Target file system layout in homogeneous DB copy

Gurus:
We have a target system whose file system layout is totally different from the source system in that:
1) the number of the file system is less than that in the source;
2) the size of each targte file system is also different from the source system.
BTW way the target has a DB running.
Can we go ahead to do the import without doing anything on above differences? i.e just go ahead to overwrite the target
DB?
Oracle on Unix.
Thanks a lot!

Hi,
its better and recommemded by SAP if you have the same DB instance SID and SAPSID.
If the target system has different SID than the source that will be more work to do for you. its makes things easyer if you have the same name as the source system.
You have two different file system and different SID. So its better to minimize those things if you can.
I think in this step where you are, I would prefer to deinstall oracle on the target system and install it again with the SAP recommendations for SAP Software which you will find on the installation guide. Because you wrote that oracle is already installed on the target system but without SAP. This means the installation was not for SAP and its different to SAP recommended..
Chooce also Oracle DB instance name and SAPSID the same name.
Good luck
HaneAtik

Similar Messages

Target file system

Hi all,
Can any one explain me how can we assign target file system dynamically.
Thanks in Advance
Naveen

You should be able to do it in a <b>receiver adapter module</b> by using a free ftp library like apache commons for easy implementation.
regards
krishna

File System Layout

Hi
can anybody tell me is there any transaction code or table corresponding to file system layout .For example it should contain details like file system(path) size and mount.
thanks in advance

HI Jasmine
For application server files, please check if transaction AL11 can help you.
Kind Regards
Eswar

Multiple files picked and to zipped at target file system

Hi
In my scenario multiple files to be picked from FTP server by using Sender File Adapter then it has to be Zipped at the receiver file system.
Please help me in this scenario.
Sri

Hi,
>> In my scenario multiple files to be picked from FTP server by using Sender File Adapter then it has to be Zipped at the receiver file system.
First you need to pick multiple files by using advance selection source at file sender adapter.
Once it' is picked use module name is: AF_Modules/PayloadZipBean in receiver file system for zipping files
Pls ref the blog :
/people/stefan.grube/blog/2007/02/20/working-with-the-payloadzipbean-module-of-the-xi-adapter-framework
Abid Mazhar.

File system layout & cylinders

I just did a fresh install of Solaris 9 8/03 on an Ultra Enterprise 450. When it came time to partition the disk, I chose the custom option. I then input the size of each file system for the the correct FS. Now when I look at the disk using the format command, it shows that the swap FS starts at cylinder 0 and root starts at 2026. I always thought that root should start at cylinder 0. I was never prompted for starting cylinders when partitioning the disk.
Here is the output from the format command:
Volume name = < >
ascii name = <SEAGATE-ST318404LC-0002 cyl 14187 alt 2 hd 6 sec 421>
pcyl = 14189
ncyl = 14187
acyl = 2
nhead = 6
nsect = 421
Part Tag Flag Cylinders Size Blocks
0 root wm 2026 - 4457 2.93GB (2432/0/0) 6143232
1 swap wu 0 - 415 513.09MB (416/0/0) 1050816
2 backup wm 0 - 14186 17.09GB (14187/0/0) 35836362
3 unassigned wm 810 - 2025 1.46GB (1216/0/0) 3071616
4 var wm 4458 - 7700 3.91GB (3243/0/0) 8191818
5 usr wm 7701 - 14186 7.81GB (6486/0/0) 16383636
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
Does this look OK or should I reformat/restart the installation?
Thanks

when I look at the disk using the format command, it
shows that the swap FS starts at cylinder 0 and root
starts at 2026. I always thought that root should
start at cylinder 0. I was never prompted for
starting cylinders when partitioning the disk.Swap should start at the beginning of disk - right after the volume label (designating this is Solaris) -- this allows for future upgrades of the OpSys. Having swap at the start is generally faster on Solaris. IIRC LiveUpgrade designates that swap must be at the beginning to help with upgrades of the OpSys during a live system operation.
Other filesystems and operating environments - AIX for example - allows you to select Inner/Outer slices and allows more fine tuning for performance; near as i can tell that is not an option when building SUN Solaris systems.
HTH/Sx

Solaris 10 - File System Size / Layout

Hello, I�m very new to Solaris OS � UNIX world and have a question around the file system.
I have SUN System with a single 36GB of Hard Disk, and eventually I want to install Oracle 10g on it as a development server for myself.
My question is around the file system size and layout
I have installed Solaris 10 and accepted the default file system, which is as below:
Filesystem size used avail capacity Mounted on
/dev/dsk/c1t1d0s0 5.0G 3.4G 1.6G 69% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 1.5G 1.1M 1.5G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1 5.0G 3.4G 1.6G 69% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1 5.0G 3.4G 1.6G 69% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
swap 1.5G 136K 1.5G 1% /tmp
swap 1.5G 88K 1.5G 1% /var/run
/dev/dsk/c1t1d0s7 28G 28M 28G 1% /export/home
What I don�t understand is when I eventually install Oracle, where will the directory go for it?
The /home/export folder is aprrox: 28GB which is now taking up most of the space, and I understand that this is for users, therefore my question is:
1.Should I have allocated a more space to the root file system for oracle during the OS install?
2. If so what should I do? (its not a production system and I know it will have to go somewhere on the single drive, I�m happy to rebuild as I�m still learning the OS).
Any suggestions?
Rgds
D

Thanks, I do have this but needed info on the file system layout... but I have the info now...
If you select the auto file system layout on Solaris 10 then it gives the remaining space to the home/export . I have since re-installed, customised the file system layout and have space for the database.
D

Using old file system backup for Cloning

I have taken an off-line backup of Oracle 11i (11.5.10.2) 15 days ago. Before taking backup of file system , I verified that all the latest Rapid Clone Patches are applied. No changes or patch work in APPL_TOP or DB has been done since that backup. Now I need to do cloning of this instance, how I can use this backup for Cloning.
Rapid Clone scripts create and generate some files/directories so I am not sure whether my Old backup of file system will work or not. What is the best way to use old backup for cloning , also what are the file and directories in addition to the old backup of file system which I need to copy to Target System.
Thanks for reviewing and suggestions.
Samar

Samar,
If you have run preclone before backing it up, your backup should be valid for cloning.
2.1 in the cloning doc has to be in the backup.
These doc's should clear out yours doubts on cloning.
Cloning Oracle Applications Release 11i with Rapid Clone
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1
FAQ: Cloning Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1

ASM vs ext3 File system(mount point)

Please suggest which one is better for small databases.
ASM or ext3 File system(mount point)?
Any metalink note.

ASM better if you do not want to play with I/O tiuning, (if you tune ext3 file system it woud be the same from performace view),
but it more compilcated for admininstering database files in ASM then in ordinary file system.
Oracle is recomending to use ASM for database file system.
I woud think if you have some development database and nead a lot of cloning, moving of datafiles its better to use ordinary file system,
so you can use copy OS comands, not so complicated.
If you nead some striping, miroring, snapshoting from ext3 you can use LVM on unix/linux.
I am not sure but I think what striping or miroring is better on ASM then on LVM, becouse ASM is doing it better for databse I/O.

1.1.4 and new file system

Does 1.1.4 have a new file system?
I upgraded to 1.1.4 using iTunes. Now I am unable to load any application packages that are normally displayed by the installer.
When I tried to view what is in the iphone I see that the file system layout is different - there is only root.
Did I upgrade wrongly? or did I do it on a wrong day .
THanks

Let me explain in case you didn't already know: the iPhone currently has two restrictions:
1. it can only be used with one carrier (e.g. AT&T in the US)
2. You cannot download any applications on to it.
Installer is a 3rd party app which allows you to download applications, but if you use it, you void your iPhone warranty.
In updating to 1.1.4, you have probably wiped installer of the iPhone, and are back to a standard iPhone (hopefully) - any 3rd party apps that were on the phone will have been wiped as well.
If you want more apps, the I would wait until late June, when version 2.0 will be released, which will allow you to download Apple-approved apps, without voiding your warranty.
Hope this helps.

ECC6 EHP2 (ABAP+Java) system copy using file system copy

Hello Experts,
I have a question around system copy method for a dual stack ECC6 EHP2 system.
We are planning to take full file system backup of this entire ECC6 EHP2 dual stack system and throw it on a completely new hardware with new host name but same SID. We are also planning to do a host renaming in instance profiles and re-building the control files in target system after we finish the file system restore.
Is this method supported in SAP ? Or we strictly have to use SAPinst to do export and import method. In any case our source and target platform is not going to chance as per our scenario.
Any suggestions will be greatly appreciated.
Thanks,
Harshal

> Thanks for the quick response. Is their any document that says it is not supported ? Because of no proper document that says no to do it, client want's to try it out.
For the ABAP part this is certainly feasible.
The Java part has not only issues with the secure store but also with SID and hostname. The old values are stored in many places in the database and in, depending on the applications installed, many .properties files in the filesystem. So it would be not enough to somehow regenerate the secure store but also change hostname and SID in different places that are not really all documented.
What you are basically looking for is
Note 757692 - Changing the hostname for J2EE Engine 6.40/7.0 installation
with the significant sentence
This note should be applied only when the hostname of a machine
where the j2ee engine was already installed has changed.
It does not replace the SAP official system copy procedure and
MUST NOT be used for copying of an instance to another host and/or with different SID.
Markus

Cannot find some .TOC file in TDSHL homogeneous DB copy

We are at the import stage of a homogeneous DB copy for an ABAP only BW
system.
This homogeneous copy is a part of a TDMS shell creation.
In import_monitor.log we see errors as follows:
ERROR: 2010-12-29 21:55:19 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDDIM' import package is interrupted with exception.
java.io.FileNotFoundException: DATA/SAPDDIM.TOC
at com.sap.inst.migmon.LoadTask.writePathEntry
(LoadTask.java:1029)
at com.sap.inst.migmon.LoadTask.createCommandFile
(LoadTask.java:736)
at com.sap.inst.migmon.LoadTask.processPackage
(LoadTask.java:318)
at com.sap.inst.migmon.LoadTask.run(LoadTask.java:195)
at java.lang.Thread.run(Thread.java:534)
at com.sap.inst.lib.util.ThreadDispatcher$ThreadWrapper.run
(ThreadDispatcher.java:113)
ERROR: 2010-12-29 21:55:19 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDFACT' import package is interrupted with exception.
java.io.FileNotFoundException: DATA/SAPDFACT.TOC
at com.sap.inst.migmon.LoadTask.writePathEntry
(LoadTask.java:1029)
at com.sap.inst.migmon.LoadTask.createCommandFile
(LoadTask.java:736)
at com.sap.inst.migmon.LoadTask.processPackage
(LoadTask.java:318)
at com.sap.inst.migmon.LoadTask.run(LoadTask.java:195)
at java.lang.Thread.run(Thread.java:534)
at com.sap.inst.lib.util.ThreadDispatcher$ThreadWrapper.run
(ThreadDispatcher.java:113)
In the exported dump directory, we truly cannot find above TOC files.
We did not have any ERROR during the export phase.
According to my experience, this might be caused by the fact that this ABAP BW system has a JAVA add-on
on a different server with a dfferent SID than the ABAP SID -- but the JAVA DB is in the same database as the ABAP but with a different schema. Therefore when we do export source system->central system->ABAP based, those TOC files could not be created. However I do not have the document created in my previous project, I cannot verify my impression.
Are SAPDDIM and SAPDFACT standard SAP objects?
Please help input your opinions.
Thanks!

Pankaj and Anoop:
1) I have removed all lines starting with 'D ' in the problem *.TSK files and run again.
However, it's still looking for the non-existing *.TOC file. Here is the log:
/usr/sap/QAS/SYS/exe/run/R3load: START OF LOG: 20101231190309
/usr/sap/QAS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/
R3ldmain.c#5 $ SAP
/usr/sap/QAS/SYS/exe/run/R3load: version R7.01/V1.4
Compiled Feb 24 2009 21:41:52
/usr/sap/QAS/SYS/exe/run/R3load -i SAPZPVAL.cmd -dbcodepage 1100 -l SAPZPVAL.log
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(TFH) ERROR: Unable to open /shellexport/ABAP/DATA/SAPZPVAL.TOC
(TFH) ERROR: OS error message: No such file or directory
/usr/sap/QAS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/QAS/SYS/exe/run/R3load: END OF LOG: 20101231190309
2) Therefore I create a dummy file as follows:
touch /shellexport/ABAP/DATA/SAPZPVAL.TOC
However, it fails again with logs as follows:
/usr/sap/QAS/SYS/exe/run/R3load: START OF LOG: 20101231190359
/usr/sap/QAS/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/
R3ldmain.c#5 $ SAP
/usr/sap/QAS/SYS/exe/run/R3load: version R7.01/V1.4
Compiled Feb 24 2009 21:41:52
/usr/sap/QAS/SYS/exe/run/R3load -i SAPZPVAL.cmd -dbcodepage 1100 -l SAPZPVAL.log
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(RD) ERROR: unexpected end of file "/shellexport/ABAP/DATA/SAPZPVAL.TOC"
/usr/sap/QAS/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/QAS/SYS/exe/run/R3load: END OF LOG: 20101231190359
3) here is the TSK file
more SAPZPVAL.TSK (new, without lines starting with D)
T /BIC/AZPD_IVAL00 C xeq
P /BIC/AZPD_IVAL00~0 C xeq
T /BIC/AZPD_IVAL40 C xeq
P /BIC/AZPD_IVAL40~0 C xeq
more backup_TSK/SAPZPVAL.TSK (old, w/ the lines starting with D)
T /BIC/AZPD_IVAL00 C xeq
D /BIC/AZPD_IVAL00 I xeq
P /BIC/AZPD_IVAL00~0 C xeq
T /BIC/AZPD_IVAL40 C xeq
D /BIC/AZPD_IVAL40 I xeq
P /BIC/AZPD_IVAL40~0 C xeq
In the import_monitor.log, we see:
TRACE: 2011-01-02 18:21:29 com.sap.inst.migmon.LoadTask run
Loading of 'SAPZPVAL' import package is started.
INFO: 2011-01-02 18:21:29 com.sap.inst.migmon.LoadTask processPackage
Task file '/oracle/backup2/W7C/sapinst_instdir/SAPZPVAL.TSK' from package 'SAPZP
VAL' contains no tasks with data type (D).
4) We have multiple packages with the same ERROR. So far none of them is fixed by removing the D lines.
Above are just examples.
5) BTW, DbSl Trace: ORA-1403 when accessing table SAPUSER is NOT a concern here because the logs
of some successfully imported packages also have the same message.
Could you please tell whether you had the same situation? ?
Thanks!

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane

Copy & paste embeded object to file system

Cross-post at:
http://stackoverflow.com/questions/27685791/copy-paste-embeded-object-to-file-system
Background:
I wrote a large piece of VBA code in an Excel workbook to help handle a lot of repeating jobs. I found it is painful to maintain and modify the code by using the "pool" VBA Editor. Then, I decided to move those VBA code to C# solutions, which I
suppose I can benefit from the modern editor - Visual Studio.
Problem:
Although I don't know too much about VBA, I know even less about C#. Hence I got some problem when I try to "translate" my VBA code to C#, and here is one of them:
I create a document-level solution for Excel. I need to embed some files (.cab, .exe) into the solution, so when I run a method (e.g. by clicking a button), those files will be copied to the file system, and do some job.
In VBA, I embedded those files in the Excel workbook, then I can copy the embedded objects to the clipboard by using the following VBA code:
Sheet1.OLEObjects("obj_cab").COpy
And then I can paste the object to the file system by using the following VBA code:
CreateObject("Shell.Application").Namespace("C:\Sample\").Self.InvokeVerb "Paste"
In the C# solution, I can use the following equivalent method to copy the embedded object to the clipboard:
Microsoft.Office.Interop.Excel.OLEObject OLEobj = (Microsoft.Office.Interop.Excel.OLEObject)sheet1.OLEObjects("obj_cab");
OLEobj.Copy();
Then I stuck here, I don't know how to get this object from clipboard and put it to the file system. The 'CreateObject' method does not exist in C#.
Anyone can help? Either a better way to embed those files or a working way to paste those objects (files) from clipboard to the file system?
Thanks a lot!

Hi FantaC,
It's possible to save the oleobject to the disk. But it's not very simple. Because when you call the Copy method of OLEObject to clipboard, it's actually not the exact the oleobject file itself, it's actually a wrapper of the file, it means that it has different
file headers and some other information from the original oleobject file.
To save oleobject on the disk, you need to analyze the byte array by yourself, this would be a little complicated. You could check the answer in this thread for the code sample:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/1ab7a178-8021-4c67-a14b-5031a254fd9c/saving-oleobject-content-to-a-file
The original poster of this thread also write a blogpost about this, you can check it here:
Saving OLEObject Content To File
Detailed information and code samples are provided in this blogpost.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to copy NCLOB value(Contains Word Document) into file system

How to copy NCLOB value(Contains Word Document) into file system or display in sqlplus

The UTL_FILE package will write it only to text file not(NCLOB Value[containts images as well as text])

Microsoft.WebApplication.targets 182 5 error MSB3030 Could not copy the file because it was not found

We use Visual Studio Online and the integrated continuous integration (build server) from Microsoft. We have a solution that contains multiple projects two of which are latest MVC projects. I updated a bunch of our Nuget packages yesterday and now we are
getting a build error one of our MVC projects. Any help is greatly appreciated as I have exhausted my resources trying to understand why the error is occurring!
We use nuget for our external libraries, the solution and projects and set to use Nuget Restore (no packages persisted in TFS).
We updated Angular to the latest version using Nuget updates inside of visual studio. Here an excerpt from packages.config in the project file. The first block is what was found in the packages.config before the update and the second block is after the
update.
<package id="Angular.UI.Bootstrap" version="0.11.0" targetFramework="net451" />
<package id="angularjs" version="1.2.23" targetFramework="net451" />
<package id="Angular.UI.Bootstrap" version="0.12.0" targetFramework="net451" />
<package id="angularjs" version="1.3.8" targetFramework="net451" />
After I noticed the build error I scheduled another build with Diagnostic level logging turned on, here is the excerpt from the build highlighting the errors
Task "Copy" (TaskId:395)
16:42:43.027 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.031 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Creating directory "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts". (TaskId:395)
Copying file from "Scripts\angular-aria.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.js". (TaskId:395)
Copying file from "Scripts\angular-aria.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.min.js". (TaskId:395)
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-csp.css" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\angular-messages.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.js". (TaskId:395)
Copying file from "Scripts\angular-messages.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.min.js". (TaskId:395)
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-mocks.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-scenario.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\bootstrap-select.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.min.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.js.map" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js.map". (TaskId:395)
I looked at the change log of my check-in and noticed that the errors occur for Angular script references that were updated. New angular references (adds in the TFS changeset) are being copied without errors. Example: angular-animate.js was edited
in the Angular update in TFS but angular-aria.js is a new file in the package so new file in TFS.
Using Source Control Explorer I verified the location of the files, the new and the existing files from the Angular nuget package can all be found in the Scripts folder of the MVC project. I can also view the content of each file file without issue.
The references in the project file (csproj) are all consistent too, I can't see any differences between the files that cause failure and those that do not. The following block is a direct copy/paste from the csproj file
<Content Include="Scripts\angular-animate.js" />
<Content Include="Scripts\angular-animate.min.js" />
<Content Include="Scripts\angular-aria.js" />
<Content Include="Scripts\angular-aria.min.js" />
<Content Include="Scripts\angular-cookies.js" />
<Content Include="Scripts\angular-cookies.min.js" />
<Content Include="Scripts\angular-csp.css" />
<Content Include="Scripts\angular-loader.js" />
<Content Include="Scripts\angular-loader.min.js" />
<Content Include="Scripts\angular-messages.js" />
<Content Include="Scripts\angular-messages.min.js" />
<Content Include="Scripts\angular-mocks.js" />
<Content Include="Scripts\angular-resource.js" />
<Content Include="Scripts\angular-resource.min.js" />
<Content Include="Scripts\angular-route.js" />
<Content Include="Scripts\angular-route.min.js" />
<Content Include="Scripts\angular-sanitize.js" />
<Content Include="Scripts\angular-sanitize.min.js" />
<Content Include="Scripts\angular-scenario.js" />
<Content Include="Scripts\angular-touch.js" />
<Content Include="Scripts\angular-touch.min.js" />
Is there anything I forgot to mention that would help me figure out what is going on?
What else can I try with the exception of rolling back the changeset and re-adding the nuget package?
Thank you very much in advance!
-Igor
-Igor

Hi Igor,
For your situation, make sure you checked in your source files after updating Angular. You can also check the whether the foders for the Angular reference are under source control in source settings tab of your build definition.
You can also build locally using MSBuild to see if the building works fine. We have to make sure local build succeed before VSO build since TFS build use MSBuild as its default compiler. Check the links below to see if they are helpful:
https://social.msdn.microsoft.com/Forums/en-US/f43ceb9e-f253-46e3-a496-05f8cd77f634/msb3030-could-not-copy-the-file-because-it-was-not-found-error?forum=winappswithcsharp
https://social.msdn.microsoft.com/Forums/en-US/01a29ce7-da2a-40af-9dce-3db1f8998cc2/could-not-copy-the-file-consoleappnameexemanifest-because-it-was-not-found?forum=TFService
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Target file system layout in homogeneous DB copy

Similar Messages

Maybe you are looking for