Target is too Small to Hold Data (IES 10901)(WIS 10901) Webi Vs.Rich Client.

Hi All,
I am getting the attached error, when Refreshing the Report in Web Intelligence.
However, I am able to Successfully Create and Refresh the Same report in WEBI RICH CLIENT.
I am able to successfully run the query in "Teradata SQL Assistant"
I am just Retrieving 1 month of Data.
Our Database is TeraData.
Please advise, what is causing the issue. Appreciate your swift Response. Need to send this report for UAT by tomorrow.

Hi Kulbir,
This Report is not Live to schedule the report. It is under Build phase. I need to send this report UAT(User Acceptance Test). I afraid, they may get same error, when they try to refresh the report.
- Refresh the report is one of the Test case. This Test case should pass without any error.
Aswell, for your question: I am applying Sum function for the reocords at Universe Level. Not at the Report Level. I have not used any report level Variables.

Similar Messages

The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.

We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on ADO NET Source returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more
information about the failure.
Anything that we can do to fix this?

Hi,
Tried both....
* Having schema type as Nvarchar(max). - Getting the same error.
* Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
[OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure.
Additional Info:
* Here the Source task is getting failed not the conversion or destination task.
Thanks,
Loganathan A.

Error: target terminated too early to collect data

I want to run instruments to collect some memory information, from an iPhone running adhoc provisioning... when I launch the application from the XCode/Instrument/Object Allocation Tool, it launches the application fine on the iphone, but I get the following error message, on the instrument, hence no data is collected on the instrument.
"target terminated too early to collect data"
does anybody know whats going on..?

Hi Kulbir,
This Report is not Live to schedule the report. It is under Build phase. I need to send this report UAT(User Acceptance Test). I afraid, they may get same error, when they try to refresh the report.
- Refresh the report is one of the Test case. This Test case should pass without any error.
Aswell, for your question: I am applying Sum function for the reocords at Universe Level. Not at the Report Level. I have not used any report level Variables.

Error (IES 10901) (WIS 10901) when using Excel 2010 file as data source..

Hello,
I have a annoying issue with using an excel 2010 file as a data source for a universe. Here is the background information.
Setup.
Client: Laptop running Win XP 32bit, Client tools installed with SP2 v9 (latest)
Server: Win 2008 x64, BOE 4.0 SP2 v9 (latest)
Task:
1. On Client, with information design tool, created Project, DB Connection, Data foundation using an excel source on a share
server\share\data.xlsx
2.. Published everything to Repository
3. Try to load univerise in Web Intelligence via creating a new report. I Drag accross the dimensions. When i go to preview data recieve error
Database error: [Microsoft][ODBC Excel Driver] External table is not in the expected format.. (IES 10901) (WIS 10901)
4. If i change the excel file to a 2003 format *.xls it all works correctly. Issue being that 2003 cannot hold as much data as a 2010 file so i need to use 2010.
Extra Notes:
1. Both the client and server have the latest Access drivers http://www.microsoft.com/download/en/details.aspx?id=13255
2. Both client and server have a system DSN setup using the 32bit ODBC, same DSN names to the network share.
3. The data excel source sits on the server on a share.
4. I am believing that the isssue is within the area of BOE as when you connect to the excel file via ODBC using crystal 2011, you need to right click on the connection and tick "System Tables" to be able to use the excel 2010 file. The BOE Information design tool does not seem to have this option??
Any advice with this would be great?
thanks
david

Issue Resolved:
Install
Access Database Engine 2010 Service Pack 1 on the server
http://support.microsoft.com/kb/2460011
Reboot server once completed.

I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%) If I move the application window to another screen it adjusts it correctly – leaving all the pallettes, menus and tools correctly sized as they are on the retina display Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see? There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light. MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
If "open in low resolution" is unckecked the appearance is good but the very small size.
See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (IES 10901) (WIS 10901)

Hi,
We have BO XI 4 running on BI 7.0 running on same 64 bit windows server. We intergrated with BI and tried creating the Web Intelligence reports on top of a universe sitting on cube. The Web Intelligence produces results/report when we used one dimension.
When we use more than one dimension, we get the following error.
Database error: The MDX query SELECT { } ON COLUMNS , CROSSJOIN( [0D0CUMENT].[LEVEL01].MEMBERS, [0MATERIAL].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM [$Z02_C01] failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (IES 10901) (WIS 10901)
Can someone please help with this?
Thanks,
Briston

Hi,
I tried placing the librfc32.dll in the usr\sap\BI7\SYS\exe\uc\NTAMD64 folder. Could it be that I might have used the wrong version of dll?
Thanks,
Briston

Failed to execute MDX query. Reason: returned server error (). (IES 10901) (WIS 10901).

Hi,
I am trying to create a Webi report based on an OLAP Universe. I am using BI 4.1 SP01
I did the following:
1. I have setup a databse connection for SAP SSM via the create connection wizard in the Universe Design Tool. My connection is created sucessfully.
2. Next I created a Universe saved it and exported it.
3. In webi I am trying to create a report, I selected a couple of measures in the "results objects" section. In the qurey filters section I selected month.
When I run this query, I am getting an error message: Database error: Failed to execute MDX query. Reason: returned server error (). (IES 10901) (WIS 10901).
I tried to search for similar issues reported on SCN forums and other places and it looks like a generic error and this was not answered in some of the discussions
Any help is very much appricated.
Thanks
Imtiyaz

Hi,
I have verified in BEx query properties, it's "allow External Access to this Query" is checked.
I have filter in BEx query, so not need to had it to query selection again in webi report.
Could any other solution??
Regards,

Partition Error - target disk too small

On my 3.1Ghz iMac running OSX 10.8.5 I'm trying to Partition my Hard drive so I can setup a second boot.
Currently my Macintosh HD has 404.07GB USED and 707.75 AVAILABLE.
I'm trying to add a partition that is about 350GB. But when I do so, it gives an error that the Target Disk Is Too Small.
Why is this? How can I get around this?
I have included screenshots from my Disk Utility:

You can't resize a Core Storage logical volume. You would have to start up in Recovery mode and destroy the logical volume group (also destroying all data in the process), partition, and then restore the data from a backup. Almost certainly this is not a good idea unless you need to dual boot, but that wasn't your question.

WAD: Size of graphic is too small to display data

Hi BI-Gurus
I get a message showing that the graphic size is not large enough to display data.
I already have a chart item linked to a query which has the same amount of columns as result. This chart/graphic seems to be okay, WAD displays it.
But the other chart/graphic doesn't work although the linked query (it is another one than the first mentioned) have the same amount of columns as result.
Do you have any ideas how to fix this problem?
Thanks in advance
Hopp Schwiiz

Hi,
If i am understanding your problem correctly, your size of second chart is too small to display. This you can overcome this problem by changing your webiteam basic settings like width & length. Sometimes, based upon data or the type of chart settings, the second chart area is not enough when compared to first chart.
If your chart is designed through report designer, there you can just change the row & column size of the chart it contained. This you can do by selecting that row/columns and in the left side down bar, you can see the properties to change the width. Remeber, this is only in Report designer.
Regards,
Srinivas.

Hard drive too small to hold all my music

I have an iBook that I got from my aunt for graduation that I am using to load music into my new iPod. Unfortunately there is only a 9 gig hard drive on the computer, so i cannot keep all my music files on it. Is there any way to avoid having all the music i delete from my hard drive deleted from my ipod by itunes whenever I update my music?

Set your iPod to manually update songs and playlists (Preferences>iPod).
You can now add music to the iPod and delete it from your library.
Although there exist utilities to copy the files from iPod to computer again, I wouldn't recommend to use it as a backup medium.
It may get stuck, requiring a restore (loosing all contents), it could get lost, broken, stolen etc.
If your music is precious to you back it up on an external HD, CD or DVD.
Hope this helps.
M

Database error: [Teradata][ODBC Teradata Driver] Unable to logon with Authentication Mechanism selected.. (IES 10901) (WIS 10901)

Hi ,
I am trying to run a report in Rich Client , it gives me the error as attached . please advice . It works fine in Webi BI LAUNCH PAD

there are three options as shown in the screen shot
Also When i log in the Teradata assistant client 14 with the ODBC i have, it connects properly ,
Also could you please tell me if i have to configure the User DSN or System DSN

ORACLE CLOB data type and WIS 10901

Hello! I have several objects in universe that has connection to ORACLE DB. One of them has type CLOB in db and Long Text in universe, other has type number and has definition COUNT(db_column).
When I'm using this objects separate in webi query - everything fine, but when I put them together I've got error message:
A database error occured. The database error text is: ORA-00932: inconsistent datatypes: expected - , got CLOB
. (WIS 10901)
What's going wrong?

I''ve got a solution! I've had sql in my query
SELECT
ltrim(OPERATIVE_REPORT."orderText",11),
OPERATIVE_REPORT."resolID",
COUNT(OPERATIVE_REPORT."(usrID)order_executionUser")
FROM
OPERATIVE_REPORT
GROUP BY
ltrim(OPERATIVE_REPORT."orderText",11),
OPERATIVE_REPORT."resolID"
where orderText has clob datatype. And the reason is GROUP BY. GROUP BY deny CLOB usage.

Photoshop resolution on Macbook Pro 15" Retina display too small

I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%)
If I move the application window to another screen it adjusts it correctly – leaving all the pallettes, menus and tools correctly sized as they are on the retina display
Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see?
There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light.

quaetapo wrote:
Well that certainly helps in terms of making the image larger – only problem is with the low resolution there's a loss of clarity and pixelisation of the image; so not the same level of quality...
In System Preferences/Display, what resolution do you have your screen set to? Try changing that also to see if the two settings can work together. Also, since the vast majority of users (Mac or PC) don't have Retina Displays, isn't what you're seeing with Low Resolution checked in Photoshop closer to what most people will see? Remember that Apple's software, such as Safari, have been upgraded to take full advantage of the rMBP display; most other browsers, especially in Windows, haven't.
And if you want to tinker with the rMBP's resolution even further, check out "Eye-Friendly" in the App Store.

Error (WIS 10901) while creating a webi report against SAP data source

Hi,
While creating a webi report against a universe created using Infocube/Bex query (basically SAP data source) get a error message -
A database error occured. The database error text is: A runtime exception has occured. (License key check failed. Check that you are licensed to access SAP data sources). (WIS 10901).
Any clues whether this is a license issue or something else?
Thanks,
-Purav.

>
George Pertea wrote:
> Does your connection in the Universe test ok on the server if you are on Win? Did you install the Java Connector properly?
I am having the same problem. I checked and double checked everything, including deleting and recreating the Universe and the Connection. No improvement. On a whim, I deleted the hierarchy from the query on which the Universe was based, and recreated the Universe on the query without the hierarchy. The problem went away.
Now, the question is, why do I get the WIS 10901 error when a hierarchy is present in the query/Universe?

WIS: 10901 Data source name not found and no default driver specified(ODBC)

Hi, gurus.
We've created a universe based on Excel spredsheet or MS Access which is using ODBC connection. Then, I try to create query (which is using these universe) in QAAWS or in InfoView, and when I add a filter object to the query, the error occurs:
"GetDatasourceObject LOV exception (error WIS: 10901)".
If I don't choose any filter options and want to create query, I'm getting the error: ' [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (error WIS: 10901)'.
We tried to do this in different operations systems - Windows 7 (32 bit) and XP (32 bit).
Anymore, we can use this universes at web intelligence rich client with or without filters.
Need to solve this problem. Please help us.

Dear all,
I got the same problem, I have installed BOE 4.0 at Win XP 64 bits, and also installed Sybase IQ 15.2 (32bit) ODBC, and has create the odbc entry "shkdemo" at the System Tab. However, I still got the same error when using the the "Interactive Analysis" thru "BI Launch pad".
For BOE 4.0, I found that I could only use the BOE Client tools (Universal Design Tool) to create the connection, this client tool I installed it at another 32 bit XP laptop, and I also installed the Sybase IQ 15.2 (32bit) ODBC with the same odbc entry "shkdemo", and using the "Interactive Analysis Desktop, I could be able to create report with data from IQ 15.2.
Kindly advise, why I still got the error of "10901 Data source name not found and no default driver specified(ODBC)" when I use the "Interactive Analysis" thru "BI Launch pad".
Cheers,
Hilda

Target is too Small to Hold Data (IES 10901)(WIS 10901) Webi Vs.Rich Client.

Similar Messages

Maybe you are looking for