Target file of the same name as source file

Hi,
    I am working on a file to file scenario. I need the target file name to be same as the source file name.
    I checked the adapter specific message attributes in the sender as well as receiver file adapter,and also checked the file name.
    Now am using variable substitution for the file name in the receiver file adapter.
    I defined the variable value as :
    message:FileName
   But no file is getting created in the destination folder.
   Can anyone help me out with this.
Thanks and regards,
Pravesh Puria.

Pravesh,
If you have selected File adapter --> Adapter Specfic Attribuest --> File name in the sender and receiver file adapter , then do not go for variable name substittutuion.
Just make a dummy file name in the receiver file adapter for the file name field and XI will automatically use the same file name as the source when creating the file.
Regards,
Bhavesh

Similar Messages

Is it possible to create a Clone database with the same name of source db ?

Is it possible to create a Clone database with the same name of source db using RMAN ...
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

Is it possible to search for multiple folders with the same name and...

Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

LMDB - SLD "Source and target system have the same object server name"

Hi,
the system is a SM7.1 SP1
For some reason (Object-Server-Name changed), the job that syncs the sld and lmdb cancels...
I set the LMDB-Object-Server-Name to its original Name...
Now i've deleted the sync-config in the solman_setup and try to start a new sync, but i get the following error, when i try to configure the source-system:
'Source and target system have the same object server name: CISM318'
But the names are different: 'SM3' (LMDB) and 'CISM318' (SLD)
Any suggestions ?
best regards
Christoph
Edited by: Christoph Bastian on Aug 26, 2011 9:37 AM
Edited by: Christoph Bastian on Aug 26, 2011 11:18 AM

problem solved...
Apparently the sync needs some hours to finish a object-server-name-change...
best regards
Christoph

Unable create a target file with the same name

Hi,
I have to pick an attachment from a web service and place the attachment in
a folder, with the same name (Attached File Name). I tried this using SOAP to file
scenario. Using SOAP, I'm able to get the attachment inside PI with the same
name, but not able to generate the file in the receiver end.
Please let me know if this is possible or else is there any other way to do
it.
Regards,
Deepak Ravi

Check also:
Combining three different aspects of PI (ASMA, AF Module and variable substitution) in one shot
Dynamic Configuration vs Variable Substitution - The Ultimate Battle for the File Name
Regards

Multiple image files with the same name

I have about 150 images that have been imported into a single lightroom folder that have the same name. These images are from a single event, so Id like to keep them together. The source files are in two different folders on my drive, but they all exist in one folder on lightroom. (for instance, I have two different images, both named CR-0917, both with different retouching). Initially, Lightroom allowed me to do all of my editing on all of the files in one place, even though the names were the same. I have since moved the source folders and files to a different location on my hard drive, but I can't update the files within the folder in lightroom, because lightroom chooses one source, so it gets about half the images right, and half wrong. I spent a ton of time retouching these images and I dont want to have to go back and redo it.
Is there a way to manually update the source information for each image, without Lightroom automatically using all of the images from a single folder? Or does anyone have any other ideas of what I can do? Please help...

I am puzzled about how this problem initially arised, too.
For the issue with several cameras I recommend the following:
1. If the camera lets you, specify a unique prefix so that each photo will have a unique name directly from camera.
E.g. Nikon lets you change their default prefix "DSC" to something else. As I even do not want to have recurring filenames after 10'000 shots I choose "yFL" as prefix, where y=number from 0..9, F=starting letter of ther first name of the camera owner, L=last name. Or other 2 digits that point to the camera model.
For current decade it is even nice to take y=1 for 2011 and so on. As I do roughly 10'000 shutters per year that fits about nicely. [Ok, as of 2020 I will use letters, too. 2046 I have to devise something else hoping that I will still be shooting photos with my same husband.]
2. If the camera does not facilitate such, as Canon: rename upon LR-import by putting a short prefix in front of the originial filename, e.g. yS90_, yG12_
I only want from a filename that it be unique in my household and that I have a rough idea where in sequence of time it may belong.
So if I get pictures from friends I put a prefix for them, too, while importing. Leaving the rest of their original filename is good for further communication about the pic.
I think usually LR takes more properties into account than just filename when deciding about duplicate, such as camera serial no., capture time etc.
Anybody who knows for sure?

Trying to backup one of my iPhoto libraries I keep getting a error message that basically says that the file could not be backed up because there is another file on the external drive with the same name, etc. There is no other file.

While trying to copy one of my iPhoto libraries to an external hard drive I get the following error message "You can’t copy “iPhoto Library old” because it has the same name as another item on the destination volume, and that volume doesn’t distinguish between upper- and lowercase letters in filenames." There is no other file on the external drive with this name. I have asked this question before and was told that there are some duplicate photos (files) in my library and I needed to go to "show file contents" and look at certain files to find duplicates and delete the duplicates. I did all of this and the library will still not copy and always stops copying in the exact same place on each attempt. Any help would be greatly appreciated.

You've been deleting your actual Photos.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Best way forward now is to recover the surviving Originals from this library and start over from scratch.
Regards
TD

Two groups with the same name in File and LDAP realms

Hi,
I configured WLS 6.0 SP1 to use an LDAP caching realm
as default one. In the LDAP server (Netscape Directory)
I have a group called Administrators. There is a group
with the same name in WLS own File Realm. When I click
on the Groups menu item in the administration console
I only get the Administrators group from the File Realm
listed. Is that expected? What will happen if I protect
a resource ti the Administrators group? Which one will
prevail - the one from the LDAP or the one from File
Realm? Or maybe the two will be merged?
Regards,
Plamen Petrov
AstraZeneca
Sweden

Hi
First of all I want to know that where you created your class, In SE24 or in any programm.
if in SE24, then go to se24 open that class go to methods tab and check if that method name accurs at two places, if not, then
click on that method and check the code.
or if in a program.
then you must have defined like
class <class name> definition.
public section
method <method name>
endclass.
class <class name> implementation.
method <method name>
code for that method.
endclass.
It might be possible you have set the implementation part twice for that particular method, So please check and delete one implementation for that method.
Thanks
Lalit Gupta

Updating vs. Deleting Folder files with the same name

Hello all,
Bear with me as I try to explain this.
First off, I'm a long time Windows user who just happily converted to Mac. I'm loving my mac so far, but I've run into a snag that I hope to get clarification on.
Let me set up a scenario on how this works with Windows.
Let's say I have two folders/root directories labeled as today's date "20100729" with image files in them. Each folder has different picture file names. In other words, the files in each of folders are different. The only thing that is the same is the Folder/Directory name, which in this case is "20100729".
So, in a windows environment let's say that each of these folders (with the same name) are located on 2 hard drives (A & B). If I take the folder from drive "A" and drop it in drive "B", windows seamlessly combines the files from both folders into one.
On the flip side, when doing the same thing on my Mac, the entire folder contents from drive B gets replaced from drive A, even though the file names are all different. Which is very annoying.
If you understand what I'm saying and know of a way for this to work the "Windows" way please let me know.
Thanks in advance for your help. Let me know if you need further clarification.
Cheers,
- Jeff

Use the ditto command in the Terminal, which is in the /Applications/Utilities/ folder; for instructions on its use, enter 'man ditto' without the quote marks into the Terminal prompt.
(53065)

I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. What can I do?

I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You

I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos. I can stand to re edit one or two projects, but not ALL.

How can I overwrite a file with the same name in Content DB?

Hi All,
In Content DB if I upload a file with the same name as a previous one, the application shows the warning message:
" ...You cannot upload "XXXXXX.doc" to "Test 1" because an item with the same name already exists ..."
And the alternatives are "Create Version" or "Cancel" the operation. Is there any way to overwrite a previous file as we can do it in Oracle Files ?
Regards
Harvey

Hi All,
Can anybody from the Content DB product development answer this question?
Regards
Harvey

After installing latest update Realplayer recording no longer works, I think Mozila is using a library file with the same name

After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.

I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
May the Force be with you.
Mark

My goal: "convert into pdf" -- the file is instantly saved with the same name as pdf. feasible?

Good evening dear experts,
i use Adobe Acrobat 9 pro extend to convert word, ppt, jepgs etc. into pdfs.
No if i
1) convert a ppt into a pdf: it asks --> "save as" --> converts --> opens the file
2) convert a jpeg into a pdf: it instantly --> opens the file as pdf --> i need to save it manual under "save as"
In both cases i want to
my goal: "convert into pdf" --> the file is instantly saved with the same name as pdf
WITHOUT asking me "save as" + "opening of the file".
Is the possible, and if yes, HOW ?
A fast answer is very very much appreciated, for i have to convert hundreds of files tonight in order to get it into 1 pdf
Thx and greetings from Germany,
Julia

We are nearly there!
A] - righclick "convert-to-method": @Bill: thx again, your approach worked for ppt, doc-files etc.
2 problems:
1) exception: for jpegs/bmps it doesn't work (the file is still opened after conversion, strange).
2) the output-folder. it only accepts the standard "output-folder documents/*.pdf" (which is a step further but not my end-goal). If i choose another output-folder via "browse", this setting is NOT SAVED (even after clicking on "accept" + "ok").
my goal: the the file should be automatically saved in THE SAME folder the original file is in (seems that can't be achieved and the standard folder is the only thing where to convert in?).
Personal background for understanding: i have many folders with several ppts in it. Once i send it out to a customer, i always have to convert it into a pdf. thats why i want to save time (i know that i can convert it directly + send per mail, but i want an up-to-date copy of the pdf in the folder as well).
B] - "the automated solution"- @Sandeep:
i just watched your link http://tv.adobe.com/watch/acrobat-tips-and-tricks/automating-tasks-in-acrobat/
about batch processing and i think its really helpful if i want to convert ALL of the files in one folder.
1 question regarding this: are the subfolders also affected?
As i understood from the video, i choose 1 "watched folder" and a "destination folder" (can be the same). E.g i have 1 big folder "designs" with many subfolders. I create a batch converting ppts to pdf to "the same folder" Once i run my batch, it converts ppts in the chosen folder "designs" + all subfolders into the same folder, right?
If this is the case, i get too many pdfs, for i only need the latest ppt-version to be converted (copies of old ppts are also in the files) ;(.
Do you have an idea how can i solve this?
Now we are very near to the end-solution of my goal:
i need this option "to the same folder" in my general settings when i convert a file via right-click. ATM it only works with the standard-folder documents/*.pdf
In A], my files are now instantly saved with the same name in 1 specific folder. I would be completely happy, if this folder would be alwys the same as the one with the original file (and not 1 specific folder)
2nd problem with a]: it does not apply to picture files (bmp, jpegs..)
So if we could solve this, i would be a completely happy girl
Guys, you are great, thx again for the whole struggle with my concerns!!

For each loop in case of more file with the same name

Hi, guys how works ForEachLoop in case of double file? Let's say that we got five excel file. A.xls, B.xls, C.xls, D.xls, A.xls. We got two file with A.xls. I'm going to assume that both file will be loaded. It's correct?
I'm asking this because I need to check if I got two file with the same name ( I got hundreds of file to load). And in the same time I need to avoid to load two file with the same title ( cause I could double the data)

If there are duplicate file names in subfolders then you should fill the variable with the complete path. See C in this images:
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Need help renaming a file to the same name as folder.

I am looking to loop through a directory full of folders each containing one file. I am wanting to change each file name in each folder to the same name as the folder. The code compiles fine, it just never actually does anything. Here is my code.
import javax.swing.JOptionPane;
import java.io.File;
public class filing
     public static void main (String [ ] args)
          File dir = new File("C:\\testing");
          File file;
          File cf;
          String dirs[ ] = dir.list();
          String folderName = "";
          if (dirs == null)
               JOptionPane.showMessageDialog(null, "Directory does not exist", "I can't find it", JOptionPane.WARNING_MESSAGE);
          else
               for (int i=0; i<dirs.length; i++)
                    folderName = dirs[ i ];
                    file = new File("C:\\testing\\"+folderName);
                    String changeFile[ ] = file.list();
                    cf=new File(changeFile[0]);
                    cf.renameTo(new File("C:\\testing\\"+folderName+".txt"));
          System.exit(0);
}

Nevermind. I figured it out.
Instead of cf=new File (changeFile[0]);
I added cf = new File ("C:\\testing\\"+folderName+"\\"+changeFile[0]);
thanks anyway!

Target file of the same name as source file

Similar Messages

Maybe you are looking for