"Target will overwrite..." error in Compressor
Here's the situation:
I am trying to recompress a video using the MPEG-2 60min HQ preset. I drag both the DVD PCM Audio and MPEG-2 presets to the video in the job list.
I've left the Target location as "Source" and hit submit.
If I watch the folder where the source file exists, I see the .aiff file get spit out... and for a brief second, the associated .m2v. Then it DISAPPEARS!
About 5 seconds later, if I go back to my job list, an ERROR triangle appears to the righ tof the Audio line. Clicking on that reports:
"This Target will overwrite an existing file with the same name. To preserve the existing file, change the desitination or change the name of the output file."
OK - so I've tried both of those options... but with no luck. Dumping the files in a location other than the Source doesn't work... and messing with the file names doesn't make a difference! I have also tried to export each individually, and have renamed the files each time.
Any thoughts??
Thanks!
After doing some experimentation, and oddly enough I didn't try this earlier... I took a different kind of file. A pretty large movie using the Apple Photo Jpeg compression. This actually WORKED.
What is still not working is a video with these settings:
AVID Meridien Compressed Codec, 720 x 486, Millions
16-bit Integer (Big Endian), Stereo, 48.000 kHz
The audio exports fine, but not the video. I do have the latest (I think) AVID codec installed, and I'm able to play the movie fine in Quicktime Pro. But, it looks like this may be causing issues in Compressor.
Has anyone encounter this problem?
Message was edited by: Stephen Barrante
Similar Messages
-
Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
RagavHi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak -
I have my iPod touch four since black Friday; November. It's been acting weird lately.
It's randomly crashing. On my photos on videos an none of my friends experience that.
It's been blacking out and freezing and there is a whole load of battery left.
I taken care of it. It has one or two minor scratches and I keep it in the right temperature. (never leave it in my car on a cold Or sunny day.
I bought it in target and I want to exchange it for a new one. I'm sick of it freezing and running extremely slow when I have Four apps. I have less then fourth photos. I have loads of memory. If I exchange it in target will they make me pay a returning fee and if so how much?
Also, I have a app tht I paid 9.99 for (math app) if I return my iPod will it still be on my iTunes so I could redownload it to my new one?
Thanks so much.I would take it to an Apple store, if it's deemed defective you will receive a new one.
Before this make sure you try to reboot, reset, restore
As for the app, you can reload purchases from the cloud but it you should be syncing to iTunes. Also backup your device.
http://support.apple.com/kb/HT2519
http://support.apple.com/kb/HT1766 -
I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
Thanks,
Paul
spid24s Error: 28005, Severity: 16, State: 2
spid24s An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
or you do not have permission.Hi Paul,
I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
So when his AD account got deleted, the database had NULL as owner
Using the following query I asked for the owners of the databases:
select name, suser_sname(sid) from master.dbo.sysdatabases
So changing the owner of the databases that had a NULL owner solved the issue for me.
use <databasesname>
go
exec sp_changedbowner 'sa'
Thanks for triggering the solution.
Peter -
FDM data target system load error
Hi,
I am trying to Load the data from FDM11.1.1.3 to Planning11.1.1.3
I am using Essbase Adapter ES11X-G4-E,I imported data from a csv file ,it is imported success,and Export file was also successfully created,
My question : after this I am getting the error message in another window Target system laod , Error:Invalid use of null
Can you please anybody tell me what is the reasons for getting this error ?
Regards,
SVOne of the values on the Hyperion Essbase Integration Setup tab of the adapter is currently empty. Perform the following
a) Right-Click on the Essbase adpater in the workbench and choose Configure
b) Click on the Hyperion Essbase Integration Setup tab
c)Click on the Load/Check button
d) Verifiy that the List1, List2, and List3 boxes are not empty. These must have values:
List1: 0 -Load
List2: opt1
List3: opt1 -
whene i switch on my iphone i will get message on my disply connect to the itune,whene i connect my iphone 4 to the itune and restore i will get error.plese help me to solve this problem.
Try to connect to iTunes during the setup.
-
HT204135 Printing email to PDF it will overwrite if other file with same name
When printing an email to PDF (in OS X 10.8.2) it will overwrite if another already printet with the same name, this did not happen in older versions. Why?
Hi,
When you create a snapshot you create a snapshot task which (provided you are using a server-side data store) can be run from a job. To refresh the data, run the snapshot task as part of a job. If you create a job with both the snapshot and the process that uses it, they will automatically connect and will 'stream' the data through the snapshot into the process. You can then choose whether actually to write the snapshot or not (for improved performance efficiency if you want to do straight-through processing) by either enabling or disabling the staged data bucket that the snapshot writes to. The snapshot task being in the job means the data will be refreshed.
For design work in Director, you can refresh the snapshot by re-running it manually from the right-click menu.
Regards,
Mike -
What will the error in calltransactionprogram in dat upload?
hi all
what will the error in calltransaction program in dat upload, when that flat file field are not match with the ,internel table fields. what are the common errors occured errors while data uploading by using calltransaction methodfor a transaction.if you declare internal table as like quantity field then you will get short dump so you have declare internal table field as like char type.
and if you mentioned wrong field name with respect screen field then you get valid error message state that
field name is not input field.
Thanks
Seshu -
We use Visual Studio Online and the integrated continuous integration (build server) from Microsoft. We have a solution that contains multiple projects two of which are latest MVC projects. I updated a bunch of our Nuget packages yesterday and now we are
getting a build error one of our MVC projects. Any help is greatly appreciated as I have exhausted my resources trying to understand why the error is occurring!
We use nuget for our external libraries, the solution and projects and set to use Nuget Restore (no packages persisted in TFS).
We updated Angular to the latest version using Nuget updates inside of visual studio. Here an excerpt from packages.config in the project file. The first block is what was found in the packages.config before the update and the second block is after the
update.
<package id="Angular.UI.Bootstrap" version="0.11.0" targetFramework="net451" />
<package id="angularjs" version="1.2.23" targetFramework="net451" />
<package id="Angular.UI.Bootstrap" version="0.12.0" targetFramework="net451" />
<package id="angularjs" version="1.3.8" targetFramework="net451" />
After I noticed the build error I scheduled another build with Diagnostic level logging turned on, here is the excerpt from the build highlighting the errors
Task "Copy" (TaskId:395)
16:42:43.027 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.031 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-animate.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Creating directory "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts". (TaskId:395)
Copying file from "Scripts\angular-aria.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.js". (TaskId:395)
Copying file from "Scripts\angular-aria.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-aria.min.js". (TaskId:395)
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.033 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-cookies.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-csp.css" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.034 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-loader.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\angular-messages.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.js". (TaskId:395)
Copying file from "Scripts\angular-messages.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\angular-messages.min.js". (TaskId:395)
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-mocks.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-resource.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-route.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-sanitize.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-scenario.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.036 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular-touch.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
16:42:43.037 3>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets(182,5): error MSB3030: Could not copy the file "Scripts\angular.min.js" because it was not found. [C:\a\src\Sparco.Cms.Web\Sparco.Cms.Web.csproj]
Copying file from "Scripts\bootstrap-select.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.min.js" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.min.js". (TaskId:395)
Copying file from "Scripts\bootstrap-select.js.map" to "C:\a\bin\_PublishedWebsites\Sparco.Cms.Web\Scripts\bootstrap-select.js.map". (TaskId:395)
I looked at the change log of my check-in and noticed that the errors occur for Angular script references that were updated. New angular references (adds in the TFS changeset) are being copied without errors. Example: angular-animate.js was edited
in the Angular update in TFS but angular-aria.js is a new file in the package so new file in TFS.
Using Source Control Explorer I verified the location of the files, the new and the existing files from the Angular nuget package can all be found in the Scripts folder of the MVC project. I can also view the content of each file file without issue.
The references in the project file (csproj) are all consistent too, I can't see any differences between the files that cause failure and those that do not. The following block is a direct copy/paste from the csproj file
<Content Include="Scripts\angular-animate.js" />
<Content Include="Scripts\angular-animate.min.js" />
<Content Include="Scripts\angular-aria.js" />
<Content Include="Scripts\angular-aria.min.js" />
<Content Include="Scripts\angular-cookies.js" />
<Content Include="Scripts\angular-cookies.min.js" />
<Content Include="Scripts\angular-csp.css" />
<Content Include="Scripts\angular-loader.js" />
<Content Include="Scripts\angular-loader.min.js" />
<Content Include="Scripts\angular-messages.js" />
<Content Include="Scripts\angular-messages.min.js" />
<Content Include="Scripts\angular-mocks.js" />
<Content Include="Scripts\angular-resource.js" />
<Content Include="Scripts\angular-resource.min.js" />
<Content Include="Scripts\angular-route.js" />
<Content Include="Scripts\angular-route.min.js" />
<Content Include="Scripts\angular-sanitize.js" />
<Content Include="Scripts\angular-sanitize.min.js" />
<Content Include="Scripts\angular-scenario.js" />
<Content Include="Scripts\angular-touch.js" />
<Content Include="Scripts\angular-touch.min.js" />
Is there anything I forgot to mention that would help me figure out what is going on?
What else can I try with the exception of rolling back the changeset and re-adding the nuget package?
Thank you very much in advance!
-Igor
-IgorHi Igor,
For your situation, make sure you checked in your source files after updating Angular. You can also check the whether the foders for the Angular reference are under source control in source settings tab of your build definition.
You can also build locally using MSBuild to see if the building works fine. We have to make sure local build succeed before VSO build since TFS build use MSBuild as its default compiler. Check the links below to see if they are helpful:
https://social.msdn.microsoft.com/Forums/en-US/f43ceb9e-f253-46e3-a496-05f8cd77f634/msb3030-could-not-copy-the-file-because-it-was-not-found-error?forum=winappswithcsharp
https://social.msdn.microsoft.com/Forums/en-US/01a29ce7-da2a-40af-9dce-3db1f8998cc2/could-not-copy-the-file-consoleappnameexemanifest-because-it-was-not-found?forum=TFService
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Updated Photoshop, InDesign and Illustrator on 6/18, now nothing will open: Error 16. None of the Error 16 fixes using the SLS Store and Adobe PCD folder permissionms work. Uninstalling and reinstalling doesn't work. Been on the phone with Adobe 5 times since this happened on June 18. Probalby spent 5 hours on the phone with 4 different tech people. I'm waiting for a callback, but the Adobe guy tells me it will be 2 days. Others muct have this same problem....any fixes? HELP!
PS- Also made a new user account and tried opening with that, thinking it was a permissions problem. Still Error 16. Frustrating.....can't work if I don't have the software.DeLisiArt, Which OS do you have? Just make sure you have followed the below article completely. http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
Also, Yes, it is for sure a permission issue. So, i would recommend you to try the below suggestions depending on your OS:
For Windows:
Turn off User Account Control - http://helpx.adobe.com/x-productkb/global/disable-user-account-control-uac.html
Enable the hidden admin account and check if the applications launch fine there - http://social.technet.microsoft.com/wiki/contents/articles/3040.enable-disable-the-local-h idden-built-in-administrator-account-in-windows-7.aspx
For Mac:
Repair Disk Permissions : http://docs.info.apple.com/article.html?path=DiskUtility/11.5/en/7070.html
Enable Root user and check if the applications launch fine there : http://support.apple.com/kb/ht1528 -
How many situation will Aggregate Error occurs in Content Services?
Hi
while uploading files into content services its giving Aggregare error ?
but no category, have the full access and no exceeds to library quota?
how many situalltion will aggregate error occurs in content services while uploading?
how can i resolve this problem in content services.
Thanks in AdvanceTypically aggregate errors are thrown for Bulk operations. A bulk operation is one where you tend to operate on multiple items (Folder, Documents) at a time. FileManager.createDocuments() , FileManager.delete(list of docs) are examples of this.
Ravikiran -
When I tried to use my saved credit card, I made an error & it didn't work. Now, although the error is corrected, I keep getting a message that the card is declined. Can I fix this, or will the error time out?
Hello KGDJ,
Thanks for using Apple Support Communities.
When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message
For more information on this, take a look at:
iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/ts1646
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
Best of luck,
Mario -
Hi i getting will install error when i connect my iphone to computer
this iphone could not be snyced because the computer no longer is authorized for purchased item that are on iphone
-
Since upgrading to ios 8.0.2, airprint will give error (no printer found" After a reboot, it locates and prints, then next time same error code. Any ideas?
Hi bdtcop,
I understand that you are experiencing an issue with AirPrint. Here is an article for you with some troubleshooting steps that may be helpful for resolving this issue:
About AirPrint
http://support.apple.com/kb/ht4356
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Too many Columns in the Cross_Tab will get error
Follow the requirement that will so many Columns in the report , and should use the Corss_Tab,But when the data more than one page ,that will get error:Error formatting Cross-Tag Object.
Is there anybody get the same problem ???Hi Alex,
What version of Crystal Reports are you using (exact Service Pack/Support Pack and Patch)?
If the Crosstab is located on the Group Header or Footer, please see if the resolution from SAP Note: 1214209 helps. This is what it says:
This is a known issue in Crystal Reports and has been assigned Track ID ADAPT00055049.
This occurs because the 'Keep together' option is not selected for the group where the crosstab has been inserted.
To resolve this issue, complete the following steps:
1. From the 'Format' menu, click 'Section'. This launches the 'Section Expert'.
2. Click the group that contains the crosstab and select 'Keep Together'.
3. Click the 'OK' button to close the 'Section Expert' dialog box.
-Abhilash
Maybe you are looking for
-
Crash when generating a glyph vector's shape
When calling a glyph vector's getOutline(), the program crashed and got the following log. Problem happens with Chinese font. What's wrong with it? hs_err_pid3440.log ==================================================================== # An unexpecte
-
Persistent Aggregates bug with logic - anyone else see this ?
A long while ago I posted a bug report regarding the use of aggregates with the Stealthplug guitar audio interface. I also reported this on the apple bug report system. Basically, when using Logic8 with stealthplug and OSX Tiger ( latest 10.4 ) I con
-
No longer can save as "jpg" in elements 6
Nothing has changed on my system, worked fine yesterday, today have limited list of "save as" options in editor - does include jpg 2000 but not jpg. Have uninstalled and reinstalled software - no difference. Have tried different file types but none w
-
X99S Gaming 7 Literally can't install the OS
MOBO: X99S Gaming 7 CPU: i7-5820k RAM: 8gb 2x4gb sticks SSD: Samsung Evo 850 m2 GPU: GTX 770 I'm at my wits end, I can't for the life of me get Windows installed to this machine. I've gotten to the drive chooser for the the Windows installer, but the
-
Finding an idoc number from a given sales document
hi, please send me the code for the finding idoc number for a given sales document. it is urgent............ thanks in advance..........