END;What could be the reason
Version : 10.2.0.3.0 - Prod
Database running on same machine
Cheers
ShabarHi Krystian Zieja
Thax for your reply.
How to check whether permission is there before grant/
I thought since logged as SYS user I get the permission automatically
Cheers
Shabar -
RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation fai
Hi guys,
I am cloning and EBS 12.1.3 from one server to another, and when Configuring the target system database server with ''perl adcfgclone.pl dbTier'', I am getting the following error:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
MOS is saying that it is due to wrong permissions on the /var/tmp/.oracle directory and we should give it the following permissions:
chmod 777 /var/tmp/.oracle
After giving those permissions and rebooting the server , and running the perl adcfgclone.pl dbTier script, I am still having the same problem:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
This is the contents of the ApplyDBTier log file (since the file exceed 30.000 characters, i am going to post the parts where the errors occur:
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$ cat ApplyDBTier_05021530.log
Started ApplyDBTier at Thu May 02 15:30:44 WAT 2013
Version:
ApplyDBTier.java : 120.6.12010000.3
ApplyDBTier (prog) -1 true true true...
# Calling ApplyDBTechStack...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Executing home registration for s_db_oh...
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adouidb.pl
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u02/oratest/db/tech_st/11.1.0/appsutil/out/ouicli20.pl
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
dest : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c
backup : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c to /u02/oratest/db/tech_st/11.1.0/appsutil/out/config21.c
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u02/oratest/db/tech_st/11.1.0/appsutil/out/adlnkoh20.sh
setting permissions: 700
setting ownership: oratest:dba
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/perl/bin/perl -I /u02/oratest/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/appsutil/perl /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_db_ohThu May 2 15:30:46 2013
/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin/java -classpath /u02/oratest/db/tech_st/11.1.0/appsutil/java:/u02/oratest/db/tech_st/11.1.0/oui/jlib/OraInstaller.jar:/u02/oratest/db/tech_st/11.1.0/appsutil/java/xmlparserv2.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml -nolink -oaVar s_db_oh -homestub db -log /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/ohclone.log
Running OUI CLI home cloning from within OracleHomeCloner:
/u02/oratest/db/tech_st/11.1.0/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u02/oratest/db/tech_st/11.1.0/admin/oui/ERP_DLAERPSRV01/oraInst.loc ORACLE_HOME=/u02/oratest/db/tech_st/11.1.0 ORACLE_BASE=/u02/oratest/db/tech_st/11.1.0 ORACLE_HOME_NAME=ERP_DB__u02_oratest_db_tech_st_11_1_0 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_db_oh with return code: 0Thu May 2 15:30:56 2013
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
script returned:
adlnkoh.sh started at Thu May 2 15:30:56 WAT 2013
Log file located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
Using make file "ins_emagent.mk" for linking SYSMAN utilities...
Error while running adlnkoh.sh.
return code = .16
Please check logfile located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
.end std out.
.end err out.
Executing Technology Stack Configuration...
Executing runAutoConfig...
Deleting files of type INSTALL
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/sqlnet.ora
Processing driver file: /u02/oratest/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
Checking for file: /u02/oratest/db/tech_st/11.1.0/appsutil/install/ERP_DLAERPSRV01/txkConfigDbOcm.pl
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/dbs/initERP.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/tnsnames.ora
File exists
File deleted
Testing for RAC specific parameters before running autoconfig
No RAC specific parameters were found, running with CVM
Starting CVM in INSTE8_SETUP mode
Using Context file : /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u02/oratest/db/tech_st/11.1.0/appsutil/out/ERP_DLAERPSRV01/05021531/ERP_DLAERPSRV01.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /u02/oratest/db/tech_st/11.1.0/appsutil/template/custom/adxdbctx.tmp
Custom template : Not Available
Customizations found : None
File system Context file :/u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
===========================================================================
Starting Updates of Context file Thu May 02 15:31:44 WAT 2013
found context version : 120.34.12010000.14
available update version : 120.34.12010000.14
No updates to apply
Starting DB listener with command:
/u02/oratest/db/tech_st/11.1.0/appsutil/scripts/ERP_DLAERPSRV01/addlnctl.sh start ERP
Logfile: /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt
You are running addlnctl.sh version 120.1.12010000.4
Starting listener process ERP ...
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 02-MAY-2013 15:32:23
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting /u02/oratest/db/tech_st/11.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Log messages written to /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
STATUS of the LISTENER
Alias ERP
Version TNSLSNR for Linux: Version 11.1.0.7.0 - Production
Start Date 02-MAY-2013 15:32:23
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Listener Log File /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Services Summary...
Service "ERP" has 1 instance(s).
Instance "ERP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.sh: exiting with status 0
addlnctl.sh: check the logfile /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt for more information ...
.end std out.
.end err out.
checking DB Connection...
DEBUG: checkDBConnection in()
ADX Database Utility
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
DEBUG: checkDBConnection out()
Skipping Profile Phase
Skipping Apply Phase
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Thu May 2 15:32:40 WAT 2013
The environment settings are as follows ...
ORACLE_HOME : /u02/oratest/db/tech_st/11.1.0
ORACLE_SID : ERP
TWO_TASK :
PATH : /u02/oratest/db/tech_st/11.1.0/perl/bin:/u02/oratest/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
LD_LIBRARY_PATH : /u02/oratest/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/oratest/db/tech_st/11.1.0/lib:/usr/dt/lib:/u02/oratest/db/tech_st/11.1.0/ctx/lib
Executable : /u02/oratest/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/adcrdb_ERP.txt
Creating the control file for ERP_DLAERPSRV01 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:40 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ERROR:
ORA-01012: not logged on
Process ID: 0
Session ID: 0 Serial number: 0
Disconnected
exit_code=1
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:42 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Disconnected
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyDatabase.java:635)
at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDatabase.java:473)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:366)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:110)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Unknown Source)
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$
Please guys, how can I solve this problem?@Hussain Sawwan
Hi Hussain,
After successfully configured the DbTier and AppsTier with their respective post clone scripts the appstier was automatically started at the end.
But now, I can't seem to connect with my IE 9 and Firefow browsers.
Link: http://dlaerpsrv01.camairco.local:8002/OA_HTML/
Contents of the portpool.lst:
***** List of ports allocated based on port pool 2 *****
Database Port : 1523 (EXT_PORT)
RPC Port : 1628
Web SSL Port : 4445
ONS Local Port : 6102
ONS Remote Port : 6202
ONS Request Port : 6502
Web Listener Port : 8002
Active Web Port : 8002 (DUP_PORT)
Forms Port : 9002
Metrics Server Data Port : 9102
Metrics Server Request Port : 9202
JTF Fulfillment Server Port : 9302
MSCA Server Port : 10212-10217
MCSA Telnet Server Port : 10212,10214,10216 (DUP_PORT)
MSCA Dispatcher Port : 10806
Java Object Cache Port : 12347
OC4J JMS Port Range for Oacore : 23010-23014
OC4J JMS Port Range for Forms : 23510-23514
OC4J JMS Port Range for Home : 24010-24014
OC4J JMS Port Range for Oafm : 24510-24514
OC4J JMS Port Range for Forms-c4ws : 26510-26514
OC4J AJP Port Range for Oacore : 21510-21514
OC4J AJP Port Range for Forms : 22010-22014
OC4J AJP Port Range for Home : 22510-22514
OC4J AJP Port Range for Oafm : 25010-25014
OC4J AJP Port Range for Forms-c4ws : 26010-26014
OC4J RMI Port Range for Oacore : 20010-20014
OC4J RMI Port Range for Forms : 20510-20514
OC4J RMI Port Range for Home : 21010-21014
OC4J RMI Port Range for Oafm : 25510-25514
OC4J RMI Port Range for Forms-c4ws : 27510-27514
[root@DLAERPSRV01 appltest]#
Entry in the /etc/hosts in my Win 7 Laptop:
192.168.0.245 dlaerpsrv01.camairco.local dlaerpsrv01
What could be the cause of this problem? It is unfortunate to reach at this point and not being able to connect. -
RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation failed
There's anyone ever get error like this?
[oradev@ebs bin]$ ./adcfgclone.pl dbTier
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA
Oracle E-Business Suite Rapid Clone
Version 12.2
adcfgclone Version 120.63.12020000.7.1202010.2
Enter the APPS password :
Running:
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc5.jar oracle.apps.ad.context.CloneContext -e /u01/DEV/11.2.0/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_21933.lst -stage /u01/DEV/11.2.0/appsutil/clone 2> /tmp/adcfgclone_21933.err; echo $? > /tmp/adcfgclone_21933.res
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Provide the values required for creation of the new Database Context file.
Target System Hostname (virtual or normal) [ebs] :
Target Instance is RAC (y/n) [n] :
Target System Database SID : DEV
Target System Base Directory : /u01/DEV
Target System utl_file_dir Directory List : usr/tmp
RC-00213: Warning: The path specified must be the absolute path
Target System utl_file_dir Directory List : /usr/tmp
Number of DATA_TOP's on the Target System [1] :
Target System DATA_TOP Directory 1 [/apps/DEV/data] : /u01/DEV/data
Target System RDBMS ORACLE_HOME Directory [/u01/DEV/11.2.0] :
Do you want to preserve the Display [null] (y/n) : n
Target System Display [ebs:0.0] :
Do you want the target system to have the same port values as the source system (y/n) [y] ? : n
Target System Port Pool [0-99] : 0
Checking the port pool 0
RC-50221: Warning: Port Pool 0 is not free. Please check logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for conflicts.
Target System Port Pool [0-99] : 0
Checking the port pool 0
done: Port Pool 0 is free
Report file located at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Complete port information available at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Creating the new Database Context file from :
/u01/DEV/11.2.0/appsutil/template/adxdbctx.tmp
The new database context file has been created :
/u01/DEV/11.2.0/appsutil/DEV_ebs.xml
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Check Clone Context logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for details.
Running Rapid Clone with command:
Running:
perl /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl java=/u01/DEV/11.2.0/appsutil/clone/bin/../jre mode=apply stage=/u01/DEV/11.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/DEV/11.2.0/appsutil/DEV_ebs.xml showProgress contextValidated=true
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Beginning database tier Apply - Sun Mar 29 11:35:27 2015
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/u01/DEV/11.2.0/oui -classpath /u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc6.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/ewt3.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/share.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/srvm.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyDBTier -e /u01/DEV/11.2.0/appsutil/DEV_ebs.xml -stage /u01/DEV/11.2.0/appsutil/clone -showProgress
APPS Password : Log file located at /u01/DEV/11.2.0/appsutil/log/DEV_ebs/ApplyDBTier_03291135.log
\ 50% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
Sun Mar 29 11:46:03 2015
ERROR: Failed to execute /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl
Please check logfile.
[oradev@ebs bin]$perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C")
Please check - $ env | grep LC
If its set to LC_CTYPE = UTF-8 then unset or set it to blank value i.e. export LC_CTYPE =
Please see - ODA: oakcli command failed with perl: warning: Setting locale failed. (Doc ID 1526079.1)
-Kj -
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation fail
Hi,
During the clone of R12.1 instance, while running the post clone on the DB tier, i am getting the following error
RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation failed.
when i looked into the log file, i can find this
Creating the control file for hr12at1_jsrc-cn6 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Tue Nov 17 04:41:58 2009
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1318172 bytes
Variable Size 427819748 bytes
Database Buffers 629145600 bytes
Redo Buffers 13049856 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2:
'/u01/app/oracle11/db/apps_st/u32/oradata/R12HRM/tx_data11.dbf'
Please help
thanks a lot
SasikalaHi,
Sorry, my mistake, I did not pay attention to the cloning part.
For this error, looks like the database was not cleanly shutdown before copying the files or that preclone was not run successfully. You will have to run preclone again, and shutdown the database normally, then copy the file again.
Regards,
Hussein -
Hello All,
Posting this problem here and hoping for a solution from the experts in this forum.
When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
"The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
When Checked the Event Viewer i see the following error -
The service cannot be started: The following system error occurred: The filename, directory name, or volume label syntax is incorrect. File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
Backup'.
I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
Let me know if you need any more details
SGIs this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
succeed.
http://artisconsulting.com/Blogs/GregGalloway -
Error encountered in Rapid clone (control file creation failed)
hi all,
i have 2- node ERP server running EBS 11.5.10 with database 9.2.0.5 and OS HP UX 11.11
while running perl adcfgclone.pl dbTier
i encountered the following error
Verifying correctness of adcrdbclone.sql
RC-00115: Not able to read temp001.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp002.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp003.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp004.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp005.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp006.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp001.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp002.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp003.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp004.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp005.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp006.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00116: Error while reading dbf files. Control file creation will fail.
an later part of log file
Creating the control file for DVP_test database ...
SQL*Plus: Release 9.2.0.5.0 - Production on Sun Jan 11 18:29:27 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 598700552 bytes
Fixed Size 737800 bytes
Variable Size 419430400 bytes
Database Buffers 167772160 bytes
Redo Buffers 10760192 bytes
Control file created.
Database altered.
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp001.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp002.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp003.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp004.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp005.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp006.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
but when i query v$tablespace it shows temporary tablespace is TEMP not temp1
even on my production system the TEMPORARy Tablespace is TEMP
when i see the alert file
it says
Tablespace 'TEMP' #2 found in data dictionary,
but not in the controlfile. Adding to controlfile.
File #143 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00143' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #144 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00144' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #145 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00145' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #146 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00146' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #147 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00147' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #148 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00148' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #149 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00149' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #150 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00150' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #151 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00151' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #152 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00152' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #153 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00153' in the controlfile.
This file can no longer be recovered so it must be dropped.
how can i come out though this confusion??i have opened the database but what about the next porcess now
Beginning database tier Apply - Sun Jan 11 17:31:13 2009
Log file located at /oradvp/ora/proddb/9.2.0/appsutil/log/DVP_test/ApplyDBTier_01110531.log
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
ERROR: Failed to execute adclone.pl
Please check logfile.
logfile says
Checking for errors ...
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00376: file 148 cannot be read at this time
ORA-01111: name for data file 148 is unknown - rename to correct file
ORA-01110: data file 148: '/oradvp/ora/proddb/9.2.0/dbs/MISSING00148'
ORA-00600: internal error code, arguments: [1236], [], [], [], [], [], [], []
ORA-24313: user already authenticated
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ORA-24313: user already authenticated
ORA-01031: insufficient privileges
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 9.2.0.5.0 - Production on Sun Jan 11 18:30:01 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Disconnected
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : test
sDbDomain : khannapaper.com
sDbPort : 1528
sDbSid : DVP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@test.khannapaper.com:1528:DVP
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.khannapaper.com)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=DVP)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.khannapaper.com)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=DVP.khannapaper.com)))
Exception occurred: java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=153093376)(ERR=12514)(ERROR_STACK=(ERROR=(CODE=12514)(EMFI=4))))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:469)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:314)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:290)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:131)
at java.lang.reflect.Constructor.newInstance(Native Method)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Unknown Source)
and why does it shows temporary tablespace TEMP1
but in real it is TEMP
i dropped around 50 days back from production and added TEMP to it -
dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instancedear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance -
Clustering model ..target group creation ...error
Hello All
After i created a Clustered model successfully i went ahead to create a CRM target group and as the last step in the process I selected the Training source of my Clustering Model ,right clicked it and clicked Monitor
The result shows that the CRM target group creation was incorrect.The following screeen shows the error screen.
http://www.geocities.com/aditya_ponnam/errorscreen.JPG
Please advise.
Thank you
AdityaHi naveen
Thank you.How can I check the RFC setting for my CRM system?Has it got anything to do with this problem?I have just started learning SAP BW and CRM.Please suggest.As a matter of fact, this error occured in the BW system.The version of BW system is 3.1 Support Package 6.I could not figure out anything from the error description.Please look at this error screensot.
http://www.geocities.com/aditya_ponnam/errorscreen.JPG
Thank you
Regards
Aditya -
We use Visual Studio Online and the integrated continuous integration (build server) from Microsoft. We have a solution that contains multiple projects two of which are latest MVC projects. I updated a bunch of our Nuget packages yesterday and now we are
getting a build error one of our MVC projects. Any help is greatly appreciated as I have exhausted my resources trying to understand why the error is occurring!
We use nuget for our external libraries, the solution and projects and set to use Nuget Restore (no packages persisted in TFS).
We updated Angular to the latest version using Nuget updates inside of visual studio. Here an excerpt from packages.config in the project file. The first block is what was found in the packages.config before the update and the second block is after the
update.
<package id="Angular.UI.Bootstrap" version="0.11.0" targetFramework="net451" />
<package id="angularjs" version="1.2.23" targetFramework="net451" />
<package id="Angular.UI.Bootstrap" version="0.12.0" targetFramework="net451" />
<package id="angularjs" version="1.3.8" targetFramework="net451" />
After I noticed the build error I scheduled another build with Diagnostic level logging turned on, here is the excerpt from the build highlighting the errors
Task "Copy" (TaskId:395)
16:42:43.027 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.031 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Creating directory "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts". (TaskId:395)
Copying file from "Scripts\angular-aria.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.js". (TaskId:395)
Copying file from "Scripts\angular-aria.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.min.js". (TaskId:395)
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-csp.css" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\angular-messages.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.js". (TaskId:395)
Copying file from "Scripts\angular-messages.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.min.js". (TaskId:395)
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-mocks.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-scenario.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\bootstrap-select.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.min.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.js.map" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js.map". (TaskId:395)
I looked at the change log of my check-in and noticed that the errors occur for Angular script references that were updated. New angular references (adds in the TFS changeset) are being copied without errors. Example: angular-animate.js was edited
in the Angular update in TFS but angular-aria.js is a new file in the package so new file in TFS.
Using Source Control Explorer I verified the location of the files, the new and the existing files from the Angular nuget package can all be found in the Scripts folder of the MVC project. I can also view the content of each file file without issue.
The references in the project file (csproj) are all consistent too, I can't see any differences between the files that cause failure and those that do not. The following block is a direct copy/paste from the csproj file
<Content Include="Scripts\angular-animate.js" />
<Content Include="Scripts\angular-animate.min.js" />
<Content Include="Scripts\angular-aria.js" />
<Content Include="Scripts\angular-aria.min.js" />
<Content Include="Scripts\angular-cookies.js" />
<Content Include="Scripts\angular-cookies.min.js" />
<Content Include="Scripts\angular-csp.css" />
<Content Include="Scripts\angular-loader.js" />
<Content Include="Scripts\angular-loader.min.js" />
<Content Include="Scripts\angular-messages.js" />
<Content Include="Scripts\angular-messages.min.js" />
<Content Include="Scripts\angular-mocks.js" />
<Content Include="Scripts\angular-resource.js" />
<Content Include="Scripts\angular-resource.min.js" />
<Content Include="Scripts\angular-route.js" />
<Content Include="Scripts\angular-route.min.js" />
<Content Include="Scripts\angular-sanitize.js" />
<Content Include="Scripts\angular-sanitize.min.js" />
<Content Include="Scripts\angular-scenario.js" />
<Content Include="Scripts\angular-touch.js" />
<Content Include="Scripts\angular-touch.min.js" />
Is there anything I forgot to mention that would help me figure out what is going on?
What else can I try with the exception of rolling back the changeset and re-adding the nuget package?
Thank you very much in advance!
-Igor
-IgorHi Igor,
For your situation, make sure you checked in your source files after updating Angular. You can also check the whether the foders for the Angular reference are under source control in source settings tab of your build definition.
You can also build locally using MSBuild to see if the building works fine. We have to make sure local build succeed before VSO build since TFS build use MSBuild as its default compiler. Check the links below to see if they are helpful:
https://social.msdn.microsoft.com/Forums/en-US/f43ceb9e-f253-46e3-a496-05f8cd77f634/msb3030-could-not-copy-the-file-because-it-was-not-found-error?forum=winappswithcsharp
https://social.msdn.microsoft.com/Forums/en-US/01a29ce7-da2a-40af-9dce-3db1f8998cc2/could-not-copy-the-file-consoleappnameexemanifest-because-it-was-not-found?forum=TFService
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
I cant get my iphone to show up in my itunes. I downloaded the new update last night and I havent been able to sync it since
-
How to consolidating iTune Libraries from multiple Mac
I was using my Powerbook when I stationed oversea. Now that I am back home, I would like to move the music I have purhcased oversea and loaded on my Powerbook to the iTune librbary I have on my desktop without having to scan thru the CD one by one ag
-
Hi there i need some urgent help, i upgraded to ios 6.1.6 and now i cant seem to acces my app store and itunes.what do i need to do,its either blanc or msgs are encrypted.
-
Bank of America app no longer works.
My BofA app stopped working recently. Anybody know what's wrong? Thanks, DW Solved! Go to Solution.
-
SFTP Adapter Seeburger or Advantco ?
Hi, I need to suggest my client for a SFTP Adapter. Which one I need to suggest ? On performance and Cost? I would like to get a rough idea on cost for these? 1. Seeburger 2. Advantco Regards, Muhammed Nishad