Target system(Destination) for RFC call ?
Need some help in calling an RFC for xi interface.
For triggering the data in to xi , RFC needs to be called. This RFC can be called using an ABAP Program / report . BUT inorder to call that RFC a Destination / Target system needs to be defined . Even though RFC destinations can be managed by transaction SM59 what will be the target system for calling this RFC in a generic sense?
Like what destination i should be expecting this code : ?
REPORT Z_TEST.
CALL FUNCTION 'ZFunctest' destination ????
Please suggest
Krishna
Yes i now understand the scenario : well is this statment correct ?
When we say like this :
CALL Function 'ZTEST' Destination SIDCLNT015
does this mean ZTEST should be there in destination system ? which means the RFC i am writing should be there on xi systems whose system id is SID ?
As i heard some where that ZTEST should be there on targetsystem i call for ?
Please suggest
Krishna
Similar Messages
-
System error during RFC call BAPI_FIXACCOUNT_GETLIST
Hi Gurus,
Below are the error and steps when i perform Payroll Posting to Accounting. To enable communication between distributed systems, the appropriate method have been specified in ALE Customizing for the objects of the following tables. (Basis -> Application Link Enabling (ALE) -> Modelling and Implementing Business Processes -> Maintain Distribution Model and Distribute Views.)
However, error still exists as shown below:-
1. Run TCode PC00_M99_CIPE
2. Encountered Error as shown below:
Communication error with system QAS, function FI_ACCT_DET_HR
Message no. 3G404
Diagnosis
The function module "FI_ACCT_DET_HR" has been called remotely in system "QAS". As a result, an error occurred when creating the connection or during communication.
Procedure
Check that the ALE distribution model is correctly maintained.
Account determination could not be performed
Message no. 3G361
Diagnosis
The account could not be determined for one of the following reasons:
No destination could be found in the ALE distribution model for the AcctngEmplyeeExpnses.Check method.
A system or communication error occurred when executing the function FI_ACCT_DET_HR in the target system.
System error during RFC call BAPI_FIXACCOUNT_GETLIST: / CPIC-CALL: 'ThSAPCMINIT' Unknown serv ice
Message no. KI012
3. Check in SM21: NiConnect Unsuccessful, Return Code: -0003
Communication error, CPIC return code 020, SAP return code 665
Please advice. Thanks in advance.
Best Regards,
FungHi,
Probably because of timeout, it is unable to execute the request ..so it is aborted.
btw, is it a synchronous call ? what is the message size ? the given data to RFC is correct and valid structure ? check the mapping .for this use the data from SXMB_MONI and test it
Check this blog for timeout errors-
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
moorthy -
System error occurred (RFC call),key value exists in duplicate
hi bw expert ,
i happen the error report.
"system error occurred (RFC call).
key value exists in duplicate (Not allowed by the ODS object type).
Activation of data records from ODS object Z08TRFKP terminated.
No confirmation for request odsr_80p13w4lqhnib3g9tiflvth56 when activating ODS object Z08TRFKP.
Request REQU_EVZB7CK82H7YMS13X3G42GKQY , data package 000001 contains errors with status 5 .
Request REQU_EVZB7CK82H7YMS13X3G42GKQY , data package 000001 not correct.
Inserted records 1- ; Changed records 1- ; Deleted records 1-
pls, help me .
thanks.hi experts,
the first, i initial update the data from r3 to bw ods, it is successful. the second, the system automatic touch off delta update from r3 to bw ods. it is false. now i have deleted the false delta update and repeat extractive. but it is also error.
please help me again.
thanks. -
Login information for RFC call
Hi there,
I would like to know if there is a way to authenticate a user via bsp and get that login information to make the RFC call to different systems.
i tried the to call an FM via RFC directly from abap and it forces me to login and it works but when i put that code to bsp. I just get a "page cannot be displayed" error.
I know i can enter an ID and password on sm59 for the connection but i need to let the user login
I am using this for a user creation tool.. instead of using su01 to create a user it will be done via bsp and would like to reflect the changes done when running the reports from SUIM
thanks in advance
RyanHi Ryan,
I will assume your RFC Destination already trusted system and using current user logon (see my previous reply).
However this still prerequisite for the next step.
Now, please correct me if my understanding is wrong.
In your reply, you have at least 2 System, right?
S1 & S2.
Where S1 has BSP Application (Ex:/ FormRegistration)
And S2 is where you control the user and Function Module.
Do you put, generic user for all BSP Service in System S1?
You can create another BSP Application in System S1 (Ex:/ CallingFM)
but this time don't put default user in BSP Service.
And from BSP Application FormRegistration, you create 1 button to call the BSP Application CallingFM.
I will give you sample code:
FormRegistration: address:http://systemS1.sap.com/FormRegistration/page1.htm
HTML Part:
===========
<HTML>
<input type="button" value="Register the user" onclick="submitUser();">
<script>
function submitUser(){
document.forms[0].action = 'http://systemS1.sap.com/CallingFM/page1.htm';
document.forms[0].target = '_new';
//it will open new window, just put it empty if you don't want to open new window.
document.forms[0].submit();
</script>
</HTML>
Now, when user click Button "Register the user" it will open the new window.
But because it doesn't allow you to using default user, it will prompt user id and password.
After that it will submit the data to CallingFM
Now in CallingFM we already have the sy-uname = user-B.
CallingFM: address-> http://systemS1.sap.com/CallingFM/page1.htm
OnInputProcessing Part:
=================
call function 'zcreate_user' destination 'S2'
Why you need CallingFM BSP application? because you need to re-assign sy-uname in S1 from default user with user-B ID, and use it to connect to System S2, S3, etc.
Please note: SM59 and User Id must be set before this.
Because when you call RFC from other destination, SAP will refer to Logon setting in SM59 for that destination.
Hope this will help you. -
RFC destination for RFC to File scenario
Hi,
I m creating a TCP/IP RFC destination in R/3 system for my RFC to File scenario.
Step 1:
For this a Registered server program is created in Jco RFc Destinations with,
Program Id : pgm1
Gateway host : PI's host
Gateway service : PI's service
application server host: ECC's host
system numer : ECC's number
client : ECC's client
logon user : ECC user
password : pwd
Step 2:
In SM59, TCP/IP connection the following parameters are given:
Program ID : pgm1
Gateway host : PI's host -
> is this correct
Gateway service : PI's service -
> is this correct
Step 3:
So i am calling the RFC in ABAP program (R/3 system) like:
CALL FUNCTION 'Z_HR_OUTBOUND_DATA2'
IN BACKGROUND TASK DESTINATION 'Z_HR_OUTBOUND_DATA2'
Step 4:
In PI side,
for RFC sender I am passing :
Application server : PI server
Application server service: PI host
program ID: pgm1 which was created in the previos step
For RFC Metadata Repository Parameter, i am passing all the values related to R/3
Please let me know whether the steps and values i given is correct.
B'cos even if i give ECC's information in Gateway host and Gateway service the scenario works fine and if i PI's info then also it works fine.
so i am confused as which is the correct method. pls clarifyOk I will try to explain....
Assumptions: R3_TO_XI is the name of RFC which I created in ECC of type T.
While creating the RFC in ECC we mention a unique name which is called Progaram ID. Now the same program id we mention in our sender RFC CC.
So now when an ABAP Progarm (where you will call this RFC with it's destination) is scheduled/triggered with the code as mentioned below then since the DESTINATION ('R3_TO_XI') mentioned here contain the same program id which we have mentioned in our sender CC, invokes the adapter in PI and soon after that all pipeline steps get executed in XI.
CALL FUNCTION 'ZBAPI_COMPANY_GETDETAIL'
IN BACKGROUND TASK
DESTINATION 'R3_TO_XI'
TABLES
comp_detail = company_detail.
COMMIT WORK.
Regards,
Sarvesh -
Question on service userid - for RFC call
Hi
In XI 3.0 SP18 , we are making a RFC call from XI mapping runtime - to XI's ABAP stack - RFC function module . In the RFC receiver communication channel , I tried using service user XIISUSER , XIAPPLUSER for this RFC call - I got short dumps on XI ABAP stack mentioning that these two service users do not have authorization to make RFC calls -
Does anybody out there know what service user on XI has RFC call authorization that can used to make RFC calls onto XI ABAP stack from its mapping runtime ?
Correct answers will be rewarded rightaway. Thanks for your time in advance.Hi,
u have to make entry in sld...
Hi,,
2 Introduction
Configuring IDoc adapter in Exchange Infrastructure 3.0 requires some configuration on the SAP
systems, for both XI and the backend system where the IDoc message is to be sent. These steps, although
simple, are many times missed or mis-configured, causing the delivery of messages to fail.
Since IDoc adapter uses the ABAP stack, instead of J2EE, the configuration requirements are mainly in
ABAP.
Setting up IDoc adapters requires the XI integration server to be able to communicate with the backend
SAP system, and also to make sure that the Logical System Name used when posting IDoc exists on the
backend SAP system.
3 The Step By Step Solution
The basic steps for the IDoc configuration are outline below:
1. Configure SM59 on XI to communicate to SAP backend system.
2. Configure port on XI for IDoc communication.
3. Create or verify the Logical System Name on the SAP backend system.
4. Create or verify business system in XIs System Landscape Directory.
5. Verify the Logical System Name of the business system.
6. Verify or add the Logical System Name for the sender business system.
7. Create/configure the Communication Channel for the IDoc receiver adapter
3.1 Configure SM59 on XI to communicate to SAP backend system.
1. Using transaction SM59, create an RFC destination with Connection Type = 3.
In this example, the RFC destination name is NDVCLNT510.
2. Enter the logon information:
3. Test the connection by clicking on Testing connection and Remote logon.
Both must be successful.
3.2 Configure port on XI for IDoc communication.
4. Go to transaction IDX1 on XI, and create a port. In this example, the Port name is SAPNDV.
The Port name must be in the form of SAPxxx, where xxx is the system ID of the backend SAP
system.
The Client must be the client number of the backend SAP system.
Select the RFC Destination which was created in the previous step.
3.3 Create or verify the Logical System Name on the SAP backend system.
5. Enter transaction SALE on the SAP backend system.
6. Create or verify the Logical System Name. In our example, NDVCLNT510 is verified.
3.4 Create or verify business system in XIs System Landscape Directory.
The business system name for the SAP backend system must contain a valid Logical System Name. This Logical System Name is the one verified or created in the previous step.
7. In the System Landscape Directory, select the SAP backend business system. If one does not exist, then create the business system. Verify the Logical System Name.
3.5 Verify the Logical System Name of the business system.
8. In the Integration Directory, doubleclick on the business system (in our example, it is NDVCLNT510).
Navigate the menu:
Service Adapter Specific Identifiers.
If information is empty or incorrect, then it will have to be synchronized with the content of the System Landscape Directory. Follow the steps below for synchronization.
9. (Optional) Synchronization of the business system in Integration Directory to the business system in System
Landscape Directory.
Double-click on the business system in the Integration Directory.
Switch to Edit mode.
Select menu: Service Adapter-Specific Identifiers
10. (Optional) Within the dialog box, click on the button as indicated below to resynchronize.
11. (Optional) If the expected data from the System Landscape Directory is not updated, then the SLD cache may need to be cleared first.
3.7 Create/configure the Communication Channel for the IDoc receiver adapter.
15. In the Integration Directory, create an IDoc receiver communication channel.
The RFC Destination is from step 3.1.
The Port is from step 3.2.
NOTE:
There is no need to create an IDoc sender Communication Channel for XI. Instead, the backend SAP system must be configure to send the IDoc to XI.
4 Appendix
Transaction: IDX2
There are a couple of situation where IDX2 can be useful on the XI system.
1. When we want to test connection between the XI and SAP backend system.
2. When an IDoc has changed, and the meta data stored in XI needs to be update. When an IDoc is sent from the SAP backend system to XI, XI will first check to see if the meta data for the IDoc is already in its persistent cache. If not, then XI will use the configuration in IDX1 to retrieve the IDoc meta data from the backend system. If the
meta is already in cache, then it will NOT do so. Therefore, when an IDoc has changed, it is necessary to manually update the new meta data on XI, or delete it from the cache, so that the latest version can be retrieved. IDX2 is used for this purpose.
Go to transaction IDX2 and click on Create.
Enter the IDoc Type and the Source Port as defined in step #2. Click Continue.If successful, the following will show up. If error occurs, then the IDX1 configurations will need to be re-checked.
Reward points if find useful. -
Best approach for RFC call from Adapter module
What is the best approach for making a RFC call from a <b>reciever</b> file adapter module?
1. JCo
2. Is it possible to make use of MappingLookupAPI classes to achieve this or those run in the mapping runtime environment only?
3. Any other way?
Has anybody ever tried this? Any pointers????
Regards,
AmolHi ,
The JCo lookup is internally the same as the Jco call. the only difference being you are not hardcoding the system related data in the code. So its easier to maintain during transportation.
Also the JCO lookup code is more readable.
Regards
Vijaya -
Hi all,
Is there any specific role, that should be assigned to the USER, so that he can make RFC calls to BAPIs.
Or by default any USER can make the RFC calls to the BAPIs. For example, I am writing a Java/JCO appliation to call BAPIS. The current user I am using has all the permissions (I guess).
Thanks,
Nagarjuna.Your basis admin should be able to tell you. I know that it would be included in SAPALL. I can't really say, because it can very from system to system.
Regarsds,
Rich Heilman -
'Classic' RFC library - password limited for rfc calls ?
Hi ,
we are using the 'classic' RFC library to connect to SAP for calling RFC function modules. Due to the fact that there are often older SAP systems involed, we use only passwords with 8 digits. But now we have the requirement to use passwords for the rfc user with more than 8 digits. According to my todays knowlede, the password is limited to 8 digits with the standard rfc lib.
Can the newer SAP NW RFC lib handle a password with more than 8 digits ?
But am i right that the SAPNW RFC lib is unable to handle rfc calls with opening a SAPGUI ?
thx
HeikeHi,
thank you for your answer!
I have investigated something new yesterday:
I thought at the beginning, that the problem just occurs, when the system work processes are reached. The system has for example set up 15 dialog processes and the external server is calling the function 20 times in parallel. Then we normally need 5 dialog processes more. The system is taking then all 15 dialog processes and the locks got stucked.
That means, that I´ll maybe only get 4 or 5 uploads, which have really been updated the tables. All the others couldn´t get the table locked for their process.
But if I now let the server call the function just about 13 times in parallel, nearly all uploads have been updated the table!
From my point of view, the lock from SAP gets stucked, when the limit of dialog processes is reached. It´s not working in the right way anymore...
The same is happening, when you set up in the system, that only 10 work proecesses can be used by RFC. If I have more than 10, it´s going to be critical with the locks....
WEIRD!
Can anybody help me out of trouble?
Thank you! -
Hi All,
Can we have use different user IDs to make RFC calls to SAP? Do we have option to call RFC using different users like DEV1, DEV2 etc which is specific to the user logging in to MII. This is required to maintain the change history record while posting data back to SAP
As per the current set up its always user which is configured in SAP server editor in MII, makes the change in SAP.
Any input is appreciable
Thanks in advance
NamitaAjay,
It is like passing any other parameter to your BLS.
For example :
1.In your BLT, create 2 trx params
UserName,Password.
In your Jco Action Block assign these params in the Links Tab of the action.
2. Create a xAcute Query Template wrapping this BLS transaction.Set Param1 as UserName and Param2 as Password.
3. Now in your frontpage screen, create an iCommand applet wrapping the above xAcute Query Template.
4. In your screen have 2 input fields to enter username and password.
In the "OnClick()" event, use the setParam() method to set the values from the Input fields.
Hope this helps. I do not have the resources to give you the code but i think this should work. Let me know if this helps,
Thanks,
Ram -
System update for enhanced calling. Should I install it?
I had a LGG2 and I did the system upgrade a few months ago and it had screwed my phone up ended up having LG replace the phone. Now I have a system update that had been sent to me on this new phone. I have not installed it yet but it is already causing problems with my phone. It is slow to respond, it keeps turning my volume off on my ringer it freezes,and just shuts off. it started right after the update showed up on my phone. I can't imagine what problems will happen if I do install it. Any thoughts? It is obvious to me the system upgrades for this enhanced calling that is a problem. Any thoughts?
If you haven't installed the updates then your problems wouldn't be the update. I'd install it since it has already downloaded, or download if you haven't already. Honestly, install the update and disable the feature on your phone within the settings menu. Instead of having to go online to configure it, the update allows you to enable disable straight from the menu---settings screen. Try it if you want, it's great when it works, but also re-check your voice mail settings as the first time the update installed it changed my basic VM to basic visual vm. To use advanced calling or visual vm you must have data enabled always.
-
XML pay load for RFC call in java mapping
Hi,
I searched in many forums about the payload to be given for RFC Lookup from a functional module,but i think i am not able to get it correct.
Can any one please give me the exact structure of XML Payload to be sent while invoking the function module via RFC LOOKUP
Say i have 2 import parameters(input1,input2) and one output(output1)......
Thanks in advance,
H.L.Babu>
hlbabu123 wrote:
> Hi,
> I searched in many forums about the payload to be given for RFC Lookup from a functional module,but i think i am not able to get it correct.
>
> Can any one please give me the exact structure of XML Payload to be sent while invoking the function module via RFC LOOKUP
>
> Say i have 2 import parameters(input1,input2) and one output(output1)......
>
> Thanks in advance,
> H.L.Babu
have a look at this document - https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439&overridelayout=true
in case u still have issues do get back -
Where used for RFC calls to different system
Hi,
I want to change the interface of a function module which exists in our XI system.
The function is called from R/3 in different places and hence will need to be changed in each location.
Is there an easy way of determining all the different calling points?
The only way I can see would be to run a text search utility against the code.
Thanks,
AlanYou cannot user SE37 and whereused list for this. due RFC available in XI and you need to check for R/3 for whereused points
Try to run the program RS_ABAP_SOURCE_SCAN and in the search string put your function module name and execute
( if it is a custom function module search. in the search pattern use all custom package names)
a®s
Edited by: a®s on Jul 14, 2008 9:24 AM -
RFC Destination for RFC adapters?
What RFC destination is used by RFC receiver adapter?
Hi SSG,
You create remote function call (RFC) destinations on the J2EE engine so that SAP BW can make function calls on remote systems.
Look at these threads.. Shud help u out..
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/76cd3bae738826e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/7c95731a9c5918e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/c6e63b60c25767e10000000a11402f/frameset.htm
cheers,
Prashanth
P.S Please mark helpful answers -
Message mapping transformation error for RFC calls
Hi,
I am having a weird problem. recently client migrated the server and we started getting all possible errors in XI which we are able to fix. Now we have a strange problem in quality system alone where the bapi calls are made from QA11 and MIGO. The bapi call from MIGO is sucessfull but from QA11 it fails with below error
com.sap.aii.utilxi.misc.api.BaseRuntimeException
thrown during application mapping
com/sap/xi/tf/_MP_RFC_PROXY_GOODS_RECEIPT_:
RuntimeException in Message-Mapping transformatio~
I checked in development system and production where it is sucessfull but in quality its failing. I checked the cache and refreshed for confirmation and checked the trace and log files but couldt find any solution. The call made from a test report is also sucesfull but only bapi calls from QA11 are failing.
Note: i am using same bapi in MIGO and QA11 and the integration is same as well. There is no difference in data between 2 transaction just the trigerring point is differenct.
I tested my message mapping, interface mapping and configuration as well with sample payload and they are working fine.
I checked SDN and saw that similar issue is faced by others but no solution is provided.
Regards,
Jayaram
Edited by: JAYARAM MAGANTI on Jun 9, 2009 1:14 PMHi all,
Has anyone ever faced this issue?
i tried all the options that i think of and as a last attempt even restarted XI engine though it makes no sense. but still i am having the same issue.
If anyone had come across similar kindly update the solution
Jayaram
Maybe you are looking for
-
Pass a parameter from BI Dashboard Prompt to BI Publisher Report
Hi. How Can I pass a parameter (value) from BI Dashboard Prompt to BI Publisher Report for an Integrated BI Publisher Report in BI Dashboard? Is there a guide/documentation about this? (10g and 11g) Thank you bye
-
Error in calling external services from CAF
Hello Everybody, I have created one entity services which has remote persistency with RFC. I have mapped operations of entyty service to the RFCs. But when I tried to test this entity service it gives me the error: <b>Error when creating business obj
-
CCMSPING and auto-reaction alert
Hi, helppppp....pleasee..... We have use our solution manager system as the central monitoring system (CEN) for the satellite system In this case, the ccmsping agent is running on the CEN. If the satellite system becomes unavailable, the CEN will aut
-
If I've already deployed caching, how can we evolve to a CDN? TIA Beth
-
Create Customer XD01 in Personas
In Personas under XD01 Create Customer I have merged the tabs like the awesome tutorial said and I have used this method for Change and Display Customer just perfectly, but under Create it seems some of the blocks only show up if you enter the info a