Target node/queue unavailable

Hi Friends,
Just Now I have completed my 2 node 11.5.10.2 installation on Linux......
(a) Database node on one machine ( Purely Database)
(b) Application Tier on one Machine ( Forms,web, admin and Concurrent Manager)
I have completed installation succesfully.... I did not see any errors while instalaltion....
But I am getting one problem regarding Concurrent Managers....
All Managers are showing as Target node/queue unavailable except Internal Manager .....
It is showing the Target node/queue unavailable for the following Managers
(a) Conflict Resolution Manager
(b) Scheduler/Prereleaser Manager
(c) Session History Cleanup
(d) UWQ Worklist Items Release for Crashed session
(e) Inventory Manager
(f) Standard Manager
what to do in this case...please it is urgent...

Thanks Hussein,
I understood what you are saying....
In Application Node....
in My Application context file....TNS_ADMIN is pointing to the following location
/u01/testcomn/conf/TEST_appserver/8.0.6/network/admin/TEST_appserver
Why it happened, i dont know...can we change this in context file ????
eventhough, i am not getting any problems...concurrent requests are running successfully in 2 node installation....
one more thing.....
===================================================
in my Application Node...in $COMMON_TOP
i have the conf directory..which i did not see this directory in single node installation...
this is the directory strucutre created in COMMON_TOP
/u01/testcomn/conf
/u01/testcomn/conf/TEST_appserver/
/u01/testcomn/conf/TEST_appserver/8.0.6
/u01/testconn/conf/TEST_appserver/iAS
/u01/testcomn/conf/TEST_appserver/8.0.6 directory contains the following
TEST_appserver.env TEST.env discwb4 network reports60 tools vbroker
/u01/testcomn/conf/TEST_appserver/iAS directory contains the following
Apache CAATEST_dana2.env CAATEST.env network oem_webstage soap
====================================
I have never seen the above strucuture in single node installation...but in 2 node installation..it is showing
conf directory in COMMON_TOP
==========================================
I have[b] Database on one Node and Application tier on another Node.....while multinode installation, by default Share Application Tier file system is checked in 11.5.10.2 in screens.....i think it is not required for my setup, because I have database on one node and Applications on another node. But I run the installation with checking the Sharing Application Tier File System..(Database on one node and Applications on another node)
if we want to have one of the Application Servers(Admin,CP,Forms,Web) on both the nodes, then sharing the Applications Tier is required.
With having share application tier file system in my 2 node installation will it effect my Environment...
please suggest...I am thinking that, conf directory is created because of that only......
This is my Test Server...not my production..

Similar Messages

Target node/queue unavailable for 12i Concurrent Managers on Redhat Linux

Hi,
I was able to sucessfully install Release 12 Vision on Redhat Linux.. Every thing is working fine but concurrent managers are not active except the Internal Manager. Rest of the Managers has no value in the node name field and the status is "Target node/queue unavailable".. I also ran adcmcmtl.sh to manually stop and start the managers but still facing the same issue..
Please tell me what i'm missing..
Thanks in Advance,
Prasad

Duplicate post ..
Re: Not able to start the concurrent Managers in Release 12 on Redhat Linux 4
I suggest we follow up on one post so we can get more input from others.

Target node/queue unavailable after clone

Target node/queue unavailable error after clone.
All nodes are updated (accordingly to the structure) in fnd_nodes
Please help
EBS 11.5.10.2
DB 9.2.0.8.0

Hi;
Acc to this note the cause is "FND_NODES was not populated correctly. " after a node was added. This issue is just coming after a clone and the table FND_NODES is updated properly.1. What is exact error you are hitting?
2. Did you run autoconfig on db tier than apps tier(services should be down)
If yes any error?
Regard
Helios

Widows XP - Concurrent Manager - Target node/queue unavailable!

Dear All,
Need help to run concurrent Manager, all services are up, started, but all request are inactive, no manager, I tried my best to solve this problem thru metalink, updating FND......, its activating and suddenly status changing to target node/queue unavailable.
Please give me some idea how to sort this problem, when intalling 11i there is some error came memory error and i cancelled, then it proceeded and completed installation.
Regards,
Williams.

Hi All,
I am also facing same problem and did you got the any soluation.
I am getting below problem, while trying to install E-Business suite on Windows server XP,
RW-50011 :ERROR:- Operating system patch/version test has returned an error:1
Moreover I have prox 92 GB disk space free, but it's giving errors, there is no enough free space on disk...
Warm regards
raags INDIA
[email protected]

Standard Manager Target node/queue unavailable

Hello everybody!!
I am having problems with SM ( Standard manager ), I see that all my Oracle Applications is working fine, but when I deploy one request ( ex. report ) have error, the request is phase inactive and Status not manager.
The button diagnostics says
""This request will not be processed because there are currently no managers running that can process it.
This is an error condition. There are one or more managers defined that can process this request that should be running at this time, but do not appear to be running""
In the OAM try to start a Standard manager but was error Targer node / queue unavailable
SO Red hat Enterprise 4
i need help

You are posting in the wrong forum. This is for Oracle Business Intelligence Applications, not Oracle Applications 11i / EBusiness Suite.

Target/Node unavailable for Service Manager/Authtenticaion

Hi,
when ever we cloned from Production to TEST...Service Manager/Authentication Manager has Target/Node unavailable....showing this...
what might be the problem..is it normal..can we ignore it...

OK, I guess I got what you mean by "Service Manager/Authentication Manager". Please refer to:
Note: 342939.1 - Could Not Contact Service Manager FNDSM_AUTHENTICATION_PROD
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=342939.1

Generating target nodes dynamically in message mapping

Hi XI GURUS
I am trying to generate target node using using more then source node. Is it possible to do this.
I need this as in source I have 2 different nodes (0 to unbounded) and in target I want to create corresponding number of target nodes. For e.g if I have 2 + 1 nodes in source then I want to create 3 nodes in target
Source as below
<FIRSTNAME>
 <Raj>
 <Kum>
</FIRSTNAME>
<FIRSTNAME>
 <Naveen>
 <Kumar>
</FIRSTNAME>
<CITY>
<bANGALORE>
</CITY>
Desired output in target as below
<ADDRESS>
<qwerty1>
<ADDRESS>
<ADDRESS>
<qwerty2>
<ADDRESS>
<ADDRESS>
<qwerty2>
<ADDRESS>
Can i follow an alternative approach (using java function) of counting the total number of occurences of source nodes and generating as many number of the target node
Thanx

If you have a condition check for each of the source node to be mapped to the target node,
use "create if" standard function and pass the boolean result of your Condition check as an input to this standard function. For each "true" a value would be added to the output queue. If you have a simple condition check on some source field value for each correspoding node, use "if without else" or depending on the complexity of the condition you may use a udf to get the boolean outcome.
And for mapping from more than on type of source node, you may duplicate subtree for target node.
Regards,
Suddha

Child element of target node in message mapping getting suppressed

Hello All,
I am having mapping where i am trying to generate the target node based on some condition of the source structure ,this is working fine ,I am able to generate the target node once the condition gets satisfied ,but the problem is one of the child elements of the same node is not getting populated,its getting suppressed,i have some condition for the same
I checked the queues its showing value as
SUPPRESS
Value
Value ( in grey )
But still element is not getting generated..
I have added a condition used at the node function and apart from other condition of element..
If some body have the solution for the same,please help me out
Thanks in advance
Rajesh

Hi Rajesh,
The Error is mostly cause of that the node and your child are in same context.
You got to remember that the parent node creates the context, and then the child element puts the value in it.
Try putting your child element to a higher context then mapwithdefault for your supress and then removecontext.
This Issue, you got to work it out with the node functions,
I had the same kind of issue in my mapping, it was rectified with the help of node functions as mapwithdefault, removecontext.
Further unless one sees the mapping of your issue it is a bit difficult to imagine it and answer it.
For more clarifications please give the full hierarchy, and the condition. As of now try with the node functions.
Thanks
Ashmi

Mapping debug - target node not being created

Hi Gurus,
I have an issue in my mapping. Let's say I have a source structure:
><body>
> <maintag>
> <value>1</value>
> </maintag>
> <maintag>
> <value>2</value>
> </maintag>
><body>
I need to map maintag->target node but only in case if value eq 2. I used a Ifw/oElse function which creates target queue
SUPPRESS(grey)
SUPPRESS(cyan)
SUPPRESS(grey)
[] (dark grey)
which is fine, because only 2nd context matches the condition. But no target node is being created!
Why? How to resolve this?
Thnak you!
Olian

Hi Olian,
Changing the context to one level up is working for me.
Please refer to the following links:
http://farm4.static.flickr.com/3055/2828227942_e71da4a823_o.jpg
http://farm4.static.flickr.com/3134/2828228398_92f5ba41e0_o.jpg
Here the context of value was set to body in the sample DT i created.
regards,
venkat.

Target operation is unavailable: cleanup of previous target with the same n

Greetings,
In OEM 12c I have several clusters. For one, from the console I deleted the cluster and then manually added the cluster target back. The operation was successful but for one of the high availability (has) services a metric collection error is displayed. For that particular target the EMDIAG output reports -
Target operation is unavailable: cleanup of previous target with the same name is still pending
I have not been able to find an explanation of that nor how to resolve it. Can anyone assist me?
Thank you.
Bill Wagman

Hi,
You can remove the target from monitoring and add it again, that can solve the problem.
Regards,
Venkat

ABAP MAPPING Querry - How to create Different Target NODE NAME as of Source

Hi,
In abap Mapping
DATA READ FROM SOURCE XML NODE into incode ******
data: incode type ref to if_ixml_node_collection.
incode = idocument->get_elements_by_tag_name( 'BUSINESS_DAY' ).
CREATE OUTPUT XML NODE WITH SAME NAME AS 'BUSINESS_DAY' **
data: outcode type ref to if_ixml_node.
outcode = incode->get_item( index = 0 ).
data irc type i.
irc = msgtype->append_child( outcode ).
*BUT TO CREATE OUTPUT XML NODE WITH DIFFERENT NAME AS 'BUSS_DAY'*
data: ws_val type string VALUE 'xyz'.
data: elementsender type ref to if_ixml_element.
elementsender = odocument->create_simple_element(
name = 'BUSS_DAY'
value = ws_val
parent = msgtype ).
Please guide me how I can assign incode value to ws_val.
So that I can generate OUTPUT XML NODE with different name as of SOURCE XML NODE
i.e. How to create Different Target NODE NAME as of
Source with same Data
<Note>: I am using "How to... Use ABAP Mapping in XI 3.0 ver.1.00" and to create different NODE name as of source
is not given in it.
Thanks & Regards.

Hi ABAPers,
Please Guide Me .....
This is ABAP Mapping problem in XI.
How can I read data from incode into ws_val.
data: ws_val type string
data: incode type ref to if_ixml_node_collection.
incode = idocument->get_elements_by_tag_name( 'BUSINESS_DAY' ).
Best Regards

How to remove target node if source field value is empty SAP PI Mapping

Hello,
how to remove target node if source field value is empty in graphical Mapping.
Like if
MIddle name in source filed is empty, I would like to eliminate target field from out put XML.
Thank you
John

Hi Jhon,
If you want to remove all empty tags and you dont to complicate your message mapping, you can use a XSL, after the message mapping, to remove all the empty tags:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:template match="node()|@*">
 <xsl:copy>
 <xsl:apply-templates select="node()|@*"/>
 </xsl:copy>
 </xsl:template>
 <xsl:template match="*[not(@*|*|comment()|processing-instruction())
 and normalize-space()='' ]"/>
</xsl:stylesheet>
Regards

Target node creation on condition

Hi I have a requirement where i have to create a target node based on a requiremnt.
the source is The target is
Line Tar
a1 C1
b1 C2
c1
Line
a1
b1
c2
Line Tar
a2 C3
b2
c3
I have achieved creating Tar based on a b values . now i have to map the C target so that it is created for every c value . but if a,b values are same then C has to be in the same Tar element.
How can i achieve this . Any help is greatly appriciated.
Note: i just need the mapping for C node. not the Tar node.
Thank you

Hi ,
in my input i have,
<Name>
<FirstName>demo</FirstName>
<LastName>test</LastName>
</Name
<Name>
<FirstName>Testdemo</FirstName>
<LastName>test</LastName>
</Name
<Name>
<FirstName>Test</FirstName>
<LastName>test</LastName>
</Name
<Name>
<FirstName>demo data</FirstName>
<LastName>test</LastName>
</Name
So i have to create Name node in target whenever FirstName is starts with demo with other values in the corrspoinding Name node.
So my target will be
<Name>
<FirstName>demo</FirstName>
<LastName>test</LastName>
</Name>
<Name>
<FirstName>demo data</FirstName>
<LastName>test</LastName>
</Name
Please tell me how to get this
Thanks
Archanaa

PI Message Mapping One Source to create two of the same Target Nodes.

Hi,
I have a source node that contacts the following.
"1234-5678".
When there is a "-" in the source node then I need to create two target nodes.
When there is no "-" in the source node then only create one node.
Since the source structure is a flat structure by on the target side as you can see I am trying to achieve a diep structure.
Please can you assist in how to do this with PI message mapping.
Regards
Willie Hugo

Hi,
"1234-5678" only occurs once in the source. There is no source xml node that will occur more that once. The whole structure only occurs once. But on the target side I need one of the node to occur more than once if a hyphen is found in the source field.
Source Message - Always only one data node.
==============
<root>
<OnceOnlyNode>1234-5678</OnceOnlyNode> [1..1]
</root>
Target Message - Only two text node when "-" in source, else only one text node.
=============
<msg>
<text>1234</text>
<text>6789</text>
</msg>
How can this be done using standard PI message mapping functions. Can it be done?
Regards
Willie Hugo

Biztalk Map create duplicate target node

Using biztalk mapper, I need a target node to be duplicated.. I have created a simplified version of my issue. Please see below map
link for source and destination schema.
I need the target Option node to be duplicated for each OptionNotes. The value of OptionNotes is to be split by a pipe ("|"),
then map to target Code and Description.
The input is as below:
<ns0:Source xmlns:ns0="http://Test.SOAP.Source1">
<Option>
<OptionID>ID0_NoNotes</OptionID>
<OptionName>OptionName_0</OptionName>
</Option>
<Option>
<OptionID>ID1_NoNotes</OptionID>
<OptionName>OptionName_1</OptionName>
<OptionNotes>NOTE1|BLAH1</OptionNotes>
<OptionNotes>NOTE2|BLAH2</OptionNotes>
</Option>
</ns0:Source>
The output should be as below:
<Destination>
<Options>
<Option>
<Code>ID0_NoNotes</Code>
<Description>OptionName_0</Description>
</Option>
<Option>
<Code>ID1_NoNotes</Code>
<Description>OptionName_1</Description>
</Option>
<Option>
<Code>NOTE1</Code>
<Description>BLAH1</Description>
</Option>
<Option>
<Code>NOTE2</Code>
<Description>BLAH2</Description>
</Option>
</Options>
</Destination>
Tried to use Looping and combination with Value Mapping, but to no avail. Do I have to resort to inline xslt?
Thanks.

Thanks for all your answers.
@Pi_xel_xar Your suggestion requires a change in the message schema.
@Nadeem We have already tried the solution on the blog, but it's not quite the scenario we face. The issue is the OptionNote is in the same layer as OptionID and OptionName.
We have used another tool, which has done this easily. We then get the XSLT and import it as part of Inline XSLT scripting functoid.
The XSLT produced was as below:
<xsl:for-each select="ns0:Source/Option">
<Option>
<xsl:for-each select="OptionID">
<Code>
<xsl:value-of select="string(.)"/>
</Code>
</xsl:for-each>
<xsl:for-each select="OptionName">
<Description>
<xsl:value-of select="string(.)"/>
</Description>
</xsl:for-each>
</Option>
</xsl:for-each>
<xsl:for-each select="ns0:Source/Option/OptionNotes">
<xsl:variable name="var1_resultof_cast" select="string(.)"/>
<Option>
<Code>
<xsl:value-of select="substring-before($var1_resultof_cast, '|')"/>
</Code>
<Description>
<xsl:value-of select="substring-after($var1_resultof_cast, '|')"/>
</Description>
</Option>
</xsl:for-each>
Thanks everyone.

Target node/queue unavailable

Similar Messages

Maybe you are looking for