Target value in MIC. Error if result deviates from this

Dear friends,
I want to give only target value in MIC. When results recording deviates from this value then system should give error in valuation field. Is it possible?
Regards
Prashant Atri

Hi,
In SPRO >quality management> Basic setting-->Maintain setting at plant level
Here select your plant click on detail.
Then in next screen in result record tab you have option Recording confugaration where ou can select autamatic close so in this case if result deviate then system will show you pop up window with default rejected radio button on but again here you can clicjk accepetd and valuate.
Or check with other option close,nevigate, save autamatically.
check and revert back.
regards
SANI>L

Similar Messages

PXI Platform Services version on the target appears to be older then 2.0.0 this host only supports targets running PXI Platform Servies 2.0.0 and later Upgarade your target in order to configure its PXI properties from this Host

after formating when tryed to install software to the target this Error Shown
NI PXi 8108
The Selcted Target does not support this function
when I try to add PXi chassis this Error Shown
PXI Platform Services version on the target appears to be older then 2.0.0 this host only supports targets running PXI Platform Servies 2.0.0 and later Upgarade your target in order to configure its PXI properties from this Host
Help me!

Hi Lukas,
I think the problem is caused by differenet drivers for the CAN communication.
NI provides two driver for CAN: NI-CAN and NI-XNET.
NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
You wrote:
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
3. NI_CAN 2.7.3
NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
Regards, stephan

HT4528 I can't seem to sync my iPhone with iTunes. I keep getting this message: iTunes could not connect to the iPhone because an error occurred while reading from this device. What can I do?

I can't seem to sync my iPhone to my computer; I keep getting this message: "iTunes could not connect to the iPhone because an error occurred while reading from this device." I get the same message with my iPad, even though they all share the same account. What can I do?

This could be caused by a USB connection issue. Make sure the iPhone is directly connected to the Mac using the USB cable it came with. Also, try disconnecting all other USB devices.
If you haven't already try resetting the iPhone by holding the Home and Sleep/Wake buttons until you see an Apple logo as described here:http://docs.info.apple.com/article.html?artnum=305743

When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. pleas

When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. please re install of repair the application and try again. I have done this and it's still not working

anomaly jade,
You only need to use the serial number during installation.
Have you, at least seemingly, been able to install, and then you are unable to start up?
If that is the case, you could try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

"An error occured while reading from this device"

"An error occured while reading from this device" is the message I get whenever I try to sync my iPad to iTunes.
The only way I can sync is to do a restore and then put everything back on it.
Can anybody help?

Make sure you also unisntall
Bonjour,
Apple Mobile Device Service,
Quicktime
and there's a couple of others. there are Apple support articles, but I'm sorry I don't have the articles linked. Also ensure you reboot after all of the uninstalls and reboot you iPad as well. This all fixed my laptop, but as I said, my desktop PC is still acting funny.
As your laptop seems older, and the MB link is suspected on a particular group of newer motherboards, so I doubt your laptop motherboard is the common link.
You might want to double check that its USB2 ports.

All SYFY online on demand has error "Content not available from this domain"

I keep getting an error on any SYFY online on demand shows which says "Content not available from this domain." This applies to any show from SYFY that I click on to test. Other channels don't have that error.

Hi,
Thanks for bringing this issue. Yes, the message should be SEVERE. This will be fixed.
You may also want to subscribe to [email protected] and bring up any issues, enhancements.
Regards,
Deepak

Error importing result file from Visual Studio Online load test - Incorrect Syntax near ')'

We are seeing the exact same issue as reported in:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/4a338992-1a46-47ae-9f13-10a53a6264b5/error-downloading-load-test-report-from-visual-studio-service-load-test-incorrect-syntax-near?forum=TFService#cb43383b-c60d-4dcc-a353-352ac6908b35
When clicking on the "Download report" after running a load test using Visual Studio Online an error occurs. The download completes, but the import fails at 15% with the following:
This is happening for 2 different users on 2 different systems.
Any assistance in resolving this would be greatly appreciated!
Let me know if additional information is needed.
Thanks!

Hi,
We are researching your issue. Please clarify my question with detailed information:
1. Do you get the error in your first post when you click ‘Download report’ after you run load test from
Visual Studio 2013 on
team foundation service?
2 You said that ‘I am trying to import the test results into a Visual Studio 2012 (Update 3) on-prem instance’, what and where is
your load test result repository? A SQL Server database or the default database:LoadTest2010 in SQL Express on the same machine with Visual Studio 2013?
3 Whether you specify the load test result repository under Load Test->Manage Test Controller?
4. What error do you get? Please provide us more detailed information about the error message or share us with a screenshot.
5 Whether you can run the load test successfully locally and get the load test result with the same load test result database?
6 You said that your co-worker can work fine. Please check whether your account has enough permissions for load test result database and download load test result from TFS to load test result database based on the account
permission of your co-work.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error in result set from join query

I get a SQL exception from the JDBC thin driver when I make a getXXX( "string" ) call on a result set object when the query is a join. Aliases don't seem to help.
Below is the stack trace.
Anybody have any ideas?
matt
ResultSet.findColumn
java.sql.SQLException: Invalid column name: get_column_index
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:427)
at oracle.jdbc.driver.OracleStatement.get_column_index(OracleStatement.java, Compiled Code)
at oracle.jdbc.driver.OracleResultSet.findColumn(OracleResultSet.java:680)
at person.PersonMgr.getForEdit(PersonMgr.java:114)
at person.PersonMgr.getForView(PersonMgr.java:168)
at person.PersonMgr.getPersonForView(PersonMgr.java:164)
at nwsession.NWSession.login(NWSession.java:224)
at jsp.dologin._jspService(dologin.java:241)
at com.livesoftware.jsp.HttpJSPServlet.service(HttpJSPServlet.java:31)
at com.livesoftware.jsp.JSPServlet.service(JSPServlet.java:129)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:840)
at com.livesoftware.jrun.JRun.runServlet(JRun.java, Compiled Code)
at com.livesoftware.jrun.JRunGeneric.handleConnection(JRunGeneric.java:116)
at com.livesoftware.jrun.service.proxy.JRunProxyServiceHandler.handleRequest(JRunProxyServiceHandler.java, Compiled Code)
at com.livesoftware.jrun.service.ThreadConfigHandler.run(ThreadConfigHandler.java, Compiled Code)

Your reference to NS.REQDATE is too deep. Oracle will only allow you to reference a column from the main query one level deep.
I think you can just change that query into this:
(Select AVG(((cpath.REQUESTDATETIME)- NS.REQDATE)*1440) AvgTime
FROM usersessiondetails cpath
Where cpath.Userkey=(Select Userkey from ods_user where userid=NS.UserId and namespace=NS.Namespace)
   and cpath.acctnum=aCCTNUM
   and cpath.transactionname IN (AUTH_LOGOFF' )
   and cpath.REQUESTDATETIME = NS.REQDATE )You do not need the extra query level to do the AVG.

Error adding Sales order via DI-SERVER Posting Date deviates from the defin

When adding a sales order via the DI-API we have started receiving the following error:
Error: Posting Date deviates from the defined range. To complete the operation, define the posting period to match the entered Posting Date. [(----) 131-204]
I have verified that the posting dates within the document exist within the defined posting periods in SAP and that the posting period in question is unlocked.
I can add the document within the SAP B1 interface without any issues.
This process and code was also working up until the start of the new financial year. There have been no changes to the code or the financial periods in the new year.
There is a peculiarity with the financial periods for this company in that they have moved from calendar periods in the past to financial periods. Has anyone come accross any issues with posting dates and the DI SERVER API?
The dates in the XML document that we are trying to add are shown below.
<Documents>
<row>
<DocDate>20100310</DocDate>
<DocDueDate>20100310</DocDueDate>
<CardCode>C9999</CardCode>
The following are the financial period values from OFPR
Posting Date From/To:       06.03.10     02.04.10
Due Date From/To:            01.01.10     01.04.11
Document Date From/To: 01.01.10     02.04.10
Start of Fiscal Year:         01.01.10
Regards,
Sean

Hi Gordon,
Our customer has moved their financial year end from 1 April / 31 March using calendar months to a 4/4/5 financial period model with a year start date from Jan.
This was necessary after the company was purchased by a US firm that wanted to align the reporting calendars.
Under the 4/4/5 model their financial year start date does not start 1st January. Hence the 3/1/2010 being the first date of the January period.
No matter how the periods are setup the financial year start date in SAP Business One cannot be anything other than the 1st of the month.
All posting within SAP appears to be working fine, it is only via the DI SERVER requests that we seem to be having problems.
However, we suspect that the issue may be unrelated to the posting periods due to some other testing performed.
Regards,
Sean

How can I find the element with the closest value to a calculated "target value" in a 1D array?

Hello all,
may be the following question is very simple, but I am relatively new in labview and it would be great if somebody could help me:
I have a acquaried 1D array of data-points. Now, I have to find the element in this array which value is the closest to a calculated "target value".
After finding the element with the value close to the "target value", I have to get the position of this element (i.e. the index) in the 1D array.
Now, I have to use this index to find and extract the element at this position in an other 1D array.
It would be very nice if somebody could help me with this problem.
Thank you,
beam

Find attached a sample vi that you can modify.
Attachments:
select_target_value.vi ‏22 KB

Quotation with target value (field ZWERT)

Hello
the requirement is to create a sd quotation, which is not based on target qty or order qty!! furthermore I need to have a sd quotation which is based on target value. Is there any way to have this? I tried all the standard quotation types (AG, AV, AS, ...)! All of them are qty based not value based! What can I change in customizing to have it value based? could it be solved by change the field "Screen sequence grp." from AG to WK1 without change any logic for standard quotation reports??
please help...
thx
deniz

For me, it does not make sense. Just from practical approach point of view, a seller would decide his selling price to his end customer based on what off-take they are going to lift. Having said this, to decide the final selling price, you need to know what quantity you are going to sell. You cannot fix the selling price for who orders 10 nos. and sell at the same price for those who orders 1000 nos.
G. Lakshmipathi

No Target values and Ratiings displayeed in SL report

Hi ,
I have configured Service level reporting for R3 system in solution manager, in Key perfromance indicatiors node->target KPI TAb->i have provided teh target values for the KPI's.
The report is generating every week, but in the report for KPI section, i m missing the target values and the ratings in my generated report.
Area Indicator Actual Value Target value Rating Trend
In the above columns i dont see any data/values under target value and rating , though i have already maintained this in set up SL reporting
Anand

Hi Solman Gurus,
Can anyone provide any inputs please
Anand

Date deviates from permissible range

hi all,
I need help for sales order entry.
When I enter sales order entry then I get the error.
Error Is:
Date deviates from permissible range
My Code is :
Document doc = new Document();
                _OrdSer = new OrdersService();
                doc.Address = "ab";
                doc.AgentCode = "ab";
                doc.CardCode = "pmgweb2";
                doc.CardName = "PMG Web Store Test Cust";
                doc.DocDate = DateTime.Parse("2008-02-11");
                doc.DocDueDate = DateTime.Now.Date;
                //doc.TaxDate = DateTime.Parse("2008-02-11");
                doc.DocType = DocumentDocType.dDocument_Service;
                doc.DocumentStatus = DocumentDocumentStatus.bost_Open;
                doc.BaseAmount = 1000;
                doc.DocCurrency = "USD";
                doc.DocNum = 1;
                doc.HandWritten = DocumentHandWritten.tYES;
                MsgHeader msgHeader = new MsgHeader();
                msgHeader.SessionID = _SID;
                msgHeader.ServiceName = MsgHeaderServiceName.OrdersService;
                msgHeader.ServiceNameSpecified = true;
                _OrdSer.MsgHeaderValue = msgHeader;
                DocumentDocumentLine[] d = new DocumentDocumentLine[1];
                d[0] = new DocumentDocumentLine();
                d[0].ItemCode = "9786306243753";
                d[0].ItemDescription = "abc";
                d[0].UnitPrice = 10;
                d[0].Quantity = 4;
                d[0].SerialNum = "1";
                d[0].LineNum = 0;
                d[0].BaseLine = 1;
                d[0].ItemDetails = "abdc";
                d[0].TaxCode = "0";
                DocumentDocumentLineSerialNumber[] dl = new DocumentDocumentLineSerialNumber[1];
                dl[0] = new DocumentDocumentLineSerialNumber();
                dl[0].SystemSerialNumber = 1;
                dl[0].BaseLineNumber = 1;
                dl[0].BatchID = "01";
                d[0].SerialNumbers = dl;
                DocumentDocumentLineBatchNumber[] db = new DocumentDocumentLineBatchNumber[1];
                db[0] = new DocumentDocumentLineBatchNumber();
                db[0].BatchNumber = "01";
                db[0].Quantity = 4;
                d[0].BatchNumbers = db;
                doc.DocumentLines = d;
                _OrdSer.Add(doc);
Please Help Me.
thanks.

Rob,
1st try to add the same sales order with out coding, with the same values. Add it directly frm the SAP UI, and then check for the result.
I guess the problem is in the posting periods and settings related to it, actually there is one setting that tell if we can post documents with earlier dates, plz check that setting.
Vasu Natari.

Distribution channels deviate from each other.70 /or 10 (reference), Message no. V2011

I have a problem when create the "Credit memo request" doc. type CR, reference doc. is billing doc. and my sales doc. that i did the billing doc. sales area is 2100/10/71 and i have to create cr doc with reference to billing doc. and sales area should be 2100/70/99 but while i creating cr doc. with reference to billing doc. system gives error distribution channel deviate from each other 70./or 10 (reference).
I have seen the early post but there where no proper solution on it.
please provide me solution i have to create cr doc. with reference to billing doc. and simply meaning with different distribution channel and division from preceding doc.
Thanks
Regards,
Abhijeet

Hi man,
The thing is that the credit memo with reference is precisely affect the balance of the Customer - Sales Area, imagine a Report by Sales Area saying the total Sales Amount of the Sales Area is 1 million, but then you turn to another sales area and discover that the same customers have credit notes for 1.5 million, insane. The purpose of referencing the credit/debit memos is that, not to lose track, including Sales Areas. Otherwise make no sense to create it with reference, just create a Credit Memo with the customer you want to affect in the sales area you want to affect, no reference. For audit purposes justify the document based on REASON FIELDS and approvals, let me explain this a little more:
One single person CANNOT create Credit Memos, cos this could lead to wrong ethical behavior, to avoid this some companies recommend to have more than one person involved in the process of Credit notes creation, what I've done on this situation is: provide access to one person to CREATE Credit/Debit memos using the standard transaction VA01, in the settings of the Sales Order Type I customize that the document will be created automatically blocked for billing (can use a UserExt to always have this field populated on the creation). This person WONT have access to modify Credit/Debit notes (VA02) but his supervisor will and this supervisor is responsible to approve and modify the blocking field to release the doc for billing. Yes, he can also change the amount but you will already have the log of changes in place for audit purposes.
This is more than a technical issue, a process issue. My kind suggestion is to challenge the business and get clearly why they want to have a referenced Credit Memo without using the Sales Area of the based Billing Doc.
Hope it helps...
Saludos!
Ricardo

Error message in sales order against target value contract

Hi experts
I have value contracts scenario, when I create a Release Orders thatu2019s exceeds the value of the contract the system raise a message error, but in this case the decimal expression in wrong.
The decimal expression of the country is 1.234.567,89
The decimal expression of my user is 1.234.567,89
Example:
The contract value is 10.000
I create a release order for 15.000
The message error is "Target value in contract &1, item &2 is exceeded by 50.00", the correct messages should be: "Target value in contract &1, item &2 is exceeded by 5.000,00"
I release two errors, the decimal expression according to my user and country doesn't match or the validation is doing some conversion.
Do you have any idea was wrong??
Thanks in advanced any input is really appreciated
Susana

Hi Susan.
Just select the error message in the log and click technical info . In the performance assistant it will show like :
Technical Data
Message type__________ E (Error)
Message class_________ ZCRM_CSI_UI (Messages for UI of Leasing)
Message number________ 022
Message variable 1____
Message variable 2____ RK78
Message variable 3____ 0000001000
Message variable 4____ 185124 020(Task:0000003105)
Message Attributes
Level of detail_______
Problem class_________ 1 (very important)
Sort criterion________
Number________________ 1
Environment Information
Object Type___________ 15
Logical Key___________
Object GUID___________ DE3B1C475098F9F187E4002264F648B2
Object Type___________ A
Message class_________
Save message__________ X
Message no longer erro
This will give you details of what internal values are getting used for calculation . If you can give the error message class and error message number probably i can help u out.
Regards
Apoorva

Target value in MIC. Error if result deviates from this

Similar Messages

Maybe you are looking for