Target Value

Dear All:
How can I use the target value of any characteristic as a trigger for an order or a notification?
Thanks

Hefni,
Then you will need to utilise user-exit [IMRC0001|http://pjatkin.users.btopenworld.com/documents/PMCSUserExits.pdf] (MeasPoint/MeasDoc: Exit before update (after COMMIT WORK)) to create a notification.
This must have been done a hundred times before: has anyone got some ABAP code to share?
PeteA

Similar Messages

Contract Version not created when WK Contract (target value) is changed.

Hi there,
Problem with the Version Management on a WK Contract.
When we change the contract targ. value on some of our contracts the new version is not created accordingly. This is only on some of our contracts
Version Mgmnt is correctly configured and the release strategy in place to be triggered when the target value changes. It does work correctly for some contracts.
We receive the following message when we change the targ. value:
"No new version created because a message has not yet been transferred"= Message 027
Can anyone help or advise?
Many thx.

We receive the message on some of the contracts.
Therefore it can't be due to the output

Contract target value

Dear guru.
I have a contract with release strategy.
I change target value and the release strategy is reset.
I have created a purchase order before change contract target value.
If i change the purchase order value the system check if this change exceed the contract target value(EKKO-KTWRT) . But this new value isnu2019t released !!
For me the system must check that the purchase order change exceed the total value at time of release(EKKO-RLWRT).
What do you think about this ?

Thanks ,
but why the system consider contract target value and don't consider contract total value at time of release ?

Contract Target Value to PO

Dear All,
I am having a Service PR with value 2,695,929.00 USD, also one contract with Target Value 7000000 SAR, but in the service specification of contract, value is 5.00 SAR.
Now I had created release order with ref to both PR and Contract, and PO had captured 5.00 SAR from contract service specification. But the buyer had changed the currency as well as value in PO to 2,695,929.00 USD which exeeds contract value. System message 06/042 and SE/347 is set to the status "E". Still for the above process system not showing Error "Target value of contract & exceeded by & &".
Please advice.
Regards

Hi,
As you are for target value set error message {appl 06 and Msg No 155 to "E"(error msg)} in following path:
SPRO->MM> Purchasing> Environment data>Define attibutes of system message-->system message
Regards,
Biju K

Mapping multiple source value to one target value in value mapping

Hello experts,
In my scenario, i need to map more than one source value to one target value in value mapping. Like:
1        TenderPickup
2        TenderLoan
7        TenderPickup
101     TenderPickup
102     TenderLoan
107     TenderPickup
But when I enter the same target value for the second time and try to save it, it gives me an error saying value mapping already exists.
But this should logically be allowed. How can this be done. Please provide a solution.
Thanks,
Yash

Hi Prabhu,
When i right click on the target field, it gives me only 3 options:
1) Insert Row
2) Delete Value Mapping
3) Value Mapping in all agencies
I dont see nay option for duplicating rows.
What I hae done is in ID i clicked on TOOLS and then VALUE MAPPING. I checked the option "Value Mapping Agencies" and gave my source and target agencies detials. Then i clicked on DISPLY and in the next page I have 3 columns - Value for <source agency>, Value for <target agency> and Group name.
When I give duplicate values in the column Vlaue for <target agency>, it doesnt allow me to and if i right click in this column, i get the above mentioend options.
Please point out where i m going wrong.
Thanks,
Yash

Release PO created more than target value in contract

System at times creates release PO even though the accumulated value of released Purchase orders is greater than contract target value. We have the config settings in place to stop this. And it works OK all the time but fails sometimes !. We have batch job in place that runs every 20 minutes to create release POs. We are able to see in the job log (at 2:00 pm run) that system has stopped release PO creation. In the next run (at 2:20 pm), it has created the PO strangely! We checked if there is any change (config, variant, PR, contract) in this 20 minutes time gap between batch job runs but there is not any.
This issue is not replicable. It does not happen often. But couple of weeks back it happened once. And it has happened today. Any pointers would be helpful.
Below is the screenshot of 2:00 pm run
Below is the screenshot of 2:20 pm run

Hi,
It seems the message 06 042 was not issued in 2.20 job run. Hope the issue can be resolved by the KBA: 1929354 - Message 06 042 'Target value of contract & exceeded by & &' or the note: 1590695 - 06042 - target value check in release order fails
Please refer the KBA and revert back.
Regards,
AKPT

Open Target Quantity and Open Target Value in Contract

Hi,
When we execute transaction 'ME3N', it displays the report which is having columns as 'Open Target Quantity' and 'Open Target Value'. I have the similar requirement to read this 'Open Target Quantity' and 'Open Target Value' of contract.
Is there any table which stores these values or is there any function module which gives the value of 'Open Target Quantity' and 'Open Target Value'.
Thanks,
Siddhi

Hi,
Thank you for the reply.
I tried to find that way too. But I was not able to get the table / field for 'Open Target Quantity' or 'Open Target Value'.
Now, I am looking for the logic to get the 'Open Target Quantity' and 'Open Target Value' in contract.
Can anybody please help me with getting this logic?
Thanks,
Siddhi

Only the constants are showing up in the target values.

Hi Guys,
Please help me about my problem in message mapping..
Im quite knew in XI version 7.0.
How come Only the constants are showing up in the target values. my constant values are only doc_type and partn_role.
The rest are data from sql. How can I solve this..Please help.
This is the result of my test tab
Left side - sender
<?xml version="1.0" encoding="utf-8"?>
<ns:MT_TRAVEL_SENDER xmlns:ns="HTTP://TRAVEL.COM/TRANSACTIONS">
   <row>
      <DOC_TYPE>ZTRV</DOC_TYPE>
      <SALES_ORG>4000</SALES_ORG>
      <DISTR_CHAN>40</DISTR_CHAN>
      <DIVISION>41</DIVISION>
      <SALES_GRP>411</SALES_GRP>
      <SALES_OFF>4101</SALES_OFF>
      <PURCH_DATE>2008-10-24</PURCH_DATE>
      <PMNTTRMS>Z015</PMNTTRMS>
      <PURCH_NO_C>AVADIUDS </PURCH_NO_C>
      <PARTN_ROLE>AG</PARTN_ROLE>
      <PARTN_NUMB>0001100074</PARTN_NUMB>
      <INSERTED>1</INSERTED>
   </row>
</ns:MT_TRAVEL_SENDER>
right side -test result under receiver
<?xml version="1.0" encoding="UTF-8"?>
<ns1:BAPI_SALESORDER_CREATEFROMDAT2 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
   <ORDER_HEADER_IN>
      <DOC_TYPE>ZTRV</DOC_TYPE>
   </ORDER_HEADER_IN>
   <ORDER_HEADER_INX>
      <UPDATEFLAG>I</UPDATEFLAG>
      <DOC_TYPE>X</DOC_TYPE>
      <SALES_ORG>X</SALES_ORG>
      <DISTR_CHAN>X</DISTR_CHAN>
      <DIVISION>X</DIVISION>
      <SALES_GRP>X</SALES_GRP>
      <SALES_OFF>X</SALES_OFF>
      <PURCH_DATE>X</PURCH_DATE>
      <PMNTTRMS>X</PMNTTRMS>
      <PURCH_NO_C>X</PURCH_NO_C>
   </ORDER_HEADER_INX>
   <ORDER_PARTNERS>
      <item>
         <PARTN_ROLE>AG</PARTN_ROLE>
      </item>
   </ORDER_PARTNERS>
</ns1:BAPI_SALESORDER_CREATEFROMDAT2>

Hi leelaratnam morampudi ,
How can I check if im getting the data in sql? I think it get the data but dont pass the value in bapi
this is the test result in sender
<DOC_TYPE>ZTRV</DOC_TYPE>
<SALES_ORG>4000</SALES_ORG>
<DISTR_CHAN>40</DISTR_CHAN>
<DIVISION>41</DIVISION>
<SALES_GRP>411</SALES_GRP>
<SALES_OFF>4101</SALES_OFF>
<PURCH_DATE>2008-10-24</PURCH_DATE>
<PMNTTRMS>Z015</PMNTTRMS>
<PURCH_NO_C>AVADIUDS </PURCH_NO_C>
<PARTN_ROLE>AG</PARTN_ROLE>
<PARTN_NUMB>0001100074</PARTN_NUMB>
<INSERTED>1</INSERTED>

How to put identical target value in value mapping table

Hi all ,
         I am implementing a value mapping function .Problem is occuring for repetated target value.for ex: if key is GL001 GL002 GL003 and destination value is 4 5 4 then its creating problem for identical values i.e for both GL001 & GLOO3 its not accepting 4 .Same manner for many diffrent glncode i have identical values.not understanding how to deal with these identical values please guide me as its very urgent.
Regards,
Saurabh

Hi saurabh,
you can try this out....
First you create a value mapping table in ID like:
AWSYS   GLNCODE
GLOO1     10
GLOO2     20
(without GLOO3).
now in your message mapping do the following mapping:
                          Contant[GLOO1]
                               |
                               |(then)
AWSYS-------------> equals---->if----------------->Value Mapping---->GLNCODE
                    |          |(else)
                    |          |
Constant[GLOO3]-----|        AWSYS
**Reward points if helpful...
--Sankar Choudhury

Mapping conversion of source value 4448601.75 to target value 448601

Mapping conversion of source value 4448601.75 to target value 4448601 or source value 999999.99 to target value 999999
Here standard functions like round, floor, ceil..etc, will not work because they will convert source value 4448601.75 to 4448602 and source value 999999.99 to 1000000.
Also i may have blank or white spaces coming in front of the source value from R/3 side like _____999999.99 and i want the value at the target side as _____999999. Here _____ representing blank or white spaces.
How i will do the mapping, can someone help me out.
Thanks,
Ashish
Edited by: Ashish Soni on Sep 6, 2008 9:53 PM

>>Here standard functions like round, floor, ceil..etc, will not work because they will convert source value 4448601.75 to 4448602 and source value 999999.99 to 1000000.
No....! The floor function can be used. It returns the largest integer that is not greater than the passed value. However this will also trim the spaces.
So u can write a UDF that accept the number and substring till the decimal point and returns it.
Try this.. It works..
public String converv(String a,Container container)
return a.substring(0,a.indexOf('.'));
Thanks
SaNv...

Report on OA target value and net value

Hi all,
Is there any standard report that can list out the target value and net value of a number of OA? The values are similar to ME33K -> Header -> Statistics -> General. Thanks.

Thanks all. I had found the answer. It should be transaction ME3L, change layout to select "Released value" and mark the column to show total value.

PO not allowed beyond the target value of contract.

Hi Forum,
I have a Contract, when I create a PO with ref to the Contract, it should not allow the PO to be created beyond the target value of the Contract. Where should I make the configuration settings for this. Whenever the PO created beyond the target value it should give an error and should not allow to proceed further. Please advise.
Thanks in advance.
Ashish

Hi
Please maintain the message as an error
06-042 Target value of contract & exceeded by & &
in SPRO-> IMG-> Material Management-> Purchasing-> Environment Data-> Define Attributes of System Messages

Target value exceed in contract

when i try to creat the service entrysheet by adopting the service details from the contract . then i am getting this error:TARGET VALUE EXCEED"
COULD ANY ONE SOLVE THIS ERROR..kindly suggest the possible way to solve this error..
regards,
Manu

hi Manu,
This message appears when the value maintain at service entry sheet exceeds then that defined at the contract...
As per this i think you have maintain a Value contract.....
Firstly, PLs check the enter value limit in the contract....
Then check the entry sheet, whether you are entering the more value then that defined in the contract....
If yes, then pls correct here and check and save....
This shd resolve your problem....
Hope it helps....
Regards
Priyanka.P

How to make Target Value field mandatory in WK contracts

Dear All,
Can the Target Value field in quantity contracts be set to a mandatory field like in Value contracts?
Regards.

Hi
quantity contracts are used when you would like to limit quantity irrespective of the value of contract. Therefore quantity field is made mandatory here.
similarly value contract is used when you would like to limit value irrespective of quantity of goods.Therefore value field is made mandatory here.
Hope it helps you.

Measuring point wise target value.

Hi,
functionmodule to get Measuring point wise Target value or any db table to get Measuring point wise Target value
--Ganesh

Hello,
If you want to get measurement value from Measuring Point, you can use table IMRG. Reading is at field IMRG-RECDV.
Thanks,
Venu

Entering Source and Target Values in Value Mapping

Hi,
Is there any auomative way of entering source and target values in Value Mapping or FixValues instead of manually entering the values.
I have around 400 values to be entered on both sides.....just thinking of an easy way to do it....
Thanks for suggestions.
Regards,
Bharani

Hi,
Use value mapping replication
chk this link as to what SAP docs say on value mapping replication
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
Value Mapping replication - Value Mapping replication
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
ValueMapping using the Graphical Mapping Tool
The specified item was not found.
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
Regards,
Swathi

Target Value

Similar Messages

Maybe you are looking for