Target Group to Channel - Trying to use 2 channels when only 1 is specified

I have created a Target group and then in the marketing planner create a campaign. Under the channel I have specified Phone which is linked to creating a transaction. I activate the campaign and then choose target group to channel.
The job is scheduled and does run.... However it ends in error saying "No Mail form exist for communication channel Email"
so no transactions are saved.
I am confused as I only specified the channel to be Phone NOT email..... I do not want to send any emails for this.
Has anyone encountered this problem before and can they advise on the solution.
Many Thanks
Caroline

So is question too easy that no one wants to respond?  Since the new 10.7.3 update I can see the same result on the file sharing page where it shows who's logged in. Am I the only showing 2 of the same users logged in?
I was thinking because I created users and then deleted them, and the re-created the same users that's why it's occurring. When I log in from a windows machine I only see 1 user with a SMB share. But when I log in from Mac I see 2 users with the AFP share. Both users are exactly the same.
Here's one more bit regarding this. If I log in on Mac with Lion then there are 2 duplicate users and if you wait a few minutes only 1 of duplicate users will show time. The other does not. But if I log in from a Mac with Snow Leopard then it shows 2 duplicate users as above but neither of them show any time.
I can't be the only peron having these problems can I?
So if these duplicate users were caused from me creating and deleting users, where (what file) is the user name stored?
Please someone.
Tony

Similar Messages

  • Target group to channel

    I have created  a new campaign and assigned products , channels and taget group to campaign.
    i have changed campaign status to ' Released'.
    When i m trying to send Email to Target Group , that option was grayed out . Please le me know if i need any changes .
    Regards,
    Ravi kumar

    Hi Ravi,
    Can you please check for following settings are maintained
    In the Campaign Screen.
    Basic Data Tab
    Piority : high/medium
    Transfer to ERP : Generally should be unchecked
    Status : Released
    Campaign Element Screen
    Channels Tab
    Communication Medium : INT
    Form for Email : ( maintain the mail form which you want to send)
    Work flow task : CA1 Send target group to channel
    Segmentation Tab
    Maintain target Group
    Go to the campaign automation screen using F5
    Drag and drop the start node and element side by side and connect using connection
    In the start node of the campaign automation
    schedule the campaign
    After starting the campaign check the status and log in the start node as well as element in the campaign automation screen.
    Status should be released
    Log should have completed.
    Hope it helps
    Please reward points if it helps.
    Regards,
    Madhu

  • Target Group to Channel Job

    Hello
    When we use the "Target Group to Channel" Job, and assign a template activity that has a product associated, this product isn't copied to the activities created for the job.
    Does anyone can help me?
    Best regards

    I have checked SWU3 and all is OK.
    WS14000060 - Send Target Group to Channel is the workflow that isn't starting.
    I've checked the agent assignment and it is set as general task which is what the implementation document says to do.
    Regards
    David

  • I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?

    I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?

    It's almost certainly too late.
    The time to create a backup is before a catastrophe.  After a catastrophe, it's too late.

  • I am trying to use ichat and when I try to log in it says my account has been suspended bc of suspicious use...help

    i am trying to use ichat and when I try to log in it says my account has been suspended bc of suspicious use...help

    Hi,
    I would guess this is  an AIM valid Screen Name such as an Apple issued @mac.com account.
    I would also guess you travel to other countries.
    There have been several posts about @mac.com names and people who travel and use their Screen Name elsewhere having the name Suspended.
    Can you Log in here  https://settings.aim.com/ ?
    Is this where you saw the Suspended message ?
    For AIM issued name the answer is to change your Password as this tends to prove you own the account.
    This does not work for Apple IDs used as  AIM Valid Screen Names as AIM can't tell when the password is changed (They can only see it when you log in)
    AIM's Suspended Account page has an email ([email protected]) on it to contact if your account remains Suspended.
    However you need to be very clear that you have an Apple Issued Name and that you know that resetting the password that works for AIM Names and that you would like them to reset the account.
    More recently this has been a sticking point.  It seems the Contact you get does not always know about the agreement that AIM recognises Apple Issued IDs as Valid Screen Names and that the AIM  servers can only view the passwords at specific times (or at least confirm them) so you changing it will make no difference and that they have to step in manually.
    10:39 PM      Saturday; October 20, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I am trying to use pages.  When I open a blank document and enter text, nothing appears on the document.  What is the problem?

    I am trying to use pages.  When I open a document and begin entering text, nothing shows up on the document.  I cannot see what I am typing.  What is the problem and what am I doing wrong.

    Thanks Jerrold.  But I am opening a word processing document.  The same thing happens when I select a blank layout page.  I try to put in shapes and nothing appears.  When I click around on the blank word processing document the verbage will appear in a green color but when I type, I still cannot see what I am typing. I have tried to uninstall and reinstall and this did not help. 
    Thanks Again

  • HT201335 I have a UK apple mac and im trying to use mirroring so when searching google, ebay, writting document it shows up on my tv but i dont have the option when i click on the rectangular box in lower right hand corner. ANy one have advice?

    I have a UK apple mac and im trying to use mirroring so when searching google, ebay, writting document it shows up on my tv but i dont have the option of 'Mirroring' when i click on the rectangular box in lower right hand corner. Anyone have advice on how I can do this?

    Welcome to the Apple Community.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.
    Do you meet these requirements.

  • HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

    i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

    <http://support.apple.com/kb/HT5891>
    You can use USB for the Apple trackpad.
    <http://www.mobeetechnology.com/the-power-bar.html>

  • I'm trying to use iPhoto but when I put my cursor over the photo it has a small flag over the left hand corner and a downward arrow in the bottom right corner.  It won't let me pull up a photo

    I'm trying to use iphoto but when I put my cursor over a photo it has a small flag in the upper left hand corner and a downward arrow in the lower right corner.  I've used it lots but it just started doing this.  My events pull up just not a single photo.

    Try rebuilding your iPhoto Library. Here's a link:
    http://support.apple.com/kb/HT2638

  • I am trying to use eprint and when I login it says my email address isnt registered

    i am trying to use eprint, it says login, login says I am not registered, so I use create function, it says my email address in already in use, so I try retrieving password, then it says email address doesnt exist. so I can not use eprint.

    Hi,
    I would guess this is  an AIM valid Screen Name such as an Apple issued @mac.com account.
    I would also guess you travel to other countries.
    There have been several posts about @mac.com names and people who travel and use their Screen Name elsewhere having the name Suspended.
    Can you Log in here  https://settings.aim.com/ ?
    Is this where you saw the Suspended message ?
    For AIM issued name the answer is to change your Password as this tends to prove you own the account.
    This does not work for Apple IDs used as  AIM Valid Screen Names as AIM can't tell when the password is changed (They can only see it when you log in)
    AIM's Suspended Account page has an email ([email protected]) on it to contact if your account remains Suspended.
    However you need to be very clear that you have an Apple Issued Name and that you know that resetting the password that works for AIM Names and that you would like them to reset the account.
    More recently this has been a sticking point.  It seems the Contact you get does not always know about the agreement that AIM recognises Apple Issued IDs as Valid Screen Names and that the AIM  servers can only view the passwords at specific times (or at least confirm them) so you changing it will make no difference and that they have to step in manually.
    10:39 PM      Saturday; October 20, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I'm trying to use FaceTime but when I try to log in, the system tries to verify and gives me a number to call Apple to complete registration.  Is there anything I can do?

    I'm trying to use FaceTime from my IMac OS Version 10.8.5 but when I try to log in, the system tries to verify and gives me a number to call Apple to complete registration.  Is there anything I can do? 

    There is no official public documentation of that alert as far as I know.
    If you're trying to sign in to FaceTime, try to sign in to iMessage in the Messages application, or vice versa.
    Otherwise, do as the alert directs. According to reports, you won't be charged for the support call if you select "Apple ID"—not the hardware model—as the product you're asking about, and cite the "customer code" in the alert as the "validation code" when you speak to the Apple representative.

  • Gimp program won't let me type anything it just tries to use shortcut keys when I type

    I got the gimp app and it won't let me use the keybard to type in to rename, or anything, it keeps trying to use the keyboard for shortcuts

    Solution to this known bug is to upgrade to GIMP 2.8.10. Worked for me.

  • I recently updated to Lion and iCloud and am unable to send a group email for my blog using BCC.  When I try to do so, the email goes directly to draft.  Please help.

    How can I send a group email for my blog to using BCC on my mail program?

    Don't use bcc, use cc instead. Better yet create a new group in Address Book, put the contacts you want into the group, then when you email select the group in the To: field instead of putting in individual email addresses.

  • I have an iphone 4 and recently ive been trying to use facetime but when it connects it hangs up before i can even see a face

    I need help seriously. I have turned my phone off then on I've reset it by using the home and power button idk what to do I'm really getting mad at my phone. I know stupid first world problems :(

    Maybe updating iOS to 7.1 will fix it.
    <http://www.macrumors.com/2014/04/17/ios-6-facetime-issues/>

  • Problem using af:inputfile when only file name is given without path.URGENT

    Hai Friends,
    I am using input file type and <h:commandLink to upload a file. But when I type only the file name without the path like(hello.jpg) and try to submit then a javascript error occured "Access is denied". But my requirement is when i type without the path, that is only the file name i need to do some validations, like appending a global path with this file name and upload the file... the following is the code am having...
    <af:form id="address" usesUpload="true" >
    <af:inputFile id="id" value="#{BKb.batchFile}"/>
    <h:commandLink action="#{.uploadFile}">
    <h:outputText value="Upload" styleClass="buttonNoDecoration"/>
    </h:commandLink>
    <h:commandLink action="#{BKb.clearFile}">
    </h:commandLink>
    </af:form>
    can u help me in this issue...
    Thanks in advance,
    Ciya

    I figured out the problem, and it was caused by JHeadstart. I placed a default display value in JHeadstart for the download link. This caused a default values bean to be created by jheadstart and that bean was what was causing my problem. The download link had a display value, but not a valid path. I removed the default value, re-generated the screen and it is totally fixed. I have pretty much decided that it is never a good idea to use a default value in Jheadstart.
    Thanks for your help,
    Michelle

Maybe you are looking for