Target quantity in Sales Order Overview.

12.11.07
Hi friends,
How do i get the Target quantity (VBAP-ZMENG) field in the order overview screen. My need is to enter the target quantity instead of the order quantity. Please advise.
Regards,
Udaynath.

Hi ,
Please goto Tcode SHD0  in that enter the Transaction code Va01 and Name of Transaction Variant BUS2032_4480  . Please check the fied u require i.e vbap-zmeng and make that field visible and reuired by checking the check box in the same row.
If in ur case Transaction variant is different than BUS2032_4480 . Please press F4 on the field and try to get the correct one which is there .
This will work .

Similar Messages

  • Restricting Target quantity in sale order

    Dear Guru's
    In the Sale order I want to have a default order quantity as 1 irrespective of whatever material I enter.
    Please let me know how can I do this.

    Go to T.Code: VOV7 and in the item category which you are using
    In the general control you have field called
    Order Quantity = 1
    This indicator allows sales order line item unit (order Qty) as one (1), this is the usual case in case of contracts.
    It is relevant for WKN (Value Contract Item)
    Regards
    AK

  • Minimum quantity in sales order

    Hello friends,
    Can anyone tell me how to maintain minimum quantity in sales order, (Not Minimum order quantity of material master) as only maximum (target) quantity is maintainable in sales order at Item level? So after this development in sales order, one can enter two quantities (minimum and maximum) so that sale can be done between this quantity range.
    I know this is not possible without exits or developments, but please tell if someone has came across the same scenario which exits used by you.
    <b>Required Minimum Order quantity Field in Sales Order at item level like Cumulative Order Quantity in Sales Units (VBAP-KWMENG) at proper position in Transaction-> VA01-VA02-VA03.
    Program name: SAPMV45A Screen number: 4900 or wherever it is adjusted at item level i.e. Additional Data B Tab.</b>
    Thanks in advance
    Warm regards
    Amit

    Hi Prabhu Peram,
    I want to maintain a input field can you throw some light on the same.
    Regards
    Amit

  • Contract Quantity to Sales order qty

    Dear Sdities,
    1. I have created Contract Using VA41 for 150 KG & saved Contract.
    2.I have created Sales Order(va01) by referring to Contract , but i created  Sales order for 151KG.
    Then it gave me below Warning message & it allowed me to do delivery for 151 KG.
    {Target qty of reference: 150 KG (total referenced: 151 KG)
    Message no. V1501}
    But My requirement is...
    1. For the same it shouldn't allow me to create for 151 KGs & it should give me Error message than Warning Message.
    Plz reply with Solution.
    Regards..

    Hello,
    Its very normal that you can enter order quantity more than the reference contract quantity flowing from the contract.
    Additionally its not recommended that you change the standard SAP standard messages from warning to error etc.
    Better you should go for an exit. Use following details:
    Goto SE38 & enter include MV45AFZZ
    Then goto user exit "USEREXIT_SAVE_DOCUMENT". In this you should tell your ABAPer to write code such that it compare the previuosly refered quantity & hence does not allow to enter quantity more that that in contract. You will get error message while saving the document & system will thus prevent extra entry of quantity in sales order.
    Hope this solves your requirement
    Regards,
    Dhananjay

  • Net Price/Net Value on Sales Order Overview Incorrect

    Hi Experts!
    We are on SAP 4.7
    I have a sales order that has already been delivered, billed, etc.  However, when I look in the Sales Order Overview screen, for 1 item, the Net Price is different than the Item Pricing Condition screen.  I looked in document changes and did see when the Net Price was changed, but cannot tell why it was changed.  Can you anyone explain why this happened?  This is causing a minimum order surcharge in the order.  Awaiting a quick response.  Thank you in advance!
    WC

    Thank you for the response!
    I have tried to replicate the scenario, that was causing the net price/net value displaying incorrectly, and thus causing a minimum order surcharge fee; which was really the issue. 
    When I re-created the scenario, I found that a change in quantity in the sales order of an item or items, after the delivery has already been created (before posting GI); it caused the net price/net value to change, thus causing the minimum order surcharge. 
    The person changed the quantity in sales order, and it indirectly changed the net price, causing the minimum order surcharge.  I still do not know why this happened?
    Do you know of any reasons why this may have occured?
    Thank you in advance!
    WC

  • How to Restrict Confirmed Quantity in Sales Order (Based on Batch Expiry)

    Dear SD Experts,
    Currently our sales order confirms any amount of quantity if stock is available. And only during delivery it checks for the expiration of the batch and reduces the delivery quantity to batches available in stock within expiry.
    But since we are doing a bulk creation of deliveries at the end of the day, the check for expired batches is happening too late and no visibility for the data entry operators of stock that cannot be delivered during creation of the sales orders.
    So I am looking for solution to restrict the confirmed quantity in sales order to actually confirm only stock what can be delivered. i.e. based on expiry of the batch.
    Thanks!

    hi
    in Logistic general - batch mangement - batch determination allocation and check activation - maintain allocate SD search Procedure/ activate check
    check this for your sales area and sales document type and then in the search procedure maitain the strategy to check the Expiration date.
    regards,
    Sudhir

  • Free goods determined in Delivery over Order Quantity in Sales Order Item

    Hi Gurus,
    I've a problem about using free goods determination.
    First I created free goods master record with following information
    ZG1010012060075 From 100 PC -> Free good ZG1040012060075 2 PC
    Free goods Category = '2' (Exclusive)
    Free goods delivery control = 'E' (Delivery proportional to quantity in main item)
    Then I've created Sales Order with
    Item 10 ZG1010012060075 4,000 PC.
    Item 11 ZG1040012060075(Free good) has been automatically determined for 80 PC
    Then I've splitted Item 10 into 4 deliveries. The result of free goods determine in each delivery are as follow:
    Delivery#1)
    Item10 ZG1010012060075 = 1,176 PC
    Item20 ZG1040012060075 = 24 PC
    Delivery#2)
    Item10 ZG1010012060075 = 1,176 PC
    Item20 ZG1040012060075 = 24 PC
    Delivery#3)
    Item10 ZG1010012060075 = 1,176 PC
    Item20 ZG1040012060075 = 24 PC
    Delivery#4)
    Item10 ZG1010012060075 = 472 PC
    item20 ZG1040012060075 = 9 PC
    *Remark : Total quantity of 'ZG1040012060075'(free goods) = 92424+24 = 81 PC
    (Greater than 80 PC)*
    I think the system determined free goods in Delivery#4 correctly due to rounding up. But It might not be over the order quantity in Sales Order Item 11. Even though I've set the item category in delivery with Check overdelivery = 'B' (Situation rejected with an error message), the free goods are determined over order qty. BUT if I change delivery qty in delivery#4 Item20 from 9 PC -> 8 PC -> 9 PC, the error message occurred.
    My point is to fix the system not determine free goods in delivery items over order quantity in sales order item.
    Has anyone met this situation before? Do you have any idea about this issue?
    Best Regards,
    Prachya Lalitnorasate

    Dear Sai,
    Thank you for your advice, but it didn't solve my problem.
    I would like the system to determine free goods with proportional to main item AND In the last delivery main item delivered completely free goods must be determined equal to remaining open delivery item.
    Do you have any idea about configuration/customization?

  • Open quantity in Sales Order did not update after cancelling Reserve Invoice

    Client created Credit Memo with reference to Reserve Invoice but this did not update the open quantity in Sales Order. Client is using SAP B1 8.82 PL9. I tested this in SAP 9.0 and still same behavior. Is there a work around other than creating another SO?
    I checked Document Settings and "Reopening Doc by creating credit memo based on Doc" is enabled.
    Thanks in advance.

    Thanks for the reply. How will the client be able to make new reserve invoices from the SO? They are trying to make partial reserve invoices from the sales order. I already suggested to just change the quantity in the reserve invoice before adding. But I have doubt because the SO might close prematurely before they complete the quantity in the SO because open quantity is much less then the quantity in SO.
    SO Quantity: 100
    Open Quantity: 40
    Reserve Invoice 1: 60
    Reserve Invoice 2: 40
    SO closes before they can make Reserve Invoice 2

  • In which table,i could find order quantity for sales order..??

    In which table, i could find order quantity for sales order..??
    and also in which table i could find delivery for sales order..
    need help..??
    Moderator message: please search.
    Edited by: Thomas Zloch on Feb 23, 2012

    Check the table AUFM.
    Give the order number in AUFNR.
    For movement type 261 (GI) & 101 (GR), you can get the material document number (MBLNR), Material (MATNR), Qty (MENGE) & UoM (MEINS).

  • How to get the back order quantity for sales Order

    Hi Friends,
    I want to get the back order quantity for sales order . in MD04 t-code,
    there is a field(MDEZ-MNG01) for Received Qty/ Required qty.  But MDEZ is a structure.
    I tried from MDTB table, but the table is not updated with the values in MD04.
    Please guide me from which table I can get the back order Qty for sales Order
    (ref: t-code  MD04, MRP element = CusOrd).
    Thanks,
    Sagar

    >
    VIdya Sagar wrote:
    > Hi,
    >
    > Isn't  there any difference b/n Open Sales Order and Back order??
    Yes Quite Difference.
    Read:
    http://www.sap-img.com/sap-sd/explain-the-meaning-of-an-open-sales-order.htm
    http://help.sap.com/saphelp_sbo2005asp1/helpdata/en/b6/bdb9b2f02842348c9edbe78af863c4/content.htm

  • Run Time Error while Entering Quantity in Sales Order

    Dear All,
    Iam getting Run time Error while iam entering material quantity in sales order.Please  find the screenshot of the same.
    kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server.
    Rgds
    Thomson
    ST22 Screenshot

    Dear All
    Its Resolved Thanks For your Valuable time Support
    INCLUDE LV03VFB4 inside below code trigger error.
    PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                        WA_AVBBD-APOMOBILE
                                        DA_SUBRC
                                        DA_UPDKZ
                                        DA_VVBBD_TABIX
                                        0.
    This Was the Error some how 0 was there we are removed the 0 now it is working fine
    Rgds
    Thomson

  • How to control not to confirm quantity in sales order schedule line

    Hi,
    We have a problem with confirmed quantity in sales order schedule line.
    When I reject a position in a sales order, confirmed quantity still remains with quantity ( diferent to 0).
    I need in some cases that system not to confirm quantity in schedule line at item level.
    I've tried to do this with a new routine in OVB8 transaction, but it didn't work.
    Could you help me? How can I avoid the system to confirm quantity in a sales order item?
    Thanks in advance....

    Hi Lakshmipathi,
    I'm sorry. The rejection was a bad example.
    I need, in some cases, that the system doesn't confirm quantity in sales orden item. We have a custom field in sales order item and we need to confirm with 0 quantity , when that field has a specific value.
    Due to that field is a custom field, I need an exit, or rutine, or .. i don't know...to inform a standard field too ( delivery block, rejection...) something to get confirmed quantity to 0.
    I've tried with rutine in OVB8. But It didn`t work
    I've tried with delivery block, but with this all items in sales order, confirms with 0. I need at item level.
    Thanks

  • Standard report show the confirmed quantity in sales order

    Hello
    i'd like to know t-code for report show the confirmed quantity and the remaining quantity of sales order
    For example : i create sales order with quantity (1000) and the quantity of material in storage location 600 , so i want report display the confirmed quantity ( 600) and the remaining quantity (400)
    Thanks

    Search the forum before posting.  Check in VA05
    G. Lakshmipathi

  • It still shows confirmed quantity at sales order in case of no stock

    Hi,
    I have the availability check configuration, but my requirement for 0 confirmed quantities at sales order in case of no stock is not working. That is- It still shows confirmed quantity at sales order in case of no stock. Please suggest. 
    All the setting for availability check is done. I have set the accumulation as 3 in checking group. But still not working.
    Thanks
    Mauryan

    Dear Mauryan,
    ATP check will work if you have already turned on ATP check in the following 3 transactions:
    OVZ2
    OVZG
    OVZ8
    You need to turn on ATP at your checking group, requirement class, and schedule line category. If one of them is off, then ATP check will not work. See note 547512, Q1.
    Claire

  • Problem in confirming quantity in sales order

    Hi,
    Quantities are not confiming in sales order after releasing the QM LOT by transaction QA16. Here the stock is posted to unrestricted stock but the table QALS is not updated accordingly which causes the problem in confirming the quantity in sales order.
       Is there any scope of reversal of the QM lot so that further the lot can be released  by QA32 or QA11.
    Further when a lot is releaded the status of the lot is updated as the usage decision has been made. Where this status is stored?
    Regards
    Indranil

    Hi,
    Have yoou give the document category for quotation as B. Please try ginvg the same and run.
    Thanks
    Shiva

Maybe you are looking for